Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE
register upon non-zero interrupt event level, clear upon zero
event value.
* dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal
by passing zero event value.
(*_io_{read,write}_buffer): Endianness fixes.
* dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes.
(deliver_*_tick): Reduce sim event interval to 75% of count interval.
* interp.c (sim_open): Added jmr3904pal board type that adds PAL-based
serial I/O and timer module at base address 0xFFFF0000.
It is not yet properly tested.
Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: New file - implements tx3904 timer.
* dv-tx3904{irc,cpu}.c: Mild reformatting.
* configure.in: Include tx3904tmr in hw_device list.
* configure: Rebuilt.
* interp.c (sim_open): Instantiate three timer instances.
Fix address typo of tx3904irc instance.
* Followup patch for SCEI PR 15853
* First check-in of TX3904 interrupt controller devices for ECC. [sanitized]
* First implementation of MIPS hardware interrupt emulation.
Mon May 18 18:22:42 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware
modules. Recognize TX39 target with "mips*tx39" pattern.
* configure: Rebuilt.
* sim-main.h (*): Added many macros defining bits in
TX39 control registers.
(SignalInterrupt): Send actual PC instead of NULL.
(SignalNMIReset): New exception type.
* interp.c (board): New variable for future use to identify
a particular board being simulated.
(mips_option_handler,mips_options): Added "--board" option.
(interrupt_event): Send actual PC.
(sim_open): Make memory layout conditional on board setting.
(signal_exception): Initial implementation of hardware interrupt
handling. Accept another break instruction variant for simulator
exit.
(decode_coproc): Implement RFE instruction for TX39.
(mips.igen): Decode RFE instruction as such.
start-sanitize-tx3904
* configure.in (tx3904cpu,tx3904irc): Added devices for tx3904.
* interp.c: Define "jmr3904" and "jmr3904debug" board types and
bbegin to implement memory map.
* dv-tx3904cpu.c: New file.
* dv-tx3904irc.c: New file.
end-sanitize-tx3904
Replace check_op_hilo with check_mult_hilo and check_div_hilo.
Add special r3900 version of do_mult_hilo.
(do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo
with calls to check_mult_hilo.
(do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo
with calls to check_div_hilo.
* common/aclocal.m4: call AM_EXEEXT in SIM_AC_COMMON, define
AM_CYGWIN32 and AM_EXEEXT.
* common/Make-common.in: set EXEEXT, add missing EXEEXTs
to run and install-common rules.
* common/configure: regenerate
And update all subdirectory ChangeLogs and configure files.
o When unpacking an r5900 FP value,
was not treating IEEE-NaN's as very
large values.
o When packing an r5900 FP result from an infinite
precision intermediate value was saturating
to IEEE-MAX instead of r5900-MAX
o The least significant bit of the FP status
register did not stick to one.
[ChangeLog]
Mon Apr 13 16:28:52 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Add proper 1000000 bit-string at top
of VU lower instruction.
VCALLMS-related were found/fixed.
[ChangeLog.sky]
* sky-vu.c ({read,write}_vu_special_reg): Add CMSAR[01] as special
registers for a VU. Behavior not as mandated.
({read,write}_vu_{misc,special}_reg): Create sim_io_error upon
access to unknown register. Behavior not as mandated.
* sky-vu.h (anonymous register numbering enum): Add CMSAR[01].
* sky-libvpe.c (indebug): Cache $ENV{'SKY_DEBUG'}.
[ChangeLog]
* Makefile.in (SIM_SKY_OBJS): Added sky-vudis.o.
* interp.c (decode_coproc): Refer to VU CIA as a "special"
register, not as a "misc" register. Aha. Add activity
assertions after VCALLMS* instructions.
work!
[ChangeLog.sky]
* sky-vu.h (vu_device): Represent "macro instruction just stuffed
into fetch buffer" condition with new "m" bit. Rename old "m" to
"l".
* sky-libvpe.c (indebug): Save snapshot of environment value;
workaround for suspected memory corruption.
(fetch_inst): Respect new "m" macro-instruction flag for reporting
successful fetch to caller.
(exec_inst): Disassemble instruction here instead of fetch time.
Renamed old "m" -> "l" flag in VU state to track interlock
release.
(vpecallms_cycle): Call exec_inst only if fetch_inst did some
work.
* sky-vu.c (vu_attach, vu[01]_device): Revamped initialization to
ensure complete clear of tail part of struct at attach time.
(vu0_busy): Fix thinko.
(vu0_macro_issue): Adapt to new "l" flag.
(vu0_micro_interlock_released): Ditto.
(write_vu_special_reg): Ditto.
(read_vu_special_reg): Compute VBS0/VBS1 bits more explicitly.
The other VU status bits are not yet computed.
[ChangeLog]
* interp.c (decode_coproc): Do not apply superfluous E (end) flag
to upper code of generated VU instruction.
masking facility for PATH3 transfers.
[ChangeLog.sky]
Sun Apr 5 12:11:45 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-libvpe.c (exec-inst): Added "M" bit detection for upper
instruction.
* sky-pke.c (pke_check_stall): Added more assertions.
(pke_code_mskpath3): Use new GPUIF M3P control register.
* sky-pke.h (VU[01]_CIA): New macros that give VU CIA
pseudo-register addresses.
* sky-vu.h (vu_device, VectorUnitState): Merged structs.
(VectorUnitState.mflag): New field.
(VU_REG_{CMSAR0,CMSAR1,FBRST}) Added missing control registers.
* sky-vu.c (vu0_busy): New function.
(vu0_q_busy): New function.
(vu0_macro_issue): New function.
(vu0_micro_interlock_released): New function.
(vu0_busy_in_{micro,macro}_mode): Deleted stubs.
(vu0_macro_hazard_check): Deleted stubs.
(vu_attach): Adapted code to merged device & state struct.
(read_vu_special_reg): Compute VBS0/VBS1 bits in STAT register.
[ChangeLog]
start-sanitize-sky
Sun Apr 5 12:05:44 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (*): Adapt code to merged VU device & state structs.
(decode_coproc): Execute COP2 each macroinstruction without
pipelining, by stepping VU to completion state. Adapted to
read_vu_*_reg style of register access.
* mips.igen ([SL]QC2): Removed these COP2 instructions.
* r5900.igen ([SL]QC2): Transplanted these COP2 instructions here.
* sim-main.h (cop_[ls]q): Enclosed in TARGET_SKY guards.
end-sanitize-sky
into single PKE-style vu.[ch].
[ChangeLog]
Fri Mar 27 16:19:29 1998 Frank Ch. Eigler <fche@cygnus.com>
start-sanitize-sky
* Makefile.in (SIM_SKY_OBJS): Replaced sky-vu[01].o with sky-vu.o.
* interp.c (sim_{load,store}_register): Use new vu[01]_device
static to access VU registers.
(decode_coproc): Added skeleton of sky COP2 (VU) instruction
decoding. Work in progress.
* mips.igen (LDCzz, SDCzz): Removed *5900 case for this
overlapping/redundant bit pattern.
(LQC2, SQC2): Added *5900 COP2 instruction skeleta. Work in
progress.
* sim-main.h (status_CU[012]): Added COP[n]-enabled flags for
status register.
end-sanitize-sky
* interp.c (cop_lq, cop_sq): New functions for future 128-bit
access to coprocessor registers.
* sim-main.h (COP_LQ, COP_SQ): New macro front-ends for above.
[ChangeLog.sky]
* sky-engine.c (engine_run): Adapted from vu[01] -> vu merge.
* sky-hardware.c (register_devices): Ditto
* sky-pke.c (pke_fifo_*): Made these functions private again, now
that the GPUIF code does not use them.
* sky-pke.h (pke_fifo_*): Removed newly private declarations.
* sky-vu.c (*): Major rework: merge of old sky-vu0.c and
sky-vu1.c. Management of two VU devices parallels two PKEs.
Work in progress.
* sky-vu.h (*): Other half of merge.
(vu_device): New struct, parallel to pke_device.
the stand-alone executable.
[in ChangeLog.sky:]
* sky-gpuif.c (call_gs): Call properly into GPU2 library if
configured --with-sim-gpu2. Use SKY_GPU2_REFRESH symbol as
placeholder for future GPU2-refresh policy.
[in ChangeLog:]
* Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added
configurable settings for stand-alone simulator.
start-sanitize-sky
* configure.in: Added --with-sim-gpu2 option to specify path of
sky GPU2 library. Triggers -DSKY_GPU2 for sky-gpuif.c, and
links/compiles stand-alone simulator with this library.
* interp.c (MEM_SIZE): Increased default sky memory size to 16MB.
end-sanitize-sky
* configure.in: Added X11 search, just in case.
* configure: Regenerated.
* Makefile.in (vr4320.igen) : Added.
* configure.in (mips64vr4320-*-*): Added.
* configure : Rebuilt.
* mips.igen : Correct the bfd-names in the mips-ISA model entries.
Add the vr4320 model entry and mark the vr4320 insn as necessary.
little struct.
interp.c: Update. Also add floating point Max/Min functions.
mips.igen: Remove r5900 tag from any floating point instructions.
r5900.igen: Rewrite. Implement *all* floating point insns (except ld/st).
r5400.igen: Tag mdmx functions as being mdmx specific.
update v850, tic80 and mips simulators.
IGEN - Prepend prefix to more generated symbols and macros
(idecode_issue, instruction_word).
IGEN - Add -Wnowith option to supress warnings about word size
inflicts in input files.
MIPS - Clean up Makefile.in, m16.igen, m16.dc (new), m16run.c (new) so
that a mips16 simulator built using IGEN can be compiled.
Use the bfd-processor name in the sim-engine switch.
Add nr_cpus argument to sim_engine_run.
tic80, v850, d30v, mips, common:
Update
mips: Fill in bfd-processor field of model records so that
they match ../bfd/archures.
For sim/mips, enable multi-sim support when mips64vr5400-elf is target.
For sim/igen, allow specification of a default machine (will need
more work later).
(ANDI): Was missing mipsIV model, fix assembler syntax.
(do_c_cond_fmt): New function.
(C.cond.fmt): Handle mips I-III which do not support CC field
separatly.
(bc1): Handle mips IV which do not have a delaed FCC separatly.
(SDR): Mask paddr when BigEndianMem, not the converse as specified
in IV3.2 spec.
(DMULT, DMULTU): Force use of hosts 64bit multiplication. Handle
vr5000 which saves LO in a GPR separatly.
* configure.in (enable-sim-igen): For vr5000, select vr5000
specific instructions.
* configure: Re-generate.
MIPS simulator so that correctly writes the value of CIA back int PC
(the global previously used) when the simulation halts.
Fix implementation of DELAY_SLOT and NULLIFY_NEXT_INSTRUCTION macros.
calls) and sim_open so that they uses the virtual memory data transfer
functions sim_read & sim_write. This eliminates all code (other than
in load_memory & store_memory) that makes assumptions about the
implementation of the underlying memory model.
When address translation of insn fetch fails raise exception immediatly.
Use address_word as type of all address variables (instead of unsigned64),
the former is configured as either 32 or 64 bit type.
Always compile fpu code (no #if has fpu)
Add file sim-hload.c - generic load for hardware only simulators.
Review each simulators sim_open, sim_load, sim_create_inferior so that
they more closely match required behavour.
that image properties such as endianness can be checked.
More strongly document the expected behavour of each of the sim_*
interfaces.
Add default endian argument to simulator config macro
SIM_AC_OPTION_ENDIAN. Use in sim_config.
* interp.c: #include bfd.h.
(target_byte_order): Delete.
(sim_kind, myname, big_endian_p): New static locals.
(sim_open): Set sim_kind, myname. Move call to set_endianness to
after argument parsing. Recognize -E arg, set endianness accordingly.
(sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
load file into simulator. Set PC from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
(set_endianness): Use big_endian_p instead of target_byte_order.
* Make-common.in (CSEARCH): Do not include the gdb directory in
the search path.
* Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
SIM_WARNING): Drop, requiring the simulator specific Makefile.in
to explicitly incorporate these.
* aclocal.m4 (--enable-sim-alignment); New option. Strongly
specify the alignment restrictions of the target architecture -
without this option all alignment restrictions are accomodated.
(--enable-sim-assert): New option. Conditionally compile in
assertion statements.
(--enable-sim-float): New option. Strongly specify the target's
floating point support.
(--enable-sim-hardware): New option. Specify the hardware devices
included in the simulation.
(--enable-sim-packages): New option. Specify the hardware
packages included in the simulation.
(--enable-sim-regparm): New option. Specify that parameters be
passed in registers instead of on the stack.
(--enable-sim-reserved-bits): New option. Specify that reserved
bits within an instruction are are correctly set.
(--enable-sim-smp): New option. Specify the level of SMP support
to be included in the simulator.
(--enable-sim-stdcall): New option. Specify an alternative
function call convention.
(--enable-sim-xor-endian): New option. Configure xor-endian
support used by some targets to implement bi-endian support.
(SignalException): Pass floating point cases to mips16_entry.
(ValueFPR): Don't restrict fmt_single and fmt_word to even
registers.
(StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single
or fmt_word.
(COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR,
and then set the state to fmt_uninterpreted.
(COP_SW): Temporarily set the state to fmt_word while calling
ValueFPR.
scheme which is more compatible with WinGDB builds.
* configure.in: Improve comment on how to run autoconf.
* configure: Re-run autoconf to get new ../common/aclocal.m4.
* Makefile.in: Use autoconf substitution to install common
makefile fragment.
(mips16_entry): New static function.
(SignalException): Look for mips16 entry and exit instructions.
(simulate): Use the correct index when setting fpr_state after
doing a pending move.
force a 64 bit multiplication.
(build_instruction) [OR]: In mips16 mode, don't do anything if the
destination register is 0, since that is the default mips16 nop
instruction.
(build_endian_shift): Don't check proc64.
(build_instruction): Always set memval to uword64. Cast op2 to
uword64 when shifting it left in memory instructions. Always use
the same code for stores--don't special case proc64.
relative operands.
(build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a
jal instruction.
* interp.c (simJALDELAYSLOT): Define.
(JALDELAYSLOT): Define.
(INDELAYSLOT, INJALDELAYSLOT): Define.
(simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared.
* gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits.
* interp.c (CHECKHILO): Define away.
(simSIGINT): New macro.
(membank_size): Increase from 1MB to 2MB.
(control_c): New function.
(sim_resume): Rename parameter signal to signal_number. Add local
variable prev. Call signal before and after simulate.
(sim_stop_reason): Add simSIGINT support.
(sim_warning, sim_error, dotrace, SignalException): Define as stdarg
functions always.
(sim_warning): Delete call to SignalException. Do call printf_filtered
if logfh is NULL.
(AddressTranslation): Add #ifdef DEBUG around debugging message and
a call to sim_warning.
* gencode.c (inst_type): Add mips16 instruction encoding types.
(GETDATASIZEINSN): Define.
(MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add
jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and
mtlo.
(MIPS16_DECODE): New table, for mips16 instructions.
(bitmap_val): New static function.
(struct mips16_op): Define.
(mips16_op_table): New table, for mips16 operands.
(build_mips16_operands): New static function.
(process_instructions): If PC is odd, decode a mips16
instruction. Break out instruction handling into new
build_instruction function.
(build_instruction): New static function, broken out of
process_instructions. Check modifiers rather than flags for SHIFT
bit count and m[ft]{hi,lo} direction.
(usage): Pass program name to fprintf.
(main): Remove unused variable this_option_optind. Change
``*loptarg++'' to ``loptarg++''.
(my_strtoul): Parenthesize && within ||.
* interp.c (sim_trace): If tracefh is NULL, set it to stderr.
(LoadMemory): Accept a halfword pAddr if vAddr is odd.
(simulate): If PC is odd, fetch a 16 bit instruction, and
increment PC by 2 rather than 4.
* configure.in: Add case for mips16*-*-*.
* configure: Rebuild.
* interp.c (sim_monitor): Improved monitor printf
simulation. Tidied up simulator warnings, and added "--log" option
for directing warning message output.
* gencode.c: Use sim_warning() rather than WARNING macro.
INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
(docdir): Removed.
* configure.in (AC_PREREQ): autoconf 2.5 or higher.
(AC_PROG_INSTALL): Added.
(AC_PROG_CC): Moved to before configure.host call.
* configure: Rebuilt.
AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set
stamp-h.
* configure: Rebuild.
* config.in: New file, generated by autoheader.
* interp.c: Include "config.h". Include <stdlib.h>, <string.h>,
and <strings.h> if they exist. Replace #ifdef sun with #ifdef
HAVE_ANINT and HAVE_AINT, as appropriate.
* Makefile.in (run): Use @LIBS@ rather than -lm.
(interp.o): Depend upon config.h.
(Makefile): Just rebuild Makefile.
(clean): Remove stamp-h.
(mostlyclean): Make the same as clean, not as distclean.
(config.h, stamp-h): New targets.
* interp.c (xfer_direct_word, xfer_direct_long,
swap_direct_word, swap_direct_long, xfer_big_word,
xfer_big_long, xfer_little_word, xfer_little_long,
swap_word,swap_long): Added.
* interp.c (ColdReset): Provide function indirection to
host<->simulated_target transfer routines.
* interp.c (sim_store_register, sim_fetch_register): Updated to
make use of indirected transfer routines.
* interp.c (Convert): Provide round-to-nearest and round-to-zero
support for Sun hosts.
* Makefile.in (gencode): Ensure the host compiler and libraries
used for cross-hosted build.
Allow a DOS hosted version of the simulator to be built. NOTE: The FP
is still not complete, since round-to-nearest and round-to-zero have
not been implemented generically.
support.
* interp.c: Added dineroIII, and BSD profiling support. Also
run-time FP handling.
At the moment the options are still mostly build-time controlled,
rather than run-time. Also work still needs to be done to remove (long
long) usage (However this is trivial, just time-consuming).
The out-standing instruction work to be done is in supporting round
and trunc for FP operations, and providing better exception support.
