(reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
(mips_frob_file): Rework so that only a single pass through the
relocs is needed. Allow %lo()s to have higher offsets than their
corresponding %hi()s or %got()s.
testsuite/
* gas/mips/elf{,el}-rel.d: Adjust so that the earliest %hi() matches
the earliest %lo().
* gas/mips/elf-rel11.d: Don't expect the relocs to be reordered.
* gas/mips/elf-rel20.[sd]: New test.
* gas/mips/mips.exp: Run it.
* i386.h (i386_optab): Remove fildd, fistpd and fisttpd.
opcodes/
* i386-dis.c (x_mode): Comment.
(two_source_ops): File scope.
(float_mem): Correct fisttpll and fistpll.
(float_mem_mode): New table.
(dofloat): Use it.
(OP_E): Correct intel mode PTR output.
(ptr_reg): Use open_char and close_char.
(PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for
operands. Set two_source_ops.
gas/testsuite/
* gas/i386/prescott.s: Remove fisttpd and fisttpq.
* gas/i386/prescott.d: Update.
* ia64-gen.c (in_iclass): Handle more postinc st
and ld variants.
* ia64-asmtab.c: Rebuilt.
gas/testsuite/
* gas/ia64/dv-raw-err.s: Add some new postinc tests.
* gas/ia64/dv-raw-err.l: Updated.
2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-elf.c (get_section): New function.
(obj_elf_change_section): Support multiple sections with same
name.
gas/testsuite/
2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
* gas/elf/elf.exp: Remove group1, add group1a and group1b for
section group.
* gas/elf/group1a.d: New file.
* gas/elf/group1b.d: Likewise.
* gas/elf/group1.e: Removed.
* elf32-sh.c (sh_elf_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
opcodes/
* sh-dis.c (print_insn_sh): Print the value in constant pool
as a symbol if it looks like a symbol.
gas/testsuite/
* gas/sh/pcrel2.d: Update.
* gas/sh/tlsd.d: Update.
* gas/sh/tlsnopic.d: Update.
* gas/sh/tlspic.d: Update.
ld/testsuite/
* ld-sh/tlsbin-1.d: Update
* ld-sh/tlspic-1.d: Update.
(load_address, macro): Use load_delay_nop() to build a nop
which can be omitted with gpr_interlocks.
* gas/mips/lb-xgot-ilocks.d: Remove nops in load delay slot.
* gas/mips/mips-abi32-pic.d: Likewise.
* gas/mips/mips-abi32-pic2.d: Likewise.
* gas/mips/mips-gp32-fp32-pic.d: Likewise.
* gas/mips/mips-gp32-fp64-pic.d: Likewise.
* gas/mips/mips-gp64-fp32-pic.d: Likewise.
* gas/mips/mips-gp64-fp64-pic.d: Likewise.
* gas/mips/relax-swap1-mips2.d: Likewise.
* gas/mips/lb-svr4pic-ilocks.d: New test.
* gas/mips/mips.exp: Run it.
(M, Mp): Use OP_M.
(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
(GRPPADLCK): Define.
(dis386): Use NOP_Fixup on "nop".
(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
(twobyte_has_modrm): Set for 0xa7.
(padlock_table): Delete. Move to..
(grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence
and clflush.
(print_insn): Revert PADLOCK_SPECIAL code.
(OP_E): Delete sfence, lfence, mfence checks.
* gas/i386/katmai.d: Revert last change.
* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
(OP_E): Twiddle clflush to sfence here.
gas/testsuite/
* gas/i386/katmai.d: Adjust for clflush change.
* dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
* read.h (SKIP_WHITESPACE): Turn into an expression.
* read.c (read_a_source_file): A pseudo is removed by having a
NULL handler.
testsuite:
* gas/macros/test2.s: Lowercase it.
* gas/mips/relax-swap1.s: Add extra space at end, so the
disassembly will consistently have "..." at its end.
* gas/mips/relax-swap2.s: Likewise.
* gas/mips/relax-swap1-mips2.d: Expect "..." at end of disassembly.
* config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
the first sequence, the size of the second sequence, and a flag
that says whether we should warn.
(RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
(RELAX_FIRST, RELAX_SECOND): New.
(mips_relax): New variable.
(relax_close_frag, relax_start, relax_switch, relax_end): New fns.
(append_insn): Remove "place" argument. Use mips_relax.sequence
rather than "place" to check whether we're expanding the second
alternative of a relaxable macro. Remove redundant check for
branch relaxation. If generating a normal insn, and there
is not enough room in the current frag, call relax_close_frag()
to close it. Update mips_relax.sizes[]. Emit fixups for the
second version of a relaxable macro. Record the first relaxable
fixup in mips_relax. Remove tc_gen_reloc workaround.
(macro_build): Remove all uses of "place". Use mips_relax.sequence
in the same way as in append_insn.
(mips16_macro_build): Remove "place" argument.
(macro_build_lui): As for macro_build. Don't drop the add_symbol
when generating the second version of a relaxable macro.
(load_got_offset, add_got_offset): New functions.
(load_address, macro): Use new relaxation machinery. Remove
tc_gen_reloc workarounds.
(md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
version of a relaxable macro is needed. Return -RELAX_SECOND if the
first version is needed.
(tc_gen_reloc): Remove relaxation handling.
(md_convert_frag): Go through the fixups for a relaxable macro and
mark those that belong to the unneeded alternative as done. If the
second alternative is needed, adjust the fixup addresses to account
for the deleted first alternative.
testsuite/
* gas/mips/elf-rel19.[sd]: New test.
* gas/mips/mips.exp: Run it.
* config/tc-mips.c (append_insn): Properly detect variant frags
that preclude swapping of relaxed branches. Correctly swap
instructions between frags when dealing with relaxed branches.
gas/testsuite/
* gas/mips/relax-swap1-mips1.d: New test for branch relaxation
with swapping for MIPS1.
* gas/mips/relax-swap1-mips2.d: New test for branch relaxation
with swapping for MIPS2.
* gas/mips/relax-swap1.l: Stderr output for the new tests.
* gas/mips/relax-swap1.s: Source for the new tests.
* gas/mips/relax-swap2.d: New test for branch likely relaxation
with swapping.
* gas/mips/relax-swap2.l: Stderr output for the new test.
* gas/mips/relax-swap2.s: Source for the new test.
* gas/mips/mips.exp: Run the new tests.
* config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
reloc, reserve space for the delay slot as well as the jalr itself.
gas/testsuite/
* gas/mips/elf-rel18.[sd]: New test.
* gas/mips/mips.exp: Run it.
* lib/gas-defs.exp (is_elf_format): Match frv-uclinux.
2003-09-18 Alexandre Oliva <aoliva@redhat.com>
* gas/frv/fdpic.s, gas/frv/fdpic.d: Renamed from ucpic*.
2003-09-15 Alexandre Oliva <aoliva@redhat.com>
* gas/frv/ucpic.s, gas/frv/ucpic.d: Use gr15 as PIC register. Use
gprel12 for rodata symbol and gotoff12 for sdata symbol.
2003-08-08 Alexandre Oliva <aoliva@redhat.com>
* gas/frv/ucpic.d: Test gotoff and gotofffuncdesc.
2003-08-04 Alexandre Oliva <aoliva@redhat.com>
* gas/frv/ucpic.d, gas/frv/ucpic.s: New.
* gas/frv/allinsns.exp: Run it.
* elf32-mips.c (elf_mips_howto_table_rel): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc. Use
_bfd_mips_elf_hi16_reloc for R_MIPS_HI16 and R_MIPS_GNU_REL_HI16,
_bfd_mips_elf_lo16_reloc for R_MIPS_LO16 and R_MIPS_GNU_REL_LO16,
and _bfd_mips_elf_got16_reloc for R_MIPS_GOT16. Change rightshift
to 16 for R_MIPS_HI16 and R_MIPS_GNU_REL_HI16.
(mips_elf_generic_reloc, struct mips_hi16, mips_elf_hi16_reloc)
(mips_elf_lo16_reloc, mips_elf_got16_reloc): Delete.
(_bfd_mips_elf32_gprel16_reloc): Remove special case.
(mips_elf_gprel32_reloc, mips32_64bit_reloc): Likewise.
* elf64-mips.c (mips_elf64_howto_table_rel): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc. Use
_bfd_mips_elf_hi16_reloc for R_MIPS_HI16, _bfd_mips_elf_lo16_reloc
for R_MIPS_LO16 and _bfd_mips_elf_got16_reloc for R_MIPS_GOT16.
Change R_MIPS_HI16's rightshift to 16.
(mips_elf64_howto_table_rela): Replace all uses of
mips_elf_generic_reloc with _bfd_mips_elf_generic_reloc.
Use _bfd_mips_elf_generic_reloc for R_MIPS_GOT16 as well.
(mips_elf64_hi16_reloc, mips_elf64_got16_reloc): Delete.
(mips_elf64_shift6_reloc): Remove special case. Use
_bfd_mips_elf_generic_reloc instead of returning bfd_reloc_continue.
* elfn32-mips.c (prev_reloc_section): Delete.
(prev_reloc_address, prev_reloc_addend): Delete.
(elf_mips_howto_table_rel, elf_mips_howto_table_rela): As for
elf64-mips.c
(GET_RELOC_ADDEND, SET_RELOC_ADDEND): Delete.
(mips_elf_generic_reloc, struct mips_hi16, mips_elf_hi16_reloc)
(mips_elf_lo16_reloc, mips_elf_got16_reloc): Delete.
(mips_elf_gprel16_reloc): Delete use of GET_RELOC_ADDEND.
(mips_elf_literal_reloc, mips_elf_gprel32_reloc): Likewise.
(mips16_jump_reloc, mips16_gprel_reloc): Likewise.
(mips_elf_shift6_reloc): Likewise. Delete use of SET_RELOC_ADDEND.
* elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Use
_bfd_relocate_contents to install an in-place addend.
(mips_hi16): New structure.
(mips_hi16_list): Moved from elf32-mips.c.
(_bfd_mips_elf_hi16_reloc, _bfd_mips_elf_got16_reloc): New functions.
(_bfd_mips_elf_lo16_reloc, _bfd_mips_elf_generic_reloc): New functions.
(mips_elf_calculate_relocation): Assume addend is unshifted.
(_bfd_mips_elf_relocate_section): Don't apply the howto rightshift
on top of the usual high-part shift. Don't shift the addend right
before calling mips_elf_calculate_relocation.
* elfxx-mips.h (_bfd_mips_elf_hi16_reloc): Declare.
(_bfd_mips_elf_got16_reloc, _bfd_mips_elf_lo16_reloc): Declare.
(_bfd_mips_elf_generic_reloc): Declare.
gas/
* config/tc-mips.c (mips_need_elf_addend_fixup): Delete.
(md_apply_fix3): Remove bfd_install_relocation workarounds.
(tc_gen_reloc): Likewise. Factor handling of pc-relative relocations
and treat fx_addnumber as relative to the relocation address.
gas/testsuite/
* gas/mips/mips16-jalx.d: Use -mabi=o64.
* gas/mips/mips16.d: Likewise.
* gas/mips/elf-rel17.[sd]: New test.
* gas/mips/mips.exp: Run it.
* ppc-opc.c (MO): Make optional.
(RAO, RSO, SHO): New optional forms of RA, RS, SH operands.
(tlbwe): Accept for both PPC403 and BOOKE. Make all operands optional.
gas:
* tc-ppc.c (md_assemble): Rewrite comment about optional operands
to indicate that 'all or none' is also handled. Pluralize a
word in another comment.
gas/testsuite:
* gas/ppc/booke.s: Add two more forms of the mbar instruction
and three forms of the tlbwe instruction.
* gas/ppc/booke.d: Update to match.
* config/tc-mips.c (macro): Switch misordered call to frag_grow()
and setting of tc_fr_offset.
gas/testsuite/
* gas/mips/elf-rel16.[sd]: New test.
* gas/mips/mips.exp: Run it.
* gas/mips/elf-rel-xgot-n32.d: Fix addends for "lw $5,dl1+34($5)".
* gas/mips/elf-rel-xgot-n64.d: Likewise.
dsp test for sh64/sh5 targets.
* gas/sh/sh64/crange1.s: Tidy up to match data alignment.
* gas/sh/sh64/crange1-1.d: Update.
* gas/sh/sh64/crange1-2.d: Likewise.
* gas/sh/sh64/datal32-3.d: Likewise.
* gas/sh/sh64/datal64-3.d: Likewise.
* gas/sh/sh64/localcom-1.d: Likewise.
for loading addresses using CALL relocations.
Don't emit CALL relocations when a base register is used.
* gas/mips/lca-svr4pic.d: New test for the "lca" macro.
* gas/mips/lca-xgot.d: Likewise.
* gas/mips/lca.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB.
* mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and
"dlca".
(rn_table, iwmmxt_table, cp_table, cn_table, fn_table, sn_table,
dn_table, mav_mvf_table, mac_mvd_table, mav_mvfx_table,
mav_mvax_table, mav_dspc_table): Initialise new field.
(insert_reg_alias): Initialise new field.
(md_pseudo_table): Add "unreq" entry.
(s_unreq): New function: Undo the effects of a previous .req.
* doc/c-arm.texi: Document new pseudo op.
* NEWS: Mention new feature.
* testsuite/gas/arm/req.s: New test file. Check .req and .unreq psuedo ops.
* testsuite/gas/arm/req.l: Expected error output from req.s test.
* testsuite/gas/arm/copro.d: Set target architecture for objdump so that the
test will work on architectures which cannot encode higher arm architecture
types in their file headers.
* testsuite/gas/arm/arm.exp: Run new req.s test.
Skip thumb instruction test for PE targets which do not support
thumb relocations.
* testsuite/gas/elf/elf.exp: Skip special handling of section2 test for XScale
targets - it is no longer needed.
2003-10-22 Andreas Schwab <schwab@suse.de>
H.J. Lu <hongjiu.lu@intel.com>
Jim Wilson <wilson@specifixinc.com>
* config/tc-ia64.c (update_qp_mutex): New.
(note_register_values): Properly handle one of PRs in compare
is PR0. Don't add a mutex relation for .and.orcm/.or.andcm.
Clear mutex relation for .none/.unc. Don't clear mutex relation
on predicated compare.
testsuite/
2003-10-22 Andreas Schwab <schwab@suse.de>
H.J. Lu <hongjiu.lu@intel.com>
* gas/ia64/dv-mutex-err.s: Add more tests for compare.
* gas/ia64/dv-mutex.s: Likewise.
* gas/ia64/dv-mutex-err.l: Updated.
* gas/ia64/dv-mutex.d: Likewise.
* lib/gas-defs.exp (gas_run): Always log the command being run.
(gas_start): Likewise.
(regexp_diff): Make error reporting about non-existent files
consistent.
* gas/z8k/calr-backf.s: New file.
* gas/z8k/calr-forwf.s: New file.
* gas/z8k/calr.d: New file.
* gas/z8k/calr.s: New file.
* gas/z8k/djnz-backf.s: New file.
* gas/z8k/djnz-backf2.s: New file.
* gas/z8k/djnz.d: New file.
* gas/z8k/djnz.s: New file.
* gas/z8k/jr-back.d: New file.
* gas/z8k/jr-forw.d: New file.
* gas/z8k/jr-back.s: Fix displacement length. Add some more jumps
for jr-back.d.
* gas/z8k/jr-backf.s: Fix displacement length.
* gas/z8k/jr-forw.s: Fix displacement length. Add some more jumps
for jr-forw.d.
* gas/z8k/jr-forwf.s: Fix displacement length.
* gas/z8k/z8k.exp: Run new tests.
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_ip): Capitalize first word of
existing condition code warning, and add condition code
warnings for .ps instructions, and for bc1any[24][tf].
[ gas/testsuite/ChangeLog ]
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* lib/gas-defs.exp (run_dump_test): If stderr file is specified
and there was no stderr output, compare anyway (i.e., cause a
test failure).
* gas/mips/mips64-mips3d.s: Add some new instructions to test warnings.
* gas/mips/mips64-mips3d.l: New file.
* gas/mips/mips64-mips3d.d: Use mips64-mips3d.l, and update for
changes to mips64-mips3d.s.
* gas/mips/mips64-mips3d-incl.d: Likewise.
* gas/mips/set-arch.l: New file.
* gas/mips/set-arch.d: Specify set-arch.l as stderr output to check.
* gas/mips/mips5.l: Make error messages match source.
(dot_cfi, output_cfi_insn): Handle DW_CFA_GNU_window_save.
(output_cie): Don't use DW_EH_PE_pcrel if neither DIFF_EXPR_OK
nor tc_cfi_emit_pcrel_expr are defined.
(output_fde): Use tc_cfi_emit_pcrel_expr if available and
DIFF_EXPR_OK is not defined.
* config/tc-sparc.h (TARGET_USE_CFIPOP): Define.
(tc_cfi_frame_initial_instructions, tc_regname_to_dw2regnum,
tc_cfi_emit_pcrel_expr): Define.
(sparc_cfi_frame_initial_instructions, sparc_regname_to_dw2regnum,
sparc_cfi_emit_pcrel_expr): New prototypes.
(sparc_cie_data_alignment): New decl.
(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Define.
* config/tc-sparc.c: Include dw2gencfi.h.
(sparc_cie_data_alignment): New variable.
(md_begin): Initialize it.
(sparc_cfi_frame_initial_instructions): New function.
(sparc_regname_to_dw2regnum): Likewise.
(sparc_cfi_emit_pcrel_expr): Likewise.
* doc/as.texinfo: Document .cfi_gnu_window_save.
* config/tc-sparc.c (s_common): Cast last argument to long and
change format string to shut up warning.
testsuite/
* gas/cfi/cfi-sparc-1.s: New test.
* gas/cfi/cfi-sparc-1.d: New test.
* gas/cfi/cfi-sparc64-1.s: New test.
* gas/cfi/cfi-sparc64-1.d: New test.
* gas/cfi/cfi.exp: Run them.
2003-08-16 Jason Eckhardt <jle@rice.edu>
* i860.h (fmov.ds): Expand as famov.ds.
(fmov.sd): Expand as famov.sd.
(pfmov.ds): Expand as pfamov.ds.
gas/testsuite/ChangeLog:
2003-08-16 Jason Eckhardt <jle@rice.edu>
* gas/i860/pseudo-ops01.{s,d}: New files.
* gas/i860/i860.exp: Execute the new test above.
* gas/i860/README.i860: Mention that pseudo-ops need more testing
and remove the align fill defect from the list.
2003-08-06 Jason Eckhardt <jle@rice.edu>
* config/tc-i860.c (i860_handle_align): New function.
* config/tc-i860.h (HANDLE_ALIGN): Define macro.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define macro.
gas/testsuite:
2003-08-06 Jason Eckhardt <jle@rice.edu>
* gas/i860/dir-align01.{s,d}: New files.
* gas/i860/i860.exp: Execute the new test above.
2003-08-06 Jason Eckhardt <jle@rice.edu>
* config/tc-i860.c (i860_process_insn): Check that instructions
with their dual-bit set are 8-byte aligned.
gas/testsuite:
2003-08-06 Jason Eckhardt <jle@rice.edu>
* gas/i860/dual02-err.l: Update expected error message.
* gas/i860/README.i860: Remove dual02-err from known failure list.
* gas/i860/dir-intel01.{s,d}: New files.
* gas/i860/dir-intel02.{s,d}: New files.
* gas/i860/dir-intel03-err.{s,l}: New files.
* gas/i860/i860.exp: Execute the above new tests.
* gas/i860/dual01.{s,d}: New files.
* gas/i860/dual02-err.{s,l}: New files.
* gas/i860/dual03.{s,d}: New files.
* gas/i860/i860.exp: Execute the above new tests.
* gas/i860/README.i860: Update.
* gas/m68hc11/abi.s: New test for abi elf flags.
* gas/m68hc11/abi-m68hc11-32-64.d: Test for 32-bit int, 64-bit float.
* gas/m68hc11/abi-m68hc11-16-64.d: Test for 16-bit int, 64-bit float.
* gas/m68hc11/abi-m68hc11-32-32.d: Test for 32-bit int, 32-bit float.
* gas/m68hc11/abi-m68hc11-16-32.d: Test for 16-bit int, 32-bit float.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
2003-07-08 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_validate_fix): Do not warn about branch
target being a global symbol if not compiling SVR4 PIC code.
[ gas/testsuite/ChangeLog ]
2003-07-08 Chris Demetriou <cgd@broadcom.com>
* gas/testsuite/gas/mips/mips.exp: Make sure that branch-misc-2 is
run to compile non-PIC code, and add branch-misc-2pic.
* gas/mips/branch-misc-2.l: Adjust for change in non-PIC warnings.
* gas/mips/branch-misc-2pic.l: New file.
* gas/mips/branch-misc-2pic.s: New file.
(DSYMMODE): Remove.
(parse_exp): Replace expressionS argument with a h8_op. Parse the
operand size as well.
(skip_colonthing): Remove unused expression argument. Tighten checks
for 2-digit sizes.
(colonmod24): Remove.
(get_mova_operands): Combine calls to parse_exp and skip_colonthing.
(get_operand): Likewise. Use the standard code to read the size of
pc-relative operands.
(fix_operand_size): Include the size-guessing logic that used to be
in colonmod24 and get_operand. Don't apply dd:2 optimizations to
offsets with a symbolic component.
testsuite/
* gas/h8300/h8sx_disp2.[sd]: Add tests for symbolic displacements.
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (md_assemble): Support Intel Precott New
Instructions.
* gas/config/tc-i386.h (CpuPNI): New.
(CpuUnknownFlags): Add CpuPNI.
gas/testsuite/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add prescott.
* gas/i386/prescott.d: New file.
* gas/i386/prescott.s: Likewise.
include/opcode/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Precott New Instructions.
opcodes/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in
Intel Precott New Instructions.
(PREGRP27): New. Added for "addsubpd" and "addsubps".
(PREGRP28): New. Added for "haddpd" and "haddps".
(PREGRP29): New. Added for "hsubpd" and "hsubps".
(PREGRP30): New. Added for "movsldup" and "movddup".
(PREGRP31): New. Added for "movshdup" and "movhpd".
(PREGRP32): New. Added for "lddqu".
(dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry.
Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for
entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for
entry 0xd0. Use PREGRP32 for entry 0xf0.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(grps): Use PNI_Fixup in the "sidtQ" entry.
(prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30,
PREGRP31 and PREGRP32.
(float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb.
Use "fisttpll" in entry 1 in opcode 0xdd.
Use "fisttp" in entry 1 in opcode 0xdf.
special handling for n32 ABI.
(macro): Likewise.
* gas/mips/elf-rel-got-n32.d: Remove special handling for n32 ABI.
* gas/mips/elf-rel-xgot-n32.d: Likewise.
* gas/mips/jal-newabi.d: Likewise.
* ld-mips-elf/elf-rel-got-n32.d: Remove special handling for n32 ABI.
* ld-mips-elf/elf-rel-xgot-n32.d: Likewise.
* gas/z8k/dec.s: New file.
* gas/z8k/decbf.s: New file.
* gas/z8k/decf.s: New file.
* gas/z8k/eidi.s: New file.
* gas/z8k/eidif.s: New file.
* gas/z8k/inc.s: New file.
* gas/z8k/incbf.s: New file.
* gas/z8k/incf.s: New file.
* gas/z8k/inout.d: New file.
* gas/z8k/inout.s: New file.
* gas/z8k/jr-back.s: New file.
* gas/z8k/jr-backf.s: New file.
* gas/z8k/jr-forw.s: New file.
* gas/z8k/jr-forwf.s: New file.
* gas/z8k/ldk.s: New file.
* gas/z8k/ldkf.s: New file.
* gas/z8k/z8k.exp: New file.
(output_cie): Don't pad.
(output_fde): Add align argument. Pad to align if not 0.
(cfi_finish): Set .eh_frame alignment to EH_FRAME_ALIGNMENT.
Pad just last FDE to EH_FRAME_ALIGNMENT.
* gas/cfi/cfi-i386.d: Regenerated.
* gas/cfi/cfi-common-1.d: Regenerated.
* gas/cfi/cfi-common-2.d: Regenerated.
* gas/cfi/cfi-common-3.d: Regenerated.
* gas/cfi/cfi-x86_64.d: Regenerated.
* gas/cfi/cfi-alpha-1.d: Regenerated.
* gas/cfi/cfi-alpha-2.d: Regenerated.
* gas/cfi/cfi-alpha-3.d: Regenerated.
* gas/mips/elempic.d: Force o64 ABI.
* gas/mips/telempic.d: Likewise.
* ld-mips-elf/rel32-n32.d: Force big endian assembly.
* ld-mips-elf/rel32-o32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
* h8300.h (IMM4_NS, IMM8_NS): New.
(h8_opcodes): Replace IMM4 with IMM4_NS in mov.b and mov.w entries.
Likewise IMM8 for mov.w and mov.l. Likewise IMM16U for mov.l.
gas/testsuite
* gas/h8300/h8sx_mov_imm.[sd]: New test.
* gas/h8300/h8300.exp: Run it.
* gas/h8300/t01_mov.s: New file, tests mov instructions.
* gas/h8300/t02_mova.s: New file, tests mova instructions.
* gas/h8300/t03_add.s: New file, tests add instructions.
* gas/h8300/t04_sub.s: New file, tests sub instructions.
* gas/h8300/t05_cmp.s: New file, tests cmp instructions.
* gas/h8300/t06_ari2.s: New file, tests arithmetic instructions.
* gas/h8300/t07_ari3.s: New file, tests arithmetic instructions.
* gas/h8300/t08_or.s: New file, tests or instructions.
* gas/h8300/t09_xor.s: New file, tests xor instructions.
* gas/h8300/t10_and.s: New file, tests and instructions.
* gas/h8300/t11_logs.s: New file, tests logical instructions.
* gas/h8300/t12_bit.s: New file, tests bit instructions.
* gas/h8300/t13_otr.s.s: New file, tests misc. instructions.
* gas/h8300/t01_mov.exp: New file.
* gas/h8300/t02_mova.exp: New file.
* gas/h8300/t03_add.exp: New file.
* gas/h8300/t04_sub.exp: New file.
* gas/h8300/t05_cmp.exp: New file.
* gas/h8300/t06_ari2.exp: New file.
* gas/h8300/t07_ari3.exp: New file.
* gas/h8300/t08_or.exp: New file.
* gas/h8300/t09_xor.exp: New file.
* gas/h8300/t10_and.exp: New file.
* gas/h8300/t11_logs.exp: New file.
* gas/h8300/t12_bit.exp: New file.
* gas/h8300/t13_otr.exp: New file.
* gas/i860/bitwise.{s,d}: New files.
* gas/i860/bte.{s,d}: New files.
* gas/i860/fldst01.{s,d}: New files.
* gas/i860/fldst02.{s,d}: New files.
* gas/i860/fldst03.{s,d}: New files.
* gas/i860/fldst04.{s,d}: New files.
* gas/i860/fldst05.{s,d}: New files.
* gas/i860/fldst06.{s,d}: New files.
* gas/i860/fldst07.{s,d}: New files.
* gas/i860/fldst08.{s,d}: New files.
* gas/i860/float01.{s,d}: New files.
* gas/i860/float02.{s,d}: New files.
* gas/i860/float03.{s,d}: New files.
* gas/i860/float04.{s,d}: New files.
* gas/i860/form.{s,d}: New files.
* gas/i860/iarith.{s,d}: New files.
* gas/i860/ldst01.{s,d}: New files.
* gas/i860/ldst02.{s,d}: New files.
* gas/i860/ldst03.{s,d}: New files.
* gas/i860/ldst04.{s,d}: New files.
* gas/i860/ldst05.{s,d}: New files.
* gas/i860/ldst06.{s,d}: New files.
* gas/i860/pfam.{s,d}: New files.
* gas/i860/pfmam.{s,d}: New files.
* gas/i860/pfmsm.{s,d}: New files.
* gas/i860/pfsm.{s,d}: New files.
* gas/i860/regress01.{s,d}: New files.
* gas/i860/shift.{s,d}: New files.
* gas/i860/simd.{s,d}: New files.
2003-05-03 H.J. Lu <hjl@gnu.org>
* config/obj-elf.c (obj_elf_parse_section_letters): Make it a
fatal error for unknown section attribute.
* config/tc-alpha.c (alpha_elf_section_letter): Return -1 for
unknown section attribute.
* config/tc-ia64.c (ia64_elf_section_letter): Likewise.
* config/tc-ppc.c (ppc_section_letter): Likewise.
* config/tc-ia64.c (ia64_elf_section_letter): Handle 'o'.
(ia64_elf_section_type): Accept "unwind".
gas/testsuite/
2003-05-03 H.J. Lu <hjl@gnu.org>
* gas/ia64/ia64.exp: Add unwind.
* gas/ia64/unwind.s: New. Test the new section attribute 'o'
and the new section type "unwind".
* gas/ia64/unwind.d: Likewise.
