Ed Satterthwaite <ehs@broadcom.com>
* cp1.c: Fix more comment spelling and formatting.
(value_fcr, store_fcr): Use fenr_FS rather than hard-coding value.
(denorm_mode): New function.
(fpu_unary, fpu_binary): Round results after operation, collect
status from rounding operations, and update the FCSR.
(convert): Collect status from integer conversions and rounding
operations, and update the FCSR. Adjust NaN values that result
from conversions. Convert to use sim_io_eprintf rather than
fprintf, and remove some debugging code.
* cp1.h (fenr_FS): New define.
(z8k_inv_list): Delete global.
(DIRTY_HACK): Delete macro.
(makelist): Delete global.
(main): Delete code making a list. Delete dirty hack code. Use
lookup_inst instead of z8k_inv_list.
* list.c: Delete file.
* Makefile.in (writecode): Do not link in list.o.
(list.o): Delete target.
* sim-main.h (FGRIDX): Remove, replace all uses with...
(FGR_BASE): New macro.
(FP0_REGNUM, FCRCS_REGNUM, FCRIR_REGNUM): New macros.
(_sim_cpu): Move 'fgr' member to be right before 'fpr_state' member.
(NR_FGR, FGR): Likewise.
* interp.c: Replace all uses of FGRIDX with FGR_BASE.
* mips.igen: Likewise.
* sim-main.h (Nan, Infinity, Less, Equal, AbsoluteValue, Negate)
(Add, Sub, Multiply, Divide, Recip, SquareRoot): Move lower in
file, remove PARAMS from prototypes.
(value_fpr, store_fpr, convert): Likewise. Use SIM_STATE to provide
simulator state arguments.
(ValueFPR, StoreFPR, Convert): Move lower in file. Use SIM_ARGS to
pass simulator state arguments.
* cp1.c (SD): Redefine as CPU_STATE(cpu).
(store_fpr, convert): Remove 'sd' argument.
(value_fpr): Likewise. Convert to use 'SD' instead.
Ed Satterthwaite <ehs@broadcom.com>
* configure.in (mipsisa64sb1*-*-*): New target for supporting
Broadcom SiByte SB-1 processor configurations.
* configure: Regenerate.
* sb1.igen: New file.
* mips.igen: Include sb1.igen.
(sb1): New model.
* Makefile.in (IGEN_INCLUDE): Add sb1.igen.
* mdmx.igen: Add "sb1" model to all appropriate functions and
instructions.
* mdmx.c (AbsDiffOB, AvgOB, AccAbsDiffOB): New functions.
(ob_func, ob_acc): Reference the above.
(qh_acc): Adjust to keep the same size as ob_acc.
* sim-main.h (status_SBX, MX_VECT_ABSD, MX_VECT_AVG, MX_AbsDiff)
(MX_Avg, MX_VECT_ABSDA, MX_AbsDiffC): New macros.
* interp.c (sim_create_inferior): Add comment.
From Alan Matsuoka <alanm@redhat.com>:
From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
* simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
(OP_4401): Output "mvf0t" instead of "mf0t".
(OP_460B): Do not output a flag register.
(OP_4609): Do not output a flag register.
* sim-d10v.h: New file. Moved from include/sim-d10v.h.
* Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
* interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* d10v-tdep.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* Makefile.in (sim_d10v_h): Update definition.
include:
* dis-asm.h (print_insn_shl, print_insn_sh64l): Remove prototype.
gdb:
* sh-tdep.c (gdb_print_insn_sh64): Delete.
(gdb_print_insn_sh): Just set info->endian and use print_insn_sh.
(sh_gdbarch_init): Always use gdb_print_insn_sh.
opcodes:
* disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
* sh-dis.c (LITTLE_BIT): Delete.
(print_insn_sh, print_insn_shl): Deleted.
(print_insn_shx): Renamed to
(print_insn_sh). No longer static. Handle SHmedia instructions.
Use info->endian to determine endianness.
* sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
(print_insn_sh64x): No longer static. Renamed to
(print_insn_sh64). Removed pfun_compact and endian arguments.
If we got an uneven address to indicate SHmedia, adjust it.
Return -2 for SHcompact instructions.
sim/sh64:
* sim-if.c (sh64_disassemble_insn): Use print_insn_sh instead of
print_insn_shl.
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* callback.c: Use 'deprecated' rather than 'depreciated.'
[ igen/ChangeLog ]
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* igen.c: Use 'deprecated' rather than 'depreciated.'
[ mips/ChangeLog ]
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* interp.c: Use 'deprecated' rather than 'depreciated.'
* sim-main.h: Likewise.
* cp1.c (store_fpr): Remove #ifdef'd out call to UndefinedResult
which wouldn't compile anyway.
* sim-main.h (unpredictable_action): New function prototype.
(Unpredictable): Define to call igen function unpredictable().
(NotWordValue): New macro to call igen function not_word_value().
(UndefinedResult): Remove.
* interp.c (undefined_result): Remove.
(unpredictable_action): New function.
* mips.igen (not_word_value, unpredictable): New functions.
(ADD, ADDI, do_addiu, do_addu, BGEZAL, BGEZALL, BLTZAL, BLTZALL)
(CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, do_mult, do_multu)
(do_sra, do_srav, do_srl, do_srlv, SUB, do_subu): Invoke
NotWordValue() to check for unpredictable inputs, then
Unpredictable() to handle them.
* ppc-instructions (lswx): Do the register control with the
register count. Initialize the right register in the loop.
(mtfsfi) : Correct prefix for the instruction.
* cp1.c (fpu_format_name): New function to replace...
(DOFMT): This. Delete, and update all callers.
(fpu_rounding_mode_name): New function to replace...
(RMMODE): This. Delete, and update all callers.
* interp.c: Move FPU support routines from here to...
* cp1.c: Here. New file.
* Makefile.in (SIM_OBJS): Add cp1.o to object list.
(cp1.o): New target.
* configure.in (mipsisa32*-*-*, mipsisa64*-*-*): New targets.
* mips.igen (mips32, mips64): New models, add to all instructions
and functions as appropriate.
(loadstore_ea, check_u64): New variant for model mips64.
(check_fmt_p): New variant for models mipsV and mips64, remove
mipsV model marking fro other variant.
(SLL) Rename to...
(SLLa) this.
(CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, SLLb): New instructions
for mips32 and mips64.
(DCLO, DCLZ): New instructions for mips64.
* mips.igen (BREAK, LUI, ORI, SYSCALL, XORI): Print
immediate or code as a hex value with the "%#lx" format.
(ANDI): Likewise, and fix printed instruction name.
cpu struct.
(sim_hw_configure): Connect the capture input/output events.
* sim-main.h (_sim_cpu): New member hw_cpu.
(m68hc11cpu_set_oscillator): Declare.
(m68hc11cpu_clear_oscillator): Declare.
(m68hc11cpu_set_port): Declare.
* dv-m68hc11.c (m68hc11_options): New for oscillator commands.
(m68hc11cpu_ports): New input ports and output ports to reflect
the HC11 IOs.
(m68hc11_delete): Cleanup any running oscillator.
(attach_m68hc11_regs): Create the input oscillators.
(make_oscillator): New function.
(find_oscillator): New function.
(oscillator_handler): New function.
(reset_oscillators): New function.
(m68hc11cpu_port_event): Handle the new input ports.
(m68hc11cpu_set_oscillator): New function.
(m68hc11cpu_clear_oscillator): New function.
(get_frequency): New function.
(m68hc11_option_handler): New function.
(m68hc11cpu_set_port): New function.
(m68hc11cpu_io_write): Post the port output events.
* dv-m68hc11spi.c (set_bit_port): Use m68hc11cpu_set_port to set
the output port value.
* dv-m68hc11tim.c (m68hc11tim_port_event): Handle CAPTURE event
by latching the TCNT value in the register.
vector address according to cpu mode.
(interrupts_initialize): Move reset portion to the above.
(interrupt_names): New table to give a name to interrupts.
(idefs): Handle pulse accumulator interrupts.
(interrupts_info): Print the interrupt history.
(interrupt_option_handler): New function.
(interrupt_options): New table of options.
(interrupts_update_pending): Keep track of when interrupts are
raised and implement breakpoint-on-raise-interrupt.
(interrupts_process): Keep track of when interrupts are taken
and implement breakpoint-on-interrupt.
* interrupts.h (struct interrupt_history): Define.
(struct interrupt): Keep track of the interrupt history.
(interrupts_reset): Declare.
(interrupts_initialize): Update prototype.
* m68hc11_sim.c (cpu_reset): Reset interrupts.
(cpu_initialize): Cleanup.
* sim-main.h (status_UX, status_SX, status_KX, status_TS)
(status_PX, status_MX, status_CU0, status_CU1, status_CU2)
(status_CU3): New definitions.
* sim-main.h (ExceptionCause): Add new values for MIPS32
and MIPS64: MDMX, MCheck, CacheErr. Update comments
for DebugBreakPoint and NMIReset to note their status in
MIPS32 and MIPS64.
(SignalExceptionMDMX, SignalExceptionWatch, SignalExceptionMCheck)
(SignalExceptionCacheErr): New exception macros.
* mips.igen (check_fpu): Enable check for coprocessor 1 usability.
* sim-main.h (COP_Usable): Define, but for now coprocessor 1
is always enabled.
(SignalExceptionCoProcessorUnusable): Take as argument the
unusable coprocessor number.
* mips.igen (check_fmt, check_fmt_p): New functions to check
whether specific floating point formats are usable.
(ABS.fmt, ADD.fmt, CEIL.L.fmt, CEIL.W, DIV.fmt, FLOOR.L.fmt)
(FLOOR.W.fmt, MOV.fmt, MUL.fmt, NEG.fmt, RECIP.fmt, ROUND.L.fmt)
(ROUND.W.fmt, RSQRT.fmt, SQRT.fmt, SUB.fmt, TRUNC.L.fmt, TRUNC.W):
Use the new functions.
(do_c_cond_fmt): Remove format checks...
(C.cond.fmta, C.cond.fmtb): And move them into all callers.
* mips.igen (loadstore_ea): New function to do effective
address calculations.
(do_load, do_load_left, do_load_right, LL, LDD, PREF, do_store,
do_store_left, do_store_right, SC, SCD, PREFX, SWC1, SWXC1,
CACHE): Use loadstore_ea to do effective address computations.
* mips.igen (PREFX): Tweak instruction opcode fields (i.e.,
add a comma) so that it more closely match the MIPS ISA
documentation opcode partitioning.
(PREF): Put useful names on opcode fields, and include
instruction-printing string.
* mips.igen (check_u64): New function which in the future will
check whether 64-bit instructions are usable and signal an
exception if not. Currently a no-op.
(DADD, DADDI, DADDIU, DADDU, DDIV, DDIVU, DMULT, DMULTU, DSLL,
DSLL32, DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB,
DSUBU, LD, LDL, LDR, LLD, LWU, SCD, SD, SDL, SDR, DMxC1, LDXC1,
LWXC1, SDXC1, SWXC1, DMFC0, DMTC0): Use check_u64.
* mips.igen (check_fpu): New function which in the future will
check whether FPU instructions are usable and signal an exception
if not. Currently a no-op.
(ABS.fmt, ADD.fmt, BC1a, BC1b, C.cond.fmta, C.cond.fmtb,
CEIL.L.fmt, CEIL.W, CxC1, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt,
CVT.W.fmt, DIV.fmt, DMxC1, DMxC1, FLOOR.L.fmt, FLOOR.W.fmt, LDC1,
LDXC1, LWC1, LWXC1, MADD.D, MADD.S, MxC1, MOV.fmt, MOVtf,
MOVtf.fmt, MOVN.fmt, MOVZ.fmt, MSUB.D, MSUB.S, MUL.fmt, NEG.fmt,
NMADD.D, NMADD.S, NMSUB.D, NMSUB.S, RECIP.fmt, ROUND.L.fmt,
ROUND.W.fmt, RSQRT.fmt, SDC1, SDXC1, SQRT.fmt, SUB.fmt, SWC1,
SWXC1, TRUNC.L.fmt, TRUNC.W): Use check_fpu.
* mips.igen (do_load_left, do_load_right): Move to be immediately
following do_load.
(do_store_left, do_store_right): Move to be immediately following
do_store.
* mips.igen: Add some additional comments about supported
models, and about which instructions go where.
(BC1b, MFC0, MTC0, RFE): Sort supported models in the same
order as is used in the rest of the file.
* mips.igen (ADD, ADDI, DADDI, DSUB, SUB): Add comment
indicating that ALU32_END or ALU64_END are there to check
for overflow.
(DADD): Likewise, but also remove previous comment about
overflow checking.
* mips.igen (ADDI): Print immediate value.
(BREAK): Print code.
(DADDIU, DSRAV, DSRLV): Print correct instruction name.
(SLL): Print "nop" specially, and don't run the code
that does the shift for the "nop" case.
* igen.c (main): Change -I to add include paths for :include:
files.
Implement -G as per sim/igen, with just gen-icache=N support.
Call load_insn_table() with the built include path.
* ld-insn.c (parse_include_entry): New. Load an :include: file.
(load_insn_table): New `includes' argument. Look for :include:
entries and call parse_include_entry() for them.
(main): Adjust load_insn_table() call.
* ld-insn.h (model_include_fields): New enum.
(load_insn_table): Update prototype.
* table.c (struct _open_table, struct _table): Rework
structures to handle included files.
(table_push): Move the guts of table_open() here.
* table.c (struct _open table, struct table): Make table object an
indirect ptr to the current table file.
(current_line, new_table_entry, next_line): Make file arg type
open_table.
(table_open): Use table_push.
(table_entry_read): Point variable file at current table, at eof, pop
last open table.
* misc.h (NZALLOC): New macro. From sim/igen.
* table.h, table.c (table_push): New function.
(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
* lib/sim-defs.exp (run_sim_test): Include a description such as
"assembling" or "linking" that identifies the phase a test fails
in, for easier analysis of failures.
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
pending interrupts.
* interrupts.c (interrupts_process): Keep track of the last number
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
(interrupts_update_pending): Compute clear and set masks of
interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
2001-03-16 Frank Ch. Eigler <fche@redhat.com>
Add support for mmap-based memory regions.
* sim-memopt.c (mmap_next_fd): New global.
(sim_memory_init): Reinitialize it.
(OPTION_MEMORY_MAPFILE, memory_option_handler): Support new
"--memory-mapfile FILE" option. Check for some errors.
(do_memopt_add): Conditionally do mmap instead of malloc for
backing store of simulated memory. Check for more errors.
(do_simopt_delete, sim_memory_uninstall): Corresponding cleanup.
* sim-memopt.h (munmap_length): New member of _sim_memopt.
* configure.in: Look for mmap/fstat related functions and headers.
* config.in, configure: Regenerated.
2001-02-09 Ben Elliston <bje@redhat.com>
* (profile_print_pc): Write header out in target byte order.
2001-02-09 Ben Elliston <bje@redhat.com>
* sim-profile.c (profile_pc_init): Correct bug in loop logic when
adjusting the pc shift value.
later inspection by the trap handler.
(count_argc): New function.
(prog_argv): Declare static.
(sim_write): Declare.
(trap): Implement argc, argnlen and argn system calls. Do not
abort on unknown system calls--simply return -1.
* syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
[common/ChangeLog]
2001-01-12 Chris Demetriou <cgd@sibyte.com>
* aclocal.m4 (SIM_AC_OPTION_SCACHE): Properly
handle the case where a numeric value is supplied.
[eg. m32r/ChangeLog]
2001-01-12 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated with sim_scache fix.
* sim-fpu.h (sim_fpu_printn_fpu): Declare.
* sim-fpu.c (print_bits): Add digits parameter. Print only as many
trailing digits as specified (-1 to print all digits).
(sim_fpu_print_fpu): New wrapper around sim_fpu_printn_fpu.
(sim_fpu_printn_fpu): Rename from sim_fpu_print_fpu; update calls
to print_bits ().
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
In sim/ppc:
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
* lib/sim-defs.exp (run_sm_test): Correct comment. "output" and
"xerror" options do not use a list of machines. Clear options from
previous test case. Use "$cpu_option" to identify the machine to the
assembler, if specified.
* cgen.sh: Handle an isa argument between cpu and mach. Default to
`all'. Pass `-i' options to cgen applications.
* Make-common.in (cgen-arch, cgen-cpu, cgen-decode, cgen-cpu-decode,
cgen-desc): Pass $(isa) to cgen.sh.
2000-10-19 Frank Ch. Eigler <fche@redhat.com>
On advice from Chris G. Demetriou <cgd@sibyte.com>:
* sim-main.h (GPR_CLEAR): Remove unused alternative macro.
* dv-m68hc11tim.c (cycle_to_string): New function to translate
the cpu cycle into some formatted time string.
(m68hc11tim_print_timer): Use it.
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
* dv-m68hc11spi.c (m68hc11spi_info): Likewise.
* interrupts.c (interrupts_info): Likewise.
* m68hc11_sim.c (cpu_info): Likewise.
* sim-profile.h (PROFILE_DATA): Add cpu_freq.
(PROFILE_CPU_FREQ): New macro.
* sim-profile.c (OPTION_PROFILE_CPU_FREQUENCY): New enumerator.
(profile-options): Add profile-cpu-frequency.
(parse_frequency): New function.
(profile_option_handler): Handle OPTION_PROFILE_CPU_FREQUENCY.
(profile_print_speed): Print cpu frequency and simulated execution time.
Re-indent other items to match.
(movm): Initialize PC and mask.
(mov, movbu, movhu): Set srcreg2 from RI0.
(bsch): Initialize c.
(sat16_cmp): Actually do the comparison.
(mov_llt): Do not overwrite dstreg with uninitialized variable.
