2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* config/tc-mips.c (mips16_macro): Don't use move_register.
(mips16_ip): Allow macros to use 'p'.
gas/testsuite/
* gas/mips/mips16-macro.s, gas/mips/mips16-macro.d: New test.
* gas/mips/mips.exp: Run it.
gas/
* config/tc-aarch64.c (enum aarch64_abi_type): New enumeration tag.
(AARCH64_ABI_LP64, AARCH64_ABI_ILP32): New enumerators.
(aarch64_abi): New variable.
(ilp32_p): Change to be a macro.
(aarch64_opts): Remove the support for option -milp32 and -mlp64.
(struct aarch64_option_abi_value_table): New struct.
(aarch64_abis): New table.
(aarch64_parse_abi): New function.
(aarch64_long_opts): Add entry for -mabi=.
* doc/as.texinfo (Target AArch64 options): Document -mabi.
* doc/c-aarch64.texi: Likewise.
gas/testsuite/
* gas/aarch64/ilp32-basic.d (#as): Update to use -mabi=ilp32
* config/tc-mips.c (mips_prefer_vec_regno, mips_parse_register):
New functions, split out from...
(reg_lookup): ...here. Remove itbl support.
(reglist_lookup): Delete.
(mips_operand_token_type): New enum.
(mips_operand_token): New structure.
(mips_operand_tokens): New variable.
(mips_add_token, mips_parse_base_start, mips_parse_argument_token)
(mips_parse_arguments): New functions.
(md_begin): Initialize mips_operand_tokens.
(mips_arg_info): Add a token field. Remove optional_reg field.
(match_char, match_expression): New functions.
(match_const_int): Use match_expression. Remove "s" argument
and return a boolean result. Remove O_register handling.
(match_regno, match_reg, match_reg_range): New functions.
(match_int_operand, match_mapped_int_operand, match_msb_operand)
(match_reg_operand, match_reg_pair_operand, match_perf_reg_operand)
(match_addiusp_operand, match_clo_clz_dest_operand)
(match_lwm_swm_list_operand, match_entry_exit_operand)
(match_save_restore_list_operand, match_mdmx_imm_reg_operand)
(match_tied_reg_operand): Remove "s" argument and return a boolean
result. Match tokens rather than text. Update calls to
match_const_int. Rely on match_regno to call check_regno.
(match_pcrel_operand, match_pc_operand): Replace "s" argument with
"arg" argument. Return a boolean result.
(parse_float_constant): Replace with...
(match_float_constant): ...this new function.
(match_operand): Remove "s" argument and return a boolean result.
Update calls to subfunctions.
(mips_ip, mips16_ip): Call mips_parse_arguments. Use match routines
rather than string-parsing routines. Update handling of optional
registers for token scheme.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: Add some more cases.
* gas/mips/micromips-ill.s, gas/mips/micromips-ill.l: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c: Enable functions commented out in previous patch.
(SKIP_SPACE_TABS): Move further up file.
(mips32_to_micromips_reg_b_map, mips32_to_micromips_reg_c_map)
(mips32_to_micromips_reg_d_map, mips32_to_micromips_reg_e_map)
(ips32_to_micromips_reg_f_map, mips32_to_micromips_reg_g_map)
(mips32_to_micromips_reg_l_map, mips32_to_micromips_reg_m_map)
(mips32_to_micromips_reg_q_map, mips32_to_micromips_reg_n_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(mips_lookup_reg_pair): Delete.
(macro): Use report_bad_range and report_bad_field.
(mips_immed, expr_const_in_range): Delete.
(mips_ip): Rewrite main parsing loop to use new functions.
gas/testsuite/
* gas/mips/at-2.l: Remove duplicated $at warnings.
* gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips32r2-ill.l,
gas/mips/mips32r2-ill-nofp.l, gas/mips/mips32r2-ill-fp64.l,
gas/mips/mips64r2-ill.l, gas/mips/octeon-ill.l: Update error
messages. Expect negative numbers to be printed as such,
rather than as large unsigned positive numbers.
* mips.h (EF_MIPS_NAN2008): New macro.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Handle
EF_MIPS_NAN2008.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
binutils/
* readelf.c (get_machine_flags): Handle EF_MIPS_NAN2008.
gas/
* config/tc-mips.c (mips_flag_nan2008): New variable.
(options): Add OPTION_NAN enum value.
(md_longopts): Handle it.
(md_parse_option): Likewise.
(s_nan): New function.
(mips_elf_final_processing): Handle EF_MIPS_NAN2008.
(md_show_usage): Add -mnan.
* doc/as.texinfo (Overview): Add -mnan.
* doc/c-mips.texi (MIPS Opts): Document -mnan.
(MIPS NaN Encodings): New node. Document .nan directive.
(MIPS-Dependent): List the new node.
gas/testsuite/
* gas/mips/nan-2008-1.d: New test.
* gas/mips/nan-2008-2.d: New test.
* gas/mips/nan-2008-3.d: New test.
* gas/mips/nan-2008-4.d: New test.
* gas/mips/nan-legacy-1.d: New test.
* gas/mips/nan-legacy-2.d: New test.
* gas/mips/nan-legacy-3.d: New test.
* gas/mips/nan-legacy-4.d: New test.
* gas/mips/nan-legacy-5.d: New test.
* gas/mips/nan-error-1.l: New list test.
* gas/mips/nan-error-2.l: New list test.
* gas/mips/nan-2008-override.s: New test source.
* gas/mips/nan-2008.s: New test source.
* gas/mips/nan-legacy-override.s: New test source.
* gas/mips/nan-legacy.s: New test source.
* gas/mips/nan-error-1.s: New test source.
* gas/mips/nan-error-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/nan-2008.d: New test.
* ld-mips-elf/nan-legacy.d: New test.
* ld-mips-elf/nan-mixed-1.d: New test.
* ld-mips-elf/nan-mixed-2.d: New test.
* ld-mips-elf/nan-2008.s: New test source.
* ld-mips-elf/nan-legacy.s: New test source.
* config/tc-mips.c (mips_ip): Unconditionally parse an expression
for 'A' and assume that the constant has been elided if the result
is an O_register.
gas/testsuite/
* gas/mips/la.s, gas/mips/la.d, gas/mips/la-svr4pic.d,
gas/mips/la-xgot.d: Add tests for bracketed addresses.
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB)
(M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB)
(M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A)
(M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB)
(M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB)
(M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB)
(M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB)
(M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB)
(M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A)
(M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A)
(M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB)
(M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete.
(M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A):
Rename to...
(M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB)
(M_USD_AB): ...these.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
and SD A(B) macros up.
* micromips-opc.c (micromips_opcodes): Likewise.
gas/
* config/tc-mips.c (gprel16_reloc_p): New function.
(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
BFD_RELOC_UNUSED.
(offset_high_part, small_offset_p): New functions.
(nacro): Use them. Remove *_OB and *_DOB cases. For single-
register load and store macros, handle the 16-bit offset case first.
If a 16-bit offset is not suitable for the instruction we're
generating, load it into the temporary register using
ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
M_L_DAB code once the address has been constructed. For double load
and store macros, again handle the 16-bit offset case first.
If the second register cannot be accessed from the same high
part as the first, load it into AT using ADDRESS_ADDI_INSN.
Fix the handling of LD in cases where the first register is the
same as the base. Also handle the case where the offset is
not 16 bits and the second register cannot be accessed from the
same high part as the first. For unaligned loads and stores,
fuse the offbits == 12 and old "ab" handling. Apply this handling
whenever the second offset needs a different high part from the first.
Construct the offset using ADDRESS_ADDI_INSN where possible,
for offbits == 16 as well as offbits == 12. Use offset_reloc
when constructing the individual loads and stores.
(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
and offset_reloc before matching against a particular opcode.
Handle elided 'A' constants. Allow 'A' constants to use
relocation operators.
gas/testsuite/
* gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for
truncated constants.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding
16-bit constants to the base.
* gas/mips/micromips@mcu.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips.d, gas/mips/micromips-insn32.d,
gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise.
Allow the full 16-bit offset range to be used for SB, LB and LBU in
USH and ULH sequences. Fix the expected output for LD and SD when
the two LW and SW offsets need different high parts.
* gas/mips/eva.s: Test PREFE with relocation operators.
* gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit
constants. Update after eva.s change.
* gas/mips/micromips@eva.d: Likewise.
* gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s,
gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d,
gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s,
gas/mips/ulh-reloc.d: New tests.
* gas/mips/mips.exp: Run them.
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
opcodes/
* s390-opc.c (J12_12, J24_24): New macros.
(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
(MASK_MII_UPI): Rename to MASK_MII_UPP.
* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
include/elf/
* s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL,
R_390_PC24DBL, and R_390_PLT24DBL.
gas/testsuite/
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
variants requiring relocations.
* gas/s390/zarch-zEC12.d: Likewise.
gas/
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
relocs.
bfd/
* elf32-s390.c: Add new relocation definitions R_390_PC12DBL,
R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL.
(elf_s390_reloc_type_lookup, elf_s390_check_relocs)
(elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new
relocations.
* elf64-s390.c: See elf32-s390.c
* bfd-in2.h: Add new relocs to enum bfd_reloc_code_real.
* libbfd.h: Add new reloc strings.
* config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
so it skips whitespace before it.
(s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
gas/testsuite/
* gas/arm/macro-vld1.s: Add a case with whitespace before '}'.
* gas/arm/macro-vld1.d: Update.
* gas/mips/mips.exp: Remove "LOSE" comments.
(run_dump_test_arch): Remove format selector support.
(run_dump_test_arches): Remove associated upvars.
(elf, ecoff, aout, no_mips16, no_micromips): Remove variables.
Remove all conditions based on them, on the assumption that $elf
is true and the others are false. Rename "elf-jal" to "jal".
(tmips): Set to "t" for *bsd targets.
* gas/mips/elf-jal.d: Rename to...
* gas/mips/jal.d: ...this, replacing the old file.
* gas/mips/micromips@elf-jal.d: Rename to...
* gas/mips/micromips@jal.d: ...this.
* gas/mips/at-1.d, gas/mips/ld.d, gas/mips/l_d.d, gas/mips/lui.d,
gas/mips/mips1@l_d.d, gas/mips/mips1@ld-forward.d, gas/mips/mips1@ld.d,
gas/mips/mips1@s_d.d, gas/mips/s_d.d, gas/mips/sd.d: Remove ECOFF
relocation names. Do not allow any offset on the symbol.
* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
(ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
(ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
(ISA_SUPPORTS_VIRT64_ASE): Delete.
(mips_ase): New structure.
(mips_ases): New table.
(FP64_ASES): New macro.
(mips_ase_groups): New array.
(mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
(mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
functions.
(is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
(md_parse_option): Use mips_ases and mips_set_ase instead of
separate case statements for each ASE option.
(mips_after_parse_args): Use FP64_ASES. Use
mips_check_isa_supports_ases to check the ASEs against
other options.
(s_mipsset): Use mips_ases and mips_set_ase instead of
separate if statements for each ASE option. Use
mips_check_isa_supports_ases, even when a non-ASE option
is specified.
gas/testsuite/
* gas/mips/ase-errors-1.s, gas/mips/ase-errors-1.l,
gas/mips/ase-errors-2.s, gas/mips/ase-errors-2.l,
gas/mips/ase-errors-3.s, gas/mips/ase-errors-3.l,
gas/mips/ase-errors-4.s, gas/mips/ase-errors-4.l: New tests.
* gas/mips/mips.exp: Run them.
gas/
* config/tc-nios2.c (md_apply_fix): Mask constant
BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
gas/testsuite/
* gas/nios2/movia.s: Add additional test case with negative
constant value.
* gas/nios2/movia.d: Likewise.
* config/tc-mips.c (append_insn): Don't do branch relaxation for
MIPS-3D instructions either.
(md_convert_frag): Update the COPx branch mask accordingly.
* config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
option.
* doc/as.texinfo (Overview): Add --relax-branch and
--no-relax-branch.
* doc/c-mips.texi (MIPS Opts): Document --relax-branch and
--no-relax-branch.
gas/testsuite/
* gas/mips/relax-bc1any.l: New test.
* gas/mips/relax-bc1any.s: New test source.
* gas/mips/mips.exp: Run the new test.
* write.c (resolve_reloc_expr_symbols): On REL targets don't
convert relocs who have no relocatable field either. Rephrase
the conditional so that the PC-relative check is only applied
for REL targets.
gas/testsuite/
* gas/mips/jalr3.d: New test.
* gas/mips/jalr3-n32.d: New test.
* gas/mips/jalr3-n64.d: New test.
* gas/mips/jalr3.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/jalr3.dd: New test.
* ld-mips-elf/jalr3.ld: New test linker script.
* ld-mips-elf/mips-elf.exp: Run the new test.
* config/tc-mips.c (macro) <ld>: Don't use $zero for address
calculation.
gas/testsuite/
* gas/mips/ld-zero.d: New test.
* gas/mips/ld-zero-2.d: New test.
* gas/mips/ld-zero-3.d: New test.
* gas/mips/ld-zero-q.d: New test.
* gas/mips/ld-zero-u.d: New test.
* gas/mips/ecoff@ld-zero-3.d: New test.
* gas/mips/micromips@ld-zero-2.d: New test.
* gas/mips/micromips@ld-zero-3.d: New test.
* gas/mips/ld-zero.s: New test source.
* gas/mips/ld-zero-2.s: New test source.
* gas/mips/ld-zero-3.s: New test source.
* gas/mips/ld-zero-q.s: New test source.
* gas/mips/ld-zero-u.s: New test source.
* gas/mips/mips.exp: Run the new tests.
2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (md_apply_fix): Move value range checking
inside fx_done condition.
2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
* gas/aarch64/adr_1.d: New file.
* gas/aarch64/adr_1.s: New file.
* gas/aarch64/b_1.d: New file.
* gas/aarch64/b_1.s: New file.
* gas/aarch64/beq_1.d: New file.
* gas/aarch64/beq_1.s: New file.
* gas/aarch64/ldr_1.d: New file.
* gas/aarch64/ldr_1.s: New file.
* gas/aarch64/tbz_1.d: New file.
* gas/aarch64/tbz_1.s: New file.
* s390-opc.txt (flogr): Require a register pair destination.
gas/testsuite/
* gas/s390/zarch-z9-109-err.s, gas/s390/zarch-z9-109-err.l: New test.
* gas/s390/s390.exp: Run it.
Add -mcpu command to specify core type.
* doc/c-msp430.c: Update documentation.
* gas/msp430/opcodes.s: Use correct value for .arch pseudo.
* gas/msp430/msp430x.d: Use correct value for -mcpu option.
* doc/binutils.texi: Document -Mvirt disassembler option.
gas/ChangeLog:
* config/tc-mips.c (struct mips_set_options): New ase_virt field.
(mips_opts): Update for the new field.
(file_ase_virt): New variable.
(ISA_SUPPORTS_VIRT_ASE): New macro.
(ISA_SUPPORTS_VIRT64_ASE): New macro.
(MIPS_CPU_ASE_VIRT): New define.
(is_opcode_valid): Handle ase_virt.
(macro_build): Handle "+J".
(validate_mips_insn): Likewise.
(mips_ip): Likewise.
(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
(md_longopts): Add mvirt and mnovirt
(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
(mips_after_parse_args): Handle ase_virt field.
(s_mipsset): Handle "virt" and "novirt".
(mips_elf_final_processing): Add a comment about virt ASE might need a new flag.
(md_show_usage): Print out the usage of -mvirt and mno-virt options.
* doc/c-mips.texi: Document -mvirt and -mno-virt.
Document ".set virt" and ".set novirt".
gas/testsuite/ChangeLog:
* gas/mips/mips.exp: Run virt and virt64 testcases.
* gas/mips/virt.d: New file.
* gas/mips/virt.s: New file.
* gas/mips/virt64.d: New file.
* gas/mips/virt64.s: New file.
include/opcode/ChangeLog:
* mips.h (OP_MASK_CODE10): Correct definition.
(OP_SH_CODE10): Likewise.
Add a comment that "+J" is used now for OP_*CODE10.
(INSN_ASE_MASK): Update.
(INSN_VIRT): New macro.
(INSN_VIRT64): New macro
opcodes/ChangeLog:
* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 .
Add INSN_VIRT and INSN_VIRT64 to mips64r2.
(parse_mips_dis_option): Handle the virt option.
(print_insn_args): Handle "+J".
(print_mips_disassembler_options): Print out message about virt64.
* mips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
Move rfe to the bottom as it conflicts with tlbgp.
* config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
(s_mips_stab): Do not restrict to stabn only.
gas/testsuite/
* gas/mips/mips16-stabs.s, gas/mips/mips16-stabs.d: New test.
* gas/mips/mips.exp: Run it.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.
bfd/
* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
x86_64-*-elf*.
gas/testsuite/
* gas/i386/rex.d: Skip x86_64-*-elf*.
* gas/i386/ilp32/rex.d: Likewise.
ld/
* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
x86_64-*-elf*.
(targ_extra_libpath): Likewise.
(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
register being PC when is_t or writeback, and use distinct
diagnostic for the latter case.
gas/testsuite/
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/testsuite/gas/arm/ldst-pc.s: Add index, non-writeback
forms of various loads and stores with PC as base.
* gas/testsuite/gas/arm/ldst-pc.d: Update accordingly.
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (parse_operands): Re-write
po_barrier_or_imm().
(do_barrier): Remove bogus constraint().
(do_t_barrier): Remove.
gas/testsuite/
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/arm/barrier-bad.d: Change title.
* gas/arm/barrier-bad.s: Add immediate form of ISB and DSB as
well as one symbolic form of DSB.
* gas/arm/barrier-bad.l: Update accordingly.
* gas/arm/barrier-bad-thumb.d: Adjust title. Use barrier-bad.s as
source. Pass -mthumb to gas.
* gas/arm/barrier-bad-thumb.l: Remove.
* gas/arm/barrier-bad-thumb.s: Remove.
* gas/arm/barrier-thumb.d: Adjust title. Use barrier.s as source.
Pass -mthumb to gas.
* gas/arm/barrier-thumb.s: Remove.
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_vmrs): Accept all control registers.
Use local variable Rt in more places.
(do_vmsr): Accept all control registers.
gas/testsuite/
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/arm/vfp1xD.s: Add VMRS/VMSR tests with FPINST, FPINST2,
and C15.
* gas/arm/vfp1xD.d: Update accordingly.
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
if there was none specified for moves between scalar and core
register.
gas/testsuite/
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/arm/neon-omit.s: Add tests for suffix less VMOV.
* gas/arm/neon-omit.d: Update accordingly.
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
NEON_ALL_LANES case.
gas/testsuite/
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/arm/neon-addressing-bad.s: Add test for further invalid VST
operands.
* gas/arm/neon-addressing-bad.l: Update accordingly.
Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
* tic6x-opcode-table.h: Fix patterns for add, ldnw and xor.
* gas/tic6x/insns16-lsd-unit.s: Correct bit patterns for mvk, add
and xor.
* gas/tic6x/insns16-lsd-unit.d: Update expected output.
2013-03-26 Douglas B Rupp <rupp@gnat.com>
* config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
after fixup.
gas/testsuite/
2013-03-26 Douglas B Rupp <rupp@adacore.com
* gas/ia64/ia64.exp: Add new test reloc-mlx
* gas/ia64/reloc-mlx.[sd]: New test for X-unit reloc.
* gas/ia64/pcrel.d: Fix output for X-unit reloc.
2013-03-21 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
pc-relative str instructions in Thumb mode.
gas/testsuite/ChangeLog:
2013-03-21 Will Newton <will.newton@linaro.org>
* gas/arm/thumb2_relax.d: Strip out invalid pc-relative strs.
* gas/arm/thumb2_relax.s: Likewise.
* gas/arm/thumb32.d: Likewise.
* gas/arm/thumb32.l: Likewise.
* gas/arm/thumb32.s: Likewise.
* gas/arm/thumb2_str-bad.d: New file.
* gas/arm/thumb2_str-bad.l: Likewise.
* gas/arm/thumb2_str-bad.s: Likewise.
* tic6x-opcode-table.h: Rename mpydp's specific operand type macro
from ORREGD1324 to ORXREGD1324 and make it cross-path-able through
tic6x_operand_xregpair operand coding type.
Make mpydp instruction cross-path-able, ie: remove the FIXed 'x'
opcode field, usu ORXREGD1324 for the src2 operand and remove the
TIC6X_FLAG_NO_CROSS.
* gas/tic6x/insns-bad-1.s: Remove test-case for mpydp with
cross-path.
* gas/tic6x/insns-bad-1.l: Update expected output.
* gas/tic6x/insns-c674x.s: Add a test-case for mpydp with
cross-path.
* gas/tic6x/insns-c674x.d: Update expected output.
order to encode separately the msb and lsb of a register pair ; this will be
needed to encode the opcodes the same
way as Ti assembler does.
* gas/config/tc-tic6x.c: handle tic6x_coding_dreg_(msb|lsb) field coding types
and use it to encode register pair numbers when required.
* opcodes/tic6x-dis.c: decodes opcodes that have individual msb and lsb halves
in src1 & src2 fields ; discard the src1 (lsb) value and only use src2 (msb),
discarding bit 0, to follow what Ti SDK does in that case as any value in the
src1 field yields the same output with SDK disassembler.
* include/opcode/tic6x-opcode-table.h: modify absdp, dpint, dpsp, dptrunc,
rcpdp and rsqrdp opcodes to use the new field coding types.
* gas/testsuite/gas/tic6x/insns-c674x.d, gas/testsuite/gas/tic6x/insns-c674x.s
: add test case for the newly generated opcode but keep the old ones as they
seem legit as per Ti disassembler output.
2013-03-12 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
in vstr in Thumb mode for pre-ARMv7 cores.
gas/testsuite/ChangeLog:
2013-03-12 Will Newton <will.newton@linaro.org>
* gas/arm/vstr-thumb-bad.d: Assemble with -mcpu=arm1156t2f-s.
opcodes/
* nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.
gas/testsuite/
* gas/nios2/nios2.exp: Run registers.
* gas/nios2/registers.d: New file.
* gas/nios2/registers.s: Likewise.
* config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
for system registers.
gas/testsuite/
* gas/aarch64/illegal.l: Delete the error message for
msr S3_1_C13_C15_1,x7.
* gas/aarch64/sysreg.s: Add new tests.
* gas/aarch64/sysreg.d: Update.
which also makes the disassembler output be in little
endian like it should be.
* metag/labelarithmetic.d: Fix the expected disassembler
output to be in little endian format
* metag/metacore12.d: likewise
* metag/metacore21.d: likewise
* metag/metacore21ext.d: likewise
* metag/metadsp21.d: likewise
* metag/metadsp21ext.d: likewise
* metag/metafpu.d: likewise
* metag/metafpuext.d: likewise
* metag/tls.d: likewise
* ld-metag/pcrel.d: Fix the expected disassembler
output to be in little endian format
* ld-metag/shared.d: likewise
* ld-metag/stub.d: likewise
* ld-metag/stub_pic_app.d: likewise
* ld-metag/stub_pic_shared.d: likewise
* ld-metag/stub_shared.d: likewise
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
(macro): Use it. Assert that trunc.w.s is not used for r5900.
opcodes/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
single-float. Disable ll, lld, sc and scd for EE. Disable the
trunc.w.s macro for EE.
gas/testsuite/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/24k-triple-stores-2.d, gas/mips/24k-triple-stores-2.s,
gas/mips/micromips@24k-triple-stores-2.d: Move "sc" tests to...
* gas/mips/24k-triple-stores-2-llsc.d,
gas/mips/24k-triple-stores-2-llsc.s,
gas/mips/micromips@24k-triple-stores-2-llsc.d: ...these new tests.
* gas/mips/r5900-full.d, gas/mips/r5900-full.s: Verify that the
MIPS ISA level can be upgraded to support ll, sc, lld and scd.
* gas/mips/l_d-single.d, gas/mips/s_d-single.d,
gas/mips/r5900-nollsc.l, gas/mips/r5900-nollsc.s: New tests.
* gas/mips/mips.exp: Update accordingly. Add "nollsc" to r5900
properties.
* tic6x-opcode-table.h: Fix encoding of BNOP instruction.
* gas/tic6x/insns-c674x-pcrel.s: Add test of BNOP instruction
within header based fetch packet.
* gas/tic6x/insns-c674x-pcrel.d: Update expected disassembly.
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64.h (aarch64_op): Remove OP_V_MOVI_B.
opcodes/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): For
AARCH64_MOD_LSL, move the range check on the shift amount before the
alignment check; change to call set_sft_amount_out_of_range_error
instead of set_imm_out_of_range_error.
* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
SIMD_IMM_SFT.
gas/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (output_operand_error_record): Change to output
the out-of-range error message as value-expected message if there is
only one single value in the expected range.
(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
LSL #0 as a programmer-friendly feature.
gas/testsuite/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/movi.s: Add tests.
* gas/aarch64/movi.d: Update.
* gas/aarch64/programmer-friendly.s: Add comment.
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (parse_operands): Change to compare the result
of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
gas/testsuite/
2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.s: Add test.
* gas/aarch64/diagnostic.l: Update.
* config/tc-arm.c (skip_past_char): Skip whitespace before the
anticipated character.
* config/tc-arm.c (parse_address_main): Delete skip of whitespace
here as it is no longer needed.
PR gas/14887
* gas/arm/neon-ldst-es.s: Add more whitespace.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
2012-12-06 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (exp_has_bignum_p): Remove.
(my_get_expression): Not get rid of bignums.
(s_ltorg): Increase the range of 'align'.
(programmer_friendly_fixup): Allow bignum expression.
gas/testsuite/
2012-12-06 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/illegal.s: Add test for unaccepted LDR literal.
* gas/aarch64/illegal.l: Update.
* gas/aarch64/programmer-friendly.s: Add tests for LDR literal with
the auto-generation of literal in pool.
* gas/aarch64/programmer-friendly.d: Update.
* config/tc-arm.c (md_apply_fix): Fix conversion of BL to BLX for
local targets in Thumb mode.
gas/testsuite/
* gas/arm/bl-local-2.s: New test.
* gas/arm/bl-local-2.d: New.
* lib/binutils-common.exp (is_zlib_supported): New function.
* lib/utils-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* binutils-all/compress.exp: Bail out if zlib is not available.
* binutils-all/objdump.exp (objdump compressed debug):
Mark unsupported if zlib is not available.
* binutils-all/readelf.exp (readelf_compressed_wa_test): Likewise.
gas/testsuite/
* lib/gas-defs.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
ld/testsuite/
* ld-elf/compress.exp: Bail out if zlib is not supported.
* lib/ld-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* config/tc-arm.c (arm_symbol_chars): New variable.
* config/tc-arm.h (tc_symbol_chars): New macro, defined to that.
gas/testsuite/
* gas/arm/macro-pld.s: New file.
* gas/arm/macro-pld.d: New file.
* config/tc-ppc.c (md_apply_fix): Leave field zero when emitting
an ELF reloc on data as well.
gas/testsuite/ChangeLog:
* gas/ppc/astest.d: Update for fixup changes.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* config/tc-mips.c (mips_ip) <'u'>: Default to BFD_RELOC_LO16.
gas/testsuite/
* gas/mips/lui.d: New test.
* gas/mips/micromips@lui.d: New test.
* gas/mips/lui-1.l: New list test.
* gas/mips/lui-2.l: New list test.
* gas/mips/lui.s: New test source.
* gas/mips/lui-1.s: New test source.
* gas/mips/lui-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
* config/tc-mips.c (append_insn): Set fx_no_overflow for 16-bit
microMIPS branch relocations.
gas/testsuite/
* gas/mips/micromips-b16.d: New test.
* gas/mips/micromips-b16.s: New test source.
* gas/mips/mips.exp: Run the new test.
* config/tc-mips.c (is_delay_slot_valid): Don't accept macros
in 16-bit delay slots.
(macro_build_jalr): Emit 32-bit JALR if placed in a 32-bit delay
slot.
(macro) <M_JAL_2>: Likewise
gas/testsuite/
* gas/mips/micromips-branch-delay.l: Update messages for 16-bit
delay slot changes.
* gas/mips/micromips-warn-branch-delay.d: New test.
* gas/mips/micromips-warn-branch-delay.l: Stderr output for the
new test.
* gas/mips/micromips-warn-branch-delay-1.d: New test.
* gas/mips/micromips-warn-branch-delay.s: New test source.
* gas/mips/micromips-warn-branch-delay-1.s: New test source.
* gas/mips/mips.exp: Run the new tests.
* gas/i386/rex.s: Add test of REX prefix before fsave (i.e. fwait).
* gas/i386/rex.d: Update.
opcodes/
* i386-dis.c (ckprefix): When bailing out for fwait with prefixes,
set rex_used to rex.
opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Change to check
the alignment of addr.offset.imm instead of that of shifter.amount for
operand type AARCH64_OPND_ADDR_UIMM12.
gas/testsuite/
* gas/aarch64/illegal-2.s: Add test case.
* gas/aarch64/illegal-2.l: Likewise.
* arm-dis.c: Use preferred form of vrint instruction variants
for disassembly.
2012-10-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* gas/arm/armv8-a+fp.d: Use preferred form of vrint instruction
variants for disassembly.
* gas/arm/armv8-a+fp.s: Likewise.
* gas/arm/armv8-a+simd.d: Likewise.
* gas/arm/armv8-a+simd.s: Likewise.
register operand of clr1, not1, set1 and tst1 instructions.
* config/tc-v850.c (v850_insert_operand): Use a static buffer for
the error message.
* gas/v850/v850e1.d: Fix expected disassembly of clr1, not1, set1
and tst1 insns.
* config/tc-s390.c (s390_parse_cpu): Add new option zEC12.
* doc/as.texinfo: Document new option zEC12.
* doc/c-s390.texi: Likewise.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/s390.exp: Run zEC12 tests.
* gas/s390/zarch-zEC12.d: New file.
* gas/s390/zarch-zEC12.s: New file.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-mkopc.c: Support new option zEC12.
* s390-opc.c: Add new instruction formats.
* s390-opc.txt: Add new instructions for zEC12.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_ZEC12.
2012-09-23 Maciej W. Rozycki <macro@codesourcery.com>
* gas/mips/hilo-diff-eb.d: New test.
* gas/mips/hilo-diff-eb-n32.d: New test.
* gas/mips/hilo-diff-eb-n64.d: New test.
* gas/mips/hilo-diff-el.d: New test.
* gas/mips/hilo-diff-el-n32.d: New test.
* gas/mips/hilo-diff-el-n64.d: New test.
* gas/mips/mips16@hilo-diff-eb.d: New test.
* gas/mips/mips16@hilo-diff-eb-n32.d: New test.
* gas/mips/mips16@hilo-diff-eb-n64.d: New test.
* gas/mips/mips16@hilo-diff-el.d: New test.
* gas/mips/mips16@hilo-diff-el-n32.d: New test.
* gas/mips/mips16@hilo-diff-el-n64.d: New test.
* gas/mips/micromips@hilo-diff-eb.d: New test.
* gas/mips/micromips@hilo-diff-eb-n32.d: New test.
* gas/mips/micromips@hilo-diff-eb-n64.d: New test.
* gas/mips/micromips@hilo-diff-el.d: New test.
* gas/mips/micromips@hilo-diff-el-n32.d: New test.
* gas/mips/micromips@hilo-diff-el-n64.d: New test.
* gas/mips/hilo-diff.s: New test source.
* gas/mips/mips.exp: Run the new tests.
* config/tc-mips.h (TC_FORCE_RELOCATION): Remove comment.
* config/tc-mips.c (calculate_reloc): New function.
(append_insn): Use it. Do not resolve compound relocations here.
(mips16_macro_build, mips16_ip): Use calculate_reloc.
(mips16_immed_extend): New function, split out from...
(mips16_immed): ...here.
(mips_frob_file): Handle null symbols.
(mips_force_relocation): Remove NEWABI handling.
(read_reloc_insn, write_reloc_insn): New functions.
(md_apply_fix): Report TLS relocations against constants.
Use read_reloc_insn, calculate_reloc and write_reloc_insn.
Report relocations against constants that can't be resolved
at assembly time.
gas/testsuite/
* gas/mips/elf-rel22.s, gas/mips/elf-rel22.d: Add more tests.
* gas/mips/elf-rel29.s, gas/mips/elf-rel29.d,
gas/mips/micromips@elf-rel29.d, gas/mips/elf-rel30.s,
gas/mips/elf-rel30.l: New tests.
* gas/mips/mips.exp: Run them.
2012-09-23 Richard Sandiford <rdsandiford@googlemail.com>
Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.h (mips_record_label): Delete.
(mips_add_dot_label): Declare.
(tc_new_dot_label): Use it.
* config/tc-mips.c (mips_assembling_insn): New variable.
(md_assemble): Call mips_mark_labels. Set mips_assembling_insn
while the main part of the function is executing.
(mips_compressed_mark_label): New function, split out from...
(mips_compressed_mark_labels): ...here.
(append_insn): Don't call mips_mark_labels here.
(mips_record_label): Make local.
(mips_add_dot_label): New function.
gas/testsuite/
* gas/mips/dot-1.s, gas/mips/dot-1.d, gas/mips/micromips@dot-1.d,
gas/mips/mips16@dot-1.d: New test.
* gas/mips/mips.exp: Run it.
opcodes:
* arm-dis.c: Changed ldra and strl-form mnemonics
to lda and stl-form.
gas:
* config/tc-arm.c: Changed ldra and strl-form mnemonics
to lda and stl-form for armv8.
gas/testsuite:
* gas/arm/armv8-a-bad.l: Updated for changed mnemonics.
* gas/arm/armv8-a-bad.s: Likewise.
* gas/arm/armv8-a.d: Likewise.
* gas/arm/armv8-a.s: Likewise.
* gas/arm/inst.s: Added test for ldrt encoding compatibly with ldralt.
* gas/arm/inst.d: Updated.
bfd/
* bfd-in2.h: Regenerated.
* elf64-aarch64.c
(elf64_aarch64_howto_table): Add R_AARCH64_GOT_LD_PREL19 reloc to HOWTO.
(elf64_aarch64_reloc_map): Add reloc entry.
(aarch64_resolve_relocation): Likewise.
(bfd_elf_aarch64_put_addend): Likewise.
(aarch64_reloc_got_type): Likewise.
(elf64_aarch64_final_link_relocate): Likewise.
(lf64_aarch64_check_relocs): Likewise.
(elf64_aarch64_check_relocs): New case for R_AARCH64_ADR_PREL_LO21
reloc.
* libbfd.h: Regenerated.
* reloc.c (R_AARCH64_GOT_LD_PREL19): New reloc.
gas/
* config/tc-aarch64.c
(reloc_table): Add reloc to table entry.
(parse_address_main): Add support for #:<reloc_op>:<symbol>.
(parse_operands): Check for unused reloc.
(md_apply_fix): New case for reloc.
(aarch64_force_relocation): Likewise.
gas/testsuite
* gas/aarch64/reloc-insn.d
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add expected asm for new reloc test.
* gas/aarch64/reloc-insn.s
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add test for reloc.
include/
* elf/aarch64.h (R_AARCH64_GOT_LD_PREL19): New reloc.
ld/testsuite
* ld-aarch64/aarch64-elf.exp: New reloc tests.
* ld-aarch64/emit-relocs-309-low-bad.d: New file. Expected asm for test
failure (lower bound overflow).
* ld-aarch64/emit-relocs-309-low.d: New file. Expected asm for test
success (lower bound).
* ld-aarch64/emit-relocs-309-up-bad.d: New file. Expected asm for test
failure (upper bound overflow).
* ld-aarch64/emit-relocs-309-up.d: New file. Expected asm for test
success (upper bound).
* ld-aarch64/emit-relocs-309.s: New file. Asm for new reloc tests.
bfd/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* cpu-ia64-opc.c (ins_cnt6a): New function.
(ext_cnt6a): Ditto.
(ins_strd5b): Ditto.
(ext_strd5b): Ditto.
(elf64_ia64_operands): Add new operand types.
gas/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* config/tc-ia64.c (reg_symbol): Add a new register.
(indirect_reg): Ditto.
(pseudo_func): Add new symbolic constants.
(operand_match): Add new operand types recognition.
(operand_insn): Add new register recognition.
(md_begin): Add new register definition.
(specify_resource): Add new register recognition.
gas/testsuite/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* gas/testsuite/gas/ia64/psn.d: New file.
* gas/testsuite/gas/ia64/psn.s: New file.
* gas/testsuite/gas/ia64/ia64.exp: Add new testcase.
* gas/testsuite/gas/ia64/opc-i.d: Fixed failing tests.
* gas/testsuite/gas/ia64/opc-m.d: Ditto.
include/opcode/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64.h (ia64_opnd): Add new operand types.
opcodes/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64-asmtab.h (completer_index): Extend bitfield to full uint.
* ia64-gen.c: Promote completer index type to longlong.
(irf_operand): Add new register recognition.
(in_iclass_mov_x): Add an entry for the new mov_* instruction type.
(lookup_specifier): Add new resource recognition.
(insert_bit_table_ent): Relax abort condition according to the
changed completer index type.
(print_dis_table): Fix printf format for completer index.
* ia64-ic.tbl: Add a new instruction class.
* ia64-opc-i.c (ia64_opcodes_i): Define new I-instructions.
* ia64-opc-m.c (ia64_opcodes_m): Define new M-instructions.
* ia64-opc.h: Define short names for new operand types.
* ia64-raw.tbl: Add new RAW resource for DAHR register.
* ia64-waw.tbl: Add new WAW resource for DAHR register.
* ia64-asmtab.c: Regenerate.
(mark_feature_used): New function.
(parse_barrier): Check specified option is valid for the
specified architecture.
(UL_BARRIER): New macro.
(barrier_opt_names): Update for new barrier options.
* gas/testsuite/gas/arm/armv8-a-barrier.s: New testcase.
* gas/testsuite/gas/arm/armv8-a-barrier-arm.d: Likewise.
* gas/testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* opcodes/arm-dis.c (data_barrier_option): New function.
(print_insn_arm): Use data_barrier_option.
(print_insn_thumb32): Use data_barrier_option.
