PR gas/19614
* dw2gencfi.c (cfi_sections_set): Delay setting this variable
until it is actually used.
(cfi_set_sections): Set cfi_sections_set to true.
(dot_cfi_startproc): Likewise.
(dot_cfi_endproc): Likewise.
(dot_cfi_fde_data): Likewise.
(cfi_finish): Likewise.
(dot_cfi_sections): Do not set cfi_sections_set.
* doc/as.texinfo (.cfi_sections): Note that targets can provide
their own cfi section name. Also note that the directive can be
reissued provided that CFI generation has not started.
* testsuite/gas/mips/compact-eh-err2.s: Add .cfi_startproc and
.cfi_endproc directives so that the redefinition of .cfi_sections
will trigger the generation of the error message.
* testsuite/gas/mips/compact-eh-err2.l: Update expected line
number of error message.
PR target/19561
opcdoe * msp430-dis.c (print_insn_msp430): Add a special case for
decoding an RRC instruction with the ZC bit set in the extension
word.
include * opcode/msp430.h (IGNORE_CARRY_BIT): New define.
(RRUX): Synthesise using case 2 rather than 7.
gas * config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2
to handle encoding of RRUX instruction.
* testsuite/gas/msp430/msp430x.s: Add more tests of the extended
shift instructions.
* testsuite/gas/msp430/msp430x.d: Update expected disassembly.
Change 1058c7532d "Use signed data type for R_XTENSA_DIFF* relocation
offsets." changed signedness of BFD_RELOC_XTENSA_DIFF* relocations
substituted for BFD_RELOC_*. This made it impossible to encode arbitrary
8-, 16- and 32-bit values, which broke e.g. debug info encoding by .loc
directive. Revert this part and add test.
gas/
2016-02-03 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): Mark BFD_RELOC_XTENSA_DIFF*
substitutions for BFD_RELOC_* as unsigned.
* gas/testsuite/gas/xtensa/all.exp: Add loc to list of xtensa
tests.
* gas/testsuite/gas/xtensa/loc.d: New file: loc test result
patterns.
* gas/testsuite/gas/xtensa/loc.s: New file: loc test.
This change makes gas's notion of the msp430 dwarf2 address size match
that of gcc and gdb. This is needed so that the format of addresses
generated for DW_LNE_set_address in .debug_line will match the address
size for the compilation unit.
In gcc/config/msp430/msp430.h, it's set to 4:
#define DWARF2_ADDR_SIZE 4
Likewise in gdb/msp430-tdep.c:
set_gdbarch_dwarf2_addr_size (gdbarch, 4);
(As far as I can tell, however, GDB doesn't use this value when decoding
.debug_line. Instead, GDB uses the Pointer Size from the compilation
unit.)
readelf is able to seamlessly handle mismatches between these various
sizes by using the size of the DW_LNE_set_address instruction to
determine the address size. Another way to fix this problem is to
make GDB behave in a similar manner. In my opinion, GDB should detect
and inform the user about these mismatches; it's not clear to me if
it's correct for GDB to go ahead and read the address anyway when a
size mismatch is detected.
Without this change, addresses in .debug_line are encoded in two bytes
for some multilibs. When GDB reads the address for
DW_LNE_set_address, it uses the pointer size provided by the CU. When
these values don't match, GDB reads the wrong number of bytes. In the
cases that I've looked at, GDB is reading 4 bytes from a 2 byte
container, which results in a garbage address. GDB discards lines
which have a bogus address; the end result is that GDB records no line
number information for CUs which have a mismatch between the address
size (from the CU) and the format of the address used by
DW_LNE_set_address.
gas/ChangeLog:
* config/tc-msp430.h (DWARF2_ADDR_SIZE): Set to 4.
Basic all instructions assembler test, auto-generated by CGEN, then
fixed by hand for some cases where CGEN had generated invalid
instruction operands.
gas/ChangeLog:
* testsuite/gas/ip2k/allinsn.d: New file.
* testsuite/gas/ip2k/allinsn.s: New file.
* testsuite/gas/ip2k/ip2k-allinsn.exp: New file.
In commit 02a79b89fd some of the load
instructions with a zero offset (where the offset is not mentioned) were
marked as NO-DIS, meaning that the disassembler must display the offset,
even though it is zero.
This change seems a little strange to me as it was only applied to some
loads, not all, and the same change was not applied to the stores.
However, I'm reluctant to revert a specific change to the assembler,
when the output is obviously correct. With this commit then I simply
bring the expected assembler test results into line with what is
actually produced.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Add explicit 0 offset to
some load instructions.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/regression.d: Likewise.
In commit 02a79b89fd all instruction
aliases that have a '.l' suffix were marked as NO-DIS, so the
disassembler will not display them, in preference to the instruction
without the suffix. However, the gas testsuite was not updated at the
time, this commit fixes that oversight.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Remove unneeded '.l'
suffixes from instruction mnemonics in expected output.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/regression.d: Likewise.
* testsuite/gas/epiphany/sample.d: Likewise.
In commit 02a79b89fd the register aliases
sb, sl, and ip were made less preferred than r9, r10, and r12, however,
the expected test results were not updated. This commit fixes this
oversight and updates the test results.
gas/ChangeLog:
* testsuite/gas/epiphany/addr-syntax.d: Update expected register
names.
* testsuite/gas/epiphany/allinsn.d: Likewise.
* testsuite/gas/epiphany/sample.d: Likewise.
Always set the bytes_per_line field (of struct disassemble_info) to the
same constant value, this is inline with the advice contained within
include/dis-asm.h.
Setting this field to a constant value will cause the disassembler
output to be better aligned.
cpu/ChangeLog:
* epiphany.opc (epiphany_print_insn): Set info->bytes_per_line to
a constant to better align disassembler output.
opcodes/ChangeLog:
* epiphany-dis.c: Regenerated from latest cpu files.
gas/ChangeLog:
* testsuite/gas/epiphany/sample.d: Update expected output.
Use OPTION_MXXX for -mxxx option in x86 assembler.
* config/tc-i386.c (OPTION_OMIT_LOCK_PREFIX): Renamed to ...
(OPTION_MOMIT_LOCK_PREFIX): This.
(md_longopts): Updated.
(md_parse_option): Likewise.
In the instruction to write to the ARMv8.2 PSTATE field UAO,
MSR UAO, #<imm>, the immediate should be either 0 or 1 but GAS accepts
any unsigned 4-bit integer.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR UAO immediate operand.
gas/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/armv8_2-a-illegal.d: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.s: New.
Change-Id: Ibdec4967c00b1ef3be9dbc43d23b2c70d1a0b28c
bfd/ChangeLog:
* elf32-arm.c ((elf32_arm_special_sections): Remove catch of noread
section using '.text.noread' pattern.
gas/ChangeLog:
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
SHF_ARM_NOREAD section flag.
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
handle letter 'y'.
(arm_elf_section_letter) : Declare it.
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
SHF_ARM_NOREAD section flag.
* doc/c-arm.texi (ARM section attribute 'y'): Document it.
gas/testsuite/ChangeLog:
* gas/arm/section-execute-only.s: New test case.
* gas/arm/section-execute-only.d: Expected output.
ld/testsuite/ChangeLog:
* ld-arm/thumb1-noread-not-present-mixing-two-section.s: Add 'y'
attribute usage.
* ld-arm/thumb1-noread-present-one-section.s: Likewise.
* ld-arm/thumb1-noread-present-two-section.s: Likewise.
* ld-arm/thumb1-input-section-flag-match.s: Likewise.
binutils/ChangeLog:
* readelf.c (get_elf_section_flags): Display y letter for section
with SHF_ARM_NOREAD section flag in readelf section output.
(process_section_headers): Add y letter in readelf section output
key mapping for ARM architecture.
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils. So, counter that. This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).
binutils/
* testsuite/lib/binutils-common.exp (is_elf_format): Return true
for m68hc11/12 and xgate triples.
gas/
* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
* testsuite/ld-elf/pr14156a.d: Likewise.
* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
* testsuite/ld-elf/sec64k.exp: Likewise.
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
instructions that can support stack pointer operations.
* rl78-decode.c: Regenerate.
* rl78-dis.c: Fix display of stack pointer in MOVW based
instructions.
* testsuite/gas/rl78/sp-relative-movw.s: New test.
* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
* testsuite/gas/rl78/rl78.exp: Run the new test.
Some of the RAS system registers added to binutils as part of the ARMv8.2
support are missing the feature checks to warn when they aren't
supported by the target.
This patch adds the missing feature checks with a test to check that
the correct warnings are given for all the ARMv8.2 system registers.
gas/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/illegal-sysreg-2.l: New.
* testsuite/gas/aarch64/illegal-sysreg-2.d: New.
opcodes/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
testing for RAS support. Add checks for erxfr_el1, erxctlr_el1,
erxtatus_el1 and erxaddr_el1.
Change-Id: I66b590ea49c1eb6b0e5c93e0dc2bc9c4e79a52fe
Fix:
cc1: warnings being treated as errors
.../gas/config/tc-nios2.c: In function 'output_movia':
.../gas/config/tc-nios2.c:3474: warning: 'code' may be used uninitialized in this function
make[4]: *** [tc-nios2.o] Error 1
seen with GCC 4.1.2 and 4.4.7.
gas/
* config/tc-nios2.c (output_movia): Preset `code' to 0.
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_v8_2): New.
(insns): Add "esb".
* testsuite/gas/arm/armv8_2-a.d: New.
* testsuite/gas/arm/armv8_2-a.s: New.
opcodes/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* arm-dis.c (arm_opcodes): Add "esb".
(thumb_opcodes): Likewise.
Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
For ISA_B/C only the combination #,d(An) is allowed in addition to the
ISA_A combinations for move.b and move.w (and pc-relative is never
allowed as destination).
opcodes/
PR gas/13050
* m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
addition to ISA_A.
gas/
PR gas/13050
* testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2.
* testsuite/gas/m68k/p13050-1.s: New file.
* testsuite/gas/m68k/p13050-2.d: New file.
* testsuite/gas/m68k/p13050-2.s: New file.
The convention within for relocation names is that they start with the
string "R_", however, this is not so for ARC for the display names of
relocations, however, internally, the names for the relocations types do
have the 'R_' prefix. I suspect that the missing 'R_' on the output
strings was an oversight, as I can't see any comment to the contrary.
To bring ARC into line with other targets, this commit adds the 'R_'
prefix to the output strings used for relocation names, and updates all
of the assembler tests where this was exposed.
bfd/ChangeLog:
* elf32-arc.c (reloc_type_to_name): Change ARC_RELOC_HOWTO to
place 'R_' before the reloc name returned.
(elf_arc_howto_table): Change ARC_RELOC_HOWTO to place 'R_' before
the relocation string.
gas/ChangeLog:
* testsuite/gas/arc/adc.d: Add 'R_' prefix to relocation names.
* testsuite/gas/arc/add.d: Likewise.
* testsuite/gas/arc/and.d: Likewise.
* testsuite/gas/arc/asl.d: Likewise.
* testsuite/gas/arc/asr.d: Likewise.
* testsuite/gas/arc/bic.d: Likewise.
* testsuite/gas/arc/extb.d: Likewise.
* testsuite/gas/arc/extw.d: Likewise.
* testsuite/gas/arc/j.d: Likewise.
* testsuite/gas/arc/jl.d: Likewise.
* testsuite/gas/arc/ld2.d: Likewise.
* testsuite/gas/arc/lsr.d: Likewise.
* testsuite/gas/arc/mov.d: Likewise.
* testsuite/gas/arc/or.d: Likewise.
* testsuite/gas/arc/pcl-relocs.d: Likewise.
* testsuite/gas/arc/pcrel-relocs.d: Likewise.
* testsuite/gas/arc/pic-relocs.d: Likewise.
* testsuite/gas/arc/plt-relocs.d: Likewise.
* testsuite/gas/arc/rlc.d: Likewise.
* testsuite/gas/arc/ror.d: Likewise.
* testsuite/gas/arc/rrc.d: Likewise.
* testsuite/gas/arc/sbc.d: Likewise.
* testsuite/gas/arc/sda-relocs.d: Likewise.
* testsuite/gas/arc/sda-relocs2.d: Likewise.
* testsuite/gas/arc/sexb.d: Likewise.
* testsuite/gas/arc/sexw.d: Likewise.
* testsuite/gas/arc/st.d: Likewise.
* testsuite/gas/arc/sub.d: Likewise.
* testsuite/gas/arc/tls-relocs.d: Likewise.
* testsuite/gas/arc/xor.d: Likewise.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
