* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
* Add bootloader size
Bootloader size needs to be 6144 to allow QMK to jump to the correct location with bootmagic
* Include dz60rgb v2.1
Add boot loader size to this pcb also
* Set bootloader to stm32-dfu for STM32F303
* Set bootloader to stm32-dfu for STM32F0x2
* Set bootloader to stm32-dfu for STM32F4x1
* Set bootloader to stm32duino for sowbug
* Delete redundant bootloader_defs headers
* Add some missing MCU name comments
* Move APM32 dfu-suffix overrides underneath bootloader
* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
* Create piv3rt's keymap
* Use tabs's LED as a caps lock indicator
* Fix indentation (tabs -> spaces)
* Set inital LED matrix color & mode
* Rename layers and add an RGBRST keycode
* Disable unused RGB effects
* Add RGB profiles
* Use ESC's LED as a num lock indicator
* Light up the keypad when _NUM layer is active
* Realign layers
* Remove legacy layer
* Fix CAPS key macro
* Reduce TAPPING_TERM to 100
* Change the caps LED to red and display the numlock one on special layers
* Add french accentuated caps + minor improvements on layers
* Remove left numpad
* Add french quotation marks
* Add key KC_NUBS
* Add terminal copy/paste
* Disable led profile on wakeup
* Change the default color
* Add AMD replay and record keys
* Add a MacOS layer
* Move Numpad
* Add GPLv2 license information
* Optimise custom RGB matrix
* Move keypad toggle and disable MAC led indicator
* Remove unnecessary check for RGB matrix
The keymap for this PCB as of April 5, 2020 has a 4rth, largely superfluous layer, creating a total of 5 layers.
When ported to VIA, this results in a layer that users can access but cannot edit. I propose removing this layer completely along with it's access from the default.
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* Tidy up dztech keyboard.c/h and readmes
* Use new lock LED function
* Undo changes to led flags
* Fix make examples
* Update readmes some more
* Clarify filetypes
* Format as list
* change LAYOUT_ANSI to LAYOUT_60_ansi
* change QMK Configurator layout to LAYOUT_60_ansi as well
* add 60_ansi support so I can make my userspace =)
* update readme
* Very strange. ISO keymap is still using 60_ansi LAYOUT macro. But then again....no ISO hottswap dz60 has been released
* Update keymap.c
Additional functionality added to layers.
* Error fix
Fixed missing key in layer 5, fixed brightness keys with universal codes, made code more readable.
* fix missing commas
fixed missing commas on line 19 and line 23
* fix Indicator LED sticking on RGB off toggle.
fixes issue: LED indicators stay on when toggling RGB off
* added personal CTRL keymap
* added personal dz60rgb keymap
* enabled new rgb effect
* added space cadet shift
* media player track buttons now orange
* updated keymaps with rgb setting and visual HSV setting preview
* fixed source stuff?
* added support for underglow toggle (bugged to all hell)
* everything now behaves as expected when ti comes to RGB toggles, thank god
* removed ifdefs
* changed color of MAS_CRM
* uh, whitespace
* changed rgb positions and modifiers within RGB matrix thing for CTRL and DZ60RGB
* updated keymap to work kindof
* KEYMAP: changed list of rgb effects
* changed CTRL rgb defaults
* KEYMAP: new LED layout for ctrl
* fixed white LED position in indicator
* changed capslock tap timing
* changed rgb positions and modifiers within RGB matrix thing for CTRL and DZ60RGB
* changed CTRL corner LEDs + centered horizontally
* whoops - changed CTRL's underglow LEDs back to the underglow flag
* whitespace
* I changed the right file this time
* Fixed DZ60RGB left shift out of position
* added personal CTRL keymap
* added personal dz60rgb keymap
* enabled new rgb effect
* added space cadet shift
* media player track buttons now orange
* updated keymaps with rgb setting and visual HSV setting preview
* fixed source stuff?
* added support for underglow toggle (bugged to all hell)
* everything now behaves as expected when ti comes to RGB toggles, thank god
* removed ifdefs
* changed color of MAS_CRM
* uh, whitespace
* changed rgb positions and modifiers within RGB matrix thing for CTRL and DZ60RGB
* updated keymap to work kindof
* KEYMAP: changed list of rgb effects
* changed CTRL rgb defaults
* KEYMAP: new LED layout for ctrl
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
