2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Add attiny167.
* doc/c-avr.texi: Likewise.
/include:
2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
* opcode/avr.h (AVR_ISA_TINY3): Define new opcode set for attiny167.
* config/tc-bfin.c (bfin_start_line_hook): Localize the labels
generated for LOOP_BEGIN and LOOP_END instructions.
(bfin_gen_loop): Likewise.
gas/testsuite/:
* gas/bfin/flow.d: Adjust since the generated labels for LOOP_BEGIN
and LOOP_END instruction are local now.
* gas/bfin/flow2.d: Likewise.
* config/bfin-parse.y (check_macfunc_option): Allow (IU)
option for multiply and multiply-accumulate to data register
instruction.
(check_macfuncs): Don't check if accumulator matches the data register
here.
(assign_macfunc): Check if accumulator matches the
data register in each rule that moves to the data
register.
gas/testsuite/
* gas/bfin/arithmetic.s, gas/bfin/arithmetic.d: Add check
for IU option.
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s:
Add check for mismatch of accumulator and data register.
opcodes/
* bfin-dis.c (decode_dsp32mac_0): Decode (IU) option for
multiply and multiply-accumulate to data register instruction.
* config/bfin-parse.y (check_macfunc_option): New.
(check_macfuncs): Check option by calling check_macfunc_option.
Fix comparison always true warnings. Both scalar instructions
of vector instruction must share the same mode option. Only allow
option mode at the end of the second instruction of the vector.
(asm_1): Check option by calling check_macfunc_option.
gas/testsuite/:
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s: Add
tests for bad options of "multiply and multipy-accumulate to
accumulator" instructions. Add new vector instruction option
mode tests.
* gas/bfin/vector2.s: Add new vector instruction option mode test.
* gas/bfin/vector2.d: Adjust accordingly.
* gas/bfin/expected_errors.s, gas/bfin/expected_errors.l: Add test
for mismatched half registers in vector multipy-accumulate
instructions.
From Jie Zhang <jie.zhang@analog.com>
* config/bfin-parse.y (asm_1): Check AREGS in comparison
instructions. And call yyerror () when comparing PREG with
DREG.
gas/testsuite/:
* gas/bfin/expected_comparison_errors.l: New test.
* gas/bfin/expected_comparison_errors.s: New test.
* gas/bfin/bfin.exp: Add expected_comparison_errors.
* read.c (s_mexit): Warn if attempting to exit a macro when not
inside a macro definition.
* gas/macros/exit.s: New test case.
* gas/macros/macros.exp: Run the new test, expect it to produce an
error result.
bfd/
* elf32-arm.c (elf32_arm_howto_table_1): Fix bitmasks for MOVW and
MOVT relocations.
(elf32_arm_final_link_relocate): Fix off by one MOVW/MOVT sign
extension.
(elf32_arm_relocate_section): Handle MOVW and MOVT
relocations. Improve safety check for other weird relocations.
(elf32_arm_check_relocs): Only set h->needs_plt for branch/call
relocations.
gas/
* config/tc-arm.c (md_apply_fix): Use correct offset range.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests): Add movw-merge and arm-app-movw.
* ld-arm/arm-app-movw.s: New test.
* ld-arm/arm-app.r: Update expected output.
* ld-arm/movw-merge.d: New test.
* ld-arm/movw-merge.s: New test.
* xtensa-isa.c (xtensa_isa_num_pipe_stages): Make max_stage static and
only compute its value once.
gas/
* config/tc-xtensa.c (xtensa_num_pipe_stages): New.
(md_begin): Initialize it.
(resources_conflict): Use it.
Do not regard weak symbols as having a known location.
(md_estimate_size_before_relax): Use new function.
(md_pcrel_from): Do not compute a pcrel against a weak symbol.
2008-02-18 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (match_template): Disallow 'l' suffix when
currently selected CPU has no 32-bit support.
(parse_real_register): Do not return registers not available on
currently selected CPU.
gas/testsuite/
2008-02-18 Jan Beulich <jbeulich@novell.com>
* gas/i386/att-regs.s, gas/i386/att-regs.d,
gas/i386/intel-regs.s, gas/i386/intel-regs.d: New.
* gas/i386/i386.exp: Run new tests.
2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (inoutportreg): New.
(process_immext): New.
(md_assemble): Use it.
(update_imm): Use imm16 and imm32s.
(i386_att_operand): Use inoutportreg.
opcodes/
2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (operand_type_init): Add OPERAND_TYPE_INOUTPORTREG.
* i386-init.h: Regenerated.
* config/tc-arm.c (s_arm_unwind_save): Advance the input line
pointer past the comma after parsing a floating point register
name.
* gas/arm/fp-save.s: New test.
* gas/arm/fp-save.d: Expected disassembly.
* avr.h (AVR_ISA_2xxe): Define.
* config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
to AVR_ISA_2xxe.
(avr_operand): Disallow post-increment addressing in the lpm
instruction for the attiny26.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_real_register): Don't return 'FLAT'
if not in Intel mode.
(i386_intel_operand): Ignore segment overrides in immediate and
offset operands.
(intel_e11): Range-check i.mem_operands before use as array
index. Filter out FLAT for uses other than as segment override.
(intel_get_token): Remove broken promotion of "FLAT:" to mean
"offset FLAT:".
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.s: Replace invalid offset expression with
valid ones.
* gas/i386/x86_64.s: Likewise.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-opc.h (RegFlat): New.
* i386-reg.tbl (flat): Add.
* i386-tbl.h: Re-generate.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (allow_pseudo_reg): New.
(parse_real_register): Check for NULL just once. Allow all
register table entries when allow_pseudo_reg is non-zero.
Don't allow any registers without type when allow_pseudo_reg
is zero.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
(tc_x86_frame_initial_instructions): Adjust for above change.
* config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
(tc_parse_to_dw2regnum): New.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
* dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
(cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
error handling.
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/cfi/cfi-i386.s: Add code testing use of all registers.
Fix a few comments.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/cfi/cfi-i386.d, gas/cfi/cfi-x86_64.d: Adjust.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-gen.c (process_i386_registers): Process new fields.
* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
unsigned char. Add dw2_regnum and Dw2Inval.
* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
register names.
* i386-tbl.h: Re-generate.
argument.
(tic4x_insn_add): Likewise.
(md_begin): Drop cast that was discarding a const qualifier.
* config/tc-d30v.c (get_reloc): Add const qualifier to op
argument.
(build_insn): Drop cast that was discarding a const qualifier.
* config/tc-xtensa.c (relax_frag_immed): Change internal consistency
checks into assertions. When relaxation produces an operation that
does not fit in the current FLIX instruction, make sure that the
operation is relaxed as needed to account for being placed following
the current instruction.
