This change makes gas's notion of the msp430 dwarf2 address size match
that of gcc and gdb. This is needed so that the format of addresses
generated for DW_LNE_set_address in .debug_line will match the address
size for the compilation unit.
In gcc/config/msp430/msp430.h, it's set to 4:
#define DWARF2_ADDR_SIZE 4
Likewise in gdb/msp430-tdep.c:
set_gdbarch_dwarf2_addr_size (gdbarch, 4);
(As far as I can tell, however, GDB doesn't use this value when decoding
.debug_line. Instead, GDB uses the Pointer Size from the compilation
unit.)
readelf is able to seamlessly handle mismatches between these various
sizes by using the size of the DW_LNE_set_address instruction to
determine the address size. Another way to fix this problem is to
make GDB behave in a similar manner. In my opinion, GDB should detect
and inform the user about these mismatches; it's not clear to me if
it's correct for GDB to go ahead and read the address anyway when a
size mismatch is detected.
Without this change, addresses in .debug_line are encoded in two bytes
for some multilibs. When GDB reads the address for
DW_LNE_set_address, it uses the pointer size provided by the CU. When
these values don't match, GDB reads the wrong number of bytes. In the
cases that I've looked at, GDB is reading 4 bytes from a 2 byte
container, which results in a garbage address. GDB discards lines
which have a bogus address; the end result is that GDB records no line
number information for CUs which have a mismatch between the address
size (from the CU) and the format of the address used by
DW_LNE_set_address.
gas/ChangeLog:
* config/tc-msp430.h (DWARF2_ADDR_SIZE): Set to 4.
Basic all instructions assembler test, auto-generated by CGEN, then
fixed by hand for some cases where CGEN had generated invalid
instruction operands.
gas/ChangeLog:
* testsuite/gas/ip2k/allinsn.d: New file.
* testsuite/gas/ip2k/allinsn.s: New file.
* testsuite/gas/ip2k/ip2k-allinsn.exp: New file.
In commit 02a79b89fd some of the load
instructions with a zero offset (where the offset is not mentioned) were
marked as NO-DIS, meaning that the disassembler must display the offset,
even though it is zero.
This change seems a little strange to me as it was only applied to some
loads, not all, and the same change was not applied to the stores.
However, I'm reluctant to revert a specific change to the assembler,
when the output is obviously correct. With this commit then I simply
bring the expected assembler test results into line with what is
actually produced.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Add explicit 0 offset to
some load instructions.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/regression.d: Likewise.
In commit 02a79b89fd all instruction
aliases that have a '.l' suffix were marked as NO-DIS, so the
disassembler will not display them, in preference to the instruction
without the suffix. However, the gas testsuite was not updated at the
time, this commit fixes that oversight.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Remove unneeded '.l'
suffixes from instruction mnemonics in expected output.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/regression.d: Likewise.
* testsuite/gas/epiphany/sample.d: Likewise.
In commit 02a79b89fd the register aliases
sb, sl, and ip were made less preferred than r9, r10, and r12, however,
the expected test results were not updated. This commit fixes this
oversight and updates the test results.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Update expected register
names.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/sample.d: Likewise.
Always set the bytes_per_line field (of struct disassemble_info) to the
same constant value, this is inline with the advice contained within
include/dis-asm.h.
Setting this field to a constant value will cause the disassembler
output to be better aligned.
cpu/ChangeLog:
* epiphany.opc (epiphany_print_insn): Set info->bytes_per_line to
a constant to better align disassembler output.
opcodes/ChangeLog:
* epiphany-dis.c: Regenerated from latest cpu files.
gas/ChangeLog:
* testsuite/gas/epiphany/sample.d: Update expected output.
Use OPTION_MXXX for -mxxx option in x86 assembler.
* config/tc-i386.c (OPTION_OMIT_LOCK_PREFIX): Renamed to ...
(OPTION_MOMIT_LOCK_PREFIX): This.
(md_longopts): Updated.
(md_parse_option): Likewise.
In the instruction to write to the ARMv8.2 PSTATE field UAO,
MSR UAO, #<imm>, the immediate should be either 0 or 1 but GAS accepts
any unsigned 4-bit integer.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR UAO immediate operand.
gas/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/armv8_2-a-illegal.d: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.s: New.
Change-Id: Ibdec4967c00b1ef3be9dbc43d23b2c70d1a0b28c
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils. So, counter that. This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Return true
for m68hc11/12 and xgate triples.
gas/
* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
* testsuite/ld-elf/pr14156a.d: Likewise.
* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
* testsuite/ld-elf/sec64k.exp: Likewise.
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
instructions that can support stack pointer operations.
* rl78-decode.c: Regenerate.
* rl78-dis.c: Fix display of stack pointer in MOVW based
instructions.
* testsuite/gas/rl78/sp-relative-movw.s: New test.
* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
* testsuite/gas/rl78/rl78.exp: Run the new test.
Some of the RAS system registers added to binutils as part of the ARMv8.2
support are missing the feature checks to warn when they aren't
supported by the target.
This patch adds the missing feature checks with a test to check that
the correct warnings are given for all the ARMv8.2 system registers.
gas/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/illegal-sysreg-2.l: New.
* testsuite/gas/aarch64/illegal-sysreg-2.d: New.
opcodes/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
testing for RAS support. Add checks for erxfr_el1, erxctlr_el1,
erxtatus_el1 and erxaddr_el1.
Change-Id: I66b590ea49c1eb6b0e5c93e0dc2bc9c4e79a52fe
Fix:
cc1: warnings being treated as errors
.../gas/config/tc-nios2.c: In function 'output_movia':
.../gas/config/tc-nios2.c:3474: warning: 'code' may be used uninitialized in this function
make[4]: *** [tc-nios2.o] Error 1
seen with GCC 4.1.2 and 4.4.7.
gas/
* config/tc-nios2.c (output_movia): Preset `code' to 0.
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_v8_2): New.
(insns): Add "esb".
* testsuite/gas/arm/armv8_2-a.d: New.
* testsuite/gas/arm/armv8_2-a.s: New.
opcodes/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* arm-dis.c (arm_opcodes): Add "esb".
(thumb_opcodes): Likewise.
Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
For ISA_B/C only the combination #,d(An) is allowed in addition to the
ISA_A combinations for move.b and move.w (and pc-relative is never
allowed as destination).
opcodes/
PR gas/13050
* m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
addition to ISA_A.
gas/
PR gas/13050
* testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2.
* testsuite/gas/m68k/p13050-1.s: New file.
* testsuite/gas/m68k/p13050-2.d: New file.
* testsuite/gas/m68k/p13050-2.s: New file.
The convention within for relocation names is that they start with the
string "R_", however, this is not so for ARC for the display names of
relocations, however, internally, the names for the relocations types do
have the 'R_' prefix. I suspect that the missing 'R_' on the output
strings was an oversight, as I can't see any comment to the contrary.
To bring ARC into line with other targets, this commit adds the 'R_'
prefix to the output strings used for relocation names, and updates all
of the assembler tests where this was exposed.
bfd/ChangeLog:
* elf32-arc.c (reloc_type_to_name): Change ARC_RELOC_HOWTO to
place 'R_' before the reloc name returned.
(elf_arc_howto_table): Change ARC_RELOC_HOWTO to place 'R_' before
the relocation string.
gas/ChangeLog:
* testsuite/gas/arc/adc.d: Add 'R_' prefix to relocation names.
* testsuite/gas/arc/add.d: Likewise.
* testsuite/gas/arc/and.d: Likewise.
* testsuite/gas/arc/asl.d: Likewise.
* testsuite/gas/arc/asr.d: Likewise.
* testsuite/gas/arc/bic.d: Likewise.
* testsuite/gas/arc/extb.d: Likewise.
* testsuite/gas/arc/extw.d: Likewise.
* testsuite/gas/arc/j.d: Likewise.
* testsuite/gas/arc/jl.d: Likewise.
* testsuite/gas/arc/ld2.d: Likewise.
* testsuite/gas/arc/lsr.d: Likewise.
* testsuite/gas/arc/mov.d: Likewise.
* testsuite/gas/arc/or.d: Likewise.
* testsuite/gas/arc/pcl-relocs.d: Likewise.
* testsuite/gas/arc/pcrel-relocs.d: Likewise.
* testsuite/gas/arc/pic-relocs.d: Likewise.
* testsuite/gas/arc/plt-relocs.d: Likewise.
* testsuite/gas/arc/rlc.d: Likewise.
* testsuite/gas/arc/ror.d: Likewise.
* testsuite/gas/arc/rrc.d: Likewise.
* testsuite/gas/arc/sbc.d: Likewise.
* testsuite/gas/arc/sda-relocs.d: Likewise.
* testsuite/gas/arc/sda-relocs2.d: Likewise.
* testsuite/gas/arc/sexb.d: Likewise.
* testsuite/gas/arc/sexw.d: Likewise.
* testsuite/gas/arc/st.d: Likewise.
* testsuite/gas/arc/sub.d: Likewise.
* testsuite/gas/arc/tls-relocs.d: Likewise.
* testsuite/gas/arc/xor.d: Likewise.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account
for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in
comb array.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch
value.
(arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use
value.
gas/
* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
(arm_ext_v8m): New feature for ARMv8-M.
(arm_ext_atomics): New feature for ARMv8 atomics.
(do_tt): New encoding function for TT* instructions.
(insns): Add new entries for ARMv8-M specific instructions and
reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
(arm_archs): Define armv8-m.main architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
clarify the ordering rule.
(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting
Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile
to 'A' if extension bit for atomic instructions is set, unless it is
ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0
for ARMv8-M Mainline.
gas/testsuite/
* gas/arm/archv8m.s: New file.
* gas/arm/archv8m-main.d: Likewise.
* gas/arm/attr-march-armv8m.main.d: Likewise.
* gas/arm/any-armv8m.s: Likewise.
* gas/arm/any-armv8m.d: Likewise.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare.
(MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN.
(TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15.
include/opcode/
* arm.h (ARM_EXT2_ATOMICS): New extension bit.
(ARM_EXT2_V8M): Likewise.
(ARM_EXT_V8): Adjust comment with regards to atomics and remove
mention of legacy use for that bit.
(ARM_AEXT2_V8_1A): New architecture extension bitfield.
(ARM_AEXT2_V8_2A): Likewise.
(ARM_AEXT_V8M_MAIN): Likewise.
(ARM_AEXT2_V8M): Likewise.
(ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield.
(ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A.
(ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A.
(ARM_ARCH_V8M_MAIN): New architecture feature bitfield.
(ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield
and reindent.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
(ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of
feature bits.
(ARM_ARCH_V8_1A_SIMD): Likewise.
(ARM_ARCH_V8_1A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl,
stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of
ARM_EXT_V8.
(thumb32_opcodes): Add entries for wide ARMv8-M instructions.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (move_or_literal_pool): Check mov.w, mvm and movw
availability against arm_ext_v6t2 instead of checking arm_arch_t2,
fixing comments along the way.
(handle_it_state): Check arm_ext_v6t2 instead of arm_arch_t2 to
generate IT instruction.
(t1_isa_t32_only_insn): New function.
(md_assemble): Use above new function to check for invalid wide
instruction for CPU Thumb ISA and to determine what Thumb extension
bit is necessary for that instruction.
(md_apply_fix): Use arm_ext_v6t2 instead of arm_arch_t2 to decide if
branch is out of range.
include/opcode/
* arm.h (ARM_ARCH_THUMB2): Add comment explaining its meaning and
remove extension bit not including any Thumb-2 instruction.
PR gas/19386
* doc/as.texinfo (Strings): Prepend a space to index entries that
start with a backslash. This works around a problem in the pdf
generator.
We only need to store 32-bit immediate in 64-bit and optimize 64-bit
displacement to 32-bit only for 64-bit BFD.
* config/tc-i386.c (optimize_imm): Store 32-bit immediate in
64-bit only for 64-bit BFD
(optimize_disp): Optimize 64-bit displacement to 32-bit only
for 64-bit BFD.
2015-12-16 Mickael Guene <mickael.guene@st.com>
bfd/
* bfd-in2.h: Regenerate.
* reloc.c: Add new relocations.
* libbfd.h (bfd_reloc_code_real_names): Add new relocations
display names.
* elf32-arm.c (elf32_arm_howto_table_1): Add HOWTO for new
relocations.
(elf32_arm_reloc_map): Add bfd/arm mapping for new relocations.
(elf32_arm_final_link_relocate): Implement new relocations
resolution.
gas/
* doc/c-arm.texi: Add documentation about new directives
* config/tc-arm.c (group_reloc_table): Add mapping between gas
syntax and new relocations.
(do_t_add_sub): Keep new relocations for add operand.
(do_t_mov_cmp): Keep new relocations for mov operand.
(insns): Use 'shifter operand with possible group relocation'
operand parse code for movs operand.
(md_apply_fix): Implement mov and add encoding when new
relocations on them.
(tc_gen_reloc): Add new relocations.
(arm_fix_adjustable): Since offset has a limited range ([0:255])
we disable adjust_reloc_syms() for new relocations.
gas/testsuite/
* gas/arm/adds-thumb1-reloc-local.d: New
* gas/arm/adds-thumb1-reloc-local.s: New
* gas/arm/movs-thumb1-reloc-local.d: New
* gas/arm/movs-thumb1-reloc-local.s: New
include/
* elf/arm.h: Add new arm relocations.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests_common): Add new relocations
tests.
* ld-arm/thumb1-adds.d: New
* ld-arm/thumb1-adds.s: New
* ld-arm/thumb1-movs.d: New
* ld-arm/thumb1-movs.s: New
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. The FP16 additions to the
scalar pairwise group introduce a new vector type, 2H. This patch adds
support for this vector type to binutils.
The patch adds a new operand qualifier to the enum
aarch64.h:aarch64_opnd_qualifier. This interferes with the calculation
used by aarch64-dis.c:get_vreg_qualifier_from_value, called when
decoding an instruction. Since the new vector type is only used in FP16
scalar pairwise instructions which do not require the function, this
patch adjusts the function to ignore the new qualifier.
gas/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to
take into account new vector type 2H.
(vectype_to_qualifier): Likewise.
include/opcode/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (enum aarch64_opnd_qualifier): Add
AARCH64_OPND_QLF_V_2H.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.coM>
* aarch64-dis.c (get_vreg_qualifier_from_value): Update comment
and adjust calculation to ignore qualifier for type 2H.
* aarch64-opc.c (aarch64_opnd_qualifier): Add "2H".
Change-Id: Idf9a3694732962c80fde04f08c7304de9164f126
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. The FP16 additions to the
scalar pairwise group introduce a new vector type. This patch reworks
code in the assembler to allow the addition of the new type.
The new vector type requires the addtion of a new operand qualifier to
the enum aarch64_opnd_qualifier which is defined
include/opcodes/aarch64.h, in the group prefixed by AARCH64_OPN_QLF_V_.
The correctness of the GAS utility function
tc-aarch64.c:vectype_to_qualifier is heavily dependent on the number and
ordering of this group. In particular, it makes assumptions about the
positions of the members of the group that are not true if a qualifier
for type 2H is added before the qualifier for 4H.
This patch reworks the function to weaken its assumptions, making it
calculate positions in the group from the type (B, H, S, D, Q) and
register width.
gas/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Calculate operand
qualifier from per-type base and offet.
Change-Id: I95535864e342a6dec46f69d2696b3900a008f0b1
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds the instruction to
binutils as a HINT alias that takes an operand.
A new operand type, AARCH64_OPND_BARRIER_PSB, is added to represent the
operand to PSB. A parser for the operand type is added to the assembler
and a printer to the disassembler. The operand name "csync" is added to
the list of HINT options with HINT number #17. Encoding and decoding of
the operand is handled by the ins_hint/ext_hint functions added in the
preceding patches.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
(parse_barrier_psb): New.
(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
(md_begin): Set up aarch64_hint_opt_hsh.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: Enable the statistical profiling
extension. Update the expected output.
* gas/aarch64/system-2.s: Add tests for PSB CSYNC.
* gas/aarch64/system.d: Update the expected output.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_opnd): Add AARCH64_OPND_BARRIER_PSB.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): Add "csync".
(aarch64_print_operands): Handle AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_feature_stat_profile): New.
(STAT_PROFILE): New.
(aarch64_opcode_table): Add "psb".
(AARCH64_OPERANDS): Add "BARRIER_PSB".
Change-Id: I5ffb672d26a8b15b48785478d359350a9b70ca09
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers and a new instruction. This patch set
adds support for the extension to binutils, enabled when
-march=armv8.2-a+profile is given.
The patches in this series:
- Add the new command line option and feature flags.
- Add the new system registers.
- Adjust the maximum number of aliases permitted for an instruction.
- Add support for HINT aliases which take operands.
- Add the new instruction, an alias of the HINT instruction.
This patch adds the option "profile" to the permitted architecture
extensions, disabling it by default.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "profile".
* doc/c-aarch64.texi (AArch64 Extensions): Add "profile".
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_PROFILE): New.
Change-Id: If9bb4a9b69a264180f96f8ffaf10b15ced273699
ARMv8.2 adds the new system instruction DC CVAP. This patch adds support
for the instruction to binutils, enabled when -march=armv8.2-a is
selected.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_sys_ins_reg): Add check of
architectural support for system register.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for dc instruction.
* gas/aarch64/sysreg-2.s: Add uses of dc instruction.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_sys_ins_reg_supported_p): Declare.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): Add "cvap".
(aarch64_sys_ins_reg_supported_p): New.
Change-Id: I3158b97d9bbee9644c2d0e2986db807412ef1053
gas/ChangeLog:
2015-12-10 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-sparc.texi (Sparc-Regs): Document the %dN and %qN notation
for floating-point registers.
ARMv8.1 includes CRC as a required extension but this isn't reflected in
the features enabled by -march=armv8.1-a. The FP16 feature modifier also
clashes with AARCH64_FEATURE_V8_1 and the list of features for ARMv8.2
is missing ARMv8.1 features.
This patch enables +crc for -march values of armv8.1-a and later. It
also fixes the values for AARCH64_FEATURE_F16 and makes
AARCH64_ARCH_V8_2 and superset of AARCH64_ARCH_V8_2.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc.
include/opcode
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): Fix clash with
AARCH64_FEATURE_V8_1.
(AARCH64_ARCH_V8_1): Add AARCH64_FEATURE_CRC.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_CRC and
AARCH64_FEATURE_V8_1.
Change-Id: I8af5369f6df2430b28f6cec92870d2a4d14a7431
There's a set of legacy command line arguments that the arc assembler
still accepts, however, these arguments not longer have any effect on
the assembler.
Currently we return false from md_parse_option for all of these
arguments, with the result that the assembler terminates with an error
message.
We should return true indicating that the argument has been accepted,
even though we ignore it.
gas/ChangeLog:
* config/tc-arc.c (md_parse_option): Return 1 in order to accept
dummy arguments.
The SPARC Refence Manual documents the %dN and %qN syntax to
refer to double and quad-precision floating-point registers,
respectively. See OSA2015 Appendix C, Assembly Language Syntax,
C1.1 Register Names.
This patch adds support for these names to GAS. This eases the
porting of software from Solaris to GNU/Linux, as these register
names have been supported by the Solaris linker for a long time
and many assembler require that support.
gas/ChangeLog:
2015-12-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Support %dN and %qN notation for
double and quad-precision floating-point registers.
While not allowed, this certainly shouldn't result in confusing the
programmer (by skipping lines in unexpected ways): Without returning,
demand_empty_rest_of_line() (at the end of the function) will demand
the _next_ line to be empty, and without the conditional we would
ignore the next line.
.file directives may be used to identify the scope of local symbols,
the purpose of which gets subverted when re-ordering them. Only allow
the first of them to be moved to the first position.
Various fixes to linker relaxation. In general, we need to support
relaxing every branch, even if we don't relax it in the assembler,
so we can optionally defer relaxation to the linker.
* elf32-rl78.c (rl78_offset_for_reloc): Add more relocs.
(rl78_elf_relax_section): Add bc/bz/bnc/bnz/bh/bnh. Fix reloc
choices.
* config/rl78-parse.y: Make all branches relaxable via
rl78_linkrelax_branch().
* config/tc-rl78.c (rl78_linkrelax_branch): Mark all relaxable
branches with relocs.
(options): Add OPTION_NORELAX.
(md_longopts): Add -mnorelax.
(md_parse_option): Support OPTION_NORELAX.
(op_type_T): Add bh, sk, call, and br.
(rl78_opcode_type): Likewise.
(rl78_relax_frag): Fix not-relaxing logic. Add sk.
(md_convert_frag): Fix relocation handling.
(tc_gen_reloc): Strip relax relocs when not linker relaxing.
(md_apply_fix): Defer overflow handling for anything that needs a
PLT, to the linker.
* config/tc-rl78.h (TC_FORCE_RELOCATION): Force all relocations to
the linker when linker relaxing.
* doc/c-rl78.texi (norelax): Add.
PR gas/19276
gas * config/tc-arm.h (SUB_SEGMENT_ALIGN): Do not define for COFF/PE
targets.
testsuite * gas/arm/align64.d: Skip for COFF/PE targets.
* gas/arm/bundle-lock.d: Adjust for COFF/PE targets.
ARMv8.2 adds optional support for 16-bit operations to the FP and
Adv.SIMD instructions. This patch adds a feature macro for this support
with a new command line option "+fp16" to enable/disable it.
Although the command line option is added as an architecture extension,
it only affects instructions available with when +fp or +simd is
enabled. If +fp16 is specified then it will also enable +fp.
There are currently no FP16 instructions implemented in binutils, this
patch is to enable subsequent work on supporting the extension.
gas/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "fp16".
* doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): New.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_F16 to ARMv8.2
features.
Change-Id: Id2021e0513946e16d0935c2a5b9605574cdff95a
2015-11-24 Christophe Monat <christophe.monat@st.com>
* config/tc-arm.c (move_or_literal_pool): Do not transform ldr
ri,=imm into movs when ri is a high register in T1.
2015-11-24 Christophe Monat <christophe.monat@st.com>
* gas/arm/thumb2_ldr_immediate_armv6t2.s: Added high register
tests.
* gas/arm/thumb2_ldr_immediate_armv6t2.d: Accounted for new test
cases.
* gas/arm/thumb2_ldr_immediate_highregs_armv6t2.s: New.
* gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: New.
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils ARM target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_archs): Add "armv8.2-a".
* doc/c-arm.texi (-march): Add "armv8.2-a".
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* arm.h (ARM_EXT2_V8_2A): New.
(ARM_ARCH_V8_2A): New.
Change-Id: I9e0f50e3c6cea24e6b87b8b862fd4e1cdcc1052e
ARMv8.2 is an architectural extension of ARMv8. This patch adds an
architecture feature macro for ARMv8.2 to the binutils AArch64 target
with GAS command line option -march=armv8.2-a.
gas/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
* doc/c-aarch64.texi (-march): Likewise.
include/opcode/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_V8_2): New.
(AARCH64_ARCH_V8_2): New.
Change-Id: I129232ab00234a07d18ce4b619607344acb3cbaf
Defining this to zero for COFF and PE meant that code sections were
padded with zeros. The fact that no one has complained since 2006
says these targets are dead, I guess.
* config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
This code tries to shift an integer 31 bits which triggers a werror:
gas/config/tc-microblaze.c:742:21: error: integer overflow in expression [-Werror=overflow]
e->X_add_number |= -(1 << 31);
Cast the 1 to offsetT to match X_add_number to fix things.
This patch adds support to the AArch64 back-end for the Cortex-A35
processor, as recently announced by ARM. The ARM Cortex-A35 provides
full support for the ARMv8-A architecture, including the CRC extension,
with optional Advanced-SIMD and Floating-Point support. We therefore set
feature flags for this CPU to AARCH64_ARCH_V8 and AARCH64_FEATURE_CRC, in
the same fashion as Cortex-A53 and Cortex-A57.
Tested in a cross environment for AArch64 with no issues.
2015-11-11 Matthew Wahab <matthew.wahab@arm.com>
PR gas/19217
* config/tc-arm.c (move_or_literal_pool): Remove redundant feature
check. Fix some code formatting. Drop use of MOVT. Add some
comments.
2015-11-11 Matthew Wahab <matthew.wahab@arm.com>
PR gas/19217
* gas/arm/thumb2_ldr_immediate_armv6t2.d: Update expected output.
opcode * rx.h (enum RX_Operand_Type): Add RX_Operand_Zero_Indirect.
opcodes * rx-decode.opc (rx_disp): If the displacement is zero, set the
type to RX_Operand_Zero_Indirect.
* rx-decode.c: Regenerate.
* rx-dis (print_insn): Handle RX_Operand_Zero_Indirect.
gas * config/rx-parse.y: Allow zero value for 5-bit displacements.
tests * gas/rx/mov.sm: Add tests for zero offset indirect moves.
* gas/rx/mov.d: Update expected output.
ld * Makefile.am (ALL_64_EMULATION_SOURCES): Add support for
CloudABI on aarch64. For this target we have to make sure we use
ELFOSABI_CLOUDABI instead of ELFOSABI_NONE.
* configure.tgt (targ_emul): Likewise.
* emulparams/aarch64cloudabi.sh: New file.
* emulparams/aarch64cloudabib.sh: New file.
* Makefile.in: Regenerate.
bfd * config.bfd (targ_defvec): Add support for CloudABI on aarch64.
For this target we have to make sure we use ELFOSABI_CLOUDABI
instead of ELFOSABI_NONE.
* configure.ac (tb): Likewise.
* elfnn-aarch64.c: Likewise.
* targets.c (_bfd_target_vector): Likewise.
* configure: Regenerate.
gas * config/tc-aarch64.c (elf64_aarch64_target_format): Select the
cloudabi format if the TARGET_OS is cloudabi.
This patch adds support for the R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX relocations proposed in
https://groups.google.com/forum/#!topic/x86-64-abi/n9AWHogmVY0
to gas and ld. It updates gas to generate R_X86_64_GOTPCRELX,
R_X86_64_REX_GOTPCRELX if there is a REX prefix, relocation for memory
operand, foo@GOTPCREL(%rip). With the locally defined symbol, foo, we
convert
mov foo@GOTPCREL(%rip), %reg
to
lea foo(%rip), %reg
and convert
call/jmp *foo@GOTPCREL(%rip)
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg, foo@GOTPCREL(%rip)
to
test $foo, %reg
and convert
binop foo@GOTPCREL(%rip), %reg
to
binop $foo, %reg
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf64-x86-64.c: Include opcode/i386.h.
(x86_64_elf_howto_table): Add R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(R_X86_64_standard): Replace R_X86_64_PLT32_BND with
R_X86_64_REX_GOTPCRELX.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_x86_64_check_relocs): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX. Replace need_convert_mov_to_lea with
need_convert_load.
(elf_x86_64_gc_sweep_hook): Handle R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX.
(elf_x86_64_size_dynamic_sections): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_convert_mov_to_lea): Renamed to ...
(elf_x86_64_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_X86_64_GOTPCRELX and
R_X86_64_REX_GOTPCRELX transformations.
* reloc.c (BFD_RELOC_X86_64_GOTPCRELX): New.
(BFD_RELOC_X86_64_REX_GOTPCRELX): Likewise.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
(tc_gen_reloc): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
true for BFD_RELOC_X86_64_GOTPCRELX and
BFD_RELOC_X86_64_REX_GOTPCRELX.
gas/testsuite/
* gas/i386/i386.exp: Run x86-64-gotpcrel.
* gas/i386/x86-64-gotpcrel.d: New file.
* gas/i386/x86-64-gotpcrel.s: Likewise.
* gas/i386/ilp32/x86-64-gotpcrel.d: Likewise.
* gas/i386/x86-64-localpic.d: Replace R_X86_64_GOTPCREL with
R_X86_64_REX_GOTPCRELX.
* gas/i386/ilp32/x86-64-localpic.d: Likewise.
include/elf/
* x86-64.h (R_X86_64_GOTPCRELX): New.
(R_X86_64_REX_GOTPCRELX): Likewise.
ld/testsuite/
* ld-ifunc/ifunc-5r-local-x86-64.d: Replace R_X86_64_GOTPCREL
with R_X86_64_REX_GOTPCRELX.
* ld-x86-64/plt-main1.rd: Likewise.
* ld-x86-64/plt-main3.rd: Likewise.
* ld-x86-64/plt-main4.rd: Likewise.
* ld-x86-64/gotpcrel1.dd: New file.
* ld-x86-64/gotpcrel1.out: Likewise.
* ld-x86-64/gotpcrel1a.S: Likewise.
* ld-x86-64/gotpcrel1b.c: Likewise.
* ld-x86-64/gotpcrel1c.c: Likewise.
* ld-x86-64/gotpcrel1d.S: Likewise.
* ld-x86-64/load1.s: Likewise.
* ld-x86-64/load1a.d: Likewise.
* ld-x86-64/load1b.d: Likewise.
* ld-x86-64/load1c.d: Likewise.
* ld-x86-64/load1d.d: Likewise.
* ld-x86-64/x86-64.exp: Run load1a, load1b, load1c and load1d
tests. Run gotpcrel1 test.
This patch adds support for the R_386_GOT32X relocation proposed in
https://groups.google.com/forum/#!topic/ia32-abi/GbJJskkid4I
to gas and ld. It updates gas to generate R_386_GOT32X relocation for
memory operand, foo@GOT[(%reg)]. We must encode "mov foo@GOT, %eax"
with the 0x8b opcode, instead of the 0xb8 opcode, so that it can be
transformed to "lea foo, %eax". With the locally defined symbol, foo,
we convert
mov foo@GOT[(%reg1)], %reg2
to
lea foo[@GOTOFF(%reg1)], %reg2
and convert
call/jmp *foo@GOT[(%reg)]
to
nop call foo/jmp foo nop
When PIC is false, convert
test %reg1, foo@GOT[(%reg2)]
to
test $foo, %reg1
and convert
binop foo@GOT[(%reg1)], %reg2
to
binop $foo, %reg2
where binop is one of adc, add, and, cmp, or, sbb, sub, xor instructions.
bfd/
* elf32-i386.c: Include opcode/i386.h.
(elf_howto_table): Add R_386_GOT32X.
(R_386_ext2): Replace R_386_IRELATIVE with R_386_GOT32X.
(elf_i386_reloc_type_lookup): Handle BFD_RELOC_386_GOT32X.
(need_convert_mov_to_lea): Renamed to ...
(need_convert_load): This.
(elf_i386_check_relocs): Handle R_386_GOT32X. Replace
need_convert_mov_to_lea with need_convert_load.
(elf_i386_gc_sweep_hook): Handle R_386_GOT32X.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_convert_mov_to_lea): Renamed to ...
(elf_i386_convert_load): This. Replace need_convert_mov_to_lea
with need_convert_load. Support R_386_GOT32X transformations.
* reloc.c (BFD_RELOC_386_GOT32X): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_386_GOT32X.
(tc_gen_reloc): Likewise.
(match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
(output_disp): Check for "call/jmp *mem", "mov mem, %reg",
"test %reg, mem" and "binop mem, %reg" where binop is one of
adc, add, and, cmp, or, sbb, sub, xor instructions. Set
fx_tcbit if the REX prefix is generated. Set fx_tcbit2 if
BFD_RELOC_386_GOT32X should be generated.
(i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
is set.
gas/testsuite/
* gas/i386/got.d: New file.
* gas/i386/got.s: Likewise.
* gas/i386/i386.exp: Run got.
* gas/i386/localpic.d: Replace R_386_GOT32 with R_386_GOT32X.
* gas/i386/mixed-mode-reloc32.d: Likewise.
* gas/i386/reloc32.d: Likewise.
include/elf/
* i386.h (R_386_GOT32X): New relocation.
ld/testsuite/
* ld-i386/branch1.d: New file.
* ld-i386/branch1.s: Likewise.
* ld-i386/call1.d: Likewise.
* ld-i386/call1.s: Likewise.
* ld-i386/call2.d: Likewise.
* ld-i386/call2.s: Likewise.
* ld-i386/got1.dd: Likewise.
* ld-i386/got1.out: Likewise.
* ld-i386/got1a.S: Likewise.
* ld-i386/got1b.c: Likewise.
* ld-i386/got1c.c: Likewise.
* ld-i386/got1d.S: Likewise.
* ld-i386/jmp1.d: Likewise.
* ld-i386/jmp1.s: Likewise.
* ld-i386/jmp2.d: Likewise.
* ld-i386/jmp2.s: Likewise.
* ld-i386/load1.d: Likewise.
* ld-i386/load1.s: Likewise.
* ld-i386/load2.d: Likewise.
* ld-i386/load2.s: Likewise.
* ld-i386/load3.d: Likewise.
* ld-i386/load3.s: Likewise.
* ld-i386/load4.s: Likewise.
* ld-i386/load4a.d: Likewise.
* ld-i386/load4b.d: Likewise.
* ld-i386/load5.s: Likewise.
* ld-i386/load5a.d: Likewise.
* ld-i386/load5b.d: Likewise.
* ld-i386/load6.d: Likewise.
* ld-i386/load6.s: Likewise.
* ld-i386/i386.exp: Run branch1, call1, call2, jmp1, jmp2,
load1, load2, load3, load4a, load4b, load5a, load5b and load6
tests. Run got1 test.
