* configure.in: Add entry for mips-*-sysv4*MP*
* configure: Rebuild
* config/tc-mips.c (mips_target_format): Return elf32-tradbigmips or
elf32-tradlittlemips for traditional mips targets.
* config/tc-mips.c (md_estimate_size_before_relax): Duplicate the
test for Link Once sections as in adjust_reloc_syms.
* config/te-tmips.h: New file for traditional mips targets. Define
TE_TMIPS.
2000-06-24 Frank Ch. Eigler <fche@redhat.com>
* cgen.c (expr_jmp_buf_p): New validity flag for expr_jmp_buf.
(gas_cgen_parse_operand): Set it around expression() call.
(gas_cgen_md_operand): Test for it before longjmp().
is the integer register $r28, vs. both $r28 and the floating point
register $f28.
This quiets a bogus warning about needing ".set noat".
Approved by: Nick Clifton <nickc@cygnus.com>
Message-Id: <200006081749.KAA12558@elmo.cygnus.com>
* config/tc-ia64.c (generate_unwind_image): Call ia64_flush_insns.
(dot_endp): Don't call ia64_flush_insns.
(emit_one_bundle): Don't delete prologue/body records from
unwind_record list in first loop. Rewrite second loop to account for
this.
correctly.
mrs lr, spsr
The string pointer is advanced to far before the check to set
the SPSR bit.
Thu Jun 01 2000 Scott Bambrough <scottb@netwinder.org>
* config/tc-arm.c (do_mrs): Allow SPSR_BIT to be set correctly.
(s_desc): Add ATTRIBUTE_UNUSED to args as appropriate.
* read.h (aout_process_stab): Declare.
* configure.in (EMULATIONS) [i386aout, i386coff, i386elf]:
Generalize to *aout, *coff *elf.
* configure: Regenerated.
* doc/internals.texi (Object format backend): Say
SEPARATE_STAB_SECTIONS needs to be nonzero, not just defined.
* config/tc-ia64.c (output_P7_format, case mem_stack_f): Output fixed
frame size in units of 16 bytes, as required per SW Conventions manual.
(output_unw_records): Output info-block header as a dword to get
byte-order right.
More comments added.
(md_begin): Removed "construct symbols for each register name".
Because register names conflicts with GCC generated function
names.
(avr_operand): Now constant numbers can be used as a register
identifiers (0 as r0, 31 as r31).
(md_assemble): use skip_space () before parsing instruction
operands.
(md_assemble): Handle opcodes with optional operands (lpm,elpm).
(avr_operand): Handle 'a', 'v' and 'z' constraint letters needed
for `fmul', `movw' and `lpm R,Z' instructions.
(avr_operands): Warn if current opcode is a two-word instruction
and previous opcode was cpse/sbic/sbis/sbrc/sbrs.
(avr_opcodes): New commands added.
(REGISTER_P): Check 'a' and 'v' constraint letters.
(mcu_types): New MCU added.
bfd:
* Makefile.am (coff64-rs6000.lo): New rule.
* Makefile.in: Regenerate.
* coff-rs6000.c (xcoff_mkobject, xcoff_copy_private_bfd_data,
xcoff_is_local_label_name, xcoff_rtype2howto,
xcoff_reloc_type_lookup, xcoff_slurp_armap, xcoff_archive_p,
xcoff_read_ar_hdr, xcoff_openr_next_archived_file, xcoff_write_armap,
xcoff_write_archive_contents): No longer static, and prefix with _bfd_.
(NO_COFF_SYMBOLS): Define.
(xcoff64_swap_sym_in, xcoff64_swap_sym_out, xcoff64_swap_aux_in,
xcoff64_swap_aux_out): New functions; handle xcoff symbol tables
internally.
(MINUS_ONE): New macro.
(xcoff_howto_tabl, xcoff_reloc_type_lookup): Add 64 bit POS
relocation.
(coff_SWAP_sym_in, coff_SWAP_sym_out, coff_SWAP_aux_in,
coff_SWAP_aux_out): Map to the new functions.
* coff64-rs6000.c: New file.
* libcoff.h (bfd_coff_backend_data): Add new fields
_bfd_coff_force_symnames_in_strings and
_bfd_coff_debug_string_prefix_length.
(bfd_coff_force_symnames_in_strings,
bfd_coff_debug_string_prefix_length): New macros for above fields.
* coffcode.h (coff_set_arch_mach_hook): Handle XCOFF64 magic.
Set machine to 620 for XCOFF64. Use bfd_coff_swap_sym_in instead
of using coff_swap_sym_in directly.
(FORCE_SYMNAMES_IN_STRINGS): New macro, defined for XCOFF64.
(coff_set_flags) Set magic for XCOFF64.
(coff_compute_section_file_positions): Add symbol name length to
string section length if bfd_coff_debug_string_prefix_length is
true.
(coff_write_object_contents): Don't do reloc overflow for XCOFF64.
(coff_slurp_line_table): Use bfd_coff_swap_lineno_in instead of
using coff_swap_lineno_in directly.
(bfd_coff_backend_data): Add _bfd_coff_force_symnames_in_strings
and _bfd_coff_debug_string_prefix_length fields.
* coffgen.c (coff_fix_symbol_name, coff_write_symbols): Force
symbol names into strings table when
bfd_coff_force_symnames_in_strings is true.
* coffswap.h (MAX_SCNHDR_NRELOC, MAX_SCNHDR_NLNNO, GET_RELOC_VADDR,
SET_RELOC_VADDR): New macros.
(coff_swap_reloc_in, coff_swap_reloc_out): Use above macros.
(coff_swap_aux_in, coff_swap_aux_out): Remove RS6000COFF_C
code.
(coff_swap_aouthdr_in, coff_swap_aouthdr_out): Handle XCOFF64
changes within RS6000COFF_C specific code.
(coff_swap_scnhdr_out): Use PUT_SCNHDR_NLNNO, PUT_SCNHDR_NRELOC,
MAX_SCNHDR_NRELOC, and MAX_SCNHDR_NLNNO.
* reloc.c (bfd_perform_relocation, bfd_install_relocation):
Extend existing hack on target name.
* xcofflink.c (XCOFF_XVECP): Extend existing hack on
target name.
* coff-tic54x.c (ticof): Keep up to date with new fields
in bfd_coff_backend_data.
* config.bfd: Add bfd_powerpc_64_arch to targ_arch and define
targ_selvecs to include rs6000coff64_vec for rs6000.
* configure.in: Add rs6000coff64_vec case.
* cpu-powerpc.c: New bfd_arch_info_type.
gas:
* as.c (parse_args): Allow md_parse_option to override -a listing
option.
* config/obj-coff.c (add_lineno): Change type of offset parameter
from "int" to "bfd_vma."
* config/tc-ppc.c (md_pseudo_table): Add "llong" and "machine."
(ppc_mach, ppc_subseg_align, ppc_target_format): New.
(ppc_change_csect): Align correctly for XCOFF64.
(ppc_machine): New function, which discards "ppc_machine" line.
(ppc_tc): Cons for 8 when code is 64 bit.
(md_apply_fix3): Don't check operand->insert. Handle 64 bit
relocations.
(md_parse_option): Handle -a64 and -a32.
(ppc_xcoff64): New.
* config/tc-ppc.h (TARGET_MACH): Define.
(TARGET_FORMAT): Move to function.
(SUB_SEGMENT_ALIGN): Use ppc_subseg_align.
include:
* include/coff/rs6k64.h: New file.
opcodes:
* configure.in: Add bfd_powerpc_64_arch.
* disassemble.c (disassembler): Use print_insn_big_powerpc for
64 bit code.
Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it. Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.
* sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
stc GBR,@-<REG_N> is available for arch_sh1_up.
Group parallel processing insn with identical mnemonics together.
Make three-operand psha / pshl come first.
gas:
* config/tc-sh.c (get_operands): There's no third operand if the
first operand is an immediate.
opcodes:
* sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
(sh_arg_type): Add A_PC.
(sh_table): Update entries using immediates. Add repeat.
* sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
gas:
* config/tc-sh.c (immediate): Delete.
(sh_operand_info): Add immediate member.
(parse_reg): Use A_PC for pc.
(parse_exp): Add second argument 'op'. All callers changed.
(parse_at): Expect pc to be coded as A_PC.
Use immediate field in *op.
(insert): Add fourth argument 'op'. All callers changed.
(build_relax): Add second argument 'op'. All callers changed.
(insert_loop_bounds): New function.
(build_Mytes): Remove DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
(assemble_ppi): Use immediate field in *operand.
(sh_force_relocation): Handle BFD_RELOC_SH_LOOP_{START,END}.
(md_apply_fix): Likewise.
(tc_gen_reloc): Likewise. Check for a pcrel BFD_RELOC_SH_LABEL.
include/coff:
* sh.h (R_SH_LOOP_START, R_SH_LOOP_END): Define.
include/elf:
* sh.h (R_SH_LOOP_START, R_SH_LOOP_END): New RELOC_NUMBERs.
bfd:
* reloc.c (_bfd_relocate_contents): Add BFD_RELOC_SH_LOOP_START and
BFD_RELOC_SH_LOOP_END.
* elf32-sh.c (sh_elf_howto_tab): Change special_func to
sh_elf_ignore_reloc for all entries that sh_elf_reloc used to ignore.
Add entries for R_SH_LOOP_START and R_SH_LOOP_END.
(sh_elf_reloc_loop): New function.
(sh_elf_reloc): No need to test for always-to-be-ignored relocs
any more.
(sh_rel): Add entries for BFD_RELOC_SH_LOOP_{START,END}.
(sh_elf_relocate_section): Handle BFD_RELOC_SH_LOOP_{START,END}.
* bfd-in2.h, libbfd.h: Regenerate.
not supported by the current arch, only change the name if
its contents are the same as prev_name.
(get_specific): If the the architecture doesn't match, fail.
* elf32-mips.c (mips_elf_next_relocation): Rename from
mips_elf_next_lo16_relocation, and generalize to look
for any relocation type.
(elf_mips_howto_table): Make R_MIPS_PC16 pcrel_offset.
(elf_mips_gnu_rel_hi16): Howto for R_MIPS_GNU_REL_HI16.
(elf_mips_gnu_rel_lo16): Howto for R_MIPS_GNU_REL_LO16.
(elf_mips_gnu_rel16_s2): Howto for R_MIPS_GNU_REL16_S2.
(elf_mips_gnu_pcrel64): Howto for R_MIPS_PC64.
(elf_mips_gnu_pcrel32): Howto for R_MIPS_PC32.
(bfd_elf32_bfd_reloc_type_lookup): Add new relocs.
(mips_rtype_to_howto): Likewise.
(mips_elf_calculate_relocation): Handle new relocs.
(_bfd_mips_elf_relocate_section): REL_HI16/REL_LO16 relocs
are paired. The addend for R_MIPS_GNU_REL16_S2
is shifted right two bits.
In gas/:
* config/tc-mips.c (mips_ip): Don't put stuff in .rodata
when embedded-pic.
* config/tc-mips.c (SWITCH_TABLE): The ELF embedded-pic
implementation doesn't have special handling for switch
statements.
(macro_build): Allow for code in sections other than .text.
(macro): Likewise.
(mips_ip): Likewise.
(md_apply_fix): Do pc-relative relocation madness for MIPS ELF.
Don't perform relocs if we will be outputting them.
(tc_gen_reloc): For ELF, just use fx_addnumber for pc-relative
relocations. Allow BFD_RELOC_16_PCREL_S2 relocs when
embedded-pic.
In gas/testsuite/:
* gas/mips/empic.d: New file.
* gas/mips/empic.s: New file.
* gas/mips/mips16-e.d: New file.
* gas/mips/mips16-e.s: New file.
* gas/mips/mips16-f.d: New file.
* gas/mips/mips16-f.s: New file.
* gas/mips/mips.exp: Add empic, mips16-e. Add mips16-f as an
expected failure.
In include/elf:
* mips.h: Add R_MIPS_GNU_REL_HI16, R_MIPS_GNU_REL_LO16,
R_MIPS_GNU_REL16_S2, R_MIPS_PC64 and R_MIPS_PC32 relocation
numbers.
* doc/internals.texi (CPU backend): Mention that
line_separator_chars do not break up comments. Fix typos for
LEX_AT and LEX_NAME descriptions. Document operands for
TC_EQUAL_IN_INSN, md_operand and md_section_align. Correct
description of md_create_short_jump usage. Document argument for
md_undefined_symbol.
the errors exposed by this addition. These were intel mode
"fi... word ptr", "fi... dword ptr", "jmp Imm seg, Imm offset", "out dx,al".
The failure with intel "out dx,al" was also present in att "out al,dx".
Extend testsuite to catch this case too.
* config/tc-mips.c (mips_gp32): New variable.
(macro_build) Use mips_gp32.
(mips_ip): Ditto.
(md_longopts): Add "-mgp32" and "-mgp64".
(md_parse_option): Add OPTION_GP32 and OPTION_GP64.
Reinstate bits of sh4 support that got accidentally deleted.
Add sh-dsp support.
bfd:
* archures.c (bfd_mach_sh2, bfd_mach_sh_dsp): New macros.
(bfd_mach_sh3_dsp): Likewise.
(bfd_mach_sh4): Reinstate.
(bfd_default_scan): Recognize 7410, 7708, 7729 and 7750.
* bfd-in2.h: Regenerate.
* coff-sh.c (struct sh_opcode): flags is no longer short.
(USESAS, USESAS_REG, USESR8, SETSAS, SETSAS_REG): New macros.
(sh_opcode41, sh_opcode42): Integrate as sh_opcode41.
(sh_opcode01, sh_opcode02, sh_opcode40): Add sh-dsp opcodes.
(sh_opcode41, sh_opcode4, sh_opcode80): Likewise.
(sh_opcodes): No longer const.
(sh_dsp_opcodef0, sh_dsp_opcodef): New arrays.
(sh_insn_uses_reg): Check for USESAS and USESR8.
(sh_insn_sets_reg, sh_insns_conflict): Check for SETSAS.
(_bfd_sh_align_load_span): Return early for SH4.
Modify sh_opcodes lookup table for sh-dsp / sh3-dsp.
Take into account that field b of a parallel processing insn
could be mistaken for a separate insn.
* cpu-sh.c (arch_info_struct): New array elements for
sh2, sh-dsp and sh3-dsp.
Reinstate element for sh4.
(SH2_NEXT, SH_DSP_NEXT, SH3_DSP_NEXT): New macros.
(SH4_NEXT): Reinstate.
(SH3_NEXT, SH3E_NEXT): Adjust.
* elf-bfd.h (_sh_elf_set_mach_from_flags): Declare.
* elf32-sh.c (sh_elf_set_private_flags): New function.
(sh_elf_copy_private_data, sh_elf_set_mach_from_flags): Likewise.
(sh_elf_merge_private_data): New function.
(elf_backend_object_p, bfd_elf32_bfd_set_private_bfd_flags): Define.
(bfd_elf32_bfd_copy_private_bfd_data): Define.
(bfd_elf32_bfd_merge_private_bfd_data): Change to
sh_elf_merge_private_data.
gas:
* config/tc-sh.c ("elf/sh.h"): Include.
(sh_dsp, valid_arch, reg_x, reg_y, reg_efg): New static variables.
(md.begin): Initialize target_arch.
Only include opcodes in has table that match selected architecture.
(parse_reg): Recognize register names for sh-dsp.
(parse_at): Recognize post-modify addressing.
(get_operands): The leading space is now optional.
(get_specific): Remove FDREG_N support. Add support for sh-dsp
arguments. Update valid_arch.
(build_Mytes): Add support for SDT_REG_N.
(find_cooked_opcode): New function, broken out of md_assemble.
(assemble_ppi, sh_elf_final_processing): New functions.
(md_assemble): Use find_cooked_opcode and assemble_ppi.
(md_longopts, md_parse_option): New option: -dsp.
* config/tc-sh.h (elf_tc_final_processing): Define.
(sh_elf_final_processing): Declare.
include/elf:
* sh.h: (EF_SH_MACH_MASK, EF_SH_UNKNOWN, EF_SH1, EF_SH2): New macros.
(EF_SH3, EF_SH_HAS_DSP, EF_SH_DSP, EF_SH3_DSP): Likewise.
(EF_SH_HAS_FP, EF_SH3E, EF_SH4, EF_SH_MERGE_MACH): Likewise.
opcodes:
* sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
(print_insn_ppi): Likewise.
(print_insn_shx): Use info->mach to select appropriate insn set.
Add support for sh-dsp. Remove FD_REG_N support.
* sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
(sh_arg_type): Likewise. Remove FD_REG_N.
(sh_dsp_reg_nums): New enum.
(arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
(arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
(arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
(arch_sh3_dsp_up): Likewise.
(sh_opcode_info): New field: arch.
(sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
D_REG_N. Fill in arch field. Add sh-dsp insns.
already defined.
* config/tc-ppc.h [OBJ_XCOFF] (OBJ_COPY_SYMBOL_ATTRIBUTES):
New macro.
* config/tc-ppc.c (ppc_fix_adjustable): Don't look at the frag
of a symbol when we really care about its value.
assembler. ie. You will be able to do "as --em=i386aout" on an x86
linux-elf assembler to generate aout format object files, rather than
using a separate assembler. The aout emulation is enabled by giving
"--enable-targets=i386-linuxaout" to configure.
Oh yeah, there's a couple of fixes too. Error messages shouldn't be
passed to printf in the format arg just in case someone puts a `%' in
the message.
* gas/i386/general.{s,l}: Move 16 bit jmp and call tests from here
* gas/i386/jump16.{s,d}: To here.
* gas/i386/jump.{s,d}: New files. Duplicate 32 bit jmp and call
tests in general.s so that objdump is exercised.
* gas/i386/i386.exp: Call new tests.
if it is defined.
* config/obj-elf.c (elf_set_index): Add ATTRIBUTE_UNUSED.
* config/obj-elf.c (elf_frob_file_after_relocs): Don't pass NULL
to bfd_set_section_contents.
