qmk_firmware/keyboards/dztech/dz60rgb
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps piv3rt keymap for dztech/dz60rgb (#12591) 2021-05-12 23:52:55 -07:00
v1 Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
v2 Remove FAUXCLICKY feature (deprecated) (#11829) 2021-02-09 09:49:05 -08:00
config.h Tidy up dztech config.h 2019-12-18 10:23:26 +11:00
dz60rgb.c Fix compilation warning for the DZ60RGB/DZ65RGB when RGB matrix is disabled (#9791) 2020-07-22 15:55:35 +10:00
dz60rgb.h Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00
info.json
readme.md Tidy up dztech keyboard.c/h and readmes (#7664) 2020-01-14 08:49:31 +11:00

DZ60RGB

dz60rgb

A hotswap 60% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZtech DZ60RGB V1 and V2
  • Hardware Availability: KBDfans

There are two versions of the DZ60RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files

Make example for this keyboard (after setting up your build environment):

make dztech/dz60rgb/v1:default # Arm (STM32F303)
make dztech/dz60rgb/v2:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.