for "<foo>a". Issue error messages for unrecognised or corrrupt
size extensions.
* gas/msp430/bad.s: New test: Checks erroneous size extensions.
* gas/msp430/bad.d: New test command file.
* gas/msp430/bad.l: New file: Expected error messages.
* gas/msp430/msp430.exp: Run the new test.
* gas/msp430/msp430x.s: Add "<foo>.a" aliases of "<foo>a"
instructions.
* gas/msp430/msp430x.d: Update expected disassembly.
(move_data): New variable.
(md_parse_option): Parse -md.
(msp430_section): New function. Catch references to the .bss or
.data sections and generate a special symbol for use by the libcrt
library.
(md_pseudo_table): Intercept .section directives.
(md_longopt): Add -md
(md_show_usage): Likewise.
(msp430_operands): Generate a warning message if a NOP is inserted
into the instruction stream.
* doc/c-msp430.texi (node MSP430 Options): Document -md option.
The existing code would accept VLD2.64 and similar undefined
instructions.
gas/ChangeLog:
2013-09-16 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ld_st_interleave): Add constraint
disallowing element size 64 with interleave other than 1.
gas/testsuite/ChangeLog:
2013-09-16 Will Newton <will.newton@linaro.org>
* gas/arm/neon-ldst-es.d: Add VLD1.64 instructions.
* gas/arm/neon-ldst-es.s: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.d: New file.
* testsuite/gas/arm/neon-ldst-es-bad.l: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.s: Likewise.
* config/tc-ppc.c (md_apply_fix): Handle defined after use toc
symbols.
gas/testsuite/
* gas/ppc/aix.exp: Run xcoff-toc-1 test.
* gas/ppc/xcoff-toc-1.s, gas/ppc/xcoff-toc-1.d: New test.
* config/tc-arm.c (T16_32_TAB): Add _udf.
(do_t_udf): New function.
(insns): Add "udf".
* gas/arm/udf-bad.s: New file.
* gas/arm/udf-bad.d: New file.
* gas/arm/udf-bad.l: New file.
* gas/arm/udf.s: New file.
* gas/arm/udf.d: New file.
* gas/arm/udf.l: New file.
* arm-dis.c (arm_opcodes): Add udf.
(thumb_opcodes): Use "udf" mnemonic rather than UNDEFINED_INSTRUCTION.
(thumb32_opcodes): Add udf.w.
(print_insn_thumb32): Handle %H as the thumb32_opcodes comment says.
immediate is not suitable for the 32-bit ABI.
* gas/aarch64/illegal.s: Add illegal constant for logical
operation.
* gas/aarch64/illegal.l: Add expected error message.
NEON vector load and store instructions do not accept immediates
or pre-indexed base plus offset addressing modes, so make sure that
the assembler enforces this.
gas/ChangeLog:
2013-08-23 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ldx_stx): Add extra constraints
for pre-indexed addressing modes.
* testsuite/gas/arm/neon-addressing-bad.l: Add test for
VLDn and VSTn instructions.
* testsuite/gas/arm/neon-addressing-bad.s: Likewise.
gas/testsuite/ChangeLog:
2013-08-23 Will Newton <will.newton@linaro.org>
* testsuite/gas/arm/neon-addressing-bad.l: Add test for
VLDn and VSTn instructions.
* testsuite/gas/arm/neon-addressing-bad.s: Likewise.
* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
* config/tc-mips.c (mips_arg_info): Replace allow_nonconst and
lax_max with lax_match.
(match_int_operand): Update accordingly. Don't report an error
for !lax_match-only cases.
(match_insn): Replace more_alts with lax_match and use it to
initialize the mips_arg_info field. Add a complete_p parameter.
Handle implicit VU0 suffixes here.
(match_invalid_for_isa, match_insns, match_mips16_insns): New
functions.
(mips_ip, mips16_ip): Use them.
* config/tc-mips.c (mips_arg_info): Remove soft_match.
(match_out_of_range, match_not_constant): New functions.
(match_const_int): Remove fallback parameter and check for soft_match.
Use match_not_constant.
(match_mapped_int_operand, match_addiusp_operand)
(match_perf_reg_operand, match_save_restore_list_operand)
(match_mdmx_imm_reg_operand): Update accordingly. Use
match_out_of_range and set_insn_error* instead of as_bad.
(match_int_operand): Likewise. Use match_not_constant in the
!allows_nonconst case.
(match_float_constant): Report invalid float constants.
(match_insn, match_mips16_insn): Remove soft_match code. Rely on
match_float_constant to check for invalid constants. Fail the
match if match_const_int or match_float_constant return false.
(mips_ip): Update accordingly.
(mips16_ip): Likewise. Undo null termination of instruction name
once lookup is complete.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips16e-64.l,
gas/mips/mips32r2-ill-fp64.l, gas/mips/mips32r2-ill-nofp.l,
gas/mips/mips32r2-ill.l, gas/mips/mips64r2-ill.l,
gas/mips/octeon-ill.l, gas/mips/r5900-error-vu0.l,
gas/mips/vr5400-ill.l: Adjust expected errors.
* gas/mips/micromips-size-0.l,
gas/mips/micromips-size-0.s: Likewise. Add new tests.
* gas/mips/mips16e-save-err.s, gas/mips/mips16e-save-err.l: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips_insn_error_format): New enum.
(mips_insn_error): New struct.
(insn_error): Change to a mips_insn_error.
(clear_insn_error, set_insn_error_format, set_insn_error)
(set_insn_error_i, set_insn_error_ss, report_insn_error): New
functions.
(mips_parse_argument_token, md_assemble, match_insn)
(match_mips16_insn): Use them instead of manipulating insn_error
directly.
(mips_ip, mips16_ip): Likewise. Simplify control flow.
gas/testsuite/
* gas/mips/micromips-ill.l: Expect "floating-point expression required"
* config/tc-mips.c (normalize_constant_expr): Move further up file.
(normalize_address_expr): Likewise.
(match_insn, match_mips16_insn): New functions, split out from...
(mips_ip, mips16_ip): ...here.
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Add a suffixless version of
VCLIPW.
gas/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel
suffixes to be elided too.
(mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here.
(mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N
to be omitted too.
gas/testsuite/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d: Allow
single-channel suffixes to be elided.
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
* config/tc-mips.c (mips16_macro): Don't use move_register.
(mips16_ip): Allow macros to use 'p'.
gas/testsuite/
* gas/mips/mips16-macro.s, gas/mips/mips16-macro.d: New test.
* gas/mips/mips.exp: Run it.
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31)
(MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH)
(MIPS16_INSN_COND_BRANCH): Delete.
opcodes/
* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
(WR_SP): Replace with...
(MOD_SP): ...this.
(mips16_opcodes): Update accordingly.
* mips-dis.c (print_insn_mips16): Likewise.
gas/
* config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
flags for MIPS16 and non-MIPS16 instructions.
(gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
(gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
(gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
(can_swap_branch_p, get_append_method): Use the same flags for MIPS16
and non-MIPS16 instructions. Fix formatting.
gas/
* config/tc-aarch64.c (enum aarch64_abi_type): New enumeration tag.
(AARCH64_ABI_LP64, AARCH64_ABI_ILP32): New enumerators.
(aarch64_abi): New variable.
(ilp32_p): Change to be a macro.
(aarch64_opts): Remove the support for option -milp32 and -mlp64.
(struct aarch64_option_abi_value_table): New struct.
(aarch64_abis): New table.
(aarch64_parse_abi): New function.
(aarch64_long_opts): Add entry for -mabi=.
* doc/as.texinfo (Target AArch64 options): Document -mabi.
* doc/c-aarch64.texi: Likewise.
gas/testsuite/
* gas/aarch64/ilp32-basic.d (#as): Update to use -mabi=ilp32
RX610.
* config/rx-parse.y: (rx_check_float_support): Add function to
check floating point operation support for target RX100 and
RX200.
* config/tc-rx.c: Add CPU options RX100, RX200, RX600, and RX610.
* doc/c-rx.texi: Add -mcpu option to recognize macros for RX100,
RX200, RX600, and RX610
* config/tc-mips.c (mips_prefer_vec_regno, mips_parse_register):
New functions, split out from...
(reg_lookup): ...here. Remove itbl support.
(reglist_lookup): Delete.
(mips_operand_token_type): New enum.
(mips_operand_token): New structure.
(mips_operand_tokens): New variable.
(mips_add_token, mips_parse_base_start, mips_parse_argument_token)
(mips_parse_arguments): New functions.
(md_begin): Initialize mips_operand_tokens.
(mips_arg_info): Add a token field. Remove optional_reg field.
(match_char, match_expression): New functions.
(match_const_int): Use match_expression. Remove "s" argument
and return a boolean result. Remove O_register handling.
(match_regno, match_reg, match_reg_range): New functions.
(match_int_operand, match_mapped_int_operand, match_msb_operand)
(match_reg_operand, match_reg_pair_operand, match_perf_reg_operand)
(match_addiusp_operand, match_clo_clz_dest_operand)
(match_lwm_swm_list_operand, match_entry_exit_operand)
(match_save_restore_list_operand, match_mdmx_imm_reg_operand)
(match_tied_reg_operand): Remove "s" argument and return a boolean
result. Match tokens rather than text. Update calls to
match_const_int. Rely on match_regno to call check_regno.
(match_pcrel_operand, match_pc_operand): Replace "s" argument with
"arg" argument. Return a boolean result.
(parse_float_constant): Replace with...
(match_float_constant): ...this new function.
(match_operand): Remove "s" argument and return a boolean result.
Update calls to subfunctions.
(mips_ip, mips16_ip): Call mips_parse_arguments. Use match routines
rather than string-parsing routines. Update handling of optional
registers for token scheme.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: Add some more cases.
* gas/mips/micromips-ill.s, gas/mips/micromips-ill.l: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips32_to_16_reg_map): Delete.
(match_entry_exit_operand): New function.
(match_save_restore_list_operand): Likewise.
(match_operand): Use them.
(check_absolute_expr): Delete.
(mips16_ip): Rewrite main parsing loop to use mips_operands.
* config/tc-mips.c: Enable functions commented out in previous patch.
(SKIP_SPACE_TABS): Move further up file.
(mips32_to_micromips_reg_b_map, mips32_to_micromips_reg_c_map)
(mips32_to_micromips_reg_d_map, mips32_to_micromips_reg_e_map)
(ips32_to_micromips_reg_f_map, mips32_to_micromips_reg_g_map)
(mips32_to_micromips_reg_l_map, mips32_to_micromips_reg_m_map)
(mips32_to_micromips_reg_q_map, mips32_to_micromips_reg_n_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(mips_lookup_reg_pair): Delete.
(macro): Use report_bad_range and report_bad_field.
(mips_immed, expr_const_in_range): Delete.
(mips_ip): Rewrite main parsing loop to use new functions.
gas/testsuite/
* gas/mips/at-2.l: Remove duplicated $at warnings.
* gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips32r2-ill.l,
gas/mips/mips32r2-ill-nofp.l, gas/mips/mips32r2-ill-fp64.l,
gas/mips/mips64r2-ill.l, gas/mips/octeon-ill.l: Update error
messages. Expect negative numbers to be printed as such,
rather than as large unsigned positive numbers.
* config/tc-mips.c (mips_oddfpreg_ok): Move further up file.
Change return type to bfd_boolean.
(report_bad_range, report_bad_field): New functions.
(mips_arg_info): New structure.
(match_const_int, convert_reg_type, check_regno, match_int_operand)
(match_mapped_int_operand, match_msb_operand, match_reg_operand)
(match_reg_pair_operand, match_pcrel_operand, match_perf_reg_operand)
(match_addiusp_operand, match_clo_clz_dest_operand)
(match_lwm_swm_list_operand, match_mdmx_imm_reg_operand)
(match_pc_operand, match_tied_reg_operand, match_operand)
(check_completed_insn): New functions, commented out for now.
* config/tc-mips.c (insn_insert_operand): New function.
(macro_build, mips16_macro_build): Put null character check
in the for loop and convert continues to breaks. Use operand
structures to handle constant operands.
* mips.h (mips_operand_type, mips_reg_operand_type): New enums.
(mips_operand, mips_int_operand, mips_mapped_int_operand)
(mips_msb_operand, mips_reg_operand, mips_reg_pair_operand)
(mips_pcrel_operand): New structures.
(mips_insert_operand, mips_extract_operand, mips_signed_operand)
(mips_decode_int_operand, mips_decode_pcrel_operand): New functions.
(decode_mips_operand, decode_micromips_operand): Declare.
opcodes/
* mips-formats.h: New file.
* mips-opc.c: Include mips-formats.h.
(reg_0_map): New static array.
(decode_mips_operand): New function.
* micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
(int_c_map): New static arrays.
(decode_micromips_operand): New function.
* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(print_reg): New function.
(mips_print_arg_state): New structure.
(init_print_arg_state, print_insn_arg): New functions.
(print_insn_args): Change interface and use mips_operand structures.
Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips): ...here. Update the call to print_insn_args.
(print_insn_micromips): Use print_insn_args.
gas/
* config/tc-mips.c (validate_mips_insn): Move further up file.
Add insn_bits and decode_operand arguments. Use the mips_operand
fields to work out which bits an operand occupies. Detect double
definitions.
(validate_micromips_insn): Move further up file. Call into
validate_mips_insn.
* config/tc-mips.c (imm_expr, imm2_expr, offset_expr): Tweak commentary.
(imm_reloc): Delete.
(md_assemble): Remove imm_reloc handling.
(mips_ip): Update commentary. Use offset_expr and offset_reloc
rather than imm_expr and imm_reloc for 'i', 'j' and 'u'.
Use a temporary array rather than imm_reloc when parsing
constant expressions. Remove imm_reloc initialization.
(mips16_ip): Update commentary. Use offset_expr and offset_reloc
for the relaxable field. Use a relax_char variable to track the
type of this field. Remove imm_reloc initialization.
* mips.h (EF_MIPS_NAN2008): New macro.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Handle
EF_MIPS_NAN2008.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
binutils/
* readelf.c (get_machine_flags): Handle EF_MIPS_NAN2008.
gas/
* config/tc-mips.c (mips_flag_nan2008): New variable.
(options): Add OPTION_NAN enum value.
(md_longopts): Handle it.
(md_parse_option): Likewise.
(s_nan): New function.
(mips_elf_final_processing): Handle EF_MIPS_NAN2008.
(md_show_usage): Add -mnan.
* doc/as.texinfo (Overview): Add -mnan.
* doc/c-mips.texi (MIPS Opts): Document -mnan.
(MIPS NaN Encodings): New node. Document .nan directive.
(MIPS-Dependent): List the new node.
gas/testsuite/
* gas/mips/nan-2008-1.d: New test.
* gas/mips/nan-2008-2.d: New test.
* gas/mips/nan-2008-3.d: New test.
* gas/mips/nan-2008-4.d: New test.
* gas/mips/nan-legacy-1.d: New test.
* gas/mips/nan-legacy-2.d: New test.
* gas/mips/nan-legacy-3.d: New test.
* gas/mips/nan-legacy-4.d: New test.
* gas/mips/nan-legacy-5.d: New test.
* gas/mips/nan-error-1.l: New list test.
* gas/mips/nan-error-2.l: New list test.
* gas/mips/nan-2008-override.s: New test source.
* gas/mips/nan-2008.s: New test source.
* gas/mips/nan-legacy-override.s: New test source.
* gas/mips/nan-legacy.s: New test source.
* gas/mips/nan-error-1.s: New test source.
* gas/mips/nan-error-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/nan-2008.d: New test.
* ld-mips-elf/nan-legacy.d: New test.
* ld-mips-elf/nan-mixed-1.d: New test.
* ld-mips-elf/nan-mixed-2.d: New test.
* ld-mips-elf/nan-2008.s: New test source.
* ld-mips-elf/nan-legacy.s: New test source.
2013-07-09 Tristan Gingold <gingold@adacore.com>
* configure.com: Add new defines to match changes in configure.
gas/
2013-07-09 Tristan Gingold <gingold@adacore.com>
* configure.com: Define HAVE_SYS_TYPES_H and HAVE_UNISTD_H
* config/tc-mips.c (mips_ip): Unconditionally parse an expression
for 'A' and assume that the constant has been elided if the result
is an O_register.
gas/testsuite/
* gas/mips/la.s, gas/mips/la.d, gas/mips/la-svr4pic.d,
gas/mips/la-xgot.d: Add tests for bracketed addresses.
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB)
(M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB)
(M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A)
(M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB)
(M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB)
(M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB)
(M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB)
(M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB)
(M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A)
(M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A)
(M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB)
(M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete.
(M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A):
Rename to...
(M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB)
(M_USD_AB): ...these.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
and SD A(B) macros up.
* micromips-opc.c (micromips_opcodes): Likewise.
gas/
* config/tc-mips.c (gprel16_reloc_p): New function.
(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
BFD_RELOC_UNUSED.
(offset_high_part, small_offset_p): New functions.
(nacro): Use them. Remove *_OB and *_DOB cases. For single-
register load and store macros, handle the 16-bit offset case first.
If a 16-bit offset is not suitable for the instruction we're
generating, load it into the temporary register using
ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
M_L_DAB code once the address has been constructed. For double load
and store macros, again handle the 16-bit offset case first.
If the second register cannot be accessed from the same high
part as the first, load it into AT using ADDRESS_ADDI_INSN.
Fix the handling of LD in cases where the first register is the
same as the base. Also handle the case where the offset is
not 16 bits and the second register cannot be accessed from the
same high part as the first. For unaligned loads and stores,
fuse the offbits == 12 and old "ab" handling. Apply this handling
whenever the second offset needs a different high part from the first.
Construct the offset using ADDRESS_ADDI_INSN where possible,
for offbits == 16 as well as offbits == 12. Use offset_reloc
when constructing the individual loads and stores.
(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
and offset_reloc before matching against a particular opcode.
Handle elided 'A' constants. Allow 'A' constants to use
relocation operators.
gas/testsuite/
* gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for
truncated constants.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding
16-bit constants to the base.
* gas/mips/micromips@mcu.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips.d, gas/mips/micromips-insn32.d,
gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise.
Allow the full 16-bit offset range to be used for SB, LB and LBU in
USH and ULH sequences. Fix the expected output for LD and SD when
the two LW and SW offsets need different high parts.
* gas/mips/eva.s: Test PREFE with relocation operators.
* gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit
constants. Update after eva.s change.
* gas/mips/micromips@eva.d: Likewise.
* gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s,
gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d,
gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s,
gas/mips/ulh-reloc.d: New tests.
* gas/mips/mips.exp: Run them.
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
* mips.h: Update documentation of "+s" and "+S".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
"+S" for "cins".
* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
Combine cases.
gas/
* config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
Require the msb to be <= 31 for "+s". Check that the size is <= 31
for both "+s" and "+S".
* mips.h: Document "+i".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
"jalx".
* mips16-opc.c (mips16_opcodes): Likewise.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_mips16_insn_arg)
(print_insn_mips16): Handle "+i".
(print_insn_micromips): Likewise. Conditionally preserve the
ISA bit for "a" but not for "+i".
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
(mips_ip, mips16_ip): Handle "+i".
* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
opcodes/
* s390-opc.c (J12_12, J24_24): New macros.
(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
(MASK_MII_UPI): Rename to MASK_MII_UPP.
* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
include/elf/
* s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL,
R_390_PC24DBL, and R_390_PLT24DBL.
gas/testsuite/
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
variants requiring relocations.
* gas/s390/zarch-zEC12.d: Likewise.
gas/
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
relocs.
bfd/
* elf32-s390.c: Add new relocation definitions R_390_PC12DBL,
R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL.
(elf_s390_reloc_type_lookup, elf_s390_check_relocs)
(elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new
relocations.
* elf64-s390.c: See elf32-s390.c
* bfd-in2.h: Add new relocs to enum bfd_reloc_code_real.
* libbfd.h: Add new reloc strings.
* elf64-ppc.c (ppc64_elf_relocate_section): Set "relocation" for
.TOC. after relocatable check.
gas/
* config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
and gas.
bfd/
* Makefile.am (BFD64_BACKENDS): Add elf32-aarch64.lo.
(BUILD_CFILES): Add elf32-aarch64.c.
(elf32-aarch64.c): New rule for generating from elfnn-aarch64.c.
* Makefile.in: Re-generated.
* archures.c (bfd_mach_aarch64_ilp32): New define.
* bfd-in.h (bfd_elf32_aarch64_init_maps): New declaration.
(bfd_elf32_aarch64_set_options): Ditto.
(elf32_aarch64_setup_section_lists): Ditto.
(elf32_aarch64_next_input_section): Ditto.
(elf32_aarch64_size_stubs): Ditto.
(elf32_aarch64_build_stubs): Ditto.
* bfd-in2.h: Re-generated.
* config.bfd (aarch64-*-elf): Add bfd_elf32_littleaarch64_vec
and bfd_elf32_bigaarch64_vec.
(aarch64-*-linux*): Likewise.
(aarch64_be-*-elf): Likewise.
(aarch64_be-*-linux*): Likewise.
* configure.in (bfd_elf32_bigaarch64_vec)
(bfd_elf32_littleaarch64_vec): New.
* configure: Re-generated.
* cpu-aarch64.c (compatible): Don't allow mixing ilp32 objects with
lp64 ones.
(bfd_aarch64_arch_ilp32): New.
(bfd_aarch64_arch): Link to bfd_aarch64_arch_ilp32.
* elfnn-aarch64.c (ARCH_SIZE): New define.
(AARCH64_R, AARCH64_R_STR, LOG_FILE_ALIGN): New defines.
(GOT_ENTRY_SIZE): Re-define as (ARCH_SIZE / 8).
(elf64_aarch64_*): Rename to elfNN_aarch64_*.
(ELF64_R_*): Rename to ELFNN_R_*.
Plus other paramaterization.
* targets.c (bfd_elf32_bigaarch64_vec, bfd_elf32_littleaarch64_vec):
New declarations.
(_bfd_target_vector): Add bfd_elf32_bigaarch64_vec and
bfd_elf32_littleaarch64_vec.
gas/
* config/tc-aarch64.c (ilp32_p): New static variable.
(elf64_aarch64_target_format): Return the target according to the
value of 'ilp32_p'.
(md_begin): Determine 'mach' according to the value of 'ilp32_p'.
(aarch64_opts): Add support for options '-milp32' and '-mlp64'.
(aarch64_dwarf2_addr_size): New function.
* config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
(DWARF2_ADDR_SIZE): New define.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eaarch64elf32.c.
(eaarch64elf32.c): New dependency and rule.
* Makefile.in: Re-generated.
* configure.tgt (aarch64-*-elf): Add aarch64elf32.
(aarch64_be-*-elf, aarch64_be-*-linux*, aarch64-*-linux*): Likewise.
* emulparams/aarch64elf32.sh: New file.
* mips.h: Fix comment for "1": it is now STYPE rather than SHAMT.
Use "source" rather than "destination" for microMIPS "G".
gas/
* config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
* config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
so it skips whitespace before it.
(s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
gas/testsuite/
* gas/arm/macro-vld1.s: Add a case with whitespace before '}'.
* gas/arm/macro-vld1.d: Update.
* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Move MIPS ELF
files to...
(BFD64_BACKENDS, BFD64_BACKENDS_CFILES): ...here.
* Makefile.in: Regenerate.
* config.bfd: Enclose all MIPS ELF targets in #ifdef BFD64.
Set want64 to true for them at the end.
* targets.c (_bfd_target_vector): Protect MIPS ELF targets with
#ifdef BFD64.
gas/
* config/tc-mips.c: Assert that offsetT and valueT are at least
8 bytes in size.
(GPR_SMIN, GPR_SMAX): New macros.
(macro, mips_ip): Remove code for 4-byte valueT and offsetT.
ld/
* Makefile.am (ALL_EMULATION_SOURCES): Move MIPS ELF emulations to...
(ALL_64_EMULATION_SOURCES): ...here.
* Makefile.in: Regenerate.
* gas/mips/mips.exp: Remove "LOSE" comments.
(run_dump_test_arch): Remove format selector support.
(run_dump_test_arches): Remove associated upvars.
(elf, ecoff, aout, no_mips16, no_micromips): Remove variables.
Remove all conditions based on them, on the assumption that $elf
is true and the others are false. Rename "elf-jal" to "jal".
(tmips): Set to "t" for *bsd targets.
* gas/mips/elf-jal.d: Rename to...
* gas/mips/jal.d: ...this, replacing the old file.
* gas/mips/micromips@elf-jal.d: Rename to...
* gas/mips/micromips@jal.d: ...this.
* gas/mips/at-1.d, gas/mips/ld.d, gas/mips/l_d.d, gas/mips/lui.d,
gas/mips/mips1@l_d.d, gas/mips/mips1@ld-forward.d, gas/mips/mips1@ld.d,
gas/mips/mips1@s_d.d, gas/mips/s_d.d, gas/mips/sd.d: Remove ECOFF
relocation names. Do not allow any offset on the symbol.
* config/tc-mips.c: Remove OBJ_ELF, OBJ_MAYBE_ELF and IS_ELF
conditions. Remove any code deselected by them.
(s_mips_frame, s_mips_mask): Handle ECOFF_DEBUGGING case first.
* doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
Use "CPU" instead of "cpu".
* doc/c-mips.texi: Likewise.
(MIPS Opts): Rename to MIPS Options.
(MIPS option stack): Rename to MIPS Option Stack.
(MIPS ASE instruction generation overrides): Rename to
MIPS ASE Instruction Generation Overrides (for now).
(MIPS floating-point): Rename to MIPS Floating-Point.
* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
(ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
(ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
(ISA_SUPPORTS_VIRT64_ASE): Delete.
(mips_ase): New structure.
(mips_ases): New table.
(FP64_ASES): New macro.
(mips_ase_groups): New array.
(mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
(mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
functions.
(is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
(md_parse_option): Use mips_ases and mips_set_ase instead of
separate case statements for each ASE option.
(mips_after_parse_args): Use FP64_ASES. Use
mips_check_isa_supports_ases to check the ASEs against
other options.
(s_mipsset): Use mips_ases and mips_set_ase instead of
separate if statements for each ASE option. Use
mips_check_isa_supports_ases, even when a non-ASE option
is specified.
gas/testsuite/
* gas/mips/ase-errors-1.s, gas/mips/ase-errors-1.l,
gas/mips/ase-errors-2.s, gas/mips/ase-errors-2.l,
gas/mips/ase-errors-3.s, gas/mips/ase-errors-3.l,
gas/mips/ase-errors-4.s, gas/mips/ase-errors-4.l: New tests.
* gas/mips/mips.exp: Run them.
* config/tc-mips.c (mips_set_options): Replace separate "ase_*" fields
with a single "ase" bitmask.
(mips_opts): Update accordingly.
(file_ase, file_ase_explicit): New variables.
(file_ase_mips3d, file_ase_mdmx, file_ase_smartmips, file_ase_dsp)
(file_ase_dspr2, file_ase_eva, file_ase_mt, file_ase_virt): Delete.
(ISA_HAS_ROR): Adjust for mips_set_options change.
(is_opcode_valid): Take the base ase mask directly from mips_opts.
(mips_ip): Adjust for mips_set_options change.
(md_parse_option): Likewise. Update file_ase_explicit.
(mips_after_parse_args): Adjust for mips_set_options change.
Use bitmask operations to select the default ASEs. Set file_ase
rather than individual per-ASE variables.
(s_mipsset): Adjust for mips_set_options change.
(mips_elf_final_processing): Test file_ase rather than
file_ase_mdmx. Remove commented-out code.
* config/tc-mips.c (mips_cpu_info): Add an "ase" field.
(MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP, MIPS_CPU_ASE_MT)
(MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX, MIPS_CPU_ASE_DSPR2)
(MIPS_CPU_ASE_MCU, MIPS_CPU_ASE_VIRT, MIPS_CPU_ASE_EVA): Delete.
(mips_after_parse_args): Use the new "ase" field to choose
the default ASEs.
(mips_cpu_info_table): Move ASEs from the "flags" field to the
"ase" field.
* config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
* config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
function. Generates an error if the adjusted offset is out of a
16-bit range.
gas/
* config/tc-nios2.c (md_apply_fix): Mask constant
BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
gas/testsuite/
* gas/nios2/movia.s: Add additional test case with negative
constant value.
* gas/nios2/movia.d: Likewise.
* config/tc-mips.c (append_insn): Don't do branch relaxation for
MIPS-3D instructions either.
(md_convert_frag): Update the COPx branch mask accordingly.
* config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
option.
* doc/as.texinfo (Overview): Add --relax-branch and
--no-relax-branch.
* doc/c-mips.texi (MIPS Opts): Document --relax-branch and
--no-relax-branch.
gas/testsuite/
* gas/mips/relax-bc1any.l: New test.
* gas/mips/relax-bc1any.s: New test source.
* gas/mips/mips.exp: Run the new test.
2013-06-08 Catherine Moore <clm@codesourcery.com>
* config/tc-mips.c (is_opcode_valid): Build ASE mask.
(is_opcode_valid_16): Pass ase value to opcode_is_member.
(append_insn): Change INSN_xxxx to ASE_xxxx.
include/
2013-06-08 Catherine Moore <clm@codesourcery.com>
* opcode/mips.h (mips_opcode): Add ase field.
(INSN_ASE_MASK): Delete.
(INSN_DSP): Rename to ASE_DSP. Provide new value.
(INSN_DSPR2): Rename to ASE_DSPR2. Provide new value.
(INSN_MCU): Rename to ASE_MCU. Provide new value.
(INSN_MDMX): Rename to ASE_MDMX. Provide new value.
(INSN_MIPS3d): Rename to ASE_MIPS3D. Provide new value.
(INSN_MT): Rename to ASE_MT. Provide new value.
(INSN_SMARTMIPS): Rename to ASE_SMARTMIPS. Provide new value.
(INSN_VIRT): Rename to ASE_VIRT. Provide new value.
(INSN_VIRT64): Rename to ASE_VIRT64. Provide new value.
(opcode_is_member): Add ase argument. Check ase.
opcodes/
2013-06-08 Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* micromips-opc.c (D32, D33, MC): Update definitions.
(micromips_opcodes): Initialize ase field.
* mips-dis.c (mips_arch_choice): Add ase field.
(mips_arch_choices): Initialize ase field.
(set_default_mips_dis_options): Declare and setup mips_ase.
* mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
MT32, MC): Update definitions.
(mips_builtin_opcodes): Initialize ase field.
* write.c (resolve_reloc_expr_symbols): On REL targets don't
convert relocs who have no relocatable field either. Rephrase
the conditional so that the PC-relative check is only applied
for REL targets.
gas/testsuite/
* gas/mips/jalr3.d: New test.
* gas/mips/jalr3-n32.d: New test.
* gas/mips/jalr3-n64.d: New test.
* gas/mips/jalr3.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/jalr3.dd: New test.
* ld-mips-elf/jalr3.ld: New test linker script.
* ld-mips-elf/mips-elf.exp: Run the new test.
* config/tc-mips.c (macro) <ld>: Don't use $zero for address
calculation.
gas/testsuite/
* gas/mips/ld-zero.d: New test.
* gas/mips/ld-zero-2.d: New test.
* gas/mips/ld-zero-3.d: New test.
* gas/mips/ld-zero-q.d: New test.
* gas/mips/ld-zero-u.d: New test.
* gas/mips/ecoff@ld-zero-3.d: New test.
* gas/mips/micromips@ld-zero-2.d: New test.
* gas/mips/micromips@ld-zero-3.d: New test.
* gas/mips/ld-zero.s: New test source.
* gas/mips/ld-zero-2.s: New test source.
* gas/mips/ld-zero-3.s: New test source.
* gas/mips/ld-zero-q.s: New test source.
* gas/mips/ld-zero-u.s: New test source.
* gas/mips/mips.exp: Run the new tests.
2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (md_apply_fix): Move value range checking
inside fx_done condition.
2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
* gas/aarch64/adr_1.d: New file.
* gas/aarch64/adr_1.s: New file.
* gas/aarch64/b_1.d: New file.
* gas/aarch64/b_1.s: New file.
* gas/aarch64/beq_1.d: New file.
* gas/aarch64/beq_1.s: New file.
* gas/aarch64/ldr_1.d: New file.
* gas/aarch64/ldr_1.s: New file.
* gas/aarch64/tbz_1.d: New file.
* gas/aarch64/tbz_1.s: New file.
* s390-opc.txt (flogr): Require a register pair destination.
gas/testsuite/
* gas/s390/zarch-z9-109-err.s, gas/s390/zarch-z9-109-err.l: New test.
* gas/s390/s390.exp: Run it.
and data fixups performing shift/high adjust/sign extension on
fieldval. Sink fx_pcrel handling and checks. Use fixP->fx_size
when writing data fixups rather than recalculating size.
Add -mcpu command to specify core type.
* doc/c-msp430.c: Update documentation.
* gas/msp430/opcodes.s: Use correct value for .arch pseudo.
* gas/msp430/msp430x.d: Use correct value for -mcpu option.
* doc/binutils.texi: Document -Mvirt disassembler option.
gas/ChangeLog:
* config/tc-mips.c (struct mips_set_options): New ase_virt field.
(mips_opts): Update for the new field.
(file_ase_virt): New variable.
(ISA_SUPPORTS_VIRT_ASE): New macro.
(ISA_SUPPORTS_VIRT64_ASE): New macro.
(MIPS_CPU_ASE_VIRT): New define.
(is_opcode_valid): Handle ase_virt.
(macro_build): Handle "+J".
(validate_mips_insn): Likewise.
(mips_ip): Likewise.
(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
(md_longopts): Add mvirt and mnovirt
(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
(mips_after_parse_args): Handle ase_virt field.
(s_mipsset): Handle "virt" and "novirt".
(mips_elf_final_processing): Add a comment about virt ASE might need a new flag.
(md_show_usage): Print out the usage of -mvirt and mno-virt options.
* doc/c-mips.texi: Document -mvirt and -mno-virt.
Document ".set virt" and ".set novirt".
gas/testsuite/ChangeLog:
* gas/mips/mips.exp: Run virt and virt64 testcases.
* gas/mips/virt.d: New file.
* gas/mips/virt.s: New file.
* gas/mips/virt64.d: New file.
* gas/mips/virt64.s: New file.
include/opcode/ChangeLog:
* mips.h (OP_MASK_CODE10): Correct definition.
(OP_SH_CODE10): Likewise.
Add a comment that "+J" is used now for OP_*CODE10.
(INSN_ASE_MASK): Update.
(INSN_VIRT): New macro.
(INSN_VIRT64): New macro
opcodes/ChangeLog:
* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 .
Add INSN_VIRT and INSN_VIRT64 to mips64r2.
(parse_mips_dis_option): Handle the virt option.
(print_insn_args): Handle "+J".
(print_mips_disassembler_options): Print out message about virt64.
* mips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
Move rfe to the bottom as it conflicts with tlbgp.
(PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
(PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
(PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
(md_apply_fix): Set fx_no_overflow for assorted relocations.
Shift and sign-extend fieldval for use by some VLE reloc
operand->insert functions.
* config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
(s_mips_stab): Do not restrict to stabn only.
gas/testsuite/
* gas/mips/mips16-stabs.s, gas/mips/mips16-stabs.d: New test.
* gas/mips/mips.exp: Run it.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
according to the target parameter. Don't call s_segm since s_segm
calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
initialized yet.
(md_begin): Call s_segm according to target parameter from command
line.
gas/
* config/tc-nios2.c (nios2_control_register_arg_p): Rename
"fstatus" control register to "eccinj".
opcodes/
* nios2-opc.c (nios2_builtin_reg): Rename "fstatus" control register
to "eccinj".
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.
bfd/
* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
x86_64-*-elf*.
gas/testsuite/
* gas/i386/rex.d: Skip x86_64-*-elf*.
* gas/i386/ilp32/rex.d: Likewise.
ld/
* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
x86_64-*-elf*.
(targ_extra_libpath): Likewise.
(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
register being PC when is_t or writeback, and use distinct
diagnostic for the latter case.
gas/testsuite/
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/testsuite/gas/arm/ldst-pc.s: Add index, non-writeback
forms of various loads and stores with PC as base.
* gas/testsuite/gas/arm/ldst-pc.d: Update accordingly.
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (parse_operands): Re-write
po_barrier_or_imm().
(do_barrier): Remove bogus constraint().
(do_t_barrier): Remove.
gas/testsuite/
2013-04-10 Jan Beulich <jbeulich@suse.com>
* gas/arm/barrier-bad.d: Change title.
* gas/arm/barrier-bad.s: Add immediate form of ISB and DSB as
well as one symbolic form of DSB.
* gas/arm/barrier-bad.l: Update accordingly.
* gas/arm/barrier-bad-thumb.d: Adjust title. Use barrier-bad.s as
source. Pass -mthumb to gas.
* gas/arm/barrier-bad-thumb.l: Remove.
* gas/arm/barrier-bad-thumb.s: Remove.
* gas/arm/barrier-thumb.d: Adjust title. Use barrier.s as source.
Pass -mthumb to gas.
* gas/arm/barrier-thumb.s: Remove.
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_vmrs): Accept all control registers.
Use local variable Rt in more places.
(do_vmsr): Accept all control registers.
gas/testsuite/
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/arm/vfp1xD.s: Add VMRS/VMSR tests with FPINST, FPINST2,
and C15.
* gas/arm/vfp1xD.d: Update accordingly.
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
if there was none specified for moves between scalar and core
register.
gas/testsuite/
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/arm/neon-omit.s: Add tests for suffix less VMOV.
* gas/arm/neon-omit.d: Update accordingly.
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
NEON_ALL_LANES case.
gas/testsuite/
2013-04-09 Jan Beulich <jbeulich@suse.com>
* gas/arm/neon-addressing-bad.s: Add test for further invalid VST
operands.
* gas/arm/neon-addressing-bad.l: Update accordingly.
Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
* tic6x-opcode-table.h: Fix patterns for add, ldnw and xor.
* gas/tic6x/insns16-lsd-unit.s: Correct bit patterns for mvk, add
and xor.
* gas/tic6x/insns16-lsd-unit.d: Update expected output.
2013-03-26 Douglas B Rupp <rupp@gnat.com>
* config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
after fixup.
gas/testsuite/
2013-03-26 Douglas B Rupp <rupp@adacore.com
* gas/ia64/ia64.exp: Add new test reloc-mlx
* gas/ia64/reloc-mlx.[sd]: New test for X-unit reloc.
* gas/ia64/pcrel.d: Fix output for X-unit reloc.
2013-03-21 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
pc-relative str instructions in Thumb mode.
gas/testsuite/ChangeLog:
2013-03-21 Will Newton <will.newton@linaro.org>
* gas/arm/thumb2_relax.d: Strip out invalid pc-relative strs.
* gas/arm/thumb2_relax.s: Likewise.
* gas/arm/thumb32.d: Likewise.
* gas/arm/thumb32.l: Likewise.
* gas/arm/thumb32.s: Likewise.
* gas/arm/thumb2_str-bad.d: New file.
* gas/arm/thumb2_str-bad.l: Likewise.
* gas/arm/thumb2_str-bad.s: Likewise.
* tic6x-opcode-table.h: Rename mpydp's specific operand type macro
from ORREGD1324 to ORXREGD1324 and make it cross-path-able through
tic6x_operand_xregpair operand coding type.
Make mpydp instruction cross-path-able, ie: remove the FIXed 'x'
opcode field, usu ORXREGD1324 for the src2 operand and remove the
TIC6X_FLAG_NO_CROSS.
* gas/tic6x/insns-bad-1.s: Remove test-case for mpydp with
cross-path.
* gas/tic6x/insns-bad-1.l: Update expected output.
* gas/tic6x/insns-c674x.s: Add a test-case for mpydp with
cross-path.
* gas/tic6x/insns-c674x.d: Update expected output.
order to encode separately the msb and lsb of a register pair ; this will be
needed to encode the opcodes the same
way as Ti assembler does.
* gas/config/tc-tic6x.c: handle tic6x_coding_dreg_(msb|lsb) field coding types
and use it to encode register pair numbers when required.
* opcodes/tic6x-dis.c: decodes opcodes that have individual msb and lsb halves
in src1 & src2 fields ; discard the src1 (lsb) value and only use src2 (msb),
discarding bit 0, to follow what Ti SDK does in that case as any value in the
src1 field yields the same output with SDK disassembler.
* include/opcode/tic6x-opcode-table.h: modify absdp, dpint, dpsp, dptrunc,
rcpdp and rsqrdp opcodes to use the new field coding types.
* gas/testsuite/gas/tic6x/insns-c674x.d, gas/testsuite/gas/tic6x/insns-c674x.s
: add test case for the newly generated opcode but keep the old ones as they
seem legit as per Ti disassembler output.
