opcodes/
* nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.
gas/testsuite/
* gas/nios2/nios2.exp: Run registers.
* gas/nios2/registers.d: New file.
* gas/nios2/registers.s: Likewise.
* write.h (struct fix): Add fx_dot_frag field.
(dot_frag): Declare.
* write.c (dot_frag): New variable.
(fix_new_internal): Set fx_dot_frag field with dot_frag.
(fixup_segment): Base calculation of fx_offset with fx_dot_frag.
* expr.c (expr): Save value of frag_now in dot_frag when setting
dot_value.
* read.c (emit_expr): Likewise. Delete comments.
* config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
for system registers.
gas/testsuite/
* gas/aarch64/illegal.l: Delete the error message for
msr S3_1_C13_C15_1,x7.
* gas/aarch64/sysreg.s: Add new tests.
* gas/aarch64/sysreg.d: Update.
which also makes the disassembler output be in little
endian like it should be.
* metag/labelarithmetic.d: Fix the expected disassembler
output to be in little endian format
* metag/metacore12.d: likewise
* metag/metacore21.d: likewise
* metag/metacore21ext.d: likewise
* metag/metadsp21.d: likewise
* metag/metadsp21ext.d: likewise
* metag/metafpu.d: likewise
* metag/metafpuext.d: likewise
* metag/tls.d: likewise
* ld-metag/pcrel.d: Fix the expected disassembler
output to be in little endian format
* ld-metag/shared.d: likewise
* ld-metag/stub.d: likewise
* ld-metag/stub_pic_app.d: likewise
* ld-metag/stub_pic_shared.d: likewise
* ld-metag/stub_shared.d: likewise
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
(macro): Use it. Assert that trunc.w.s is not used for r5900.
opcodes/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
single-float. Disable ll, lld, sc and scd for EE. Disable the
trunc.w.s macro for EE.
gas/testsuite/
2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/24k-triple-stores-2.d, gas/mips/24k-triple-stores-2.s,
gas/mips/micromips@24k-triple-stores-2.d: Move "sc" tests to...
* gas/mips/24k-triple-stores-2-llsc.d,
gas/mips/24k-triple-stores-2-llsc.s,
gas/mips/micromips@24k-triple-stores-2-llsc.d: ...these new tests.
* gas/mips/r5900-full.d, gas/mips/r5900-full.s: Verify that the
MIPS ISA level can be upgraded to support ll, sc, lld and scd.
* gas/mips/l_d-single.d, gas/mips/s_d-single.d,
gas/mips/r5900-nollsc.l, gas/mips/r5900-nollsc.s: New tests.
* gas/mips/mips.exp: Update accordingly. Add "nollsc" to r5900
properties.
* config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
Don't skip fixups with fx_subsy non-NULL.
* config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
with fx_subsy non-NULL.
* tic6x-opcode-table.h: Fix encoding of BNOP instruction.
* gas/tic6x/insns-c674x-pcrel.s: Add test of BNOP instruction
within header based fetch packet.
* gas/tic6x/insns-c674x-pcrel.d: Update expected disassembly.
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64.h (aarch64_op): Remove OP_V_MOVI_B.
opcodes/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): For
AARCH64_MOD_LSL, move the range check on the shift amount before the
alignment check; change to call set_sft_amount_out_of_range_error
instead of set_imm_out_of_range_error.
* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
SIMD_IMM_SFT.
gas/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (output_operand_error_record): Change to output
the out-of-range error message as value-expected message if there is
only one single value in the expected range.
(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
LSL #0 as a programmer-friendly feature.
gas/testsuite/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/movi.s: Add tests.
* gas/aarch64/movi.d: Update.
* gas/aarch64/programmer-friendly.s: Add comment.
* metag.h: New file.
* dis-asm.h (print_insn_metag): New declaration.
* metag.h: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.in: Add Meta.
* disassemble.c: Add Meta support.
* metag-dis.c: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* archures.c (bfd_mach_metag): New.
* bfd-in2.h: Regenerate.
* config.bfd: Add Meta.
* configure: Regenerate.
* configure.in: Add Meta.
* cpu-metag.c: New file.
* elf-bfd.h: Add Meta.
* elf32-metag.c: New file.
* elf32-metag.h: New file.
* libbfd.h: Regenerate.
* reloc.c: Add Meta relocations.
* targets.c: Add Meta.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* config/tc-metag.c: New file.
* config/tc-metag.h: New file.
* configure.tgt: Add Meta.
* doc/Makefile.am: Add Meta.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add Meta.
* doc/as.texiinfo: Document Meta options.
* doc/c-metag.texi: New file.
* gas/metag/labelarithmetic.d: New file.
* gas/metag/labelarithmetic.s: New file.
* gas/metag/metacore12.d: New file.
* gas/metag/metacore12.s: New file.
* gas/metag/metacore21-invalid.l: New file.
* gas/metag/metacore21-invalid.s: New file.
* gas/metag/metacore21.d: New file.
* gas/metag/metacore21.s: New file.
* gas/metag/metacore21ext.d: New file.
* gas/metag/metacore21ext.s: New file.
* gas/metag/metadsp21-invalid.l: New file.
* gas/metag/metadsp21-invalid.s: New file.
* gas/metag/metadsp21.d: New file.
* gas/metag/metadsp21.s: New file.
* gas/metag/metadsp21ext.d: New file.
* gas/metag/metadsp21ext.s: New file.
* gas/metag/metafpu21.d: New file.
* gas/metag/metafpu21.s: New file.
* gas/metag/metafpu21ext.d: New file.
* gas/metag/metafpu21ext.s: New file.
* gas/metag/metag.exp: New file.
* gas/metag/tls.d: New file.
* gas/metag/tls.s: New file.
* Makefile.am: Add Meta.
* Makefile.in: Regenerate.
* configure.tgt: Add Meta.
* emulparams/elf32metag.sh: New file.
* emultempl/metagelf.em: New file.
* ld-elf/merge.d: Mark Meta as xfail.
* ld-gc/start.d: Skip this test on Meta.
* ld-gc/personality.d: Skip this test on Meta.
* ld-metag/external.s: New file.
* ld-metag/metag.exp: New file.
* ld-metag/pcrel.d: New file.
* ld-metag/pcrel.s: New file.
* ld-metag/shared.d: New file.
* ld-metag/shared.r: New file.
* ld-metag/shared.s: New file.
* ld-metag/stub.d: New file.
* ld-metag/stub.s: New file.
* ld-metag/stub_pic_app.d: New file.
* ld-metag/stub_pic_app.r: New file.
* ld-metag/stub_pic_app.s: New file.
* ld-metag/stub_pic_shared.d: New file.
* ld-metag/stub_pic_shared.s: New file.
* ld-metag/stub_shared.d: New file.
* ld-metag/stub_shared.r: New file.
* ld-metag/stub_shared.s: New file.
* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
(dump_relocations): Add EM_METAG.
(get_machine_name): Correct case for Meta.
(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
(is_none_reloc): Add support for Meta NONE reloc.
2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (parse_operands): Change to compare the result
of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
gas/testsuite/
2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.s: Add test.
* gas/aarch64/diagnostic.l: Update.
* config/tc-arm.c (skip_past_char): Skip whitespace before the
anticipated character.
* config/tc-arm.c (parse_address_main): Delete skip of whitespace
here as it is no longer needed.
PR gas/14887
* gas/arm/neon-ldst-es.s: Add more whitespace.
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
binutils/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright year to 2013.
gas/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2013.
ld/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2013.
opcodes/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright year to 2013.
2012-12-06 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (exp_has_bignum_p): Remove.
(my_get_expression): Not get rid of bignums.
(s_ltorg): Increase the range of 'align'.
(programmer_friendly_fixup): Allow bignum expression.
gas/testsuite/
2012-12-06 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/illegal.s: Add test for unaccepted LDR literal.
* gas/aarch64/illegal.l: Update.
* gas/aarch64/programmer-friendly.s: Add tests for LDR literal with
the auto-generation of literal in pool.
* gas/aarch64/programmer-friendly.d: Update.
* config/tc-arm.c (md_apply_fix): Fix conversion of BL to BLX for
local targets in Thumb mode.
gas/testsuite/
* gas/arm/bl-local-2.s: New test.
* gas/arm/bl-local-2.d: New.
* lib/binutils-common.exp (is_zlib_supported): New function.
* lib/utils-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* binutils-all/compress.exp: Bail out if zlib is not available.
* binutils-all/objdump.exp (objdump compressed debug):
Mark unsupported if zlib is not available.
* binutils-all/readelf.exp (readelf_compressed_wa_test): Likewise.
gas/testsuite/
* lib/gas-defs.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
ld/testsuite/
* ld-elf/compress.exp: Bail out if zlib is not supported.
* lib/ld-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* config/tc-arm.c (arm_symbol_chars): New variable.
* config/tc-arm.h (tc_symbol_chars): New macro, defined to that.
gas/testsuite/
* gas/arm/macro-pld.s: New file.
* gas/arm/macro-pld.d: New file.
* config/tc-ppc.c (md_apply_fix): Leave field zero when emitting
an ELF reloc on data as well.
gas/testsuite/ChangeLog:
* gas/ppc/astest.d: Update for fixup changes.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* config/obj-elf.h (obj_elf_vendor_attribute): ... here.
* read.c (potable): Remove "gnu_attribute".
(skip_whitespace, skip_past_char, skip_past_comma): Delete, move
to config/obj-elf.c.
(s_vendor_attribute): Delete, move to obj_elf_vendor_attribute
in config/obj-elf.c.
(s_gnu_attribute): Delete, move to obj_elf_gnu_attribute in
config/obj-elf.c.
* config/obj-elf.c (elf_pseudo_table): Add "gnu_attribute".
(skip_whitespace, skip_past_char, skip_past_comma): New, moved
from read.c.
(obj_elf_vendor_attribute): New, moved from s_vendor_attribute
in read.c.
(obj_elf_gnu_attribute): New, moved from s_gnu_attribute in
read.c.
* config/tc-arm.c (s_arm_eabi_attribute): Rename
s_vendor_attribute to obj_elf_vendor_attribute.
* config/tc-tic6x.c (s_tic6x_c6xabi_attribute): Likewise.
* elf32-rx.c (describe_flags): New function. Returns a buffer
containing a description of the E_FLAG_RX_... values set.
(rx_elf_merge_private_bfd_data): Use it.
(rx_elf_print_private_bfd_data): Likewise.
(elf32_rx_machine): Skip EF_RX_CPU_RX check.
(elf32_rx_special_sections): Define.
(elf_backend_special_sections): Define.
2012-11-09 Nick Clifton <nickc@redhat.com>
* readelf.c (get_machine_flags): Add support for E_FLAG_RX_ABI.
2012-11-09 Nick Clifton <nickc@redhat.com>
* config/obj-elf.c (obj_elf_change_section): Allow init array
sections to have the SHF_EXECINSTR attribute for the RX target.
* config/tc-rx.c (elf_flags): Initialise with E_FLAG_RX_ABI.
(enum options): Add OPTION_USES_GCC_ABI and OPTION_USES_RX_ABI.
(md_longopts): Add -mgcc-abi and -mrx-abi.
(md_parse_option): Add support for OPTION_USES_GCC_ABI and
OPTION_USES_RX_ABI.
* doc/as.texinfo (RX Options): Add mention of remaining RX
options.
* doc/c-rx.texi: Document -mgcc-abi and -mrx-abi.
2012-11-09 Nick Clifton <nickc@redhat.com>
* rx.h (EF_RX_CPU_RX): Add comment.
(E_FLAG_RX_ABI): Define.
2012-11-09 Nick Clifton <nickc@redhat.com>
* emultempl/rxelf.em (no_flag_mismatch_warnings): Initialise to
true.
(PARSE_AND_LIST_LONGOPTS): Add flag-mismatch-warnings.
(PARSE_AND_LIST_ARG_CASES): Add support for
--flag-mismatch-warnings.
* config/tc-mips.c (mips_ip) <'u'>: Default to BFD_RELOC_LO16.
gas/testsuite/
* gas/mips/lui.d: New test.
* gas/mips/micromips@lui.d: New test.
* gas/mips/lui-1.l: New list test.
* gas/mips/lui-2.l: New list test.
* gas/mips/lui.s: New test source.
* gas/mips/lui-1.s: New test source.
* gas/mips/lui-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
(ppc_setup_opcodes): Assert num_powerpc_operands fit.
(ppc_is_toc_sym): Move earlier in file.
(md_assemble): Move code setting reloc from md_apply_fix. Combine
non-ELF code setting fixup with ELF code. Stash opindex in
fx_pcrel_adjust. Adjust fixup offset for VLE. Don't set
fx_no_overflow here.
(md_apply_fix): Rewrite to use ppc_insert_operand for all
resolved instruction fields. Leave insn field zero when
emitting an ELF reloc in most cases.
* config/tc-mips.c (append_insn): Set fx_no_overflow for 16-bit
microMIPS branch relocations.
gas/testsuite/
* gas/mips/micromips-b16.d: New test.
* gas/mips/micromips-b16.s: New test source.
* gas/mips/mips.exp: Run the new test.
* config/tc-mips.c (is_delay_slot_valid): Don't accept macros
in 16-bit delay slots.
(macro_build_jalr): Emit 32-bit JALR if placed in a 32-bit delay
slot.
(macro) <M_JAL_2>: Likewise
gas/testsuite/
* gas/mips/micromips-branch-delay.l: Update messages for 16-bit
delay slot changes.
* gas/mips/micromips-warn-branch-delay.d: New test.
* gas/mips/micromips-warn-branch-delay.l: Stderr output for the
new test.
* gas/mips/micromips-warn-branch-delay-1.d: New test.
* gas/mips/micromips-warn-branch-delay.s: New test source.
* gas/mips/micromips-warn-branch-delay-1.s: New test source.
* gas/mips/mips.exp: Run the new tests.
* elf32-arm.c (elf32_arm_print_private_bfd_data): Recognise and
display the new ARM hard-float/soft-float ABI flags for EABI_VER5
(elf32_arm_post_process_headers): Add the hard-float/soft-float
ABI flag as appropriate for ET_DYN/ET_EXEC in EABI_VER5.
binutils:
* readelf.c (decode_ARM_machine_flags): Recognise and display the
new ARM hard-float/soft-float ABI flags for EABI_VER5. Split out
the code for EABI_VER4 and EABI_VER5 to allow this.
elfcpp:
* arm.h: New enum for EABI soft- and hard-float flags.
gold:
* gold.cc (Target_arm::do_adjust_elf_header): Add the
hard-float/soft-float ABI flag as appropriate for ET_DYN/ET_EXEC
in EABI_VER5.
include:
* elf/arm.h (EF_ARM_ABI_FLOAT_SOFT): New define.
(EF_ARM_ABI_FLOAT_HARD): Likewise.
ld/testsuite:
* ld-arm/eabi-hard-float.s: New test source.
* ld-arm/eabi-soft-float.s: New test source.
* ld-arm/eabi-hard-float.d: New test.
* ld-arm/eabi-soft-float.d: New test.
* ld-arm/eabi-soft-float-ABI4.d: New test.
* ld-arm/eabi-soft-float-r.d: New test.
* ld-arm/arm-elf.xp: Use the new tests.
binutils:
PR binutils/14779
* configure.in: Add checks for wchar.h and mbstate_t.
* config.in: Regenerate.
* configure: Regenerate.
* readelf.c: Conditionally include wchar.h.
(print_symbol): Conditionally use mbstate_t.
bfd/
* elf32-ppc.c (ppc_elf_reloc_type_lookup): Decode ppc64 _DS
bfd_reloc values. Map to corresponding D-form relocs.
(is_insn_ds_form, is_insn_qs_form): New functions.
(ppc_elf_relocate_section): Validate insn with DS-form or DQ-form
fields using D-form reloc.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Fix comment.
(md_assemble): Translate to _DS relocs for ppc32 as well as ppc64.
(tc_gen_reloc): Handle _DS relocs in ppc32 mode.
* gas/i386/rex.s: Add test of REX prefix before fsave (i.e. fwait).
* gas/i386/rex.d: Update.
opcodes/
* i386-dis.c (ckprefix): When bailing out for fwait with prefixes,
set rex_used to rex.
opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Change to check
the alignment of addr.offset.imm instead of that of shifter.amount for
operand type AARCH64_OPND_ADDR_UIMM12.
gas/testsuite/
* gas/aarch64/illegal-2.s: Add test case.
* gas/aarch64/illegal-2.l: Likewise.
* arm-dis.c: Use preferred form of vrint instruction variants
for disassembly.
2012-10-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* gas/arm/armv8-a+fp.d: Use preferred form of vrint instruction
variants for disassembly.
* gas/arm/armv8-a+fp.s: Likewise.
* gas/arm/armv8-a+simd.d: Likewise.
* gas/arm/armv8-a+simd.s: Likewise.
register operand of clr1, not1, set1 and tst1 instructions.
* config/tc-v850.c (v850_insert_operand): Use a static buffer for
the error message.
* gas/v850/v850e1.d: Fix expected disassembly of clr1, not1, set1
and tst1 insns.
* config/tc-s390.c (s390_parse_cpu): Add new option zEC12.
* doc/as.texinfo: Document new option zEC12.
* doc/c-s390.texi: Likewise.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/s390.exp: Run zEC12 tests.
* gas/s390/zarch-zEC12.d: New file.
* gas/s390/zarch-zEC12.s: New file.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-mkopc.c: Support new option zEC12.
* s390-opc.c: Add new instruction formats.
* s390-opc.txt: Add new instructions for zEC12.
2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_ZEC12.
2012-09-23 Maciej W. Rozycki <macro@codesourcery.com>
* gas/mips/hilo-diff-eb.d: New test.
* gas/mips/hilo-diff-eb-n32.d: New test.
* gas/mips/hilo-diff-eb-n64.d: New test.
* gas/mips/hilo-diff-el.d: New test.
* gas/mips/hilo-diff-el-n32.d: New test.
* gas/mips/hilo-diff-el-n64.d: New test.
* gas/mips/mips16@hilo-diff-eb.d: New test.
* gas/mips/mips16@hilo-diff-eb-n32.d: New test.
* gas/mips/mips16@hilo-diff-eb-n64.d: New test.
* gas/mips/mips16@hilo-diff-el.d: New test.
* gas/mips/mips16@hilo-diff-el-n32.d: New test.
* gas/mips/mips16@hilo-diff-el-n64.d: New test.
* gas/mips/micromips@hilo-diff-eb.d: New test.
* gas/mips/micromips@hilo-diff-eb-n32.d: New test.
* gas/mips/micromips@hilo-diff-eb-n64.d: New test.
* gas/mips/micromips@hilo-diff-el.d: New test.
* gas/mips/micromips@hilo-diff-el-n32.d: New test.
* gas/mips/micromips@hilo-diff-el-n64.d: New test.
* gas/mips/hilo-diff.s: New test source.
* gas/mips/mips.exp: Run the new tests.
* config/tc-mips.h (TC_FORCE_RELOCATION): Remove comment.
* config/tc-mips.c (calculate_reloc): New function.
(append_insn): Use it. Do not resolve compound relocations here.
(mips16_macro_build, mips16_ip): Use calculate_reloc.
(mips16_immed_extend): New function, split out from...
(mips16_immed): ...here.
(mips_frob_file): Handle null symbols.
(mips_force_relocation): Remove NEWABI handling.
(read_reloc_insn, write_reloc_insn): New functions.
(md_apply_fix): Report TLS relocations against constants.
Use read_reloc_insn, calculate_reloc and write_reloc_insn.
Report relocations against constants that can't be resolved
at assembly time.
gas/testsuite/
* gas/mips/elf-rel22.s, gas/mips/elf-rel22.d: Add more tests.
* gas/mips/elf-rel29.s, gas/mips/elf-rel29.d,
gas/mips/micromips@elf-rel29.d, gas/mips/elf-rel30.s,
gas/mips/elf-rel30.l: New tests.
* gas/mips/mips.exp: Run them.
2012-09-23 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (append_insn) <BFD_RELOC_MIPS_JMP>: Don't
mark as incomplete for constant expressions.
<BFD_RELOC_MIPS16_JMP>: Likewise.
2012-09-23 Richard Sandiford <rdsandiford@googlemail.com>
Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.h (mips_record_label): Delete.
(mips_add_dot_label): Declare.
(tc_new_dot_label): Use it.
* config/tc-mips.c (mips_assembling_insn): New variable.
(md_assemble): Call mips_mark_labels. Set mips_assembling_insn
while the main part of the function is executing.
(mips_compressed_mark_label): New function, split out from...
(mips_compressed_mark_labels): ...here.
(append_insn): Don't call mips_mark_labels here.
(mips_record_label): Make local.
(mips_add_dot_label): New function.
gas/testsuite/
* gas/mips/dot-1.s, gas/mips/dot-1.d, gas/mips/micromips@dot-1.d,
gas/mips/mips16@dot-1.d: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (SEXT_16BIT): New macro.
(mips16_immed): Take the reloc type as a parameter. Do not impose
a signed vs. unsigned distinction on the value when a relocation
operator was used.
(mips16_macro_build, mips16_ip, md_convert_frag): Pass the reloc
type to mips16_immed.
(macro): Use SEXT_16BIT.
* config/tc-mips.c (read_insn, write_insn, read_compressed_insn):
New functions.
(install_insn, md_apply_fix, md_convert_frag, mips_handle_align):
Use them, and write_compressed_insn.
* config/tc-mips.c (mips_cl_insn): Remove use_extend and extend.
(MIPS16_EXTEND): New macro.
(mips16_opcode_length): New function.
(insn_length): Use it.
(create_insn): Update after mips_cl_insn change.
(write_compressed_insn): New function.
(install_insn): Use it.
(append_insn): Use insn_length to check for unextended MIPS16
instructions.
(mips16_macro_build): Update call to mips16_immed.
(mips16_ip): Likewise. Use MIPS16_EXTEND to force an extended
instruction.
(mips16_immed): Remove use_extend and extend; install EXTEND
opcodes in the upper 16 bits of *INSN instead. Keep the
instruction extended if it already is. Replace warn, small
and ext with a forced_insn_length-like parameter.
(md_convert_frag): Update call mips16_immed.
Use write_compressed_insn.
opcodes:
* arm-dis.c: Changed ldra and strl-form mnemonics
to lda and stl-form.
gas:
* config/tc-arm.c: Changed ldra and strl-form mnemonics
to lda and stl-form for armv8.
gas/testsuite:
* gas/arm/armv8-a-bad.l: Updated for changed mnemonics.
* gas/arm/armv8-a-bad.s: Likewise.
* gas/arm/armv8-a.d: Likewise.
* gas/arm/armv8-a.s: Likewise.
* gas/arm/inst.s: Added test for ldrt encoding compatibly with ldralt.
* gas/arm/inst.d: Updated.
bfd/
* bfd-in2.h: Regenerated.
* elf64-aarch64.c
(elf64_aarch64_howto_table): Add R_AARCH64_GOT_LD_PREL19 reloc to HOWTO.
(elf64_aarch64_reloc_map): Add reloc entry.
(aarch64_resolve_relocation): Likewise.
(bfd_elf_aarch64_put_addend): Likewise.
(aarch64_reloc_got_type): Likewise.
(elf64_aarch64_final_link_relocate): Likewise.
(lf64_aarch64_check_relocs): Likewise.
(elf64_aarch64_check_relocs): New case for R_AARCH64_ADR_PREL_LO21
reloc.
* libbfd.h: Regenerated.
* reloc.c (R_AARCH64_GOT_LD_PREL19): New reloc.
gas/
* config/tc-aarch64.c
(reloc_table): Add reloc to table entry.
(parse_address_main): Add support for #:<reloc_op>:<symbol>.
(parse_operands): Check for unused reloc.
(md_apply_fix): New case for reloc.
(aarch64_force_relocation): Likewise.
gas/testsuite
* gas/aarch64/reloc-insn.d
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add expected asm for new reloc test.
* gas/aarch64/reloc-insn.s
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add test for reloc.
include/
* elf/aarch64.h (R_AARCH64_GOT_LD_PREL19): New reloc.
ld/testsuite
* ld-aarch64/aarch64-elf.exp: New reloc tests.
* ld-aarch64/emit-relocs-309-low-bad.d: New file. Expected asm for test
failure (lower bound overflow).
* ld-aarch64/emit-relocs-309-low.d: New file. Expected asm for test
success (lower bound).
* ld-aarch64/emit-relocs-309-up-bad.d: New file. Expected asm for test
failure (upper bound overflow).
* ld-aarch64/emit-relocs-309-up.d: New file. Expected asm for test
success (upper bound).
* ld-aarch64/emit-relocs-309.s: New file. Asm for new reloc tests.
* config/tc-s390.c (set_highgprs_p): New variable.
(s390_machinemode): New function.
(md_pseudo_table): Add new pseudo command machinemode.
(md_parse_option): Set set_highgprs_p to TRUE if -mzarch was
specified on command line.
(s390_elf_final_processing): Set the highgprs flag in the ELF
header depending on set_highgprs_p.
* doc/c-s390.texi: Document new pseudo machinemode.
bfd/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* cpu-ia64-opc.c (ins_cnt6a): New function.
(ext_cnt6a): Ditto.
(ins_strd5b): Ditto.
(ext_strd5b): Ditto.
(elf64_ia64_operands): Add new operand types.
gas/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* config/tc-ia64.c (reg_symbol): Add a new register.
(indirect_reg): Ditto.
(pseudo_func): Add new symbolic constants.
(operand_match): Add new operand types recognition.
(operand_insn): Add new register recognition.
(md_begin): Add new register definition.
(specify_resource): Add new register recognition.
gas/testsuite/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* gas/testsuite/gas/ia64/psn.d: New file.
* gas/testsuite/gas/ia64/psn.s: New file.
* gas/testsuite/gas/ia64/ia64.exp: Add new testcase.
* gas/testsuite/gas/ia64/opc-i.d: Fixed failing tests.
* gas/testsuite/gas/ia64/opc-m.d: Ditto.
include/opcode/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64.h (ia64_opnd): Add new operand types.
opcodes/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64-asmtab.h (completer_index): Extend bitfield to full uint.
* ia64-gen.c: Promote completer index type to longlong.
(irf_operand): Add new register recognition.
(in_iclass_mov_x): Add an entry for the new mov_* instruction type.
(lookup_specifier): Add new resource recognition.
(insert_bit_table_ent): Relax abort condition according to the
changed completer index type.
(print_dis_table): Fix printf format for completer index.
* ia64-ic.tbl: Add a new instruction class.
* ia64-opc-i.c (ia64_opcodes_i): Define new I-instructions.
* ia64-opc-m.c (ia64_opcodes_m): Define new M-instructions.
* ia64-opc.h: Define short names for new operand types.
* ia64-raw.tbl: Add new RAW resource for DAHR register.
* ia64-waw.tbl: Add new WAW resource for DAHR register.
* ia64-asmtab.c: Regenerate.
(CVT_VAR): New helper define.
(neon_cvt_flavour): New enumeration, function renamed...
(get_neon_cvt_flavour): ...to this.
(do_vfp_nsyn_cvt): Update to use new neon_cvt_flavour.
(do_vfp_nsyn_cvtz): Likewise.
(do_neon_cvt_1): Likewise.
(mark_feature_used): New function.
(parse_barrier): Check specified option is valid for the
specified architecture.
(UL_BARRIER): New macro.
(barrier_opt_names): Update for new barrier options.
* gas/testsuite/gas/arm/armv8-a-barrier.s: New testcase.
* gas/testsuite/gas/arm/armv8-a-barrier-arm.d: Likewise.
* gas/testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* opcodes/arm-dis.c (data_barrier_option): New function.
(print_insn_arm): Use data_barrier_option.
(print_insn_thumb32): Use data_barrier_option.
(mmix_greg_internal): Handle expressions not determinable at first
pass.
(s_loc): Ditto. Record expressions where the section isn't
determinable at the first pass, and assume they don't refer to
other sections.
(mmix_md_end): Verify that recorded LOC expressions weren't
to other sections, else emit error messages.
* gas/i386/prefetch.s: New file.
* gas/i386/prefetch.d: New file.
* gas/i386/prefetch-intel.d: New file.
* gas/i386/x86-64-prefetch.d: New file.
* gas/i386/x86-64-prefetch-intel.d: New file.
* gas/i386/i386.exp: Run them.
opcodes/
* i386-dis.c (reg_table): Fill out REG_0F0D table with
AMD-reserved cases as "prefetch".
(MOD_0F18_REG_4, MOD_0F18_REG_5): New enum constants.
(MOD_0F18_REG_6, MOD_0F18_REG_7): Likewise.
(reg_table): Use those under REG_0F18.
(mod_table): Add those cases as "nop/reserved".
prefixes for other than FS/GS in 64-bit mode. If doing so at all, it
should clearly do this correctly. Determining the default segment,
however, requires to take into consideration RegRex (so far, RSP, RBP,
R12, and R13 were all treated equally here).
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386-intel.c (build_modrm_byte): Split determining
default segment from figuring out encoding. Honor RegRex for
the former.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/x86-64-segovr.{s,l}: New.
* gas/i386/i386.exp: Run new test.
xmm/ymm registers are distinct. This patch adds code to check for this,
and at once eliminates a superfluous check for not using PC-relative
addressing for these instructions (the fact that an index register is
required here already excludes valid PC-relative addresses). The
severity of the resulting diagnostics can be controlled via command
line option or directive.
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (set_check): Renamed from set_sse_check.
Generalize to also handle operand checking option.
(enum i386_error): New enumerator 'invalid_vector_register_set'.
(match_template): Handle it.
(enum check_kind): Give it a tag. Drop sse_ prefixes from
enumerators.
(operand_check): New.
(md_pseudo_table): Add "operand_check".
(check_VecOperands): Don't special case RIP addressing. Check
that vSIB operands use distinct vector registers unless no
checking was requested.
(OPTION_MOPERAND_CHECK): New.
(md_parse_option): Handle it.
(OPTION_MAVXSCALAR, OPTION_X32): Adjust.
(md_longopts): Add "moperand-check".
(md_show_usage): Add help text for it.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/vgather-check-error.{s,l}: New.
* gas/i386/vgather-check-none.{s,d}: New.
* gas/i386/vgather-check-warn.{d,e}: New.
* gas/i386/vgather-check.{s,d}: New.
* gas/i386/x86-64-vgather-check-error.{s,l}: New.
* gas/i386/x86-64-vgather-check-none.{s,d}: New.
* gas/i386/x86-64-vgather-check-warn.{d,e}: New.
* gas/i386/x86-64-vgather-check.{s,d}: New.
* gas/i386/i386.exp: Run new tests.
got treated identically to the ones in the base range, due to not
paying attention to the fact that reg_entry's reg_num field doesn't
fully specify the register number (reg_flags also needs to be checked
for RegRex). This patch introduces and uses a new (inline) function to
obtain the full register number, and uses it to fix all those cases.
It additionally adds the missing operand checks for SVME instructions
(which match the monitor/mwait ones).
gas/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (register_number): New function.
(build_vex_prefix, process_immext, process_operands,
build_modrm_byte, i386_index_check): Use it.
gas/testsuite/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* gas/i386/x86-64-specific-reg.{s,l}: New.
* gas/i386/i386.exp: Run new test.
opcodes/
2012-08-07 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl: Remove "FIXME" comments from SVME instructions.
* config/tc-mips.c (append_insn): Also handle moving delay-slot
instruction across frags for fixed branches.
gas/testsuite/
* gas/mips/branch-swap-2.l: New list test.
* gas/mips/branch-swap-2.s: New test source.
* gas/mips/mips.exp: Run the new test.
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/dwarf2dbg.c (out_set_addr): Allow for non-constant value of
DWARF2_LINE_MIN_INSN_LENGTH
* gas/config/tc-ppc.c (ppc_dwarf2_line_min_insn_length): Declare
and initialize.
(md_apply_fix): Branch addr can be a multiple of 2 or 4.
* gas/config/tc-ppc.h (DWARF2_LINE_MIN_INSN_LENGTH): Now a
variable reference.
gas/testsuite/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* gas/cfi/cfi-ppc-1.d: Allow for code alignment of 2 or 4.
ld/ChangeLog:
2012-08-01 James Lemke <jwlemke@codesourcery.com>
* ld/testsuite/ld-gc/pr13683.d: XFAIL for powerpc*-*-eabivle.
and was pointing at the wrong operand in Intel mode. Since non-constant
operands are being taken care of by other means anyway, adjust it to
simply state that the constant doesn't fit.
2012-07-31 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_template): Adjust error message
for 'bad_imm4' case.
anyway, there's also no need to issue a separate, inconsistent
diagnostic in some of the cases - non-matching operands will be
complained about anyway.
2012-07-31 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (check_byte_reg): Check for I/O port
register earlier, and just once. Drop diagnostic that got
issued only for some registers.
all other instruction attributes already matched, so any mismatch here
will tell the user more precisely what is wrong than using an eventual
(and very likely to occur) more generic error encountered on a
subsequent iteration through the template matching loop.
2012-07-31 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_template): New local variable
'specific_error'. Set it from i.error after failed
check_VecOperands or VEX_check_operands. Use it if set in
preference to i.error when actually issuing disagnostic.