* configure.tgt: Recognize the 68hc11.
* m68hc11-tdep.c: New file for 68hc11 target.
* config/m68hc11/m68hc11.mt: New file for 68hc11 port.
* configure.tgt: When 68hc11, set gdb_multi_arch.
* sh-tdep.c (sh_sh4_register_name, sh_sh4_register_byte,
sh_sh4_register_raw_size, sh_sh4_register_virtual_type,
sh_fetch_pseudo_register, sh_store_pseudo_register,
sh_do_pseudo_register, sh_gdbarch_init): Fix names for pseudoregs,
they should be numbered as drx fvy where x and y are multiples of
2 and 4 respectively.
* config/sh/tm-sh.h: Fix names of pseudo regs.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add sh4 specific
pseudo registers.
(DO_REGISTERS_INFO): Define.
* sh-tdep.c (sh_sh4_register_name): New function.
(sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update
signature.
(sh_show_regs_command): New function. Actual function called by
the 'regs' command.
(sh_register_byte): Rename to...
(sh_default_register_byte): ...New function.
(sh_sh4_register_byte): New function.
(sh_register_raw_size): Rename to...
(sh_default_register_raw_size): ...New function.
(sh_sh4_register_raw_size): New function.
(sh_sh4_register_virtual_type): New function.
(sh_sh4_build_float_register_type): New function.
(sh_fetch_pseudo_register, sh_store_pseudo_register): New
functions.
(fv_reg_base_num, dr_reg_base_num): New functions.
(do_fv_register_info, do_dr_register_info, sh_do_pseudo_register,
sh_do_fp_register, sh_do_register, sh_print_register,
sh_do_registers_info): New functions.
(sh_gdbarch_init): Initialize sh4 pseudo registers to -1. Update
architecture specific parts.
(_initialize_sh_tdep): Use sh_show_regs_command for 'regs' command.
* config/i386/tm-i386.h: treat PC and FP as unsigned.
(SAVED_PC_AFTER_CALL): Use read_memory_unsigned_integer.
(FRAME_SAVED_PC): Ditto.
(FRAME_CHAIN): Ditto.
* rs6000-tdep.c (DEFAULT_LR_SAVE): Move to config/*/tm-*.h.
(rs6000_gdbarch_init): Use generic_pc_in_call_dummy instead of
rs6000_pc_in_call_dummy.
* config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Move here from
rs6000-tdep.c.
* config/powerpc/tm-ppc-eabi.h: Remove various definitions
handled by multi-arched rs6000-tdep.c.
* config/sh/tm-sh.h (STORE_RETURN_VALUE): Redefine as
sh_store_return_value().
* sh-tdep.c (sh_store_return_value): New function. Store the
value returned by a function into the appropriate register.
2000-07-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* sh-tdep.c (sh_skip_prologue): Before looking at the actual
instructions, try to see if the symbol table can be of help, by
calling after_prologue(). If this doesn't work, call
skip_prologue_hard_way().
(skip_prologue_hard_way): Renamed from sh_skip_prologue. Add some
more instruction pattern matching for pushing of arguments, and
manipulation of r14.
(after_prologue): New function. Use symbol table info to determine
the end of the prologue, if possible.
support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
(FIX_CALL_DUMMY): Redefined to call i386_fix_call_dummy.
(i386_fix_call_dummy): Add prototype.
* i386-tdep.c (i386_fix_call_dummy): New function based on the
code from the old FIX_CALL_DUMMY macro.
* config/i386/tm-embed.h: New file. Specific for embedded targets
like i386-elf, i386-coff and i386-aout.
* config/i386/embed.mt (): Specify tm-embed.h instead of the System V
header file.
before deleting and restoring it.
(safe_symbol_file_add): Ensure that gdb_stderr is flushed before reassigning
it.
(handle_load_dll): Split into two functions so that WFI can handle shared
library events.
(child_solib_loaded_library_pathname): New function.
(child_clear_solibs): New function. Clears shared library list.
(child_solib_add): New function. Adds shared library symbols.
(dll_symbol_command): New function. Handles "dll-symbol" command.
(info_dll_command): New function. Handles info "sharedlibrary" command.
(handle_exceptions): Eliminate 'ignore_trap' argument.
(get_child_debug_event): Eliminate two arguments. Return "pid" when
appropriate. Break out on most events to allow WFI to handle stuff.
(child_wait): Accomodate get_child_debug_event changes.
(child_attach): Clear thread list and list of loaded dlls.
(child_create_inferior): Clear list of loaded dlls. Use wait_for_inferior in a
loop to look for first "trap".
(child_resume): Avoid accessing a possibly-freed thread pointer.
(_initialize_inftarg): Add "dll-symbols", "sharedlibrary", and "info
dll", and "info sharedlibrary" commands.
* config/i386/tm-cygwin.h: Add some shared library (aka DLL) hooks.
* config/i386/nbsdelf.mt: New file.
* config/i386/tm-nbsdelf.h: New file.
* config/i386/tm-nbsd.h: change include of tm-nbsd.h to
the more explicit config/tm-nbsd.h.
and i[3456]86-*-netbsdelf*.
* config/i386/nm-nbsdelf.h: New file.
* config/i386/nbsdelf.mh: New file.
* config/i386/nm-nbsd.h: change include of nm-nbsd.h to
the more explicit config/nm-nbsd.h.
* config/i386/tm-nbsd.h: change include of tm-i386bsd.h to
tm-i386.h.
(SIGTRAMP_START, SIGTRAMP_END, SIGCONTEXT_PC_OFFSET): Define.
-------------------------------------------------------------------
* gregset.h: New file. Typedefs for gdb_gregset_t and
gdb_fpregset_t, prototypes for supply_gregset and friends.
* procfs.c: Include gregset.h. Delete local prototypes for
supply_gregset etc., and local typedef gdb_gregset_t etc.
* sol-thread.c: Include gregset.h, delete local prototypes,
add appropriate casts to gdb_gregset_t.
* uw-thread.c, lin-thread.c, core-sol2.c, core-regset.c,
sparc-tdep.c, ptx4-nat.c, ppc-linux-nat.c, mipsv4-nat.c,
m88k-nat.c, m68klinux-nat.c, m68k-tdep.c, irix5-nat.c,
irix4-nat.c, ia64-linux-nat.c, i386v4-nat.c, cxux-nat.c,
arm-linux-nat.c, alpha-nat.c: Include gregset.h.
* config/nm-linux.h: Define GDB_GREGSET_T, GDB_FPREGET_T.
* config/sparc/tm-sun4sol2.h: Ditto.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
Make Sparc a Multi-Arch target. Discard PARAMS macro (require ANSI).
* sparc-tdep.c: include arch-utils.h.
(SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
(GDB_TARGET_IS_SPARC64): make into a runtime test.
(struct frame_extra_info): Define, use instead of the macro.
(Many places): Use alloca instead of statically allocated buffers
that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
(sparc_extract_struct_value_address): Accept a pointer arg instead
of an array sized by REGISTER_BYTES.
(examine_prologue): Accept a pointer to an array of CORE_ADDR,
instead of the defunct struct frame_saved_regs. Recognize new
Sparc64 store instructions as part of the prologue. Ignore the
destination of a frame store when parsing the prologue (so long
as it's on the stack).
(sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
(sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
instead of the defunct struct frame_saved_regs.
(supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
supply_register. Provide 4-byte offset to compensate for diff
between size of the prgreg_t elements on a 64-bit host and size
of the registers for a 32-bit target. Fill all inaccessible regs
with zero so they won't keep being requested again and again.
(fill_gregset): Handle 32/64 size difference between registers
and prgreg_t. Handle as many new 64-bit regs as possible.
(supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
(sparc_push_arguments): Rename to sparc32_push_arguments.
Copy arguments into registers as well as onto stack, so that the
CALL_DUMMY (code pushed onto the target stack) is not required.
(sparc_extract_return_value): Rename to sparc32_extract_return_value.
(sparc_store_return_value): Use memset instead of bzero.
Use write_register_gen instead of write_register_bytes.
(sparclet_store_return_value): New function.
(_initialize_sparc_tdep): Call register_gdbarch_init to activate
the gdbarch multi-architecture system.
(sp64_push_arguments): Rename to sparc64_push_arguments.
Extend to store arguments in general registers as well as on stack.
(sparc64_extract_return_value): Rename to sp64_extract_return_value.
Use as a private function, to be called by the new external function
sparc64_extract_return_value.
(sparclet_extract_return_value): New function.
(sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
sparc64_register_name, sparc_print_extra_frame_info,
sparclite_register_name, sparclet_register_name,
sparc_push_return_address, sparc64_use_struct_convention,
sparc32_store_struct_return, sparc64_store_struct_return,
sparc32_register_virtual_type, sparc64_register_virtual_type,
sparc32_register_size, sparc64_register_size,
sparc32_register_byte, sparc64_register_byte,
sparc_gdbarch_skip_prologue, sparc_convert_to_virtual,
sparc_convert_to_raw, sparc_frame_init_saved_regs,
sparc_frame_address, sparc_gdbarch_fix_call_dummy,
sparc_coerce_float_to_double, sparc_call_dummy_address,
sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
sparc_return_value_on_stack): New functions supporting multi-arch.
(sparc_gdbarch_init): New function; initialize multi-arch.
(struct gdbarch_tdep): Define, use for private multi-arch data.
* config/sparc/tm-sparc.h: Move definitions around, enclose with
#ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
definitions. Add enums for register names, to help debugging gdb.
This header file must work for non-multi-arch and for multi-arch.
* config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration. Also add
AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
Define GDB_MULTI_ARCH.
* config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
* config/sparc/tm-sparclite.h: Ditto.
* config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
* sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
avoid using deprecated REGISTER_NAMES macro.
* Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
with the version name.
* config/djgpp/djconfig.sh: Use more warning switches.
* config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
@V@ placebo.
(mempool): Just free any buffer prior to reuse. Don't bother with realloc.
(flag_single_step): New function.
(skip_message): Detect "helpful" Windows CE messages and skip sending them to
the host.
(wait_for_debug_event): Use skip_message to avoid sending debug messages to the
host.
(dispatch): Prelimary implementation of single step detection.
* wince.c: Rework SH single stepping code to be more consistent with other
wince targets.
(handle_output_debug_string): Allow first chance exceptions to come through
since they seem to be all that we get on some versions of Windows CE.
(check_for_step): New function, conditionally compiled based on target.
(regptr): Delete obsolete function.
(handle_exception): Detect illegal instructions.
(get_child_debug_event): Return success only if event code matches target.
(child_create_inferior): Reflect change to get_child_debug_event arguments.
2000-04-20 Scott Bambrough <scottb@netwinder.org>
* arm-linux-nat.c (PIDGET, TIDGET): New.
(get_thread_id, GET_THREAD_ID): New.
(fetch_nwfpe_register, store_nwfpe_register): New.
(fetch_register, store_register): New.
(fetch_fpregister, store_fpregister): New.
(fill_gregset, supply_gregset): New.
(fill_fpregset, supply_fpregset): New.
(fetch_fpregs): Modified to use thread id's.
(store_fpregs): Modified to use thread id's and
fetch_nwfpe_register.
(fetch_regs): Modified to use thread id's.
(store_regs): Modified to use thread id's.
(fetch_inferior_registers): Modified to handle single register
fetches.
(store_inferior_registers): Modified to handle single register
stores.
(arm_linux_register_u_addr): Removed.
* configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.
* config/arm/linux.mh
(NATDEPFILES): Removed core-aout.o. Added core-regset.o.
(LOADLIBES): Define.
* config/arm/nm-linux.h: Include config/nm-linux.h.
(ATTACH_DETACH): Removed. Defined in config/nm-linux.h.
(REGISTER_U_ADDR): Removed.
(SVR4_SHARED_LIBS): Removed. Defined in config/nm-linux.h.
(#include "solib.h"): Removed. Included via config/nm-linux.h.
* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
* config/i386/tm-i386sol2.h (HAVE_I387_REGS): Define.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Add code
to handle floating point registers if NUM_FREGS is not zero.
* ChangeLog: Correct date on last entry.
* arm-linux-tdep.c (arm_linux_push_arguments): New function.
* config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.
* config/arm/tm-embed: Fix build warning from redefinition of
LOWEST_PC.
* config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
* config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and
TARGET_BYTE_ORDER. Add TARGET_BYTE_ORDER_SELECTABLE_P to
override default in tm-arm.h. Use default target byte order
from tm-arm.h.
Change to rely on PIDGET etc.
* config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
define. Allow target to use procfs hardware watchpoints.
* config/sparc/nm-sun4sol2.h: ditto.
* config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
definitions to use 16 bits for the pid, 15 bits for the tid, and
1 bit for the flag.
* config/sparc/tm-sun4sol2.h: ditto.
(SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
* testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
for more than 15 thread increments.
dependencies. Created ARM Linux specific arm-linux-tdep.c file and moved
missing code into it from arm-linux-nat.c.
2000-04-05 Scott Bambrough <scottb@netwinder.org>
* arm-linux-tdep.c: New file.
* arm-linux-nat.c (fetch_fpregs): Remove unused code.
(arm_get_longjmp_target): Moved it and all defines
it uses to arm-linux-tdep.c.
(arm_linux_extract_return_value): Moved to
arm-linux-tdep.c.
* config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
* config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
definition (and use the common one in tm-i386.h).
(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
(I386_DJGPP_TARGET): Don't define, it's no longer required.
(LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
i386-tdep.c defines it for all x86 targets.
(LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
* config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
* config/djgpp/djcheck.sh: Edit the copyright year out of the test
results. Fix editing of `main' arguments for non-GNU Sed.
and P_LINK_W.
(P_PEA_FP, P_MOVL_SP_FP): New macros.
(P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
P_MOVM_L.
(altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
constants.
(delta68_in_sigtramp): New function.
(delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
(m68k_skip_prologue): Use P_* macros, not hex constants.
(m68k_find_saved_regs): Do not expect a fixed sequence of register save
instructions, but accept them in any order; use P_* macros, not octal
or hex constants; recognize also `fmovemx to (fp + displacement)' and
`moveml to (fp + displacement)'.
* m68/tm-delta68.h (IN_SIGTRAMP): New macro.
(FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
* config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
* config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
Remove
* i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
(i386_extract_return_value): Rewritten. Correctly support all
floating-point types and large integer types on targets that use
the standard i386 GDB register layout and return floating-point
values in the FPU.
(LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed
out that these are target-dependent, and useful in non-native
configurations. Moved to...
* i386-linux-tdep.c: ... Here, a new file.
* Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
(i386-linux-tdep.o): New rule.
(i386-linux-nat.o): We no longer depend on frame.h.
* config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
* event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
Print an error at compile time if we are to use select, but FD_SET
is not available.
(SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
if HAVE_POLL is not defined and NO_FD_SET *is* defined.
(create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
(delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
(gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
instead of using memcpy and memset. Use FD_ISSET.
* config/i386/xm-go32.h (fd_mask): Remove typedef.
it:
* config/djgpp/djconfig.sh: New file.
* config/djgpp/config.sed: New file.
* config/djgpp/README: New file.
* config/djgpp/fnchange.lst: New file.
* config/djgpp/djcheck.sh: New file.
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. These all implement
Linux-specific signal trampoline detection, and should be moved to...
* i386-linux-nat.c: ... here.
* config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
this any more, since we're not enabling OS-specific code in a
OS-independent file.
Allow GDB to run on Linux 2.0 again.
* config.in: Add HAVE_PTRACE_GETREGS.
* configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
* configure: Regenerated.
* config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
CANNOT_STORE_REGISTER): New defines.
* i386-linux-nat.c (have_ptrace_getregs): New variable.
(PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
store_register, old_store_inferior_registers): Copied over from
`inptrace.c' as a temporary measure.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs):
Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if
HAVE_PTRACE_GETREGS isn't defined.
(fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
with EIO.
(fetch_inferior_registers, store_inferior_registers): Fall back on
the method use in `infptrace.c' (by calling
old_fetch_inferior_registers and old_store_inferior_registers) if
`have_ptrace_getregs' isn't set.
Fix support for Linux/i386 signal trampolines. The old approach
didn't work for Linux 2.2 and beyond, and didn't work with recent
versions of the GNU C library.
* i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
(linux_rt_sigtramp_code): New variable.
(LINUX_RT_SIGTRAMP_LEN): New define.
(i386_linux_rt_sigtramp_start): New function. Detect start of
signal trampolines for RT signals.
(i386_linux_sigtramp): Removed.
(i386_linux_in_sigtramp): New function.
(i386_linux_sigcontext_addr): New function. Recognize the names
of the signal tranmpolines used by recent versions of the GNU C
library, and add support for RT signals.
(LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET): New
defines. Moved here from config/i386/tm-linux.h.
(i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
Reimplement in terms of i386_linux_sigcontext_addr.
* config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
(LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
Moved to i386-tdep.c.
(IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.
* config/arm/linux.mh (NATDEPFILES): Removed core-regset.o.
Not used. Required to get GDB to build on glibc 2.1.3.
* config/arm/tm-linux.h (LOWEST_PC): Undefine LOWEST_PC
before redefining. Gets rid of compiler warning.
Make cross-compilation for the Hurd more friendly.
From Jeff Bailey <jbailey@gnu.org>:
* configure.in: Use AC_CHECK_TOOL to find MiG.
* Makefile.in (MIG): New variable.
* config/i386/i386gnu.mh (MIG): Remove.
* configure: Regenerated.
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
* gdb/config/i386/windows.mh,
gdb/doc/GDBvn.texi, gdb/doc/remote.texi,
gdb/testsuite/gdb.base/README, gdb/testsuite/gdb.base/crossload.exp,
gdb/testsuite/gdb.base/i486-elf.u, gdb/testsuite/gdb.base/i860-elf.u,
gdb/testsuite/gdb.base/m68k-aout.u,
gdb/testsuite/gdb.base/m68k-aout2.u,
gdb/testsuite/gdb.base/m68k-elf.u, gdb/testsuite/gdb.base/mips-ecoff.u,
gdb/testsuite/gdb.base/sparc-aout.u,
gdb/testsuite/gdb.base/sparc-elf.u,
gdb/tui/Makefile,
readline/ChangeLog: These files have been removed over the course
of the last year, but weren't cvs removed from the old GDB repository
on sourceware.
v850_register_names, v850_processor_type_table): Declare tables
and structures for handling differences in register names for
v850 and v850e.
(struct reg_list): Define new structure for creating tables
of register bit masks in v850e instrutions.
(handle_prepare, handle_pushm): New helpers for v850_scan_prologue.
(v850_scan_prologue): Recognize v850e instructions: callt, prepare,
and pushm.
(v850_target_architecture_hook): New function to set register
names based on current machine.
(_initialize_v850_tdep): Set up target_architecture_hook.
* config/v850/tm-v850.h (v850_register_names): Declare.
(REGISTER_NAME): Define to refer to v850_register_names.
(SR0_REGNUM, CTBP_REGNUM): Define.
(PS_REGNUM): Redefine in terms of SR0_REGNUM.
* h8300-tdep.c (original_register_names, h8300h_register_names,
h8300_register_names): Define new variables.
(set_register_names): New function to set register names based on
current CPU type.
(h8300_command, h8300h_command, h8300s_command): Call
set_register_names.
* config/h8300/tm-h8300.h (h8300_register_names): Declare.
(REGISTER_NAME): Define to refer to h8300_register_names.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE,
TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P,
TARGET_BYTE_ORDER so that they can all be overriden.
Document.
Convert mn10300 and PPC targets.
Add two pointers (saved_regs, extra_info) to struct frame_info.
Introduce new macro FRAME_INIT_SAVED_REGS which replaces
FRAME_FIND_SAVED_REGS.
Document.
Use in mn10300 and rs6000 targets. Fix side effects on ALPHA, MIPS,
Z8K and SPARC targets.
* config/xm-aix4.h (SIGWINCH_HANDLER): Function `aix_resize_window'
must accept a signal number as parameter.
* config/rs6000/xm-rs6000.h (SIGWINCH_HANDLER): Ditto.
* utils.c (initialize_utils): Give a parameter to `SIGWINCH_HANDLER'.
* inferior.h (register_valid): Variable's type is `SIGNED char', not
`char'.
* findvar.c (register_valid): Ditto.
* defs.h (make_cleanup_func): Protect parameter list by `PARAMS'.
* gdbthread.h (unbind_target_thread_vector): Likewise.
* config/m68k/tm-m68k.h (NUM_FREGS): m68k-linux patch.
Added NUM_FREGS macro.
* config/m68k/xm-linux.h: m68k-linux patch. New file.
* config/m68k/tm-linux.h: m68k-linux patch. New file.
* config/m68k/nm-linux.h: m68k-linux patch. New file.
* config/m68k/linux.mt: m68k-linux patch. New file.
* config/m68k/linux.mh: m68k-linux patch. New file.
* gdbserver/low-linux.c: m68k-linux patch. Added an ifdef
that checks the value of __GLIBC to decide whether or
not to include sys/reg.h.
* m68klinux-nat.c: m68k-linux patch. New file. Note
both m68k-tdep.c and m68klinux-nat.c contain definitions
for supply_gregset and supply_fpregset. The definitions
in m68k-tdep.c are valid is USE_PROC_FS is defined. Otherwise,
the definitions in m68klinux-nat.c will be used. This is a
bit of a hack. The supply_* routines do not belong in
*_tdep.c files. But, there are several lynx ports that currently
depend on these definitions.
* configure.tgt: m68k-linux patch. Added m68*-*-linux*
gdb_target.
* configure.host: m68k-linux patch. Added m68*-*-linux*
gdb_host.
* Makefile.in: m68k-linux patch. Added compile line for
m68klinux-nat.o
* config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition.
* config/powerpc/xm-cygwin.h: Ditto.
PR 17664.
With this define in place, you can't type "q" to get out of GDB's pager
under Cygwin.
the stack frame. Their offset from the previous stack frame is in
fdata.gpr_offset and fdata.fpr_offset, not fdata.offset.
(gdb.base/return.exp)
* config/rs6000/tm-rs6000.h: Doc fixes.
* config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER):
new target macro.
* mn10300-tdep.c (mn10300_virtual_frame_pointer): new function.
* tracepoint.c (encode_actions): Use the new target macro to
determine the virtual frame pointer, for collecting locals/args.
(add_local_symbols, collect_symbol): add a register/offset pair of
arguments so that the virtual frame pointer can be passed in.
Convert mn10300, MIPS and powerpc/rs6000 targets to use
BREAKPOINT_FROM_PC
Delete global variable memory_breakpoint_size. Use BREAKPOINT_FROM_PC
instead.
without NAT_FILE definition, configure will assume that GDB cannot
run native.
* config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro.
* delta68-nat.c (kernel_u_size): New function.
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
which define CRLF_SOURCE_FILES.
* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
a running process, and 3) implement limited support for cygwin
signals.
(thread_rec): New function.
(child_add_thread): Ditto.
(child_init_thread_list): Ditto.
(child_delete_thread): Ditto.
(do_child_fetch_inferior_registers): Ditto.
(do_child_store_inferior_registers): Ditto.
(handle_output_debug_string): Ditto.
(child_fetch_inferior_registers): Use do_* function to perform
operation.
(child_store_inferior_registers): Ditto.
(child_continue): Ditto.
(child_thread_alive): Ditto.
(cygwin_pid_to_str): Ditto.
(handle_load_dll): Reorganize, add first attempt at reading
dll names from attached processes. Change info messages to provide
more information when dll is already loaded.
(handle_exception): Changes mandated by new thread-aware structures.
(child_wait): Track thread creation/destruction. Handle cygwin
signals.
(child_create_inferior): Ditto.
(child_resume): Ditto.
(child_kill_inferior): Ditto. Close child process handle to avoid a
handle leak.
(child_ops): Fill out child_ops fields that deal with threads.
* config/i386/tm-cygwin32.h: Declare function and macro needed
for converting a cygwin "pid" to a string.
* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
sigsetmask is not defined in cygwin.
pseudo-register, not the same as a3.
(D2_REGNUM, D3_REGNUM, A2_REGNUM, A3_REGNUM): Define.
* mn10300-tdep.c (fix_frame_pointer): New function.
(set_movm_offsets): Use register number macros instead of
hard-coded constants.
(mn10300_analyze_prologue): Fix to handle redefinition of FP_REGNUM.
(mn10300_frame_chain): Fix to handle redefinition of FP_REGNUM;
use register number macros instead of hard-coded constants;
add missing parameter to call of mn10300_analyze_prologue.
(mn10300_frame_saved_pc): Use register number macros instead of
hard-coded constants.
* sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use
same method on both 32-bit and 64-bit machines.
* sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't
support hardware breakpoints.
* config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments.
* configure.in: Add more header files to AC_CHECK_HEADERS.
* configure: Regenerated.
* command.c: Include wait.h or sys/wait.h if present.
* inftarg.c: Ditto.
* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
on autoconf test.
* infptrace.c: Ditto.
* expprint.c: Include ctype.h for isprint prototype.
* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
present, based on autoconf test.
* utils.c: Include curses.h and term.h if present.
(puts_debug): Change 'carriage_return' local variable to return_p
to avoid name clash.
* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
determine it with autoconf.
* config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
with autoconf.
* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
with autoconf.
* config/i386/nm-i386v.h: Ditto.
* config/i386/nm-symmetry.h: Ditto.
* config/m88k/xm-cxux.h: Ditto.
* config/m88k/xm-dgux.h: Ditto.
* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
* config/m68k/nm-delta68.h: Removed.
(mips_addr_bits_remove): Test mask_address_p to decide whether
to mask off the upper 32 bits of addresses.
(_initialize_mips_tdep): Add command to set mask_address_p.
(mips_call_dummy_address): New function.
* config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
call mips_call_dummy_address.
* config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The
stack pointer et al are synthesized from the SP_REGNUM (etc)
defines and should not be mentioned in REGISTER_NAMES.
There is a log discussion copied into PR 15966 about how this is not
handled consistently across all targets and we ought to clean it up
a bit. I'm not tackling the general for this PR, though.
* config/mips/tm-irix5.h: Modify to work better on irix 6, by
making FP registers 8 bytes instead of 4.
REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine.
REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine.
* irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
* mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish
targets with 8-byte FP registers (don't use TARGET_MIPS64).
(STACK_ARGSIZE): new macro, how much space is taken up on the
stack for each function argument (don't use TARGET_MIPS64).
(mips_push_arguments): modify logic to work better on Irix 6
(n32 ABI).
set endianness based on machine type.
(_initialize_sparc_tdep): Initialize target_architecture_hook.
(sparc_print_register_hook): Print PSR and FPSR in fancy format
on 32-bit machines.
* config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
call sparc_print_register_hook instead of using inline code.
* config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
%o0-%o5 as 64-bit values; compensate for stack bias.
(USE_STRUCT_CONVENTION): We only pass pointers to structs
if they're larger than 32 bytes.
(REG_STRUCT_HAS_ADDR): Ditto.
* sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
instead of read_register. If the target is a sparc64 and the frame
pointer is odd, compensate for the stack bias.
(get_saved_register): Use read_sp().
(DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
(sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
(sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
dummy frame.
(sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
the FP is odd, compensate for stack bias.
(sparc_store_return_value): Right-justify the return value before
writing it to %o0.
(sparc_fix_call_dummy): Don't NOP out part of the call dummy on
sparc64.
(sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
sparc64_write_fp, sp64_push_arguments,
sparc64_extract_return_value): New functions to support the
sparc64 ABI.
* dwarfread.c (handle_producer): Set processing_gcc_compilation to
the right version number.
* dwarf2read.c (read_file_scope): Assume we're processing
GCC2 output.
make it work on the simulator.
(FIX_CALL_DUMMY): Convert to function call instead of inline code.
(sparc_fix_call_dummy): Declare.
* sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
old FIX_CALL_DUMMY macro, with additional fixes for simulator.
(sparc_push_dummy_frame): Set registers differently on simulator
to prevent corrupted register window save areas.
* procfs.c: Added replacement macros for LWP stuff. Fixed support
for UnixWare / SVR4.2MP targets and any targets which use
multi-file /proc entries. Fixed support for hardware watchpoints.
* solib.c: SCO needs some of the same code as SunOS. Change
preprocessor conditionals.
* config/i386/i386sco5.mt: New file.
* config/i386/tm-i386sco5.h: New file.
* config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
* config/i386/nm-i386v42mp.h
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
Add other macros for hardware assisted watchpoints.
* config/i386/nm-i386sco5.h: Correct attributions.
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
* config/i386/nm-linux.h (target_remote_watchpoint): Pass
'type' through to i386_insert_watchpoint.
Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (wait_for_inferior): Don't add signalled processes
as new threads.
* procfs.c (wait_fd): Note if LWP has exited.
(procfs_wait): use GETPID to get process ID.
NOTE: I didn't commit Kean's changes to configure.host/configure.tgt
yet because they are kind of bogus and I'm punting back to him to let
him figure out what he's trying to do. So configuring for UnixWare
may not work just yet.
(sparc_extract_return_value): New function, required to handle
machines without floating point.
(sparc_store_return_value): Ditto.
* config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
sparc_extract_return_value instead of using inline code.
(sparc_extract_return_value): Declare.
(STORE_RETURN_VALUE): Call sparc_store_return_value instead
of using inline code.
(sparc_store_return_value): Declare.
work correctly on little-endian hosts.
(sparc_push_arguments): New function.
(gdb_print_insn_sparc): New function.
(_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
disassembler, so that SPARClite-specific instructions will
be recognized.
* sparcl-tdep.c (readchar): Print debugging information.
(debug_serial_write): New function, a replacement for SERIAL_WRITE
that prints debugging information.
* config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
(sparc_push_arguments): Declare.
* configure.tgt: Switch over to use tm-4320.h. Since I switched to
MIPS EABI the fixes are no longer backward compatible with 4300.
* tm-vr4320.h: Added
* vr4320.mt: Added
Update support for x86 Solaris 2.
* config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
files for x86 Solaris 2.
* config/i386/i386sol2.mt, i386sol2.mh: Use them.
* config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
carry flag from a given regset.
(IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
is a SunPro transformed name.
* i386-tdep.c (sunpro_static_transform_name): New function to
extract the source name from a SunPro transformed name.
* inferior.h (procfs_first_available, procfs_get_pid_fd):
Add prototypes.
* infrun.c (wait_for_inferior): Handle breakpoint hit in
signal handler without intervening stop in sigtramp.
* procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
instead of direct access to the status register.
(procfs_get_pid_fd): New function, returns procfs fd for a given pid.
* sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
lwpid.
(sol_find_new_threads): Handle failed libthread_db initialization
gracefully.
* stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
to check for a SunPro transformed symbol name.
* ns32k-tdep.c (flip_bytes, ns32k_localcount,
ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
deleted.
* ns32knbsd-nat.c: New (?) file to support fetching and storing
registers on NetBSD hosts.
* nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
ns32k-nat.o
* ns32km3-nat.c (reg_offset): Get order of floating point
registers correct. Add extra 32382 register offsets.
(REG_ADDRESS): define to point at correct part of thread
state. Use calls to "warning" instead of "message".
* tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
fpu registers.
* config/d10v/d10v.mt config/d30v/d30v.mt config/m32r/m32r.mt
config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
from SIM. This prevents dependency checking of -lm (under NT
native builds). (It is automatically added by configure if it
exists.)
* doc/configure mswin/configure nlm/configure
testsuite/gdb.base/configure testsuite/gdb.c++/configure
testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
Regenerate with autoconf 2.12.1 to fix shell issues for NT native
builds.
* gdbserver/Makefile.in: add dependency on XM_CLIBS.
* gdbserver/low-sim.c (registers) force into alignment.
(create_inferior): Fix typo on new_argv; add abfd arg to
sim_open, sim_create_inferior. Add reg_size arg to
sim_fetch_register, sim_store_register. Make simulator
take a single-step to get into a known running state.
* gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
* gdbserver/server.c: Add remote_debug variable to control
debug output.
* gdbserver/server.h: Add prototypes for enable/disable_async_io.
* gdbserver/remote-utils.c: add verbose debugging output controlled
by "remote_debug" variable. Add call to "disable_async_io()"
to avoid being killed by async SIGIO signals.
* config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
so that gdbserver can be built with the m32r simulator.
* config/m68k/xm-sun3os4.h: Remove malloc declarations, they
are handled via autoconf now.
* remote.c (remote_ops, extended_remote_ops): Replace static
forward declaration by moving the static definition to the top of
the file, for old K&R compilers.
* tracepoint.c (collect_symbol, trace_start_command):
Replace ANSI string concatenation with K&R compatible simple string.
Configuration triple mips64vr4111-*-elf
64 bit architecture
16 bit sub core
32 bit ints and floats
No floating point unit
MIPS EABI interface
Dwarf2 debugging format
