* listing.c: Call xmalloc, not malloc; don't declare malloc.
* Changes to support SCO 3.2v4:
* read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
SEG_BSS, fill with NOP_OPCODE.
* config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
* config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
using ZERO_BASED_SEGMENTS.
(fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
never set segment address for SEG_E2 (.bss) and don't write out
SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
(obj_coff_endef): Don't merge labels or symbols awaiting forward
definitions, and don't merge tags with non-tags. Check for .bf
rather than just checking whether the second character is b and
the third character is f.
(obj_coff_val): gcc can generate values which we don't handle
correctly; discard information for now, since it only affects the
debugging information.
(tag_find_or_name): Don't insert tags in the symbol table.
(yank_symbols): Don't merge labels.
(write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
set segment address if ZERO_BASED_SEGMENTS.
(obj_coff_section): Accept and ignore a trailing quoted string, as
used in AT&T i386 syntax.
(fixup_segment): Take segment as argument. On the i386, adjust PC
relative addends by the segment vaddr.
* tc-i386.h: Define SUB_SEGMENT_ALIGN.
* tc-a29k.h: Define ZERO_BASED_SEGMENTS.
* tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
Removed some unneeded files.
obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
tc-m68k.c (md_assemble): 68000+68881 is okay -- could be emulating.
p3 into devo.
* tc-m68k.c (m68k_reg_parse): If REGISTER_PREFIX isn't defined,
still accept (but don't require) OPTIONAL_REGISTER_PREFIX before
the register name.
* tc-m68k.h (OPTIONAL_REGISTER_PREFIX): Define to be "%", if not
M68KCOFF.
support when using /opt/SUNWspro/SC2.0/acc.
Tue Nov 10 09:50:25 1992 Ian Lance Taylor (ian@cygnus.com)
* obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
section.
* atof-ieee.c, atof-ns32k.c, tc-*.c: made EXP_CHARS, FLT_CHARS,
comment_chars, line_comment_chars and line_seperator_chars
consistently const, and always initialized them. Included read.h.
* Support for i386-sysv.
obj-coffbfd.c (do_relocs_for, write_object_file): set segment
addresses to reasonable sizes. New define ZERO_BASED_SEGMENTS can
be used to set them all to zero as was done before.
(fill_section): segment addresses now set in write_object_file.
(fill_section): Don't set STYP_NOLOAD for .bss section.
(fixup_segment): 386 uses strange common symbol format.
tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
compatibility with SVR3.2 linker.
* obj-coff.c (c_dot_file_symbol, obj_coff_ln, obj_coff_line):
support for C source listings. (obj_coff_endef): look in the right
part of the symbol for the symbol name
* tc-i960.h, tc-i960.c: avoid the ANSI preprocessor addition
#elif, since it is not supported by old compilers.
ho-rs6000.h, tc-m68k.c: the native RS/6000 compiler miscompiles a
couple of expressions in tc-m68k.c.
* tc-m68k.h: if M68KCOFF, define DOT_LABEL_PREFIX (to require
local labels to start with a .) and set REGISTER_PREFIX to %.
tc-m68k.c (m68k_reg_parse): accept REGISTER_PREFIX if defined.
* obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
sections starting from zero, rather than making them consecutive.
This makes subsequent reloc calculations easier, esp if the
object format doesn't understand addends. (obj_coff_lcomm): (maybe
temporarily) allocate lcomm in .data rather than in .bss. It
seems that some tools can't cope with a non-zero sized bss
before linkage.
* tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
Motorola and MIT syntax; gas can now assemble either type of
file.
tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
From Steve Chamberlain:
m68kcoff.mt: for m68k COFF.
obj-coffbfd.c: (fixup_mdeps) added
(size_section) removed bad sanity check
(fill_section) added rs_machine_dependent case
(write_object_file) call fixup_mdeps
(fixup_segment) set fx_subsy to 0.
obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
handle m68k.
tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
pseudo ops.
* obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
tc-i960.c (md_ri_to_chars): Always output bout object file in
little endian byte order (used to use endianness of host).
data, so that "bc" is available to 68040 cache instructions. Added
"tt0", "tt1", and 68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith (colin@wrs.com):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than
install_operand.
* tc-m68k.c: use TARGET_CPU to choose default cpu type.
* te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
so that we can assemble hand-written libgcc code.
Wed Aug 19 11:20:59 1992 Ian Lance Taylor (ian@cygnus.com)
* tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
written with indirection on the last two operands, which can be
either data or address registers. Added a new operand type 'r'
which accepts either register type. Added '(' to notend stuff in
tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
assembling for an older CPU than a 68020.
This bug was found at Adobe because GAS did not diagnose incorrect
68020 code generated by GCC when compiling for 68010. We had to debug it
in the target system as failing instructions.
processor/opcode mismatch, so reword the error message.
(md_assemble): If no CPU has been set (even if FPU/PMMU
characteristics have been), default to 68020. Don't need extra
quotes around error string.
* read.c (potable): align should be nbytes, not ptwo!
* write.c (write_object_file): extra glue for new bss attributes
(relax_segment): SEG_BSS is ok now
* config/tc-m68k.c (m68k_ip_op): can now parse more @( modes
* app.c (process_escape): new function to handle escapes the right
way, (do_scrub_next_char): use new function
* cond.c (s_ifdef): do ifdef/ifndef right
* read.c (s_fill): make the , expressions optional like the doc
says
* config/tc-h8300.[ch]: better warnings
* tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
it into SEG_BSS
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
* as.c: fix typo recently introduced.
* as.h : Don't include aout/reloc.h - it's not right for COFF!
* expr.c: Much rewriting, to accomodate MRI syntax for
expressions. Also easier to read now.
* listing.c: Put back defuns
* read.c: modified to accept MRI syntax, put back listing pseudo
ops so that an assembler built with NO_LISTING ignores list ops
rather than pukes.
* write.c, write.h: fixs - only keep a reloc type in a fix if the target
machine is a SPARC or a 29K.
* config/obj-aout.c: added s_sect pseudo op
* config/obj-coffbfd.c: lints, set the filehdr flags right and
fill in the timestamp.
* config/obj-coffbfd.h: Since we don't include aout/reloc.h
anymore, define all the relocs which the tc-<x> bit will use so we
can translate from them to the coff types.
* config/tc-a29k.c: reloc_type isn't ane enum any more
* config/tc-m68k.c: Added NO_RELOC definition.
Now compiles for sparc aout, 68k aout (MRI and MIT syntax),
29k coff.
So far works as replacement for sparc and 68k /bin/as.
with GCC, the compiler does not stumble over `size_t', `ptrdiff_t',
and `wchar_t'. Also note that the comment in <stddef.h> says that we
have to #include <sys/stdtypes.h> before including <stddef.h> when on
a sun.
* listing.c,listing.h: support for new listings, and more for forgiving
when lied to about where linenumbers are.
* config/obj-coffbfd.c (do_linenos_for): relocate line numbers
correctly.
command line option.
* listing.h, listing.c: now prints addresses with ??? instead of 0 when
errors in assemble prevent addresses being known. Prints
symbol table more tidily. Allows different parts of the
listing to be selected.
* config/tc-h8300.c, config/tc-h8300.h: Too Many bug fixes
* config/tc-m68k.h, config/tc-sparc.h: Override default
listing options to give better effect.
* output-file.c (output_file_create, output_file_close) added
stuff to use bfd.
* write.c: more bfd support
* config/obj-coff.c config/obj-coff.h use bfd for swapping
header info.
* tc-a29k: added the reloc types we support now.
