2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* config/tc-i386.c (i386_align_code): Tune for 32bit nops in
64bit.
(i386_target_format): Set cpu_arch_isa_flags.bitfield.cpulm
for 64bit.
gas/testsuite/
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* gas/i386/i386.exp: Run x86-64-nops-1-pentium.
* gas/i386/x86-64-nops-1-pentium.d: New.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define in terms of
MAX_MEM_ALIGNMENT_BYTES.
* config/tc-arm.c (arm_frag_align_code): Replace hard coded
constant with MAX_MEM_FOR_RS_ALIGN_CODE.
* gas/arm/align64.s: New test case.
* gas/arm/align64.d: Expected disassembly.
* config/tc-arm.c (md_assemble): Added validation.
gas/testsuite
* gas/arm/thumb-w-bad.d: New test case.
* gas/arm/thumb-w-bad.l: New file.
* gas/arm/thumb-w-bad.s: New file.
* gas/arm/thumb-w-good.d: New test case.
* gas/arm/thumb-w-good.s: New file.
(set_it_insn_type_nonvoid): New macro.
(emit_thumb32_expr): New function.
(thumb_insn_size): New function.
(emit_insn): New function.
(s_arm_elf_inst): New function.
(md_pseudo_table): New pseudo-opcode entries added.
* doc/c-arm.texi: New directive added.
* gas/arm/inst-po.d: New testcase.
* gas/arm/inst-po.s: New file.
* gas/arm/inst-po-2.d: New testcase.
* gas/arm/inst-po-2.s: New file.
* gas/arm/inst-po-2.l: New file.
* gas/arm/inst-po-3.d: New testcase.
* gas/arm/inst-po-3.s: New file.
* gas/arm/inst-po-be.d: New testcase.
* arm-dis.c (coprocessor): Print the LDC and STC versions of the
LFM and SFM instructions as comments,.
Improve consistency of formatting for instructions displayed as
comments and decimal values displayed with their hexadecimal
equivalents.
Formatting tidy ups.
Updated expected disassembler regexps.
* arm-dis.c (enum opcode_sentinels): New: Used to mark the
boundary between variaant and generic coprocessor instuctions.
(coprocessor): Use it.
Fix architecture version of MCRR and MRRC instructions.
(arm_opcdes): Fix patterns for STRB and STRH instructions.
(print_insn_coprocessor): Check architecture and extension masks.
Print a hexadecimal version of any decimal constant that is
outside of the range of -16 to +32.
(print_arm_address): Add a return value of the offset used in the
adress, if it is worth printing a hexadecimal version of it.
(print_insn_neon): Print a hexadecimal version of any decimal
constant that is outside of the range of -16 to +32.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
PR 10297
* arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
of an undefined instruction.
(arm_opcodes): Use it.
(thumb_opcod): Use it.
(thumb32_opc): Use it.
Update expected disassembly regrexps in GAS and LD testsuites.
(implicit_it_mode): New global.
(it_instruction_type): New enum.
(arm_parse_it_mode): New function.
(arm_long_opts): New option added.
(arm_it): New field.
(it_state): New enum.
(now_it): New macro.
(check_it_blocks_finished): New function.
(insns[]): Use the IT Thumb opcodes for ARM too.
(arm_cleanup): Call check_it_blocks_finished.
(now_it_compatible): New function.
(conditional_insn): New function.
(set_it_insn_type): New macro.
(set_it_insn_type_last): New macro.
(do_it): Call automatic IT machinery functions.
(do_t_add_sub): Likewise
(do_t_arit3): Likewise.
(do_t_arit3c): Likewise.
(do_t_blx): Likewise.
(do_t_branch): Likewise.
(do_t_bkpt): Likewise.
(do_t_branch23): Likewise.
(do_t_bx): Likewise.
(do_t_bxj): Likewise.
(do_t_cps): Likewise.
(do_t_cpsi): Likewise.
(do_t_cbz): Likewise.
(do_t_it): Likewise.
(encode_thumb2_ldmstm): Likewise.
(do_t_ldst): Likewise.
(do_t_mov_cmp): Likewise.
(do_t_mvn_tst): Likewise.
(do_t_mul): Likewise.
(do_t_neg): Likewise.
(do_t_setend): Likewise.
(do_t_shift): Likewise.
(do_t_tb): Likewise.
(output_it_inst): New function.
(new_automatic_it_block): New function.
(close_automatic_it_block): New function.
(now_it_add_mask): New function.
(it_fsm_pre_encode): New function.
(handle_it_state): New function.
(it_fsm_post_encode): New function.
(force_automatic_it_block_close): New function.
(in_it_block): New function.
(md_assemble): Call automatic IT block machinery functions.
(arm_frob_label): Likewise.
(arm_opts): New element.
* config/tc-arm.h (it_state): New enum.
(current_it): New struct.
(arm_segment_info_type): New member added.
* doc/c-arm.texi: New option -mimplicit-it documented.
* gas/arm/arm-it-auto.d: New test.
* gas/arm/arm-it-auto.s: New file.
* gas/arm/arm-it-auto-2.d: New test case.
* gas/arm/arm-it-auto-2.s: New file.
* gas/arm/arm-it-auto-3.d: New test case.
* gas/arm/arm-it-auto-3.s: New file.
* gas/arm/arm-it-bad.d: New test case.
* gas/arm/arm-it-bad.l: New file.
* gas/arm/arm-it-bad.s: New file.
* gas/arm/arm-it-bad-2.d: New test case.
* gas/arm/arm-it-bad-2.l: New file.
* gas/arm/arm-it-bad-2.s: New file.
* gas/arm/arm-it-bad-3.d: New test case.
* gas/arm/arm-it-bad-3.l: New file.
* gas/arm/arm-it-bad-3.s: New file.
* gas/arm/thumb2_it_auto.d: New test.
* gas/arm/thumb2_it_bad.l: Error message updated.
* gas/arm/thumb2_it_bad_auto.d: New test.
* gas/arm/thumb2_it.d: Comment added.
* gas/arm/thumb2_it_bad.d: Comment added.
* gas/tc-arm.c (do_t_ssat): Move common code from here...
(do_t_usat): ... and here to...
(do_t_ssat_usat): New function: ... here. Add code to check that
the shift value, if present, is in range.
* gas/arm/thumb2_bad_reg.s: Add tests for SSAT and USAT with an
out of range shift.
* gas/arm/thumb2_bad_reg.l: Update expected error messages.
* arm-dis.c (print_insn_coprocessor): Check that a user specified
ARM architecture supports the matched instruction.
(print_insn_arm): Likewise.
(select_arm_features): New function. Fills in the fields of an
arm_feature_set structure based on a given arm machine number.
(print_insn): Initialise an arm_feature_set structure.
* objdump.c (disassemble_bytes): Set the
USER_SPECIFIED_MACHINE_TYPE flag in the disassemble_info structure
if the user has invoked the -m switch.
* doc/binutils.texi: Document the additional behaviour of
objdump's -m switch for ARM targets.
* dis-asm.h (USER_SPECIFIED_MACHINE_TYPE): New value for the flags
field of struct disassemble_info.
* gas/arm/align.s: Add labels so that COFF based targets can
correctly locate THUMB code.
* gas/arm/copro.d: Do not pass --architecture switch to objdump.
* arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
instruction.
* gas/arm/thumb32.d: Fix expected binary value of SEV.W instruction.
* config/tc-arm.c (T16_32_TAB): Fix binary value of SEV.W
instruction.
* config/tc-mips.c (nops_for_vr4130): Don't check noreorder_p.
(nops_for_insn): Likewise.
gas/testsuite/
* gas/mips/vr4130.s, gas/mips/vr4130.d: Expect part A to have nops.
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* cofflink.c (process_embedded_commands): Ignore "-aligncomm".
==> gas/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* NEWS: Mention new feature.
* config/obj-coff.c (obj_coff_common_parse): New function.
(obj_coff_comm): Likewise.
(coff_pseudo_table): Override default ".comm" definition on PE.
* doc/as.texinfo: Document new feature.
==> gas/testsuite/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* gas/pe/: New directory for PE format-specific tests.
* gas/pe/aligncomm-a.d: New test pattern file.
* gas/pe/aligncomm-a.s: New test source file.
* gas/pe/aligncomm-b.d: New test pattern file.
* gas/pe/aligncomm-b.s: New test source file.
* gas/pe/aligncomm-c.d: New test pattern file.
* gas/pe/aligncomm-c.s: New test source file.
* gas/pe/aligncomm-d.d: New test pattern file.
* gas/pe/aligncomm-d.s: New test source file.
* gas/pe/pe.exp: New test control script.
* lib/gas-defs.exp (is_pecoff_format): New function.
==> ld/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* NEWS: Mention new feature.
* deffile.h (def_file_aligncomm): Add new struct definition.
(def_file): Add new def_file_aligncomm member.
* deffilep.y (%token): Add new ALIGNCOMM token.
(command): Add production rule for ALIGNCOMM.
(def_file_free): Free any chained def_file_aligncomm structs.
(diropts[]): Add entry for '-aligncomm' .drectve command.
(def_aligncomm): New grammar function.
* ld.texinfo: Document new feature.
* pe-dll.c (process_def_file): Rename from this ...
(process_def_file_and_drectve): ... to this, updating all callers,
and process any aligncomms chained to the def file after scanning
all .drectve sections.
(generate_edata): Updated to match.
(pe_dll_build_sections): Likewise.
==> ld/testsuite/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* ld-pe/aligncomm-1.c: New test source file.
* ld-pe/aligncomm-2.c: Likewise.
* ld-pe/aligncomm-3.c: Likewise.
* ld-pe/aligncomm-4.c: Likewise.
* ld-pe/aligncomm.d: New test pattern file.
* ld-pe/direct.exp: Deleted, and content moved into ...
* ld-pe/pe-run.exp: ... New common file for all PE run tests.
* ld-pe/vers-script.exp: Deleted, and content merged into ...
* ld-pe/pe-compile.exp: ... New common file for PE tests needing
a compiler, adding aligned common tests.
* ld-pe/pe.exp: Update header comment.
* config/tc-armeabi.h (FPU_DEFAULT): Likewise.
* config/tc-arm.c (md_begin): If FPU_DEFAULT is set, don't infer
the default FPU from the processor.
testsuite/
* gas/arm/attr-mcpu.d: Add -mfpu=neon.
* gas/arm/mapmisc.d: Correct expected output for .double and
.dcb.d.
2009-04-15 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (process_operands): Print operands in
correct order depending on intel_syntax.
gas/testsuite/
2009-04-15 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.e: Adjust expectations.
* ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
"tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
Reorder entries so the extended mnemonics are listed before tlbilx.
gas/testsuite/
* gas/ppc/e500mc.d: Update to match extended mnemonics.
gas/
* config/tc-arm.c (md_apply_fix): Check BFD_RELOC_ARM_IMMEDIATE and
BFD_RELOC_ARM_ADRL_IMMEDIATE value is in the correct section.
Check BFD_RELOC_ARM_ADRL_IMMEDIATE has a defined symbol.
gas/testsuites/
* gas/arm/adr-invalid.d: New file.
* gas/arm/adr-invalid.l: New file.
* gas/arm/adr-invalid.s: New file.
(do_t_mov_cmp): Permit R13 as the second
argument to "cmp.n".
* gas/arm/thumb2_bad_reg.s: Update to allow R13 as second argument
for CMP.
* gas/arm/thumb2_bad_reg.l: Adjust accordingly.
* gas/ppc/e500mc.d ("lfdepx", "stfdepx"): Fix tests to expect a
floating point register.
opcodes/
* ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
operand to be a float point register (FRT/FRS).
* mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
dmfc2 and dmtc2 before the architecture-level variants.
gas/testsuite/
* gas/mips/octeon.s: Add more tests for dmfc2 and dmtc2.
* gas/mips/octeon.d: Update.
* gas/mips/octeon-ill.l: Update error message.
* gas/ppc/booke.s ("dcbt", "dcbtst"): New tests.
* gas/ppc/booke.d: Likewise.
* gas/ppc/power4_32.s: Likewise.
* gas/ppc/power4_32.d: Likewise.
opcodes/
* ppc-opc.c: Update copyright year.
(powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
ordering for POWER4 and later and use the correct Server ordering.
2009-01-29 Paul Brook <paul@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
* config/tc-arm.c (do_t_mul): In Thumb-2 mode, use 16-bit encoding
of MUL when possible.
gas/testsuite:
2009-01-29 Paul Brook <paul@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
* gas/arm/thumb2_mul.s: New file.
* gas/arm/thumb2_mul.d: Likewise.
* gas/arm/thumb2_mul-bad.s: Likewise.
* gas/arm/thumb2_mul-bad.d: Likewise.
* gas/arm/thumb2_mul-bad.l: Likewise.
* gas/arm/t16-bad.s: Add tests for"mul" with high registers.
* gas/arm/t16-bad.l: Update accordingly.
* gas/all/gas.exp: Expect forward test to fail for MeP.
Expect relax test to fail for MeP.
* gas/mep/relocs.d: Update expected disassembly.
* lib/ld-lib.exp (check_gc_sections_available): Add MeP to list of
targets which do not support garbage collection.
* ld-srec/srec.exp (run_srec_test): Expect tests to fail for MeP.
* ld-elf/group8a.d: Likewise.
* ld-elf/group8b.d: Likewise.
* ld-elf/group9a.d: Likewise.
* ld-elf/group9b.d: Likewise.
* binutils-all/objdump.W: Do not assume that high and low PC
addresses will have been computed.
sequence containing an unsupported reloc type.
(enum options): Replace computed #define's constants for option
numbers with this enum.
(struct md_longopts): Use the enum. Allow OPTION_32 in a non-ELF
environment.
(md_parse_option): Allow -32 in a non-ELF environment.
* gas/lib/gas-defs.exp: Update description of run_dump_test proc.
* gas/mips/dli.d: Pass -64 to gas.
* gas/mips/mips64-mips3d-incl.d: Likewise.
* gas/mips/octeon.d: Likewise.
* gas/mips/sb1-ext-mdmx.d: Likewise.
* gas/mips/sb1-ext-ps.d: Likewise.
* gas/mips/e32el-rel2.s: Pass -march=mips3 to gas.
Update expected relocs.
* gas/mips/ld-ilocks-addr32.d: Do not run for tx39 targets.
* gas/mips/mips.exp: Remove 'ilocks' variable.
Add ecoff targets to 'addr32' variable.
Set 'no_mips16' for ecoff targets.
Do not run div-ilocks or mul-ilocks test variants.
* gas/mips/mips16-intermix.d: Use nm instead of objdump so that
the symbol table output is sorted. Update expecetd output.
gas/
* config/tc-arm.c (attributes_set_explicitly): New array.
(s_arm_eabi_attribute): Check return value from s_vendor_attribute.
(cpu_arch): Add ARM_ARCH_V5T.
(aeabi_set_attribute_int): New function.
(aeabi_set_attribute_string): New function.
(aeabi_set_public_attributes): Set attributes according to the user's
intentions, rather than the actual state of the binary.
Use aeabi_set_attribute_int and aeabi_set_attribute_string instead of
bfd_elf_add_proc_attr_int and bfd_elf_add_proc_attr_string.
Support WMMXv2. Use attribute names instead of numbers.
* read.c (s_vendor_attribute): Change return type to int.
Return the tag number that was set.
* read.h (s_vendor_attribute): Change return type to int.
gas/testsuite/
* gas/arm/attr-cpu-directive.d: New file.
* gas/arm/attr-cpu-directive.s: New file.
* gas/arm/attr-default.d: New file.
* gas/arm/attr-march-all.d: New file.
* gas/arm/attr-march-armv1.d: New file.
* gas/arm/attr-march-armv2.d: New file.
* gas/arm/attr-march-armv2a.d: New file.
* gas/arm/attr-march-armv2s.d: New file.
* gas/arm/attr-march-armv3.d: New file.
* gas/arm/attr-march-armv3m.d: New file.
* gas/arm/attr-march-armv4.d: New file.
* gas/arm/attr-march-armv4t.d: New file.
* gas/arm/attr-march-armv4txm.d: New file.
* gas/arm/attr-march-armv4xm.d: New file.
* gas/arm/attr-march-armv5.d: New file.
* gas/arm/attr-march-armv5t.d: New file.
* gas/arm/attr-march-armv5te.d: New file.
* gas/arm/attr-march-armv5tej.d: New file.
* gas/arm/attr-march-armv5texp.d: New file.
* gas/arm/attr-march-armv5txm.d: New file.
* gas/arm/attr-march-armv6-m.d: New file.
* gas/arm/attr-march-armv6.d: New file.
* gas/arm/attr-march-armv6j.d: New file.
* gas/arm/attr-march-armv6k.d: New file.
* gas/arm/attr-march-armv6kt2.d: New file.
* gas/arm/attr-march-armv6t2.d: New file.
* gas/arm/attr-march-armv6z.d: New file.
* gas/arm/attr-march-armv6zk.d: New file.
* gas/arm/attr-march-armv6zkt2.d: New file.
* gas/arm/attr-march-armv6zt2.d: New file.
* gas/arm/attr-march-armv7-a.d: New file.
* gas/arm/attr-march-armv7-m.d: New file.
* gas/arm/attr-march-armv7-r.d: New file.
* gas/arm/attr-march-armv7.d: New file.
* gas/arm/attr-march-armv7a.d: New file.
* gas/arm/attr-march-armv7m.d: New file.
* gas/arm/attr-march-armv7r.d: New file.
* gas/arm/attr-march-iwmmxt.d: New file.
* gas/arm/attr-march-iwmmxt2.d: New file.
* gas/arm/attr-march-xscale.d: New file.
* gas/arm/attr-mcpu.d: New file.
* gas/arm/attr-mfpu-arm1020e.d: New file.
* gas/arm/attr-mfpu-arm1020t.d: New file.
* gas/arm/attr-mfpu-arm1136jf-s.d: New file.
* gas/arm/attr-mfpu-arm1136jfs.d: New file.
* gas/arm/attr-mfpu-arm7500fe.d: New file.
* gas/arm/attr-mfpu-fpa.d: New file.
* gas/arm/attr-mfpu-fpa10.d: New file.
* gas/arm/attr-mfpu-fpa11.d: New file.
* gas/arm/attr-mfpu-fpe.d: New file.
* gas/arm/attr-mfpu-fpe2.d: New file.
* gas/arm/attr-mfpu-fpe3.d: New file.
* gas/arm/attr-mfpu-maverick.d: New file.
* gas/arm/attr-mfpu-neon-fp16.d: New file.
* gas/arm/attr-mfpu-neon.d: New file.
* gas/arm/attr-mfpu-softfpa.d: New file.
* gas/arm/attr-mfpu-softvfp+vfp.d: New file.
* gas/arm/attr-mfpu-softvfp.d: New file.
* gas/arm/attr-mfpu-vfp.d: New file.
* gas/arm/attr-mfpu-vfp10-r0.d: New file.
* gas/arm/attr-mfpu-vfp10.d: New file.
* gas/arm/attr-mfpu-vfp3.d: New file.
* gas/arm/attr-mfpu-vfp9.d: New file.
* gas/arm/attr-mfpu-vfpv2.d: New file.
* gas/arm/attr-mfpu-vfpv3-d16.d: New file.
* gas/arm/attr-mfpu-vfpv3.d: New file.
* gas/arm/attr-mfpu-vfpxd.d: New file.
* gas/arm/attr-order.d: Update Tag_ARM_ISA_use and Tag_THUMB_ISA_use.
* gas/arm/attr-override-cpu-directive.d: New file.
* gas/arm/attr-override-cpu-directive.s: New file.
* gas/arm/attr-override-mcpu.d: New file.
* gas/arm/attr-override-mcpu.s: New file.
* gas/arm/blank.s: New file.
* gas/arm/eabi_attr_1.d: Update Tag_ARM_ISA_use and Tag_THUMB_ISA_use.
ld/testsuite/
* ld-arm/attr-merge-3.attr: Update following gas change.
* ld-arm/attr-merge-2.attr: Update Tag_ARM_ISA_use and
Tag_THUMB_ISA_use following gas changes.
* ld-arm/attr-merge-4.attr: Likewise.
* ld-arm/attr-merge-5.attr: Likewise.
* ld-arm/attr-merge-arch-1.attr: Likewise.
* ld-arm/attr-merge-arch-2.attr: Likewise.
* ld-arm/attr-merge-unknown-2.d: Likewise.
* ld-arm/attr-merge-unknown-2r.d: Likewise.
* ld-arm/attr-merge-unknown-3.d: Likewise.
* ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-00.d: Likewise.
* ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-02.d: Likewise.
* ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-04.d: Likewise.
* ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-20.d: Likewise.
* ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-22.d: Likewise.
* ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-40.d: Likewise.
* ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-44.d: Likewise.
* ld-arm/attr-merge.attr: Likewise.
Daniel Jacobowitz <dan@codesourcery.com>
gas/
* config/tc-arm.c (arm_copy_symbol_attributes): New function.
* config/tc-arm.h (arm_copy_symbol_attributes): New prototype.
(CONVERT_SYMBOLIC_ATTRIBUTE): New define.
* read.c (s_vendor_attribute): Add support for symbolic tag names.
Improve string parser.
* doc/c-arm.texi (ARM Machine Directives): Document
.eabi_attribute symbolic tag names.
gas/testsuite/
* gas/arm/attr-syntax.d: New file.
* gas/arm/attr-syntax.s: New file.
* ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
* ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
operand form and enable the four operand form for POWER6 and later.
<mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
three operand form for POWER6 and later.
gas/testsuite/
* gas/ppc/power6.s ("mtfsf", "mtfsf.", "mtfsfi", "mtfsfi."): Add tests.
* gas/ppc/power6.d: Likewise.
* common.h (STT_IFUNC): Define.
elfcpp/
* elfcpp.h (enum STT): Add STT_IFUNC.
bfd/
* syms.c (struct bfd_symbol): Add new flag BSF_INDIRECT_FUNCTION.
Remove redundant flag BFD_FORT_COMM_DEFAULT_VALUE. Renumber flags
to remove gaps.
(bfd_print_symbol_vandf): Return 'i' for BSF_INDIRECT_FUNCTION.
(bfd_decode_symclass): Likewise.
* elf.c (swap_out_syms): Translate BSF_INDIRECT_FUNCTION into
STT_IFUNC.
(elf_find_function): Treat STT_IFUNC in the same way as STT_FUNC.
(_bfd_elf_is_function_type): Likewise.
* elf32-arm.c (arm_elf_find_function): Likewise.
(elf32_arm_adjust_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_additional_program_headers): Likewise.
* elf32-i386.c (is_indirect_symbol): New function.
(elf_i386_check_relocs): Also generate dynamic relocs for
relocations against STT_IFUNC symbols.
(allocate_dynrelocs): Likewise.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (is_indirect_symbol): New function.
(elf64_x86_64_check_relocs): Also generate dynamic relocs for
relocations against STT_IFUNC symbols.
(allocate_dynrelocs): Likewise.
(elf64_x86_64_relocate_section): Likewise.
* elfcode.h (elf_slurp_symbol_table): Translate STT_IFUNC into
BSF_INDIRECT_FUNCTION.
* elflink.c (_bfd_elf_adjust_dynamic_reloc_section): Add support
for STT_IFUNC symbols.
(get_ifunc_reloc_section_name): New function.
(_bfd_elf_make_ifunc_reloc_section): New function.
* elf-bfd.h (struct bfd_elf_section_data): Add indirect_relocs field.
* bfd-in2.h: Regenerate.
gas/
* config/obj-elf.c (obj_elf_type): Add support for STT_IFUNC type.
* doc/as.texinfo: Document new feature.
* NEWS: Mention new feature.
gas/testsuite/
* gas/elf/type.s: Add test of STT_IFUNC symbol type.
* gas/elf/type.e: Update expected disassembly.
* gas/elf/elf.exp: Update grep of symbol types.
ld/
* NEWS: Mention new feature.
* pe-dll.c (process_def_file): Replace use of redundant
BFD_FORT_COMM_DEFAULT_VALUE with 0.
* scripttempl/elf.sc: Add .rel.ifunc.dyn and .rela.ifunc.dyn
sections.
ld/testsuite/
* ld-mips-elf/reloc-1-n32.d: Updated expected output for reloc
descriptions.
* ld-mips-elf/reloc-1-n64.d: Likewise.
* ld-i386/ifunc.d: New test.
* ld-i386/ifunc.s: Source file for the new test.
* ld-i386/i386.exp: Run the new test.
for FP instructions.
testsuite/
* gas/mips/mips1-fp.s, testsuite/gas/mips/mips1-fp.d,
testsuite/gas/mips/mips1-fp.l: New tests.
* gas/mips/mips.exp: Run them.
* config/tc-xtensa.c (xtensa_j_opcode): New.
(xg_instruction_matches_option_term): Handle "FREEREG" option.
(xg_build_to_insn): Likewise. Update renamed tls_reloc reference.
(md_begin): Initialize xtensa_j_opcode.
(md_assemble): Update renamed tls_reloc reference. Handle "j.l".
(xg_assemble_vliw_tokens): Save free_reg info in the frag.
(tinsn_immed_from_frag): Get free_reg info back out of the frag.
(vinsn_to_insnbuf): Update renamed tls_reloc references.
Distinguish extra argument for "FREEREG" from extra TLS argument.
* config/tc-xtensa.h (struct xtensa_frag_type): Add free_reg field.
* config/xtensa-istack.h (struct tinsn_struct): Rename tls_reloc
field to extra_arg.
* config/xtensa-relax.c (widen_spec_list): Add rules to relax "j.l".
(build_transition): Handle "FREEREG" operand.
* config/xtensa-relax.h (enum op_type): Add OP_FREEREG.
2008-11-04 Bob Wilson <bob.wilson@acm.org>
* gas/xtensa/all.exp: Run jlong test.
* gas/xtensa/jlong.d: New.
* gas/xtensa/jlong.s: New.
* config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
gas/testsuite/
* gas/mips/cfi-n64-1.s, gas/mips/cfi-n64-1.d: New test.
* gas/mips/mips.exp: Run it.
2008-08-28 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_assemble): Force number of displacement
operands to zero when processing string instruction.
(i386_index_check): Special-case string instruction operands. Don't
fudge address prefix if there already was a memory operand. Fix
error message to correctly reflect the addressing mode used.
(i386_att_operand): Fix comment.
(i386_intel_operand): Snapshot, clear, and restore base and index
reg for each operand processed. Increment count of memory operands
later.
gas/testsuite/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/string-bad.{l,s}, gas/i386/string-ok.{d,e,s}: New.
* gas/i386/i386.exp: Run new tests.
for DW_CFA_offset_extended_sf results. Allow for differing nops.
* gas/cfi/cfi-hppa-1.d: Invert data alignment sign. Change
offsets to match 64-bit offsets.
* gas/cfi/cfi.exp: Don't run common tests on hppa64.
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
Maxim Kuvyrkov <maxim@codesourcery.com>
* elf32-mips.c (mips_vxworks_copy_howto_rela): Replace with...
(elf_mips_copy_howto): ...this howto. Clear the size fields.
(mips_vxworks_jump_slot_howto_rela): Replace with...
(elf_mips_jump_slot_howto): ...this howto.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_plt_readonly): Define.
(elf_backend_plt_sym_val): Define for non-VxWorks targets.
(mips_vxworks_bfd_reloc_type_lookup): Delete.
(mips_vxworks_bfd_reloc_name_lookup): Likewise.
(mips_vxworks_rtype_to_howto): Likewise.
(elf_backend_want_dynbss): Don't define for VxWorks.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_got_symbol_offset): Don't define.
* elfn32-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_n32_rtype_to_howto): Handle R_MIPS_COPY and
R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elf64-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf64_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf64_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf64_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Delete.
(_bfd_mips_elf_use_plts_and_copy_relocs, _bfd_mips_elf_init_stubs)
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): Declare.
* elfxx-mips.c (mips_elf_la25_stub): New structure.
(LA25_LUI, LA25_J, LA25_ADDIU): New macros.
(mips_elf_link_hash_entry): Add "la25_stubs", "has_static_relocs"
and "has_nonpic_branches" fields. Remove "is_relocation_target" and
"is_branch_target".
(mips_elf_link_hash_table): Add blank lines. Add
"use_plts_and_copy_relocs", "reserved_gotno", "strampoline",
"la25_stubs" and "add_stub_section" fields.
(mips_htab_traverse_info): New structure.
(PIC_OBJECT_P, MIPS_ELF_LOAD_WORD): New macros.
(MIPS_RESERVED_GOTNO): Delete.
(mips_o32_exec_plt0_entry, mips_n32_exec_plt0_entry)
(mips_n64_exec_plt0_entry, mips_exec_plt_entry): New tables.
(mips_elf_link_hash_newfunc): Update after the changes to
mips_elf_link_hash_entry.
(mips_elf_check_mips16_stubs): Replace the DATA parameter with
an INFO parameter. Don't look through warnings symbols here;
do it in mips_elf_check_symbols instead.
(mips_elf_create_stub_symbol): New function.
(mips_elf_la25_stub_hash, mips_elf_la25_stub_eq): New functions.
(_bfd_mips_elf_init_stubs, mips_elf_local_pic_function_p): Likewise.
(mips_elf_add_la25_intro, mips_elf_add_la25_trampoline): Likewise.
(mips_elf_add_la25_stub, mips_elf_check_symbols): New functions.
(mips_elf_gotplt_index): Check for VxWorks.
(mips_elf_output_dynamic_relocation): Take the relocation index
as an extra parameter. Do not increment reloc_count here.
(mips_elf_initialize_tls_slots): Update the calls to
mips_elf_output_dynamic_relocation accordingly.
(mips_elf_multi_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Don't allocate reserved GOT
entries here. Unconditionally create .got.plt, but don't
set its alignment here.
(mips_elf_relocation_needs_la25_stub): New function.
(mips_elf_calculate_relocation): Redirect branches and jumps to
a non-PIC stub if one exists. Check !h->has_static_relocs instead
of !htab->is_vxworks when deciding whether to create dynamic
relocations for R_MIPS_32, R_MIPS_REL32 and R_MIPS_64.
(_bfd_mips_elf_create_dynamic_sections): Unconditionally call
_bfd_elf_create_dynamic_sections. Unconditionally set up
htab->splt and htab->sdynbss. Set htab->srelplt to ".rel.plt"
if !htab->is_vxworks. Add non-VxWorks values of
htab->plt_header_size and htab->plt_entry_size.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
non-branch static relocations. Set has_nonpic_branches when an la25
stub might be required. Set can_make_dynamic_p to TRUE if R_MIPS_32,
R_MIPS_REL32 and R_MIPS_64 relocations can be made dynamic,
rather than duplicating the condition. Do not make them dynamic
for read-only sections in non-PIC executable objects.
Do not protect this code with dynobj == NULL || htab->sgot == NULL;
handle each group of cases separately. Add a default case that
sets has_static_relocs for non-GOT relocations that cannot be
made dynamic. Don't set is_relocation_target and is_branch_target.
Reject non-PIC static relocations in shared objects.
(_bfd_mips_vxworks_adjust_dynamic_symbol): Fold into...
(_bfd_mips_elf_adjust_dynamic_symbol): ...here, using
htab->use_plts_and_copy_relocs instead of htab->is_vxworks
to select PLT and copy-reloc handling. Set the alignment of
.plt and .got.plt when allocating the first entry. Generalize
code to handle REL as well as RELA sections and 64-bit as well as
32-bit GOT entries. Complain if we find a static-only reloc
against an externally-defined symbol and if we cannot create
dynamic relocations for it. Allocate copy relocs using
mips_elf_allocate_dynamic_relocations on non-VxWorks targets.
Set possibly_dynamic_relocs to 0 when using PLTs or copy relocs.
Skip reserved .got.plt entries.
(_bfd_mips_elf_always_size_sections): Use mips_elf_check_symbols
instead of mips_elf_check_mips16_stubs to process each symbol.
Do the traversal for relocatable objects too.
(mips_elf_lay_out_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(_bfd_mips_elf_size_dynamic_sections): Exclude sdynbss if it
is empty. Extend the DT_PLTREL, DT_JMPREL and DT_PLTRELSZ handling
to non-VxWorks targets. Only add DT_REL{,A}, DT_REL{,A}SZ and
DT_REL{,A}ENT if .rel.dyn is nonempty. Create a symbol for the
PLT. Allocate a nop at the end of the PLT. Allocate DT_MIPS_PLTGOT.
(mips_elf_create_la25_stub_info): New function.
(_bfd_mips_elf_finish_dynamic_symbol): Write out PLT entries
and copy relocs where necessary. Check pointer_equality_needed.
(mips_finish_exec_plt): New function.
(_bfd_mips_elf_finish_dynamic_sections): Always set DT_PLTGOT
to the beginning of htab->sgot. Use htab->reserved_gotno instead
of MIPS_RESERVED_GOTNO. Assert htab->use_plts_and_copy_relocs
instead of htab->is_vxworks for DT_PLTREL, DT_PLTRELSZ and DT_JMPREL.
Set DT_PLTREL to DT_REL instead of DT_RELA on non-VxWorks targets.
Use mips_finish_exec_plt to create non-VxWorks PLT headers. Set
DT_MIPS_PLTGOT.
(_bfd_mips_elf_copy_indirect_symbol): Copy has_static_relocs
from the indirect symbol to the direct symbol. Also copy
has_nonpic_branches for indirect symbols.
(_bfd_mips_elf_get_target_dtag): Handle DT_MIPS_PLTGOT and
DT_MIPS_RWPLT.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): Set
use_plts_and_copy_relocs to TRUE. Use TRUE rather than 1
when setting is_vxworks.
(_bfd_mips_elf_use_plts_and_copy_relocs): New function.
(_bfd_mips_elf_final_link): Call mips_elf_create_la25_stub for
each la25_stub.
(_bfd_mips_elf_merge_private_bfd_data): Treat dynamic objects
as PIC. Generalize message about linking PIC and non-PIC.
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): New
functions.
* reloc.c: Update comment near BFD_RELOC_MIPS_JUMP_SLOT.
* bfd-in2.h: Regenerated.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
* readelf.c (get_mips_symbol_other): Handle STO_MIPS_PLT and
STO_MIPS_PIC.
(slurp_rela_relocs, slurp_rel_relocs): Handle MIPS ELF64 here.
(dump_relocations, debug_apply_relocations): Don't handle it here.
(get_mips_dynamic_type): Handle DT_MIPS_PLTGOT and DT_MIPS_RWPLT.
(print_mips_pltgot_entry): New function.
(process_mips_specific): Dump the PLT GOT.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
(OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
(OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
(OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
(md_longopts): Add -call_nonpic.
(md_parse_option): Handle OPTION_CALL_NONPIC.
(md_show_usage): Add -call_nonpic.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
* gas/mips/call-nonpic-1.s, gas/mips/call-nonpic-1.d: New test.
* gas/mips/mips.exp: Run it.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Mark Shinwell <shinwell@codesourcery.com>
* mips.h (STO_MIPS_PLT, ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT)
(STO_MIPS_PIC, DT_MIPS_PLTGOT, DT_MIPS_RWPLT): New macros.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* emulparams/elf32bmip.sh (GOT): Define, moving .got.plt to...
(OTHER_RELRO_SECTIONS, OTHER_READWRITE_SECTIONS): ...one of these
two variables.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emultempl/mipself.em: Include ldctor.h, elf/mips.h and elfxx-mips.h.
(is_mips_elf): New macro.
(stub_file, stub_bfd): New variables.
(hook_stub_info): New structure.
(hook_in_stub): New function.
(mips_add_stub_section): Likewise.
(mips_create_output_section_statements): Likewise.
(mips_before_allocation): Likewise.
(real_func): New variable.
(mips_for_each_input_file_wrapper): New function.
(mips_lang_for_each_input_file): Likewise.
(lang_for_each_input_file): Define.
(LDEMUL_BEFORE_ALLOCATION): Likewise.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Likewise.
2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
Daniel Jacobowitz <dan@codesourcery.com>
* ld-mips-elf/mips16-pic-3a.s,
ld-mips-elf/mips16-pic-3b.s,
ld-mips-elf/mips16-pic-3.dd,
ld-mips-elf/mips16-pic-3.gd,
ld-mips-elf/mips16-pic-3.rd,
ld-mips-elf/mips16-pic-3.inc,
ld-mips-elf/pic-and-nonpic-1a.s,
ld-mips-elf/pic-and-nonpic-1b.s,
ld-mips-elf/pic-and-nonpic-1.ld,
ld-mips-elf/pic-and-nonpic-1.dd,
ld-mips-elf/pic-and-nonpic-1.nd,
ld-mips-elf/pic-and-nonpic-1-rel.dd,
ld-mips-elf/pic-and-nonpic-1-rel.nd,
ld-mips-elf/pic-and-nonpic-2a.s,
ld-mips-elf/pic-and-nonpic-2b.s,
ld-mips-elf/pic-and-nonpic-2.d,
ld-mips-elf/pic-and-nonpic-3a.s,
ld-mips-elf/pic-and-nonpic-3a.ld,
ld-mips-elf/pic-and-nonpic-3a.dd,
ld-mips-elf/pic-and-nonpic-3a.gd,
ld-mips-elf/pic-and-nonpic-3a.sd,
ld-mips-elf/pic-and-nonpic-3b.s,
ld-mips-elf/pic-and-nonpic-3b.ld,
ld-mips-elf/pic-and-nonpic-3b.ad,
ld-mips-elf/pic-and-nonpic-3b.dd,
ld-mips-elf/pic-and-nonpic-3b.gd,
ld-mips-elf/pic-and-nonpic-3b.nd,
ld-mips-elf/pic-and-nonpic-3b.pd,
ld-mips-elf/pic-and-nonpic-3b.rd,
ld-mips-elf/pic-and-nonpic-3b.sd,
ld-mips-elf/pic-and-nonpic-3-error.d,
ld-mips-elf/pic-and-nonpic-4a.s,
ld-mips-elf/pic-and-nonpic-4b.s,
ld-mips-elf/pic-and-nonpic-4b.ld,
ld-mips-elf/pic-and-nonpic-4b.ad,
ld-mips-elf/pic-and-nonpic-4b.dd,
ld-mips-elf/pic-and-nonpic-4b.gd,
ld-mips-elf/pic-and-nonpic-4b.nd,
ld-mips-elf/pic-and-nonpic-4b.rd,
ld-mips-elf/pic-and-nonpic-4b.sd,
ld-mips-elf/pic-and-nonpic-4-error.d,
ld-mips-elf/pic-and-nonpic-5a.s,
ld-mips-elf/pic-and-nonpic-5b.s,
ld-mips-elf/pic-and-nonpic-5b.ld,
ld-mips-elf/pic-and-nonpic-5b.ad,
ld-mips-elf/pic-and-nonpic-5b.dd,
ld-mips-elf/pic-and-nonpic-5b.gd,
ld-mips-elf/pic-and-nonpic-5b.nd,
ld-mips-elf/pic-and-nonpic-5b.rd,
ld-mips-elf/pic-and-nonpic-5b.sd,
ld-mips-elf/pic-and-nonpic-5b.pd,
ld-mips-elf/pic-and-nonpic-6.ld,
ld-mips-elf/pic-and-nonpic-6-o32a.s,
ld-mips-elf/pic-and-nonpic-6-o32b.s,
ld-mips-elf/pic-and-nonpic-6-o32c.s,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.pd,
ld-mips-elf/pic-and-nonpic-6-o32.rd,
ld-mips-elf/pic-and-nonpic-6-o32.sd,
ld-mips-elf/pic-and-nonpic-6-n32a.s,
ld-mips-elf/pic-and-nonpic-6-n32b.s,
ld-mips-elf/pic-and-nonpic-6-n32c.s,
ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.pd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n32.sd,
ld-mips-elf/pic-and-nonpic-6-n64a.s,
ld-mips-elf/pic-and-nonpic-6-n64b.s,
ld-mips-elf/pic-and-nonpic-6-n64c.s,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.pd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-n64.sd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* reloc.c (BFD_RELOC_MIPS16_GOT16, BFD_RELOC_MIPS16_CALL16): Declare.
* libbfd.h, bfd-in2.h: Regenerate.
* elf32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_reloc_map): Add mappings.
* elf64-mips.c (mips16_elf64_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_elf64_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfn32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(elf_mips16_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfxx-mips.c (mips_elf_create_shadow_symbol): New function.
(section_allows_mips16_refs_p): Likewise.
(mips16_stub_symndx): Likewise.
(mips_elf_check_mips16_stubs): Treat the data argument as a
bfd_link_info. Mark every dynamic symbol as needing MIPS16 stubs
and create a "shadow" symbol for the original MIPS16 definition.
(mips16_reloc_p, got16_reloc_p, call16_reloc_p, hi16_reloc_p)
(lo16_reloc_p, mips16_call_reloc_p): New functions.
(_bfd_mips16_elf_reloc_unshuffle): Use mips16_reloc_p to generalize
relocation checks.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Handle R_MIPS16_GOT16.
(mips_elf_got16_entry): Add comment.
(mips_elf_calculate_relocation): Use hi16_reloc_p,
lo16_reloc_p, mips16_call_reloc_p, call16_reloc_p and got16_reloc_p
to generalize relocation checks. Use section_allows_mips16_refs_p
instead of mips16_stub_section_p. Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16, allowing the former to refer directly to a
MIPS16 function if its stub is not needed.
(mips16_stub_section_p): Delete.
(_bfd_mips_elf_symbol_processing): Convert odd-valued function
symbols into even MIPS16 symbols.
(mips_elf_add_lo16_rel_addend): Use mips16_reloc_p to generalize
a relocation check.
(_bfd_mips_elf_check_relocs): Calculate "bed" and "rel_end"
earlier in the function. Use mips16_stub_symndx to identify
the target function. Avoid out-of-bounds accesses when the
stub has no relocations; report an error instead. Use
section_allows_mips16_refs_p instead of mips16_stub_section_p.
Use mips16_call_reloc_p and got16_reloc_p to generalize relocation
checks. Handle R_MIPS16_CALL16 and R_MIPS16_GOT16. Don't create
dynamic relocations for absolute references to __gnu_local_gp.
(_bfd_mips_elf_always_size_sections): Pass a bfd_link_info as
the argument to mips_elf_check_mips16_stubs. Generalize comment.
(_bfd_mips_elf_relocate_section): Use hi16_reloc_p and got16_reloc_p
to generalize relocation checks.
(_bfd_mips_elf_finish_dynamic_symbol): If a dynamic MIPS16 function
symbol has a non-MIPS16 stub, redirect the symbol to the stub.
Fix an overly long line. Don't give dynamic symbols type STO_MIPS16.
(_bfd_mips_elf_gc_sweep_hook): Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16.
gas/
* config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
(lo16_reloc_p): New functions.
(reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
generalize relocation checks.
(matching_lo_reloc): New function.
(fixup_has_matching_lo_p): Use it.
(mips16_mark_labels): Don't clobber a symbol's visibility.
(append_insn): Use hi16_reloc_p and lo16_reloc_p.
(mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
(md_apply_fix): Likewise.
(mips16_percent_op): Add %got and %call16.
(mips_frob_file): Use got16_reloc_p to generalize relocation checks.
Use matching_lo_reloc.
(mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
generalize relocation checks.
(mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
checks.
gas/testsuite/
* gas/mips/elf-rel8-mips16.d, gas/mips/elf-rel8-mips16.s,
* gas/mips/elf-rel9-mips16.d, gas/mips/elf-rel9-mips16.s,
* gas/mips/elf-rel13-mips16.d, gas/mips/elf-rel13-mips16.s: New tests.
* gas/mips/mips.exp: Run them.
ld/testsuite/
* ld-mips-elf/mips16-local-stubs-1.d: Remove stub_for_h3,
which was only referenced by the .pdr section, and was not
actually needed by code.
* ld-mips-elf/mips16-intermix.d: Remove unused static function stubs.
* ld-mips-elf/mips16-pic-1a.s,
ld-mips-elf/mips16-pic-1b.s,
ld-mips-elf/mips16-pic-1-dummy.s,
ld-mips-elf/mips16-pic-1.dd,
ld-mips-elf/mips16-pic-1.gd,
ld-mips-elf/mips16-pic-1.inc,
ld-mips-elf/mips16-pic-1.ld,
ld-mips-elf/mips16-pic-2a.s,
ld-mips-elf/mips16-pic-2b.s,
ld-mips-elf/mips16-pic-2.ad,
ld-mips-elf/mips16-pic-2.dd,
ld-mips-elf/mips16-pic-2.gd,
ld-mips-elf/mips16-pic-2.nd,
ld-mips-elf/mips16-pic-2.rd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* gas/mips/mips32-cp2.s: ... to here.
* gas/mips/mips32.d: Update.
* gas/mips/mips32-cp2.d: New file.
* gas/mips/mips32r2.s: Move out coprocessor2 insns from here ...
* gas/mips/mips32r2-cp2.s: ... to here.
* gas/mips/mips32r2.d: Update.
* gas/mips/mips32r2-cp2.d: New file.
* gas/mips/mips64.s: Move out coprocessor2 insns from here ...
* gas/mips/mips64-cp2.s: ... to here.
* gas/mips/mips64.d: Update.
* gas/mips/mips64-cp2.d: New file.
* gas/mips/mips.exp: Run mips32-cp2, mips32r2-cp2 and mips64-cp
except for Octeon.
* gas/mips/octeon.s: Add supported coprocessor insns. Move pop
down to keep alphabetical order.
* gas/mips/octeon.d: Update.
* gas/mips/octeon-ill.s: Add unsupported coprocessor insns.
* gas/mips/octeon-ill.l: Update.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
* config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
with non-MIPS16 relocs.
gas/testsuite/
* gas/mips/mips16-hilo-match.s: New test.
* gas/mips/mip16-hilo-match.d: New test output.Index: config/tc-mips.c
* gas/mips/mips4-fp.s: ... to here.
* gas/mips/mips4.d: Update.
* gas/mips/mips4-fp.l: New file. Check error messages with
-msoft-float.
* gas/mips/mips4-fp.d: New file. Check disassembly with
hard-float.
* gas/mips/mips32r2.s: Split out fp instructions from here ...
* gas/mips/mips32r2-fp32.s: ... to here.
* gas/mips/mips32r2.d: Update.
* gas/mips/mips32r2-fp32.l: New file. Check error messages with
-msoft-float.
* gas/mips/mips32r2-fp32.d: New file. Check disassembly with
hard-float.
* gas/mips/mips32r2-ill-nofp.s, gas/mips/mips32r2-ill-nofp.l: New
test derived from mips32r2-ill.
* gas/mips/mips32-sf32.l: New list test for mips32-sf32.s to check
error messages for soft-float targets.
* gas/mips/mips-macro-ill-sfp.s, gas/mips/mips-macro-ill-sfp.l:
New test for -msingle-float.
* gas/mips/mips-macro-ill-nofp.s, gas/mips/mips-macro-ill-nofp.l:
New test for -msoft-float.
* gas/mips/mips-hard-float-flag.s,
gas/mips/mips-hard-float-flag.l: New test for -mhard-float.
* gas/mips/mips-double-float-flag.s,
gas/mips/mips-double-float-flag.l: New test for -mdouble-float.
* gas/mips/mips.exp: Run new mips4-fp and mips32r2-fp dump tests.
Run mips4-fp and mips32r2-fp list tests with -msoft-float. Run
new mips32r2-ill-nofp with -msoft-float. Run new mips32-sf32 list
test with -msoft-float. Run new mips-macro-ill-sfp test with
-msingle-float. Run new mips-macro-ill-nofp test with
-msoft-float. Run new mips-hard-float-flag and
mips-double-float-flag tests.
listings such as gas version, passed options, and time stamp.
(listing_general_info): New function.
(print_options): New function.
(print_single_option): New function.
(print_timestamp): New function.
(MAX_DATELEN): Define.
(listing_print): Add call to listing_general_info.
* listing.h (LISTING_GENERAL): Define.
(listing_print): Add new parameter.
* as.c (show_usage): Print new switch.
(parse_args): Parse new switch.
(main): Pass command line on to listing_print.
* NEWS: Mention this new feature.
* doc/as.texinfo: Document the new sub-option.
* gas/all/gas.exp: Check the performance of the -ag command line
switch.
* s390-mkopc.c (s390_cond_ext_format): Add back the mnemonic
extensions for conditional jumps (o, p, m, nz, z, nm, np, no).
(s390_crb_extensions): New extensions table.
(insertExpandedMnemonic): Handle '$' tag.
* s390-opc.txt: Remove conditional jump variants which can now
be expanded automatically.
Replace '*' tag with '$' in the compare and branch instructions.
2008-04-10 Andreas Krebbel <krebbel1@de.ibm.com>
* gas/s390/zarch-z10.d: Map the compare and branch variants
with odd condition code mask to version with an even mask.
* config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
* gas/sh/sh64/eh-1.d: New.
* gas/sh/sh64/eh-1.d: Likewise.
* config/tc-bfin.c (bfin_start_line_hook): Localize the labels
generated for LOOP_BEGIN and LOOP_END instructions.
(bfin_gen_loop): Likewise.
gas/testsuite/:
* gas/bfin/flow.d: Adjust since the generated labels for LOOP_BEGIN
and LOOP_END instruction are local now.
* gas/bfin/flow2.d: Likewise.
* config/bfin-parse.y (check_macfunc_option): Allow (IU)
option for multiply and multiply-accumulate to data register
instruction.
(check_macfuncs): Don't check if accumulator matches the data register
here.
(assign_macfunc): Check if accumulator matches the
data register in each rule that moves to the data
register.
gas/testsuite/
* gas/bfin/arithmetic.s, gas/bfin/arithmetic.d: Add check
for IU option.
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s:
Add check for mismatch of accumulator and data register.
opcodes/
* bfin-dis.c (decode_dsp32mac_0): Decode (IU) option for
multiply and multiply-accumulate to data register instruction.
* config/bfin-parse.y (check_macfunc_option): New.
(check_macfuncs): Check option by calling check_macfunc_option.
Fix comparison always true warnings. Both scalar instructions
of vector instruction must share the same mode option. Only allow
option mode at the end of the second instruction of the vector.
(asm_1): Check option by calling check_macfunc_option.
gas/testsuite/:
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s: Add
tests for bad options of "multiply and multipy-accumulate to
accumulator" instructions. Add new vector instruction option
mode tests.
* gas/bfin/vector2.s: Add new vector instruction option mode test.
* gas/bfin/vector2.d: Adjust accordingly.
* gas/bfin/expected_errors.s, gas/bfin/expected_errors.l: Add test
for mismatched half registers in vector multipy-accumulate
instructions.
From Jie Zhang <jie.zhang@analog.com>
* config/bfin-parse.y (asm_1): Check AREGS in comparison
instructions. And call yyerror () when comparing PREG with
DREG.
gas/testsuite/:
* gas/bfin/expected_comparison_errors.l: New test.
* gas/bfin/expected_comparison_errors.s: New test.
* gas/bfin/bfin.exp: Add expected_comparison_errors.
* read.c (s_mexit): Warn if attempting to exit a macro when not
inside a macro definition.
* gas/macros/exit.s: New test case.
* gas/macros/macros.exp: Run the new test, expect it to produce an
error result.
* h8300.h (h8_opcodes): Add an encoding for a mov.l instruction
with a 32-bit displacement but without the top bit of the 4th byte
set.
* gas/h8300/pr3134.s: New test.
* gas/h8300/pr3134.d: Expected disassembly
* gas/h8300/h8300.exp: Run the new test.
* gas/h8300/h8300-coff.exp: Fix test for COFF based ports to
accept h8300-rtemscoff not just h8300-rtems.
2008-02-18 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (match_template): Disallow 'l' suffix when
currently selected CPU has no 32-bit support.
(parse_real_register): Do not return registers not available on
currently selected CPU.
gas/testsuite/
2008-02-18 Jan Beulich <jbeulich@novell.com>
* gas/i386/att-regs.s, gas/i386/att-regs.d,
gas/i386/intel-regs.s, gas/i386/intel-regs.d: New.
* gas/i386/i386.exp: Run new tests.
* config/tc-arm.c (s_arm_unwind_save): Advance the input line
pointer past the comma after parsing a floating point register
name.
* gas/arm/fp-save.s: New test.
* gas/arm/fp-save.d: Expected disassembly.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_real_register): Don't return 'FLAT'
if not in Intel mode.
(i386_intel_operand): Ignore segment overrides in immediate and
offset operands.
(intel_e11): Range-check i.mem_operands before use as array
index. Filter out FLAT for uses other than as segment override.
(intel_get_token): Remove broken promotion of "FLAT:" to mean
"offset FLAT:".
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.s: Replace invalid offset expression with
valid ones.
* gas/i386/x86_64.s: Likewise.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-opc.h (RegFlat): New.
* i386-reg.tbl (flat): Add.
* i386-tbl.h: Re-generate.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (allow_pseudo_reg): New.
(parse_real_register): Check for NULL just once. Allow all
register table entries when allow_pseudo_reg is non-zero.
Don't allow any registers without type when allow_pseudo_reg
is zero.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
(tc_x86_frame_initial_instructions): Adjust for above change.
* config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
(tc_parse_to_dw2regnum): New.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
* dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
(cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
error handling.
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/cfi/cfi-i386.s: Add code testing use of all registers.
Fix a few comments.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/cfi/cfi-i386.d, gas/cfi/cfi-x86_64.d: Adjust.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-gen.c (process_i386_registers): Process new fields.
* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
unsigned char. Add dw2_regnum and Dw2Inval.
* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
register names.
* i386-tbl.h: Re-generate.
2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/nops.s: Add more tests with opcodes from 0x0f19
to 0x0f1f.
* gas/i386/x86-64-nops.s: Likewise.
* gas/i386/nops.d: Updated.
* gas/i386/x86-64-nops.d: Likewise.
opcodes/
2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
(REG_0F18): Updated.
(reg_table): Updated.
(dis386_twobyte): Updated. Use "nopQ" on 0x19 to 0x1e.
(twobyte_has_modrm): Set 1 for 0x19 to 0x1e.
* dwarf2dbg.c (out_sleb128): Delete.
(size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
(out_fixed_inc_line_addr): Delete.
(relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
(dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
(process_entries): Remove calls to out_fixed_inc_line_addr. When
DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
* read.h (emit_expr_fix): New prototype.
* read.c (emit_expr): Move code to emit_expr_fix and use it here.
(emit_expr_fix): New.
testsuite/
* gas/lns/lns.exp: Run new lns-big-delta test for targets that set
DWARF2_USE_FIXED_ADVANCE_PC.
* gas/lns/lns-big-delta.s: New.
* gas/lns/lns-big-delta.d: New.
PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
* gas/ppc/altivec_and_spe.s: New test - checks that ISA extension
command line options (-maltivec, -mspe) can be specified before
CPU selection command line options.
* gas/ppc/altivec_and_spe.d: Expected disassembly.
* gas/ppc/ppc.exp: Run the new test
2007-12-22 H.J. Lu <hongjiu.lu@intel.com>
* doc/binutils.texi: Document the new intel-mnemonic and
intel-mnemonic options for i386 disassembler.
gas/testsuite/
2007-12-22 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/compat-intel.d: New file.
* gas/i386/compat.d: Likewise.
* gas/i386/compat.s: Likewise.
* gas/i386/i386.exp: Run compat.
opcodes/
2007-12-22 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (intel_mnemonic): New.
(print_i386_disassembler_options): Display att-mnemonic and
intel-mnemonic options.
(print_insn): Handle att-mnemonic and intel-mnemonic.
(float_reg): Replace SYSV386_COMPAT with "!M" and "M".
(putop): Handle "!M" and "M".
* config/tc-xtensa.c (xg_symbolic_immeds_fit): Relax for weak
references but not weak definitions.
gas/testsuite/
* gas/xtensa/all.exp: Run new weak-call test.
* gas/xtensa/weak-call.d: New.
* gas/xtensa/weak-call.s: New.
the symbol's section is the undefined section.
* gas/testsuite/gas/elf/symtab.s: New test.
gas/testsuite/gas/elf/symtab.d: New expected output.
gas/testsuite/gas/elf/elf.exp: Run the new symbtab test.
* config/tc-mips.h (mips_nop_opcode): Declare.
(NOP_OPCODE): Define.
(mips_segment_info): New structure.
(TC_SEGMENT_INFO_TYPE): Use it instead of insn_label_list.
* config/tc-mips.c (label_list): Adjust for new TC_SEGMENT_INFO_TYPE.
(mips_record_mips16_mode): New function.
(install_insn): Call it.
(mips_align): Likewise. Turn the fill argument into an "int *".
Use frag_align_code for code segments if no fill data is given.
(s_align): Adjust call accordingly.
(mips_nop_opcode): New function.
(mips_handle_align): Use the first variable byte to decide which
nop sequence is needed. Use md_number_to_chars and mips16_nop_insn.
gas/testsuite/
* gas/mips/align2.s, gas/mips/align2.d, gas/mips/align2-el.d: New
tests.
* gas/mips/mips.exp: Run them.
* config/tc-s390.c (md_begin): If the -mesa option is specified
add zarch opcodes to the hash table only if there is no variant
that is available for the esa mode as well.
2007-11-29 Martin Schwidefsky <schwidefsky@de.ibm.com>
* gas/s390/esa-z9-109.d: Add check for old version of sske.
* gas/s390/esa-z9-109.s: Likewise.
(dwarf2_emit_insn): Use it here.
(dwarf2_directive_loc): Fix check for consecutive .loc directives
when debug_type is DEBUG_DWARF2.
* dwarf2dbg.h (dwarf2_consume_line_info): New prototype.
* config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info.
(md_assemble): Likewise.
testsuite/
* gas/lns/lns.exp: Run lns-common-1 with alternate source for ia64.
* gas/lns/lns-common-1-ia64.s: New file.
* config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call frame optimization if linker relaxation is not enabled.
* gas/elf/elf.exp: Disable ehopt test for mn10300.
(display_debug_frames): Remove check in is_relocatable.
* dwarf.h (is_relocatable): Remove declaration.
* objdump.c (is_relocatable): New static definition.
* readelf.c (dump_relocations): Make the function void.
(is_32bit_abs_reloc): Add support for x86, Arc, Arm, D10V, Dlx, OR32 and Score.
(is_32bit_pcrel_reloc): Add support for x86 and Arm.
(is_16bit_abs_reloc): Add support for D10V.
(debug_apply_rela_addends): Rename to debug_apply_relocations.
Add code to support rel relocations.
(load_debug_section): Fix call to debug_apply_relocations.
(get_file_header): Remove setting of is_relocatable.
* gas/cfi/cfi-common-6.d: Allow for possible relocation of the .debug.eh_frame section.
* reloc.c (BFD_RELOC_MN10300_ALIGN): Add.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-m10300.h: Handle R_MN10300_ALIGN relocs.
* mn10300_elf_relax_delete_bytes): Honour R_MN10300_ALIGN relocs.
Re-fix off by one error in comparisons.
* config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
sym_diff relocs should be generated.
(md_apply_fix): Skip R_MN10300_ALIGN relocs.
(mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
(mn10300_handle_align): New function. Generate R_MN10300_ALIGN
relocs to record alignment requests.
* config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
R_MN10300_ALIGN relocs.
(HANDLE_ALIGN): Define. Call mn10300_handle_align.
* gas/all/gas.exp: Do not run diff1.s test for mn10300.
* ld-mn10300/mn10300.exp: Run new tests. Skip i126256 test if
a compiler is not available.
* ld-mn10300/i112045-3.s: New test.
* ld-mn10300/i112045-3.d: Expected disassembly.
* ld-mn10300/i135409.s: Rename to i135409-1.s.
* ld-mn10300/i135409.d: Rename to i135409-1.d
* ld-mn10300/i135409-2.s: New test.
* ld-mn10300/i135409-2.d: Expected symbol table.
* ld-mn10300/i36434.d: Adjust expected disassembly.
comma then the following argument must be a subsection number.
* testsuite/gas/elf/elf.exp (run_elf_list_test): Run section6 test.
* testsuite/gas/elf/section6.s: New file: Check behaviour of .pushsection with a subsection argument.
* testsuite/gas/elf/section6.d: New file: Expected disassembly.
* opcodes/mips-dis.c (mips_cp0_names_r3000): New definition.
(mips_cp0_names_r4000): Likewise.
(mips_arch_choices): Link to the above as appropriate.
gas/testsuite/:
* gas/mips/cp0-names-r3000.d: New test for R3000 CP0 symbolic
disassembly.
* gas/mips/cp0-names-r4000.d: New test for R4000/R4400 symbolic
CP0 disassembly.
* mips/mips.exp: Run the new tests.
* config/tc-mips.c (AT): Rename to...
(ATREG): ... this.
(AT): New definition.
(mips_set_options): Rename "noat" to "at"; change the type.
(mips_opts): Update accordingly.
(append_insn): Likewise.
(macro_build_ldst_constoffset): Likewise.
(load_address): Likewise.
(macro, macro2): Likewise.
(s_mipsset): Handle ".set at=REG". Update handling of ".set at"
and ".set noat".
gas/testsuite/:
* gas/mips/at-1.d, gas/mips/at-2.l: New tests to check the ".set
at=REG" directive.
* gas/mips/at-1.s, gas/mips/at-2.s: Sources for the new tests.
* gas/mips/mips.exp: Run the new tests.
2007-10-04 David Daney <ddaney@avtrex.com>
* mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S
registers.
gas/testsuite/
2007-10-04 David Daney <ddaney@avtrex.com>
* gas/mips/odd-float.d, gas/mips/odd-float.s: New test.
* gas/mips/mips.exp: Run it.
2007-09-27 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/5072
* gas/i386/i386.exp: Run x86-64-opcode-inval and
x86-64-opcode-inval-intel.
* gas/i386/x86-64-opcode-inval-intel.d: New.
* gas/i386/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval.s: Likewise.
opcodes/
2007-09-27 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/5072
* i386-dis.c: Update comments on '{', '}' and '|' to support
only AT&T and Intel modes.
(X86_64_4...X86_64_27): New.
(dis386): Updated. Use X86_64_4...X86_64_21.
(dis386_twobyte): Updated.
(float_mem): Likewise.
(x86_64_table): Add X86_64_4...X86_64_27.
(opc_ext_table): Updated. Use X86_64_22 and X86_64_27.
(putop): Updated handling of '{', '}' and '|' to support only
AT&T and Intel modes.
* config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
(last_movec_reg): Change to MBO.
* config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
(m68k_ip): Use MBO instead of MBO.
(init_table): Use MBO instead of MBO. Add an entry for mbo.
gas/testsuite/
* gas/m68k/fido.s: Add tests for %mbo.
* gas/m68k/fido.d: Update accordingly.
opcodes/
* m68k-dis.c (print_insn_arg): Use %mbo instead of %mbb.
2007-09-26 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-addr32.d: Adjust expectations.
opcodes/
2007-09-26 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_E_extended): Distinguish rip- and eip-
relative addressing. Update used_prefixes based on whether any
base or index register was printed.
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* config/tc-mips.c (s_align): Set max_alignment to 28.
gas/testsuite/
2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
* gas/mips/align.s, gas/mips/align.d: New test.
* gas/mips/mips.exp: Run it.
2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (intel_e04): Revert the last change.
gas/testsuite/
2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/x86-64-rip.s: Revert the last change.
* gas/i386/x86-64-rip-intel.d: Likewise.
* gas/i386/x86-64-rip.d: Likewise.
2007-09-12 Jan Beulich <jbeulich@novell.com>
* gas/i386/sse4_1.s, gas/i386/x86-64-sse4_1.s: Add two-operand forms
of blendvps, blendvpd, and pblendvb.
* gas/i386/sse4_1.d, gas/i386/sse4_1-intel.d,
gas/i386/x86-64-sse4_1.d, gas/i386/x86-64-sse4_1-intel.d: Adjust,
making last/first operand of blendvps, blendvpd, and pblendvb
optional.
opcodes/
2007-09-12 Jan Beulich <jbeulich@novell.com>
* i386-opc.tbl: Add two-operand forms of blendvps, blendvpd, and
pblendvb.
* i386-tbl.h: Regenerate.
* gas/i386/i386.exp: Run x86-64-reg and x86-64-reg-intel.
* gas/i386/x86-64-reg.s: New. Add tests for instructions
with one register operand.
* gas/i386/x86-64-reg-intel.d: Likewise.
* gas/i386/x86-64-reg.d: Likewise.
2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_suffix): Handle cmpxchg8b in
Intel mode.
gas/testsuite/
2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/mem.s: New. Add tests for instructions with one
memory operand.
* gas/i386/x86-64-mem.s: Likewise.
* gas/i386/mem-intel.d: Updated.
* gas/i386/mem.d: Likewise.
* gas/i386/x86-64-mem-intel.d: Likewise.
* gas/i386/x86-64-mem.d: Likewise.
opcodes/
2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (Md): New.
(grps): Use 0 on invlpg. Use M on fxsave and fxrstor. Use
Md on ldmxcsr and stmxcsr. Use b_mode on clflush.
(OP_0fae): Clear bytemode for sfence.
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* elf32-arm.c (elf32_arm_compare_mapping): Compare first on vma,
then on type.
binutils/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* binutils-all/ar.exp (long_filenames): Delete temporary files on
the host.
* binutils-all/arm/objdump.exp: Only check "which $OBJDUMP" if
host is local.
* binutils-all/objcopy.exp: Use ${srecfile} to get the name of the
srec file to be passed to binutils_run.
(objcopy_test_readelf): Use remote_exec.
* binutils-all/readelf.exp (readelf_find_size): Use remote_exec.
(readelf_test): Likewise.
(readelf_wi_test): Likewise.
* lib/utils-lib.exp (run_dump_test): Only check "which $binary" if
host is local. Use remote_exec. Use $tempfile not
tmpdir/bintest.o.
gas:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* as.c (main): Flush stderr before printing listings to ensure
consistent output order across platforms.
gas/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* lib/gas-defs.exp (gas_version): Use remote_* functions instead
of exec.
(gas_host_run): New.
(gas_run): Use gas_host_run.
(gas_start): Likewise.
(run_dump_test): Likewise.
(objdump): Use gas_host_run.
(objdump_start_no_subdir): Likewise.
* lib/gas-dg.exp (gas-dg-test): Use "remote_file host delete".
* lib/run: Remove.
* gas/macros/macros.exp: Download app4b.s to host.
* gas/i386/i386.exp (gas_64_check): Use gas_host_run.
(gas_32_check): Likewise.
* gas/maxq10/maxq10.exp (gas_64_check): Likewise
(gas_32_check): Likewise.
* gas/maxq20/maxq20.exp (gas_64_check): Likewise
(gas_32_check): Likewise.
* gas/sparc/sparc.exp (gas_64_check): Likewise.
* gas/cfi/cfi.exp: Likewise.
* gas/elf/elf.exp (run_list_test): Likewise. Use temporary file
for readelf output in place of pipe.
* gas/all/gas.exp: Download incbin.dat to host.
(do_comment): Allow \r\r\n.
ld:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ldlang.c (sort_sections_by_lma): Sort by internal id after lma
for stable sort.
ld/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ld-elfcomm/elfcomm.exp: Use run_host_cmd. Only check "which
$CC" if host is local.
* ld-checks/checks.exp: Use run_host_cmd.
* ld-elf/exclude.exp: Likewise.
* ld-elf/elf.exp: Download merge.ld if host is remote.
* ld-elf/binutils.exp (binutils_test): Use remote_exec.
* ld-elf/tls_common.exp: Use run_host_cmd.
* lib/ld-lib.exp (ld_version): Only check "which $ld" if host is
local. Use remote_exec.
(run_host_cmd): New.
(run_host_cmd_yesno): New.
(default_ld_relocate): Use run_host_cmd_yesno.
(default_ld_link): Likewise.
(default_ld_simple_link): Use run_host_cmd.
(default_ld_compile): Only check "which $ccprog" if host is local.
Use remote_file and remote_exec.
(default_ld_assemble): Only check "which $as" if host is local.
Use run_host_cmd.
(default_ld_nm): Use remote_exec, remote_upload and remote_file.
(run_dump_test): Use remote_exec, remote_upload and remote_file.
Only check "which $binary" if host is local.
(run_ld_link_tests): Use remote_exec, remote_upload and
remote_file.
* ld-selective/selective.exp: Only check "which $CXX" if host is
local. Use remote_exec.
* ld-scripts/phdrs.exp: Only check "which $objdump" if host is
local. Use run_host_cmd.
* ld-scripts/phdrs2.exp: Likewise.
* ld-scripts/weak.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-scripts/crossref.exp: Only check "which $CC" if host is local.
Use run_host_cmd.
* ld-scripts/map-address.exp: Upload map_address.map if host is
remote.
* ld-srec/srec.exp (run_srec_tests): Use run_host_cmd. Only check
"which $CC" and "which $CXX" if host is local.
* ld-undefined/undefined.exp: Only check "which $CC" if host is
local. Use remote_file and run_host_cmd.
* config/default.exp: Use remote_exec to create tmpdir.
* gas/elf/elf.exp (target_machine): Treat the arm-linux-gnu target in the same way as the arm-eabi target.
* gas/arm/mapshort-eabi.d: Use this file for the arm-linux-gnu target.
* gas/arm/mapshort-elf.d: Do not use this file for the arm-linux-gnu target.
Check the return value of insert_reg_alias and do not continue to create aliases once an insertion has failed.
(s_unreq): Delete the all-upper-case and all-lower-case alternatives as well.
* testsuite/gas/arm/arm.s: Add tests for re-aliasing a previously removed alias.
* testsuite/gas/arm/arm.l: Add new expected warning message.
2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-coff.h (x86_64_target_format): Renamed to ...
(i386_target_format): This
(TARGET_FORMAT): Use i386_target_format.
* config/tc-i386.c (x86_64_target_format): Removed.
(i386_target_format): Handle PE formats.
gas/testsuite/
2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run x86-64-nops-1 for x86_64-*-mingw*.
* config/tc-m68k.c (relaxable_symbol): Make sure that the correct addend is stored for relocs against weak symbols.
(md_apply_fix): So not loose track of addend for relocs against weak symbols.
* testsuite/gas/m68k/p3041.s: New test case.
* testsuite/gas/m68k/p3041.d: New expected disassembly.
* testsuite/gas/m68k/all.exp: Run new test for m68k-*-netbsd toolchains.
Only run arch-cpu-1 test for ELF based toolchains.
Tidy ups for m68k-netbsd gas toolchain:
* testsuite/gas/m68k/cpu32.d: Allow for extra text after expected disassembly.
* testsuite/gas/m68k/mcf-trap.d: Allow for alternative trap mnemonics.
* testsuite/gas/m68k/br-isab.d: Fix name of test.
* testsuite/gas/m68k/br-isac.d: Fix name of test.
2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (match_template): Check suffix for crc32 in
Intel mdoe.
(process_suffix): Default the suffix of 8bit crc32 to
BYTE_MNEM_SUFFIX.
(check_byte_reg): Skip check for 8bit crc32.
gas/testsuite/
2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/crc32-intel.d: New file.
* gas/i386/crc32.d:Likewise.
* gas/i386/crc32.s:Likewise.
* gas/i386/x86-64-crc32-intel.d:Likewise.
* gas/i386/x86-64-crc32.d:Likewise.
* gas/i386/x86-64-crc32.s:Likewise.
* gas/i386/i386.exp: Run crc32, crc32-intel, x86-64-crc32
and x86-64-crc32-intel.
opcodes/
2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (CRC32_Fixup): Properly handle Intel mode and
check data size prefix in 16bit mode.
* i386-opc.c (i386_optab): Default crc32 to non-8bit and
support Intel mode.
2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4429
* gas/i386/i386.exp: Run "x86-64-addr32-intel" and
"x86-64-rip-intel".
* gas/i386/intelok.d: Updated.
* gas/i386/x86-64-addr32-intel.d: New file.
* gas/i386/x86-64-rip-intel.d: Likewise.
opcodes/
2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4429
* i386-dis.c (print_insn): Also swap the order of op_riprel
when swapping op_index. Break when the RIP relative address
is printed.
(OP_E): Properly handle RIP relative addressing and print the
explicit zero displacement for Intel mode.
gas/testsuite/
* gas/arm/thumb1_unified.d: New test.
* gas/arm/thumb1_unified.s: New test.
gas/
* config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
Thumb-1. Add sanity check for bogus relaxations.
gas/
* config/tc-arm.c (encode_thumb2_ldmstm): New function.
(do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
(do_t_push_pop): Use encode_thumb2_ldmstm.
gas/testsuite/
* gas/arm/thumb2_ldmstm.d: New test.
* gas/arm/thumb2_ldmstm.s: New test.
PR gas/3918
* lib/gas-defs.exp (gas_started): New variable. Initialized to
0.
(gas_start): Set gas_started to 1.
(gas_finish): Skip if gas_started is 0. Reset gas_started to 0.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
2007-02-11 H.J. Lu <hongjiu.lu@intel.com>
PR gas/4027
* gas/i386/opcode.s: Add more tests for "test".
* i386/opcode-intel.d: Updated.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
include/opcode/
2007-02-11 H.J. Lu <hongjiu.lu@intel.com>
PR gas/4027
* i386.h (i386_optab): Put the real "test" before the pseudo
one.
* gas/elf/elf.exp: Expect the redef test to fail on targets which do not
convert fixups against ordinary symbols into relocs against section symbols.
* gas/all/gas.exp: Likewise.
gas/
* config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
gas/testsuite/
* gas/arm/thumb2_add.d: Add test for missing operand.
* gas/arm/thumb2_add.s: Ditto.
2006-12-13 H.J. Lu <hongjiu.lu@intel.com>
PR gas/3712
* config/tc-i386.c (match_template): Use MAX_OPERANDS for the
number of operands. Issue an error if MAX_OPERANDS != 4. Add
the 4th operand check.
gas/testsuite/
2006-12-13 H.J. Lu <hongjiu.lu@intel.com>
PR gas/3712
* gas/i386/inval.s: Add invalid insertq.
* gas/i386/x86-64-inval.s: Likewise.
* gas/i386/inval.l: Updated.
* gas/i386/x86-64-inval.l: Likewise.
2006-12-04 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (OP_J): Update used_prefixes in v_mode.
gas/testsuite/
2006-12-04 Jan Beulich <jbeulich@novell.com>
* gas/i386/opcode-intel.d: Fix wrong expectation. Make white space
expectations more consistent.
gas/
* config/tc-arm.c (arm_force_relocation): Return 1 for relocs against
function symbols.
gas/testsuite/
* gas/arm/thumbrel.s: New test.
* gas/arm/thumbrel.d: New test.
2006-11-30 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (SEG_Fixup): Delete.
(Sv): Use OP_SEG.
(putop): New suffix character 'D'.
(dis386): Use it.
(grps): Likewise.
(OP_SEG): Handle bytemode other than w_mode.
gas/testsuite/
2006-11-30 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.d: Adjust.
* gas/i386/naked.d: Adjust.
* gas/i386/opcode.d: Adjust.
2006-11-30 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (dis386): Use 'R' and 'O' for cbw/cwd unconditionally.
(putop): For 'O' suffix, print 'q' in Intel mode, and mark data prefix
used. For 'R' and 'W' suffix, simplify and fix Intel mode.
gas/testsuite/
2006-11-30 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.s: Use Intel syntax in Intel syntax test.
* gas/i386/x86-64-cbw.[sd]: New.
* gas/i386/x86-64-cbw-intel.d: New.
* gas/i386/i386.exp: Run new tests.
* elf32-xtensa.c (elf_xtensa_special_sections): Add .xtensa.info.
gas/
* config/tc-xtensa.c (XSHAL_ABI): Add default definition.
(directive_state): Disable scheduling by default.
(xtensa_add_config_info): New.
(xtensa_end): Call xtensa_add_config_info.
gas/testsuite/
* gas/elf/section2.e-xtensa: New file.
* gas/elf/elf.exp: Use it.
include/
* xtensa-config.h (XSHAL_ABI): New.
(XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New.
ld/
* emultempl/xtensaelf.em (XSHAL_ABI): Add default definition.
(replace_insn_sec_with_prop_sec): Use bfd_make_section_with_flags.
Delete redundant code to set sections flags and alignment.
(xt_config_info_unpack_and_check, check_xtensa_info): New.
(elf_xtensa_after_open): Iterate over input statements instead of
link_info.input_bfds.
(elf_xtensa_before_allocation): Likewise. Call check_xtensa_info for
each input, and write a new .xtensa.info section in the output.
* arm-dis.c (last_is_thumb): Delete.
(enum map_type, last_type): New.
(print_insn_data): New.
(get_sym_code_type): Take MAP_TYPE argument. Check the type of
the right symbol. Handle $d.
(print_insn): Check for mapping symbols even without a normal
symbol. Adjust searching. If $d is found see how much data
to print. Handle data.
gas/
* config/tc-arm.h (md_cons_align): Define.
(mapping_state): New prototype.
* config/tc-arm.c (mapping_state): Make global.
gas/testsuite/
* gas/arm/arm7t.d, gas/arm/neon-ldst-rm.d, gas/arm/thumb2_pool.d,
gas/arm/tls.d: Update for $d support.
* gas/arm/mapshort.d, gas/arm/mapshort.s: New test.
* gas/elf/section2.e-armeabi: Update.
* gas/elf/section2.e-armelf: New file.
* gas/elf/elf.exp: Use it.
ld/testsuite/
* ld-arm/mixed-app.d, ld-arm/tls-app.d, ld-arm/tls-lib.d: Update
for $d support.
* config/tc-m68k.c (m68k_ip): Correct output of cpu aliases.
gas/testsuite/
* gas/m68k/all.exp: Add mcf-trap.
* gas/m68k/mcf-trap.[sd]: New.
opcodes/
* m68k-opc.c (m68k_opcodes): Place trap instructions before set
conditionals. Add tpf coldfire instruction as alias for trapf.
2006-11-15 Jan Beulich <jbeulich@novell.com>
PR/3469
* symbols.c (symbol_clone): Mark symbol ending up not on symbol
chain by linking it to itself.
(resolve_symbol_value): Also check symbol_shadow_p().
(symbol_shadow_p): New.
* symbols.h (symbol_shadow_p): Declare.
gas/testsuite/
2006-11-15 Jan Beulich <jbeulich@novell.com>
* gas/elf/equ-reloc.[sd]: New.
* gas/elf/elf.exp: Run new test.
(arm_fix_adjustable) [OBJ_ELF]: Use it on coff targets too.
* gas/arm/local_label_coff.s: New test.
* gas/arm/local_label_coff.d: New test.
* gas/arm/local_label_elf.s: New test.
* gas/arm/local_label_elf.d: New test.
* gas/arm/local_label_wince.s: New test.
* gas/arm/local_label_wince.d: New test.
* pei-arm-wince.c (LOCAL_LABEL_PREFIX): Likewise.
* coff-arm.c (LOCAL_LABEL_PREFIX): Only define if not defined before.
* gas/arm/undefined.d: Run test on Windows CE.
* gas/arm/undefined_coff.d: Don't run test on Windows CE.
* config/tc-mips.c (pic_need_relax): Return true for section symbols.
gas/testsuite:
* gas/mips/elf-rel26.s: New test.
* gas/mips/elf-rel26.d: Ditto.
* gas/mips/mips.exp: Run it.
personality and lsda.
(struct cie_entry): Add per_encoding, lsda_encoding and personality.
(alloc_fde_entry): Initialize per_encoding and lsda_encoding.
(cfi_pseudo_table): Handle .cfi_personality and .cfi_lsda.
(dot_cfi_personality, dot_cfi_lsda, encoding_size): New functions.
(output_cie): Output personality including its encoding and LSDA encoding.
(output_fde): Output LSDA.
(select_cie_for_fde): Don't share CIE if personality, its encoding or
LSDA encoding are different. Copy the 3 fields from fde_entry to
cie_entry.
* doc/as.texinfo (.cfi_personality, .cfi_lsda): Document.
* gas/cfi/cfi-common-6.d: New test.
* gas/cfi/cfi-common-6.s: New.
* gas/cfi/cfi.exp: Add cfi-common-6 test.
* elf-bfd.h (local_call_stubs): New member.
* elfxx-mips.c (FN_STUB_P, CALL_STUB_P, CALL_FP_STUB_P): New macros.
(mips_elf_calculate_relocation): Handle local mips16 call stubs.
(mips16_stub_section_p): Rename from mips_elf_stub_section_p, use
the new stub macros.
(_bfd_mips_elf_check_relocs): Handle call stubs for code which
mixes mips16 and mips32 functions. Use mips16_stub_section_p. Mark
used stubs with SEC_KEEP. Use the new stub macros.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips16-intermix.d, gas/mips/mips16-intermix.s: New
testcase.
* gas/mips/mips.exp: Run new testcase.
[ ld/testsuite/ChangeLog ]
* ld-mips-elf/mips16-intermix-1.s, ld-mips-elf/mips16-intermix-2.s,
ld-mips-elf/mips16-intermix.d: New testcase.
* ld-mips-elf/mips-elf.exp (mips16_intermix_test): Run new testcases.
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* archures.c: Add definition for bfd_mach_arm_iWMMXt2.
* cpu-arm.c (processors): Add bfd_mach_arm_iWMMXt2.
(arch_info_struct, bfd_arm_update_notes): Likewise.
(architectures): Likewise.
(bfd_arm_merge_machines): Check for iWMMXt2.
* bfd-in2.h: Rebuild.
gas/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* config/tc-arm.c (arm_cext_iwmmxt2): New.
(enum operand_parse_code): New code OP_RIWR_I32z.
(parse_operands): Handle OP_RIWR_I32z.
(do_iwmmxt_wmerge): New function.
(do_iwmmxt_wldstd): Handle iwmmxt2 case where second operand is
a register.
(do_iwmmxt_wrwrwr_or_imm5): New function.
(insns): Mark instructions as RIWR_I32z as appropriate.
Also add torvsc<b,h,w>, wabs<b,h,w>, wabsdiff<b,h,w>,
waddbhus<l,m>, waddhc, waddwc, waddsubhx, wavg4{r}, wmaddu{x,n},
wmadds{x,n}, wmerge, wmiaxy{n}, wmiawxy{n}, wmul<sm,um>{r},
wmulw<um,sm,l>{r}, wqmiaxy{n}, wqmulm{r}, wqmulwm{r}, wsubaddhx.
(md_begin): Handle IWMMXT2.
(arm_cpus): Add iwmmxt2.
(arm_extensions): Likewise.
(arm_archs): Likewise.
gas/testsuite/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* gas/arm/iwmmxt2.s: New file.
* gas/arm/iwmmxt2.d: New file.
include/opcode/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm.h (ARM_CEXT_IWMMXT2, ARM_ARCH_IWMMXT2): Define.
opcodes/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
only be used with the default multiply-add operation, so if N is
set, don't bother printing X. Add new iwmmxt instructions.
(IWMMXT_INSN_COUNT): Update.
(iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
with a 'c' suffix.
(print_insn_coprocessor): Check for iWMMXt2. Handle format
specifiers 'r', 'i'.
gas/
* config/tc-arm.c (do_neon_dyadic_if_i): Remove.
(do_neon_dyadic_if_i_d): Avoid setting U bit.
(do_neon_mac_maybe_scalar): Ditto.
(do_neon_dyadic_narrow): Force operand type to NT_integer.
(insns): Remove out of date comments.
gas/testsuite/
* gas/arm/neon-cov.s: Test .u and .s aliases for .i suffixes.
* gas/arm/neon-cov.d: Adjust expected output.
opcodes/
* arm-dis.c (neon_opcode): Fix suffix on VMOVN.
* config/tc-arm.c (s_arm_unwind_save_mmxwr): Correct condition for
merging with previous long opcode.
gas/testsuite:
* gas/arm/unwind.s: Test not merging iWMMXt register save with
previous long opcode.
* gas/arm/unwind.d, gas/arm/unwind_vxworks.d: Update.
* config/tc-arm.c (parse_operands): Handle invalid register name
for OP_RIWR_RIWC.
gas/testsuite:
* gas/arm/iwmmxt-bad.s: Test invalid register names for wldrw and
wstrw.
* gas/arm/iwmmxt-bad.l: Update.
* config/tc-arm.c (enum operand_parse_code): Add OP_RIWC_RIWG.
(parse_operands): Handle it.
(insns): Use it for tmcr and tmrc.
gas/testsuite:
* gas/arm/iwmmxt.s: Test tmcr and tmrc with wcgr registers.
* gas/arm/iwmmxt.d: Update.
bfd/
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_ADD_IMM.
gas/
* tc-arm.c (do_t_add_sub): Use addw/subw when source is PC.
(md_convert_frag): Use correct reloc for add_pc. Use
BFD_RELOC_ARM_T32_ADD_IMM for normal add/sum.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_ADD_IMM.
(arm_force_relocation): Handle BFD_RELOC_ARM_T32_ADD_IMM.
gas/testsuite/
* gas/arm/thumb2_add.d: New test.
* gas/arm/thumb2_add.s: New test.
fixup_segment() to repeat a range check on a value that have already
been checked here.
* gas/sh/basic.exp: Run "too_large" dump test.
* gas/sh/too_large.s: New test file. Check that .byte directives do not
generate a bogus overflow message.
* gas/sh/too_large.s: New test control file.
* gas/mips/mips.exp: Move mips16e testcase to ELF only tests.
Run elf{el}-rel2 and elf-rel4 for all arches with gpr64. Run
e32-rel2 and e32-rel4 also for 64 bit configurations.
2006-06-23 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch_tune_set): New.
(cpu_arch_isa): Likewise.
(i386_align_code): Use xchg %ax,%ax for 2 byte nop. Optimize
nops with short or long nop sequences based on -march=/.arch
and -mtune=.
(set_cpu_arch): Set cpu_arch_isa. If cpu_arch_tune_set is 0,
set cpu_arch_tune and cpu_arch_tune_flags.
(md_parse_option): For -march=, set cpu_arch_isa and set
cpu_arch_tune and cpu_arch_tune_flags if cpu_arch_tune_set is
0. Set cpu_arch_tune_set to 1 for -mtune=.
(i386_target_format): Don't set cpu_arch_tune.
gas/testsuite/
2006-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops-1, nops-1-i386, nops-1-i686,
nops-1-merom, nops-2, nops-2-i386, nops-2-merom, x86-64-nops-1,
x86-64-nops-1-k8, x86-64-nops-1-nocona and x86-64-nops-1-merom.
* gas/i386/nops-1.s: New file.
* gas/i386/nops-2.s: Likewise.
* gas/i386/nops-1-i386.d: Likewise.
* gas/i386/nops-1-i686.d: Likewise.
* gas/i386/nops-1-merom.d: Likewise.
* gas/i386/nops-1.d: Likewise.
* gas/i386/nops-2-i386.d: Likewise.
* gas/i386/nops-2-merom.d: Likewise.
* gas/i386/nops-2.d: Likewise.
* gas/i386/x86-64-nops-1.s: Likewise.
* gas/i386/x86-64-nops-1-k8.d: Likewise.
* gas/i386/x86-64-nops-1-merom.d: Likewise.
* gas/i386/x86-64-nops-1-nocona.d: Likewise.
* gas/i386/x86-64-nops-1.d: Likewise.
* gas/i386/sse2.d: Updated to expect xchg %ax,%ax as 2 byte
nop.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops and x86-64-nops.
* gas/i386/nops.d: New file.
* gas/i386/nops.s: Likewise.
* gas/i386/x86-64-nops.d: Likewise.
* gas/i386/x86-64-nops.s: Likewise.
include/opcode/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Add "nop" with memory reference.
opcodes/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
(twobyte_has_modrm): Set 1 for 0x1f.
* config/tc-mips.c (mips_ip): Maintain argument count.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-sf32.s, gas/mips/mips32-sf32.d: New test for odd
single precision FPRs on MIPS32.
* gas/mips/mips.exp: Run them.
blocks.
* gas/arm/neon-cond-bad-inc.s: New test. Make sure unconditional
Neon instructions are rejected...
* gas/arm/neon-cond-bad.s: In ARM mode, and...
* gas/arm/neon-cond-bad_t2.s: Accepted in Thumb mode (with IT).
* gas/arm/neon-cond-bad.l: Expected error output in ARM mode.
* gas/arm/neon-cond-bad.d: Control ARM mode test.
* gas/arm/neon-cond-bad_t2.d: Expected output in Thumb mode.
* gas/arm/vfp-neon-syntax-inc.s: Test VFP Neon-style syntax.
* gas/arm/vfp-neon-syntax.s: ...in ARM mode.
* gas/arm/vfp-neon-syntax_t2.s: ...and Thumb mode.
* gas/arm/vfp-neon-syntax.d: Expected output in ARM mode.
* gas/arm/vfp-neon-syntax_t2.d: Expected output in Thumb mode.
* config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
appropriate.
(mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
(mips_ip): Make overflowed/underflowed constant arguments in DSP
and MT instructions a fatal error. Use INSERT_OPERAND where
appropriate. Improve warnings for break and wait code overflows.
Use symbolic constant of OP_MASK_COPZ.
(mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dsp.d, gas/mips/mips32-dsp.s, gas/mips/mips32-mt.d,
gas/mips/mips32-mt.s: Remove instructions with invalid arguments.
* gas/mips/mips32-dsp.l, gas/mips/mips32-mt.l: Delete file.
[ include/opcode/ChangeLog ]
* mips.h: Improve description of MT flags.
* m68k.h (mcf_mask): Define.
opcodes/
* m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
and fmovem entries. Put register list entries before immediate
mask entries. Use "l" rather than "L" in the fmovem entries.
* m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
out from INFO.
(m68k_scan_mask): New function, split out from...
(print_insn_m68k): ...here. If no architecture has been set,
first try printing an m680x0 instruction, then try a Coldfire one.
gas/testsuite/
* gas/m68k/mcf-fpu.s: Add fmovemd and fmovem instructions.
* gas/m68k/mcf-fpu.d: Adjust accordingly.
* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS): Rename.
(ISA_SUPPORTS_DSP_ASE, ISA_SUPPORTS_MT_ASE, ISA_HAS_64BIT_FPRS,
ISA_HAS_MXHC1): New macros.
(HAVE_32BIT_FPRS): Use ISA_HAS_64BIT_FPRS instead of
ISA_HAS_64BIT_REGS. Formatting fixes. Improved comments.
(mips_cpu_info): Change to use combined ASE/IS_ISA flag.
(MIPS_CPU_IS_ISA, MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP,
MIPS_CPU_ASE_MT, MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX): New defines.
(mips_after_parse_args): Change default handling of float register
size to account for 32bit code with 64bit FP. Better sanity checking
of ISA/ASE/ABI option combinations.
(s_mipsset): Support switching of GPR and FPR sizes via
.set {g,f}p={32,64,default}. Better sanity checking for .set ASE
options.
(mips_elf_final_processing): We should record the use of 64bit FP
registers in 32bit code but we don't, because ELF header flags are
a scarce ressource.
(mips_cpu_info_table): Add ASE flags for CPUs with mandatory ASE
extensions. Add 4ksc, 4kec, 4kem, 4kep, 4ksd, m4kp, 24kec, 24kef,
24kex, 34kc, 34kf, 34kx, 25kf CPU definitions.
(mips_cpu_info_from_isa): Use MIPS_CPU_IS_ISA.
* doc/c-mips.texi: Document .set {g,f}p={32,64,default}. Document
missing -march options. Document .set arch=CPU. Move .set smartmips
to ASE page. Use @code for .set FOO examples.
[ gas/testsuite/Changelog ]
* gas/mips/mips-gp32-fp64-pic.d, mips/mips-gp32-fp64.d,
gas/mips/mips-gp64-fp32-pic.d, gas/mips/mips-gp64-fp32.l,
gas/mips/mips-gp64-fp64.d: Adjust test cases to the changes assembler
output.
* gas/mips/mips-gp32-fp64.l, gas/mips/mips-gp64-fp32-pic.l: New files,
catch assembler warnings.
* config/tc-mips.c (macro_build): Test for currently active
mips16 option.
(mips16_ip): Reject invalid opcodes.
[ opcodes/ChangeLog ]
* mips16-opc.c (I1, I32, I64): New shortcut defines.
(mips16_opcodes): Change membership of instructions to their
lowest baseline ISA.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips.exp: Run new tests.
* gas/mips/mips16e.s, gas/mips/mips16e.d, gas/mips/mips16e-64.s,
gas/mips/mips16e-64.d, gas/mips/mips16e-64.l: New tests.
gas/
* config/tc-arm.c (arm_fix_adjustable): Return 0 for function symbols.
gas/testsuite/
* gas/arm/local_function.d: New test.
* gas/arm/local_function.s: New test.
* config/tc-mips.c (append_insn): Don't check the range of j or
jal addresses.
[ gas/testsuite/ChangeLog ]
* gas/mips/jal-range.l: Don't check the range of j or jal
addresses.
* config/tc-mips.c (append_insn): Only warn about an out-of-range
j or jal address.
[ gas/testsuite/ChangeLog ]
* gas/mips/jal-range.l: Only warn about an out-of-range j or jal
address.
here.
(md_apply_fix3): Multiply offset by 4 here for
BFD_RELOC_ARM_CP_OFF_IMM_S2 and BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
testsuite:
* gas/arm/iwmmxt.s: Increase offsets for wstrb and wstrh.
* gas/arm/iwmmxt.d: Update expected results.
* gas/arm/iwmmxt-bad2.s: Test wstrb, wstrh, wldrb and wldrh.
* gas/arm/iwmmxt-bad2.l: Update expected error messages.
