2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (INSN_TRAP): Rename to...
(INSN_NO_DELAY_SLOT): ... this.
(INSN_SYNC): Remove macro.
gas/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
as well as explicit checks for ERET and DERET when scheduling
branch delay slots.
opcodes/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(DSP_VOLA): Likewise.
(mips_builtin_opcodes): Add NODS annotation to "deret" and
"eret". Replace INSN_SYNC with NODS throughout. Use NODS in
place of TRAP for "wait", "waiti" and "yield".
* mips16-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
"restore" and "save".
* mips-opc.c (mips_builtin_opcodes): Correct register use
annotation of "alnv.ps".
gas/testsuite/
* gas/mips/alnv_ps-swap.d: New test for ALNV.PS instruction
branch swapping.
* gas/mips/alnv_ps-swap.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
2010-12-03 Mingming Sun <mingm.sun@gmail.com>
* mips-opc.c: (mips_builtin_opcodes): Add loongson3a mul/div and
fixed point instructions.
gas/testsuite/
2010-12-03 Mingming Sun <mingm.sun@gmail.com>
* gas/mips/loongson-3a.s, gas/mips/loongson-3a.d: New test.
* gas/mips/mips.exp: Run it.
* mips-opc.c (mips_builtin_opcodes): Move M_LD_OB and M_SD_OB
macros before their corresponding MIPS III hardware instructions.
gas/
* config/tc-mips.c (macro)[M_LD_OB, M_SD_OB]: Handle 64-bit ABIs.
gas/testsuite/
* gas/mips/lineno.s: Convert to o32.
* gas/mips/lineno.d: Adjust patterns accordingly. Force the o32
ABI.
* mips-opc.c (mips_builtin_opcodes): Add "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb".
gas/testsuite/
* gas/mips/mips32r2-sync.d: New test for MIPS32r2 "sync"
instruction variants.
* gas/mips/octeon@mips32r2-sync.d: Likewise, Octeon version.
* gas/mips/mips32r2-sync.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
David Ung <davidu@mips.com>
* mips-opc.c: Change membership to I1 for instructions ssnop and
ehb.
2010-05-26 Catherine Moore <clm@codesoucery.com>
Maxim Kuvyrkov <maxim@codesourcery.com>
* gas/mips/set-arch.d: Expect ehb.
* mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
dmfc2 and dmtc2 before the architecture-level variants.
gas/testsuite/
* gas/mips/octeon.s: Add more tests for dmfc2 and dmtc2.
* gas/mips/octeon.d: Update.
* gas/mips/octeon-ill.l: Update error message.
* mips-opc.c (synciobdma, syncs, syncw, syncws): Move these
before sync.
(sync): New instruction with 5-bit sync type.
* mips-dis.c (print_insn_args: Add case '1' to print 5-bit values.
(mips_builtin_opcodes): Mark c0, c2 and c3 as CP. Add Octeon to the
membership of di, dmfc0, dmtc0, ei, mfc0 and mtc0. Add dmfc2 and
dmtc2 Octeon instructions.
(OP_SH_SEQI, OP_MASK_SEQI): New bit mask and shift count for SEQI.
opcodes/
* mips-dis.c (print_insn_args): Handle field descriptor +Q.
* mips-opc.c (mips_builtin_opcodes): Add Octeon instructions seq,
seqi, sne and snei.
gas/
* config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
(mips_ip): Likewise.
(macro_build): Likewise.
(CPU_HAS_SEQ): New macro.
(macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
gas/testsuite/
* gas/mips/octeon.s, gas/mips/octeon.d: Add tests for seq* and sne*.
* gas/mips/octeon-ill.s, gas/mips/octeon-ill.s: Add tests for seqi
and snei.
instructions FP_S. Mark l.s, li.s, lwc1, swc1, s.s, trunc.w.s and
cop1 macros INSN2_M_FP_S. Mark l.d, li.d, ldc1 and sdc1 macros
INSN2_M_FP_D. Mark trunc.w.d macro INSN2_M_FP_S and INSN2_M_FP_D.
* mips.h (INSN_ISA*): Redefine certain values as an
enumeration. Update comments.
(mips_isa_table): New.
(ISA_MIPS*): Redefine to match enumeration.
(OPCODE_IS_MEMBER): Modify to correctly test new INSN_ISA*
values.
opcodes/
* mips-opc.c (I3_32, I3_33, I4_32, I4_33, I5_33): New.
(mips_builtin_opcodes): Use these new I* values.
2007-10-04 David Daney <ddaney@avtrex.com>
* mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S
registers.
gas/testsuite/
2007-10-04 David Daney <ddaney@avtrex.com>
* gas/mips/odd-float.d, gas/mips/odd-float.s: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
(mips_builtin_opcodes): Move "bc0f", "bc0fl", "bc0t", "bc0tl" to the
bottom to avoid opcode collision with "mftr" and "mttr".
Add MT instructions.
* mips-dis.c (mips_arch_choices): Enable INSN_MT for mips32r2.
(print_insn_args): Add supports for +t, +T, !, $, *, &, g operand
formats.
* mips-dis.c (no_aliases): New disassembly option flag.
(set_default_mips_dis_options): Init no_aliases to zero.
(parse_mips_dis_option): Handle no-aliases option.
(print_insn_mips): Ignore table entries that are aliases
if no_aliases is set.
(print_insn_mips16): Ditto.
* mips-opc.c (mips_builtin_opcodes): Add initializer column for
new pinfo2 member and add INSN_ALIAS initializers as needed. Also
move WR_MACC and RD_MACC initializers from pinfo to pinfo2.
* mips16-opc.c (mips16_opcodes): Ditto.
* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2
move/branch operations to the bottom so that VR5400 multimedia
instructions take precedence in disassembly.
gas/testsuite/
* gas/mips/vr5400.d: Update for a correct disassembly of
"racm.ob".
* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32
ISA-specific "break" encoding.
gas/testsuite/
* gas/mips/mips32.s: Adjust for the unified "break" syntax. Add
another "break" case. Update the comment accordingly.
* gas/mips/set-arch.s: Likewise.
* gas/mips/mips32.d: Adjust for the new output.
* gas/mips/set-arch.d: Likewise.
for loading addresses using CALL relocations.
Don't emit CALL relocations when a base register is used.
* gas/mips/lca-svr4pic.d: New test for the "lca" macro.
* gas/mips/lca-xgot.d: Likewise.
* gas/mips/lca.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB.
* mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and
"dlca".
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two
"dror" entries, and reorder the remaining "dror" and "ror" entries.
[ gas/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro): In M_DROL, M_DROR, M_ROL, and M_ROR,
use hardware rotate ops as appropriate. In M_DROL_I, M_DROR_I,
M_ROL_I, and M_ROR_I, simplify code, clean up warnings, and
arrange not to issue warnings about use of AT when AT is not
actually used.
[ gas/testsuite/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/rol.s: Add ".set noat" and some new instructions to test.
* gas/mips/rol64.s: Likewise.
* gas/mips/rol.l: New file.
* gas/mips/rol.d: Adjust to use rol.l and for rol.s changes.
* gas/mips/rol64.l: New file.
* gas/mips/rol64.d: Adjust to use rol64.l and for rol64.s changes.
* gas/mips/rol-hw.d: New file.
* gas/mips/rol-hw.l: New file.
* gas/mips/rol64-hw.d: New file.
* gas/mips/rol64-hw.l: New file.
* gas/mips/mips.exp: Run rol-hw and rol64-hw tests.
immediate offset in "dla" and "la" expansions.
* gas/mips/empic.d: Treat "addiu" and "daddiu" as equivalent when
$0 is source.
* mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as
aliases to "daddiu" and "addiu".
(mips_ip): Likewise.
* mips.h (INSN_MIPS16): New define.
* mips-dis.c (mips_isa_type): Add MIPS16 insn handling.
* mips-opc.c (I16): New define.
(mips_builtin_opcodes): Make jalx an I16 insn.
2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-opc.c: Add support for SB-1 MDMX subset and extensions.
[ gas/testsuite/ChangeLog ]
2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/sb1-ext-mdmx.s: New file.
* gas/mips/sb1-ext-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "sb1-ext-mdmx" test.
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mdmx" member.
(mips_opts): Initialize "ase_mdmx" member.
(file_ase_mdmx): New variable.
(CPU_HAS_MDMX): New macro.
(md_begin): Initialize mips_opts.ase_mdmx and file_ase_mdmx
based on command line options and configuration defaults.
(macro_build): Note in comment that use of MDMX in macros is
not currently allowed.
(validate_mips_insn): Add support for the "O", "Q", "X", "Y", and
"Z" MDMX operand types.
(mips_ip): Accept MDMX instructions if mips_opts.ase_mdmx is set,
and add support for the "O", "Q", "X", "Y", and "Z" MDMX operand
types.
(OPTION_MDMX, OPTION_NO_MDMX, md_longopts, md_parse_option):
Add support for "-mdmx" and "-no-mdmx" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mdmx" and ".set nomdmx".
(mips_elf_final_processing): Set MDMX ASE ELF header flag if
file_ase_mdmx was set.
* doc/as.texinfo: Document -mdmx and -no-mdmx options.
* doc/c-mips.texi: Likewise, and document ".set mdmx" and ".set
nomdmx" directives.
[ gas/testsuite/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mdmx.s: New file.
* gas/mips/mips64-mdmx.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mdmx" test.
[ include/opcode/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (OP_SH_ALN, OP_MASK_ALN, OP_SH_VSEL, OP_MASK_VSEL)
(MDMX_FMTSEL_IMM_QH, MDMX_FMTSEL_IMM_OB, MDMX_FMTSEL_VEC_QH)
(MDMX_FMTSEL_VEC_OB, INSN_READ_MDMX_ACC, INSN_WRITE_MDMX_ACC)
(INSN_MDMX): New constants, for MDMX support.
(opcode character list): Add "O", "Q", "X", "Y", and "Z" for MDMX.
[ opcodes/ChangeLog ]
2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
Ed Satterthwaite <ehs@broadcom.com>
* mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
and 'Z' formats, for MDMX.
(mips_isa_type): Add MDMX instructions to the ISA
bit mask for bfd_mach_mipsisa64.
* mips-opc.c: Add support for MDMX instructions.
(MX): New definition.
* mips-dis.c: Update copyright years to include 2002.
* mips-opc.c (M3D): Tweak comment.
(mips_builtin_op): Add comment indicating that opcodes of the
same name must be placed together in the table, and sort
the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
"rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
"bltzall" as writing GPR 31 (since they do).
* mips-dis.c (print_insn_arg): Calculate info->target
where appropriate.
(print_insn_mips): Fill in instruction info.
(print_mips16_insn_arg): Remove unneded variable 'val'.
Removed duplicated instruction target calculations,
calculate once and print that result. Use same idiom for
masking the jump segment bits as is used in print_insn_arg.
[gas/testsuite/ChangeLog]
2001-10-21 Chris Demetriou <cgd@broadcom.com>
* gas/mips/beq.s: Add zero words at end of instructions so
that objdump will print "..." when disassembling.
* gas/mips/beq.d: Update for disassembler changes which force
branch delay-slot nops to be printed.
* gas/mips/bge.d: Ditto.
* gas/mips/bgeu.d: Ditto.
* gas/mips/blt.d: Ditto.
* gas/mips/bltu.d: Ditto.
* gas/mips/jal-svr4pic.d: Ditto.
* gas/mips/jal-xgot.d: Ditto.
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (sb1-ext-ps): New test to test
SB-1 core's paired-single extensions to the MIPS64 ISA.
* gas/mips/sb1-ext-ps.d: New file.
* gas/mips/sb1-ext-ps.s: New file.
[include/opcode/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips.h (INSN_SB1): New cpu-specific instruction bit.
(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
if cpu is CPU_SB1.
[opcodes/ChangeLog]
2001-10-17 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
SB-1 binaries include instructions specific to the SB-1.
* mips-opc.c (SB1): New definition.
(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
"recip.ps", "rsqrt.ps", and "sqrt.ps".
* mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
force gp32 to zero.
* mips-opc.c (G6): New define.
(mips_builtin_op): Add "move" definition for -gp32.
