Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)

* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
This commit is contained in:
Ryan 2021-06-08 19:48:46 +10:00 committed by GitHub
parent e0acd3e53d
commit 9dcd03b6ca
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
178 changed files with 556 additions and 209 deletions

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
## Features
CONSOLE_ENABLE = yes
ENCODER_ENABLE = yes

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,8 +1,10 @@
# MCU name
MCU = STM32F042
BOARD = ST_NUCLEO32_F042K6
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F072
BOARD = GENERIC_STM32_F072XB
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,10 @@
# MCU name
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#
@ -16,4 +20,3 @@ RGBLIGHT_ENABLE = no
TAP_DANCE_ENABLE = no
UNICODE_ENABLE = no
UNICODEMAP_ENABLE = yes

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F303
BOARD = QMK_PROTON_C
BOOTLOADER =
# Bootloader selection
BOOTLOADER = stm32-dfu
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -20,8 +26,5 @@ WS2812_DRIVER = spi
LAYOUTS = 60_ansi 60_tsangan_hhkb
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,6 +1,9 @@
# MCU Name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -15,9 +21,6 @@ BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
DEFAULT_FOLDER = cannonkeys/db60/rev2
# Enter lower-power sleep mode when on the ChibiOS idle thread

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -16,8 +22,5 @@ BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -19,8 +25,5 @@ WS2812_DRIVER = spi
LAYOUTS = 60_ansi 60_tsangan_hhkb
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# change yes to no to disable
#
@ -21,6 +27,3 @@ WS2812_DRIVER = spi
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# change yes to no to disable
#
@ -18,8 +24,5 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
WS2812_DRIVER = spi
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# change yes to no to disable
#
@ -18,8 +24,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -15,8 +21,5 @@ CUSTOM_MATRIX = no # Custom matrix file
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = no
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,8 +1,11 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# change yes to no to disable

View file

@ -1,5 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

View file

@ -2,6 +2,12 @@
MCU = STM32F072
BOARD = GENERIC_STM32_F072XB
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -25,8 +31,5 @@ QWIIC_DRIVERS += MICRO_OLED
DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -21,7 +27,4 @@ WS2812_DRIVER = spi
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_ansi_blocker_tsangan 65_iso_blocker

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# comment out to disable the options.
#
@ -20,6 +26,3 @@ WS2812_DRIVER = spi
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF

View file

@ -1,6 +1,12 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF
# Build Options
# change yes to no to disable
#
@ -19,8 +25,5 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
WS2812_DRIVER = spi
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -p FFFF -v FFFF
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F042
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
@ -15,4 +18,4 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
AUDIO_ENABLE = no # Audio output

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F042
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
@ -15,4 +18,4 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
AUDIO_ENABLE = no # Audio output

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -19,12 +19,6 @@
#include "config_common.h"
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* Backlight configuration
*/
#define BACKLIGHT_LEVELS 1

View file

@ -2,12 +2,6 @@
#include "config_common.h"
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* Backlight configuration
*/
#define BACKLIGHT_LEVELS 1

View file

@ -18,12 +18,6 @@
#pragma once
#include "config_common.h"
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
// #define DEBOUNCE 6

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F072
BOARD = GENERIC_STM32_F072XB
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,9 @@
# MCU Name
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,9 +1,11 @@
# MCU name
# Actually F070, but close enough
MCU = STM32F072
BOARD = DURGOD_STM32_F070
# Bootloader selection
BOOTLOADER = stm32-dfu
# Do not put the microcontroller into power saving mode
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F303
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -25,12 +25,6 @@
#define MANUFACTURER John M Daly
#define PRODUCT CO60 rev6
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -26,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MANUFACTURER John M Daly
#define PRODUCT CO60 rev7
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Use SPI for RGB underglow:
WS2812_DRIVER = spi

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@ -15,4 +18,4 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: h
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = yes # Audio output on port C6
UNICODE_ENABLE = no # Unicode
UNICODE_ENABLE = no # Unicode

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,8 +1,8 @@
# MCU name
MCU = STM32F401
# Address of the bootloader in system memory
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable

View file

@ -1,8 +1,8 @@
# MCU name
MCU = STM32F411
# Address of the bootloader in system memory
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable

View file

@ -1,10 +1,10 @@
# MCU name
MCU = STM32F411
# Bootloader selection
BOOTLOADER = tinyuf2
# Build Options
# change yes to no to disable
#
KEYBOARD_SHARED_EP = yes
# We want to use the tinyuf2 bootloader...
BOOTLOADER = tinyuf2

View file

@ -1,3 +1,6 @@
# MCU name
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu

View file

@ -1,6 +1,8 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F401
# Address of the bootloader in system memory
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 0483:DF11 -a 0 -s 0x08000000:leave
DFU_SUFFIX_ARGS = -v 0483 -p DF11
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable

View file

@ -1,12 +1,8 @@
# MCU name
MCU = STM32F411
# Address of the bootloader in system memory
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 0483:DF11 -a 0 -s 0x08000000:leave
DFU_SUFFIX_ARGS = -v 0483 -p DF11
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable

View file

@ -1,8 +1,8 @@
# MCU name
MCU = STM32F401
# Address of the bootloader in system memory
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable

View file

@ -1,8 +1,8 @@
# MCU name
MCU = STM32F411
# Address of the bootloader in system memory
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -26,12 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MANUFACTURER John M Daly
#define PRODUCT SteamVan rev1
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Use SPI for RGB underglow:
WS2812_DRIVER = spi

View file

@ -1,3 +1,4 @@
# MCU name
MCU = STM32F103
# Bootloader selection

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# comment out to disable the options.
#

View file

@ -1,3 +1,4 @@
# MCU name
MCU = STM32F103
# Bootloader selection

View file

@ -3,7 +3,7 @@ MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = atmel-dfu
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
@ -20,4 +20,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
AUDIO_ENABLE = no # Audio output

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -2,6 +2,9 @@
MCU = STM32F303
BOARD = QMK_PROTON_C
# Bootloader selection
BOOTLOADER = stm32-dfu
BACKLIGHT_ENABLE = no
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

View file

@ -1,6 +1,9 @@
# MCU name
MCU = STM32F072
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#

Some files were not shown because too many files have changed in this diff Show more