* config/tc-mips.c (macro): Switch misordered call to frag_grow()
and setting of tc_fr_offset.
gas/testsuite/
* gas/mips/elf-rel16.[sd]: New test.
* gas/mips/mips.exp: Run it.
* gas/mips/elf-rel-xgot-n32.d: Fix addends for "lw $5,dl1+34($5)".
* gas/mips/elf-rel-xgot-n64.d: Likewise.
* config/tc-sh.c: Add support for sh4a and no-fpu variants,
with appropriate additions to md_show_usage.
* testsuite/gas/sh/basic.exp: Call tests for sh4a.
* testsuite/gas/sh/{err-sh4a-fp.s, err-sh4a.s,
err-sh4al-dsp.s, sh4a-dsp.d, sh4a-dsp.s, sh4a-fp.d,
sh4a-fp.s, sh4a.d, sh4a.s, sh4al-dsp.d, sh4al-dsp.s:
New files, tests for sh4a and related variants.
* doc/c-sh.texi: Document new -isa options.
* doc/c-sh64.texi: Ditto.
* NEWS: Mention new support for sh4a.
dsp test for sh64/sh5 targets.
* gas/sh/sh64/crange1.s: Tidy up to match data alignment.
* gas/sh/sh64/crange1-1.d: Update.
* gas/sh/sh64/crange1-2.d: Likewise.
* gas/sh/sh64/datal32-3.d: Likewise.
* gas/sh/sh64/datal64-3.d: Likewise.
* gas/sh/sh64/localcom-1.d: Likewise.
for loading addresses using CALL relocations.
Don't emit CALL relocations when a base register is used.
* gas/mips/lca-svr4pic.d: New test for the "lca" macro.
* gas/mips/lca-xgot.d: Likewise.
* gas/mips/lca.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h: Define new enum members, M_LCA_AB and M_DLCA_AB.
* mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and
"dlca".
(rn_table, iwmmxt_table, cp_table, cn_table, fn_table, sn_table,
dn_table, mav_mvf_table, mac_mvd_table, mav_mvfx_table,
mav_mvax_table, mav_dspc_table): Initialise new field.
(insert_reg_alias): Initialise new field.
(md_pseudo_table): Add "unreq" entry.
(s_unreq): New function: Undo the effects of a previous .req.
* doc/c-arm.texi: Document new pseudo op.
* NEWS: Mention new feature.
* testsuite/gas/arm/req.s: New test file. Check .req and .unreq psuedo ops.
* testsuite/gas/arm/req.l: Expected error output from req.s test.
* testsuite/gas/arm/copro.d: Set target architecture for objdump so that the
test will work on architectures which cannot encode higher arm architecture
types in their file headers.
* testsuite/gas/arm/arm.exp: Run new req.s test.
Skip thumb instruction test for PE targets which do not support
thumb relocations.
* testsuite/gas/elf/elf.exp: Skip special handling of section2 test for XScale
targets - it is no longer needed.
2003-10-22 Andreas Schwab <schwab@suse.de>
H.J. Lu <hongjiu.lu@intel.com>
Jim Wilson <wilson@specifixinc.com>
* config/tc-ia64.c (update_qp_mutex): New.
(note_register_values): Properly handle one of PRs in compare
is PR0. Don't add a mutex relation for .and.orcm/.or.andcm.
Clear mutex relation for .none/.unc. Don't clear mutex relation
on predicated compare.
testsuite/
2003-10-22 Andreas Schwab <schwab@suse.de>
H.J. Lu <hongjiu.lu@intel.com>
* gas/ia64/dv-mutex-err.s: Add more tests for compare.
* gas/ia64/dv-mutex.s: Likewise.
* gas/ia64/dv-mutex-err.l: Updated.
* gas/ia64/dv-mutex.d: Likewise.
* lib/gas-defs.exp (gas_run): Always log the command being run.
(gas_start): Likewise.
(regexp_diff): Make error reporting about non-existent files
consistent.
* gas/z8k/calr-backf.s: New file.
* gas/z8k/calr-forwf.s: New file.
* gas/z8k/calr.d: New file.
* gas/z8k/calr.s: New file.
* gas/z8k/djnz-backf.s: New file.
* gas/z8k/djnz-backf2.s: New file.
* gas/z8k/djnz.d: New file.
* gas/z8k/djnz.s: New file.
* gas/z8k/jr-back.d: New file.
* gas/z8k/jr-forw.d: New file.
* gas/z8k/jr-back.s: Fix displacement length. Add some more jumps
for jr-back.d.
* gas/z8k/jr-backf.s: Fix displacement length.
* gas/z8k/jr-forw.s: Fix displacement length. Add some more jumps
for jr-forw.d.
* gas/z8k/jr-forwf.s: Fix displacement length.
* gas/z8k/z8k.exp: Run new tests.
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_ip): Capitalize first word of
existing condition code warning, and add condition code
warnings for .ps instructions, and for bc1any[24][tf].
[ gas/testsuite/ChangeLog ]
2003-09-30 Chris Demetriou <cgd@broadcom.com>
* lib/gas-defs.exp (run_dump_test): If stderr file is specified
and there was no stderr output, compare anyway (i.e., cause a
test failure).
* gas/mips/mips64-mips3d.s: Add some new instructions to test warnings.
* gas/mips/mips64-mips3d.l: New file.
* gas/mips/mips64-mips3d.d: Use mips64-mips3d.l, and update for
changes to mips64-mips3d.s.
* gas/mips/mips64-mips3d-incl.d: Likewise.
* gas/mips/set-arch.l: New file.
* gas/mips/set-arch.d: Specify set-arch.l as stderr output to check.
* gas/mips/mips5.l: Make error messages match source.
(dot_cfi, output_cfi_insn): Handle DW_CFA_GNU_window_save.
(output_cie): Don't use DW_EH_PE_pcrel if neither DIFF_EXPR_OK
nor tc_cfi_emit_pcrel_expr are defined.
(output_fde): Use tc_cfi_emit_pcrel_expr if available and
DIFF_EXPR_OK is not defined.
* config/tc-sparc.h (TARGET_USE_CFIPOP): Define.
(tc_cfi_frame_initial_instructions, tc_regname_to_dw2regnum,
tc_cfi_emit_pcrel_expr): Define.
(sparc_cfi_frame_initial_instructions, sparc_regname_to_dw2regnum,
sparc_cfi_emit_pcrel_expr): New prototypes.
(sparc_cie_data_alignment): New decl.
(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Define.
* config/tc-sparc.c: Include dw2gencfi.h.
(sparc_cie_data_alignment): New variable.
(md_begin): Initialize it.
(sparc_cfi_frame_initial_instructions): New function.
(sparc_regname_to_dw2regnum): Likewise.
(sparc_cfi_emit_pcrel_expr): Likewise.
* doc/as.texinfo: Document .cfi_gnu_window_save.
* config/tc-sparc.c (s_common): Cast last argument to long and
change format string to shut up warning.
testsuite/
* gas/cfi/cfi-sparc-1.s: New test.
* gas/cfi/cfi-sparc-1.d: New test.
* gas/cfi/cfi-sparc64-1.s: New test.
* gas/cfi/cfi-sparc64-1.d: New test.
* gas/cfi/cfi.exp: Run them.
2003-08-16 Jason Eckhardt <jle@rice.edu>
* i860.h (fmov.ds): Expand as famov.ds.
(fmov.sd): Expand as famov.sd.
(pfmov.ds): Expand as pfamov.ds.
gas/testsuite/ChangeLog:
2003-08-16 Jason Eckhardt <jle@rice.edu>
* gas/i860/pseudo-ops01.{s,d}: New files.
* gas/i860/i860.exp: Execute the new test above.
* gas/i860/README.i860: Mention that pseudo-ops need more testing
and remove the align fill defect from the list.
2003-08-06 Jason Eckhardt <jle@rice.edu>
* config/tc-i860.c (i860_handle_align): New function.
* config/tc-i860.h (HANDLE_ALIGN): Define macro.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define macro.
gas/testsuite:
2003-08-06 Jason Eckhardt <jle@rice.edu>
* gas/i860/dir-align01.{s,d}: New files.
* gas/i860/i860.exp: Execute the new test above.
2003-08-06 Jason Eckhardt <jle@rice.edu>
* config/tc-i860.c (i860_process_insn): Check that instructions
with their dual-bit set are 8-byte aligned.
gas/testsuite:
2003-08-06 Jason Eckhardt <jle@rice.edu>
* gas/i860/dual02-err.l: Update expected error message.
* gas/i860/README.i860: Remove dual02-err from known failure list.
* gas/i860/dir-intel01.{s,d}: New files.
* gas/i860/dir-intel02.{s,d}: New files.
* gas/i860/dir-intel03-err.{s,l}: New files.
* gas/i860/i860.exp: Execute the above new tests.
* gas/i860/dual01.{s,d}: New files.
* gas/i860/dual02-err.{s,l}: New files.
* gas/i860/dual03.{s,d}: New files.
* gas/i860/i860.exp: Execute the above new tests.
* gas/i860/README.i860: Update.
* gas/m68hc11/abi.s: New test for abi elf flags.
* gas/m68hc11/abi-m68hc11-32-64.d: Test for 32-bit int, 64-bit float.
* gas/m68hc11/abi-m68hc11-16-64.d: Test for 16-bit int, 64-bit float.
* gas/m68hc11/abi-m68hc11-32-32.d: Test for 32-bit int, 32-bit float.
* gas/m68hc11/abi-m68hc11-16-32.d: Test for 16-bit int, 32-bit float.
* mips.h (CPU_RM7000): New macro.
(OPCODE_IS_MEMBER): Match CPU_RM7000 against 4650 insns.
bfd/
* archures.c (bfd_mach_mips7000): New.
* bfd-in2.h: Regenerated.
* cpu-mips.c (arch_info_struct): Add an entry for mips:7000.
* elfxx-mips.c (mips_set_isa_flags): Handle bfd_mach_mips7000.
(mips_mach_extensions): Add an entry for it.
opcodes/
* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
gas/
* config/tc-mips.c (hilo_interlocks): True for CPU_RM7000.
(mips_cpu_info_table): Add rm7000 and rm9000 entries.
gas/testsuite/
* gas/mips/rm7000.[sd]: New test.
* gas/mips/mips.exp: Run it.
2003-07-08 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_validate_fix): Do not warn about branch
target being a global symbol if not compiling SVR4 PIC code.
[ gas/testsuite/ChangeLog ]
2003-07-08 Chris Demetriou <cgd@broadcom.com>
* gas/testsuite/gas/mips/mips.exp: Make sure that branch-misc-2 is
run to compile non-PIC code, and add branch-misc-2pic.
* gas/mips/branch-misc-2.l: Adjust for change in non-PIC warnings.
* gas/mips/branch-misc-2pic.l: New file.
* gas/mips/branch-misc-2pic.s: New file.
(DSYMMODE): Remove.
(parse_exp): Replace expressionS argument with a h8_op. Parse the
operand size as well.
(skip_colonthing): Remove unused expression argument. Tighten checks
for 2-digit sizes.
(colonmod24): Remove.
(get_mova_operands): Combine calls to parse_exp and skip_colonthing.
(get_operand): Likewise. Use the standard code to read the size of
pc-relative operands.
(fix_operand_size): Include the size-guessing logic that used to be
in colonmod24 and get_operand. Don't apply dd:2 optimizations to
offsets with a symbolic component.
testsuite/
* gas/h8300/h8sx_disp2.[sd]: Add tests for symbolic displacements.
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (md_assemble): Support Intel Precott New
Instructions.
* gas/config/tc-i386.h (CpuPNI): New.
(CpuUnknownFlags): Add CpuPNI.
gas/testsuite/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add prescott.
* gas/i386/prescott.d: New file.
* gas/i386/prescott.s: Likewise.
include/opcode/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Precott New Instructions.
opcodes/
2003-06-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in
Intel Precott New Instructions.
(PREGRP27): New. Added for "addsubpd" and "addsubps".
(PREGRP28): New. Added for "haddpd" and "haddps".
(PREGRP29): New. Added for "hsubpd" and "hsubps".
(PREGRP30): New. Added for "movsldup" and "movddup".
(PREGRP31): New. Added for "movshdup" and "movhpd".
(PREGRP32): New. Added for "lddqu".
(dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry.
Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for
entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for
entry 0xd0. Use PREGRP32 for entry 0xf0.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(grps): Use PNI_Fixup in the "sidtQ" entry.
(prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30,
PREGRP31 and PREGRP32.
(float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb.
Use "fisttpll" in entry 1 in opcode 0xdd.
Use "fisttp" in entry 1 in opcode 0xdf.
special handling for n32 ABI.
(macro): Likewise.
* gas/mips/elf-rel-got-n32.d: Remove special handling for n32 ABI.
* gas/mips/elf-rel-xgot-n32.d: Likewise.
* gas/mips/jal-newabi.d: Likewise.
* ld-mips-elf/elf-rel-got-n32.d: Remove special handling for n32 ABI.
* ld-mips-elf/elf-rel-xgot-n32.d: Likewise.
* gas/z8k/dec.s: New file.
* gas/z8k/decbf.s: New file.
* gas/z8k/decf.s: New file.
* gas/z8k/eidi.s: New file.
* gas/z8k/eidif.s: New file.
* gas/z8k/inc.s: New file.
* gas/z8k/incbf.s: New file.
* gas/z8k/incf.s: New file.
* gas/z8k/inout.d: New file.
* gas/z8k/inout.s: New file.
* gas/z8k/jr-back.s: New file.
* gas/z8k/jr-backf.s: New file.
* gas/z8k/jr-forw.s: New file.
* gas/z8k/jr-forwf.s: New file.
* gas/z8k/ldk.s: New file.
* gas/z8k/ldkf.s: New file.
* gas/z8k/z8k.exp: New file.
(output_cie): Don't pad.
(output_fde): Add align argument. Pad to align if not 0.
(cfi_finish): Set .eh_frame alignment to EH_FRAME_ALIGNMENT.
Pad just last FDE to EH_FRAME_ALIGNMENT.
* gas/cfi/cfi-i386.d: Regenerated.
* gas/cfi/cfi-common-1.d: Regenerated.
* gas/cfi/cfi-common-2.d: Regenerated.
* gas/cfi/cfi-common-3.d: Regenerated.
* gas/cfi/cfi-x86_64.d: Regenerated.
* gas/cfi/cfi-alpha-1.d: Regenerated.
* gas/cfi/cfi-alpha-2.d: Regenerated.
* gas/cfi/cfi-alpha-3.d: Regenerated.
* gas/mips/elempic.d: Force o64 ABI.
* gas/mips/telempic.d: Likewise.
* ld-mips-elf/rel32-n32.d: Force big endian assembly.
* ld-mips-elf/rel32-o32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
* h8300.h (IMM4_NS, IMM8_NS): New.
(h8_opcodes): Replace IMM4 with IMM4_NS in mov.b and mov.w entries.
Likewise IMM8 for mov.w and mov.l. Likewise IMM16U for mov.l.
gas/testsuite
* gas/h8300/h8sx_mov_imm.[sd]: New test.
* gas/h8300/h8300.exp: Run it.
* gas/h8300/t01_mov.s: New file, tests mov instructions.
* gas/h8300/t02_mova.s: New file, tests mova instructions.
* gas/h8300/t03_add.s: New file, tests add instructions.
* gas/h8300/t04_sub.s: New file, tests sub instructions.
* gas/h8300/t05_cmp.s: New file, tests cmp instructions.
* gas/h8300/t06_ari2.s: New file, tests arithmetic instructions.
* gas/h8300/t07_ari3.s: New file, tests arithmetic instructions.
* gas/h8300/t08_or.s: New file, tests or instructions.
* gas/h8300/t09_xor.s: New file, tests xor instructions.
* gas/h8300/t10_and.s: New file, tests and instructions.
* gas/h8300/t11_logs.s: New file, tests logical instructions.
* gas/h8300/t12_bit.s: New file, tests bit instructions.
* gas/h8300/t13_otr.s.s: New file, tests misc. instructions.
* gas/h8300/t01_mov.exp: New file.
* gas/h8300/t02_mova.exp: New file.
* gas/h8300/t03_add.exp: New file.
* gas/h8300/t04_sub.exp: New file.
* gas/h8300/t05_cmp.exp: New file.
* gas/h8300/t06_ari2.exp: New file.
* gas/h8300/t07_ari3.exp: New file.
* gas/h8300/t08_or.exp: New file.
* gas/h8300/t09_xor.exp: New file.
* gas/h8300/t10_and.exp: New file.
* gas/h8300/t11_logs.exp: New file.
* gas/h8300/t12_bit.exp: New file.
* gas/h8300/t13_otr.exp: New file.
* gas/i860/bitwise.{s,d}: New files.
* gas/i860/bte.{s,d}: New files.
* gas/i860/fldst01.{s,d}: New files.
* gas/i860/fldst02.{s,d}: New files.
* gas/i860/fldst03.{s,d}: New files.
* gas/i860/fldst04.{s,d}: New files.
* gas/i860/fldst05.{s,d}: New files.
* gas/i860/fldst06.{s,d}: New files.
* gas/i860/fldst07.{s,d}: New files.
* gas/i860/fldst08.{s,d}: New files.
* gas/i860/float01.{s,d}: New files.
* gas/i860/float02.{s,d}: New files.
* gas/i860/float03.{s,d}: New files.
* gas/i860/float04.{s,d}: New files.
* gas/i860/form.{s,d}: New files.
* gas/i860/iarith.{s,d}: New files.
* gas/i860/ldst01.{s,d}: New files.
* gas/i860/ldst02.{s,d}: New files.
* gas/i860/ldst03.{s,d}: New files.
* gas/i860/ldst04.{s,d}: New files.
* gas/i860/ldst05.{s,d}: New files.
* gas/i860/ldst06.{s,d}: New files.
* gas/i860/pfam.{s,d}: New files.
* gas/i860/pfmam.{s,d}: New files.
* gas/i860/pfmsm.{s,d}: New files.
* gas/i860/pfsm.{s,d}: New files.
* gas/i860/regress01.{s,d}: New files.
* gas/i860/shift.{s,d}: New files.
* gas/i860/simd.{s,d}: New files.
2003-05-03 H.J. Lu <hjl@gnu.org>
* config/obj-elf.c (obj_elf_parse_section_letters): Make it a
fatal error for unknown section attribute.
* config/tc-alpha.c (alpha_elf_section_letter): Return -1 for
unknown section attribute.
* config/tc-ia64.c (ia64_elf_section_letter): Likewise.
* config/tc-ppc.c (ppc_section_letter): Likewise.
* config/tc-ia64.c (ia64_elf_section_letter): Handle 'o'.
(ia64_elf_section_type): Accept "unwind".
gas/testsuite/
2003-05-03 H.J. Lu <hjl@gnu.org>
* gas/ia64/ia64.exp: Add unwind.
* gas/ia64/unwind.s: New. Test the new section attribute 'o'
and the new section type "unwind".
* gas/ia64/unwind.d: Likewise.
2003-05-01 H.J. Lu <hjl@gnu.org>
* config/tc-ia64.h (tc_canonicalize_section_name): New.
* config/obj-elf.c (obj_elf_section_name): Call
tc_canonicalize_section_name if it is defined.
gas/testsuite/
2003-05-01 H.J. Lu <hjl@gnu.org>
* gas/ia64/ia64.exp: Add secname.
* gas/ia64/secname.s: New. Test the trailing '#' in section
name.
* gas/ia64/secname.d: Likewise.
2003-04-30 H.J. Lu <hjl@gnu.org>
* config/tc-ia64.c (ia64_number_to_chars): New function pointer.
(ia64_float_to_chars): Likewise.
(dot_byteorder): Set target_big_endian, ia64_number_to_chars
and ia64_float_to_chars by tc_segment_info_data.endian from
the current segment if byteorder == -1.
(md_begin): Call dot_byteorder to set target_big_endian.
(md_atof): Call ia64_float_to_chars to convert floating point.
(ia64_float_to_chars_bigendian): New function.
(ia64_float_to_chars_littleendian): Likewise.
(ia64_elf_section_change_hook): Likewise.
* config/tc-ia64.h (ia64_number_to_chars): New.
(md_number_to_chars): Changed to (*ia64_number_to_chars)
(ia64_elf_section_change_hook): New.
(md_elf_section_change_hook): Defined.
(ia64_segment_info_type): New struct.
(TC_SEGMENT_INFO_TYPE): Defined.
gas/testsuite/
2003-04-30 H.J. Lu <hjl@gnu.org>
* gas/ia64/ia64.exp: Add order.
* gas/ia64/order.s: New file.
* gas/ia64/order.d: Likewise.
* cgen.c (gas_cgen_begin): New function. If flag_signed_overflow_ok is set
call cgen_set_signed_overflow_ok otherwise call cgen_clear_signed_overflow_ok.
* cgen.h: Prototype gas_cgen_begin.
* testsuite/gas/m32r/m32r.exp: Run signed-relocs test.
* testsuite/gas/m32r/signed-relocs.s: New file: Test signed relocs.
* testsuite/gas/m32r/signed-relocs.d: New file: Expected results
* ia64-asmtab.c: Regenerate.
* gas/ia64/dependency-1.s: New file: Test read before write dependency.
* gas/ia64/dependency-1.d: New file: Expected assembly results.
* gas/ia64/ia64.exp: Run the new test.
* gas/mips/mips5.d: New test.
* gas/mips/mips5.l: New test stderr listing.
* gas/mips/mips5.s: New test source file.
* gas/mips/mips.exp: Run the mips5 test.
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro2): Adjust implementation of
M_ULH, M_ULHU, M_ULW, and M_ULD so that they work properly
in the case where the source and destination registers
are the same.
[ gas/testsuite/ChangeLog ]
2003-04-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/ulh.d: Adjust for ulh and ulhu macro assembly changes.
* gas/mips/mips.exp: Define new "gpr_ilocks" architecture
property, and add it to mips2 (and later) chips and r3900.
* gas/mips/uld2.s: New test source file.
* gas/mips/ulh2.s: Likewise.
* gas/mips/ulw2.s: Likewise.
* gas/mips/uld2.l: New test stderr listing.
* gas/mips/ulh2.l: Likewise.
* gas/mips/ulw2.l: Likewise.
* gas/mips/uld2-eb.d: New test.
* gas/mips/uld2-el.d: Likewise.
* gas/mips/ulh2-eb.d: Likewise.
* gas/mips/ulh2-el.d: Likewise.
* gas/mips/ulw2-eb-ilocks.d: Likewise.
* gas/mips/ulw2-eb.d: Likewise.
* gas/mips/ulw2-el-ilocks.d: Likewise.
* gas/mips/ulw2-el.d: Likewise.
* gas/mips/mips.exp: Run new tests for appropriate architectures.
* config/tc-mips.c (reloc_needs_lo_p): New function.
(fixup_has_matching_lo_p): New function.
(append_insn): Use reloc_needs_lo_p to check whether a relocation
might need a matching %lo(). Reuse the head of mips_hi_fixup_list
if that fixup already has a matching %lo(). Don't call frag_wane here.
(macro): Call frag_wane here if the last unmatched hi was in the
current frag.
(pic_need_relax): New function, split out from...
(md_estimate_size_before_relax): ...here.
(mips_frob_file): Use reloc_needs_lo_p. Use pic_need_relax to test
whether BFD_RELOC_MIPS_GOT16 fixups refer to global symbols.
gas/testsuite/
* gas/mips/rel12.[sd], gas/mips/rel13.[sd]: New tests.
* gas/mips/mips.exp: Run them.
* config/tc-mips.c (enum small_ex_type): Remove.
(imm_unmatched_hi): Remove.
(md_assemble): Remove use of imm_unmatched_hi. Remove the last
argument from calls to append_insn.
(append_insn): Remove unmatched_hi parameter; check reloc_type[0]
instead.
(macro_build): Update append_insn calls.
(mips16_macro_build, macro_build_lui): Likewise.
(mips_ip): Rework handling of small expressions. Move explicit
relocation handling into my_getSmallExpression. Assume that the
value of 'o' operands is zero if there is only one bracketed
expression left.
(percent_op): Make constant. Record the BFD relocation code
associated with each operator.
(my_getSmallParser, my_getPercentOp): Remove.
(parse_relocation): New function.
(my_getSamllExpression): Rework. Fill in relocations here
rather than in mips_ip.
gas/testsuite
* gas/mips/elf-rel8.[sd], gas/mips/elf-rel9.[sd],
gas/mips/elf-rel10.[sd], gas/mips/elf-rel11.[sd]: New tests.
* gas/mips/mips.exp: Run elf-rel8 and elf-rel9 for all elf
targets. Run elf-rel10 and elf-rel11 for NewABI targets.
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c: Update copyright years to include 2003.
(mips_ip): Fix indentation of "+A", "+B", and "+C" handling.
Additionally, clean up their code slightly and clean up their
comments some more.
* doc/c-mips.texi: Add MIPS32r2 to ".set mipsN" documentation.
[ gas/testsuite/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips32r2.d: Fix file description comment.
[ include/opcode/ChangeLog ]
2003-01-02 Chris Demetriou <cgd@broadcom.com>
* mips.h: Update copyright years to include 2002 (which had
been missed previously) and 2003. Make comments about "+A",
"+B", and "+C" operand types more descriptive.
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips1.d: New test.
* gas/mips/elf_arch_mips2.d: New test.
* gas/mips/elf_arch_mips3.d: New test.
* gas/mips/elf_arch_mips4.d: New test.
* gas/mips/elf_arch_mips5.d: New test.
* gas/mips/elf_arch_mips32.d: New test.
* gas/mips/elf_arch_mips32r2.d: New test.
* gas/mips/elf_arch_mips64.d: New test.
* gas/mips/empty.s: New test source file.
* gas/mips/mips.exp: Run new tests.
* gas/mips/elf_ase_mips16.d: Change to use empty.s
* gas/mips/elf_ase_mips16.s: Remove.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
* gas/mips/mips.exp: Define the notion of an "architecture data
array," add comments indicating how to add a new architecture and
suggestions for adding new tests. Populate the architecture data
array with many known architectures and convert many tests to
be run for multiple architectures.
(mips_arches): New global array.
(mips_arch_create, mips_arch_list_all, mips_arch_data)
(mips_arch_displayname, mips_arch_properties)
(mips_arch_as_flags, mips_arch_objdump_flags, mips_arch_matches)
(mips_arch_list_matching): New functions to operate on mips_arches.
(run_dump_test_arch, run_dump_test_arches, run_list_test_arch)
(run_list_test_arches): New functions.
(run_list_test): Document and add an optional "test name" argument.
* gas/mips/abs.d: Remove CPU-specific assembler and objdump flags,
and CPU names from test names.
* gas/mips/add.d: Likewise.
* gas/mips/and.d: Likewise.
* gas/mips/dli.d: Likewise.
* gas/mips/jal-empic-elf-2.d: Likewise.
* gas/mips/jal-empic-elf-3.d: Likewise.
* gas/mips/jal-empic-elf.d: Likewise.
* gas/mips/lb-svr4pic.d: Likewise.
* gas/mips/lb.d: Likewise.
* gas/mips/mips32.d: Likewise.
* gas/mips/mips4.d: Likewise.
* gas/mips/mips64.d: Likewise.
* gas/mips/rol-hw.d: Likewise.
* gas/mips/rol.d: Likewise.
* gas/mips/rol64-hw.d: Likewise.
* gas/mips/rol64.d: Likewise.
* gas/mips/elf-jal.d: Likewise. Also, indicate ELF in test name.
* gas/mips/mips64-mdmx.d: Tweak printed name to indicate that this
test uses the -mdmx flag.
* gas/mips/mips64-mips3d.d: Tweak printed name to indicate that
this test uses the -mips3d flag.
* gas/mips/mips64-mips3d-incl.d: New file.
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two
"dror" entries, and reorder the remaining "dror" and "ror" entries.
[ gas/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (macro): In M_DROL, M_DROR, M_ROL, and M_ROR,
use hardware rotate ops as appropriate. In M_DROL_I, M_DROR_I,
M_ROL_I, and M_ROR_I, simplify code, clean up warnings, and
arrange not to issue warnings about use of AT when AT is not
actually used.
[ gas/testsuite/ChangeLog ]
2002-12-18 Chris Demetriou <cgd@broadcom.com>
* gas/mips/rol.s: Add ".set noat" and some new instructions to test.
* gas/mips/rol64.s: Likewise.
* gas/mips/rol.l: New file.
* gas/mips/rol.d: Adjust to use rol.l and for rol.s changes.
* gas/mips/rol64.l: New file.
* gas/mips/rol64.d: Adjust to use rol64.l and for rol64.s changes.
* gas/mips/rol-hw.d: New file.
* gas/mips/rol-hw.l: New file.
* gas/mips/rol64-hw.d: New file.
* gas/mips/rol64-hw.l: New file.
* gas/mips/mips.exp: Run rol-hw and rol64-hw tests.
(gas_m68hc11_warning): New function.
(gas_m68hc11_message): New function.
(top): New tests for assembler errors.
(gas_m68hc11_opcode_list): New function.
(top): New tests for opcode list.
(ia64_gen_real_reloc_type): Handle it.
(pseudo_func): Add @ltoffx.
(md_begin): Build .<ltoffx>.
(ia64_force_relocation): True for LTOFF22X and LDXMOV.
* gas/ia64/ltoff22x-1.[ds]: New.
* gas/ia64/ia64.exp: Run it.
can find the real symbol and not a gas internal debug symbol.
* gas/m68hc11/insns.d: Update.
* gas/m68hc11/insns-dwarf2.d: Update.
* gas/m68hc11/insns12.d: Update.
* gas/m68hc11/opers12.s (min5b, min9b): Use 16 and -256 for the min.
* gas/m68hc11/opers12.d: Update after indexed offset operand fixes.
* gas/m68hc11/opers12-dwarf2.d: Likewise.
can find the real symbol and not a gas internal debug symbol.
* gas/m68hc11/insns.d: Update.
* gas/m68hc11/insns-dwarf2.d: Update.
* gas/m68hc11/insns12.d: Update.
* gas/m68hc11/opers12.s (min5b, min9b): Use 16 and -256 for the min.
* gas/m68hc11/opers12.d: Update after indexed offset operand fixes.
* gas/m68hc11/opers12-dwarf2.d: Likewise.
parameters. Added support for new opcode-list format. General
error message fixups.
(c4x_inst_add): Reject insn not for our CPU
(md_begin): Added matrix for setting the proper opcode-level &
device-flags according to cpu type and revision. Rewrite the
opcode hasher.
(c4x_operand_parse): Fix opcode bug
(c4x_operands_match): New function argument. Added dry-run
mechanism, that is optional error generation. Added constraint 'i'
and 'j'.
(c4x_insn_check): Added new function for post-verification of the
generated insn.
(md_assemble): Check all opcodes before croaking because of an
argument mismatch. Need this to be able to fully support
ortogonally arguments.
(md_parse_options): Revised commandprompt swicthes and added new
ones.
(md_show_usage): Complete rewrite of printout.
* gas/testsuite/gas/tic4x/addressing.s: Fix bug in one insn
* gas/testsuite/gas/tic4x/addressing_c3x.d: Update thereafter
* gas/testsuite/gas/tic4x/addressing_c4x.d: Update thereafter
* gas/testsuite/gas/tic4x/allopcodes.S: Add support for new
opclass.h changes
* gas/testsuite/gas/tic4x/opclasses.h: Added testsuites for
the new enhanced opcodes.
* gas/testsuite/gas/tic4x/opcodes.s: Regenerate
* gas/testsuite/gas/tic4x/opcodes_c3x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_c4x.d: Update from above
* gas/testsuite/gas/tic4x/opcodes_new.d: Added new testsuite for
the enhanced and special insns.
* gas/testsuite/gas/tic4x/tic4x.exp: Added the opcodes_new testsuite
* include/opcode/tic4x.h: File reordering. Added enhanced opcodes.
* opcodes/tic4x-dis.c: Added support for enhanced and special
insn.
(c4x_print_op): Added insn class 'i' and 'j'
(c4x_hash_opcode_special): Add to support special insn
(c4x_hash_opcode): Update to support the new opcode-list
format. Add support for the new special insns.
(c4x_disassemble): New opcode-list support.
