_initialize_array to array_open. It was forcing the baud rate of
all targets to be 4800 baud! Seems like I've fixed this before...
* config/mips/idt.mt (TDEPFILES): Remove remote-array.o. This
has *nothing* to do with IDT!!!
sh3 monitor support.
* monitor.c: Cleanup regexp compilation stuff to make it easier
to use several regexps.
* monitor.h: Get rid of struct rom_cmd_data. It's no longer used.
* config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just
causes GDB to crash.
screws up too many targets.
* sparcl-stub.c: Add prototypes to many forward decls.
* Create private copies of strlen, strcpy, and memcpy to prevent
chaos when user steps into them.
* (trap_low handle_exception): Clean up DSU support code
(hardware breakpoints). Move lots of stuff from asm-land to
C-land (make it much easier to #ifdef if necessary). Also, use
trap 255 to get into break mode instead of doing a DSU register
write, which may trash the register.
* (putpacket): Don't check return value of putDebugChar. It
returns void...
mentioned in the dld_list can't be found.
Warning seems more reasonable than croaking.
* config/pa/tm-hppah.h (FRAME_SAVED_PC_IN_SIGTRAMP): Dig out
the PC from the PC queues rather than %r31.
Fixes net bug. Might also fix one of the hpux10 corefile.exp failures,
not sure (will test when I get back monday morning).
fondling macros.
* (trap_low): Save and restore FP regs if necessary. Also, clean
up save and restore of debug unit regs.
* (hard_trap_info): Add more architecturally defined traps.
* (set_debug_traps): Only set FP disabled trap if FP is disabled.
* (get_in_break_mode): Clean up. Get rid of calls to
set_hw_breakpoint_trap(). Also, use write_asi macro
* (handle_exception): Clean up `g' and `G' commands. Add `P'
command.
* (hw_breakpoint): Why was this here!? It's gone now...
* callback.c (fdbad): Fix typo in comment.
(os_close, os_isatty, os_lseek, os_read, os_write): Use if statements
rather than || to get correct return value.
(os_write_stdout): Pass missing first argument to os_write.
* remote-sim.c: Include callback.h.
(_initialize_remote_sim): Call sim_set_callbacks and then initialize
the callbacks.
a value of that type; use that instead of setting VALUE_REPEATED.
* value.h (struct value): Remove fields repetitions and repeated.
(VALUE_REPEATED, VALUE_REPETITIONS): Removed, no longer used.
* c-valprint.c, ch-valprint.c, eval.c, printcmd.c, valops.c,
value.h, values.c: Simplify, since now VALUE_REPEATED is never used.
* valprint.c (value_print_array_elemen): Removed never-used function.
* expprint.c (print_subexp): Add OP_NAME support.
* parse.c (length_of_subexp, prefixify_subexp): Likewise.
* scm-lang.c (scm_unpack, in_eval_c, scm_lookup_name): new function.
* scm-lang.h: Declare builtin_type_scm; other minor tweaks.
* values.c (unpack_long): If type is SCM, call scm_unpack.
* scm-valprint.c (scm_val_print): Use extract_signed_integer,
instead unpack_long
* scm-lang.c: More Scheme expression parsing from here ...
* scm-exp.c: ... to here. New file.
Also, provide for gdb to evaluate simple constants and names..
* Makefile.in: Note new scm-exp.{c,o}.
(force_to_range_type): Use get_discrete_bounds.
* gdbtypes.h (get_discrete_bounds): Add declaration.
* valarith.c (value_bit_index): Generalize to use get_discrete_bounds.
* ch-valprint.c (chill_val_print): Make (power)sets and bitstring
support use get_discrete_bounds and generally be more robust.
This fixes PR chill/8136.
* scm-valprint.c: ... this new file.
Also major improvements in support for printing SCM values.
* scm-lang.h: New file.
* scm-tags.h: New file.
* Makefile.in: Note new scm-valprint.{c,o}.
* Makefile.in (remote-rdp.o): Doesn't need remote-rdp.h
* callback.c (os_printf_filtered): fix protos.
* defs.h (puts_filtered, puts_unfiltered
[v|f|]printf_[un]filtered): Make format arg const.
* remote-rdp.c (rdp_init): Attept to sync at different
baudrates.
* utils.c (puts_filtered, puts_unfiltered
[v|f|]printf_[un]filtered): Define prototypes with
const in the right place.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
structure tuples. Now also handles Chill variant records.
(get_label): New function, used by evaluate_struct_tuple.
(evaluate_subexp_standard case OP_ARRAY): Use evaluate_struct_tuple.
(evaluate_labeled_field_init): Removed.
* valops.c (search_struct_field): Generalize to work with Chill
variant records.
and dependencies_used after finishing the partial symbol table.
* rs6000-nat.c (xcoff_relocate_core): Don't relocate data
addresses for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE
is defined.
* xcoffread.c: gcc -Wall lint. Remove traceback table reading
code. The existing code tried to add parameter information for
functions compiled without -g, which cannot be done properly
for optimized code and produced misleading parameter displays.
(ef_complaint, eb_complaint): Make a local static copy to avoid
dependency on coffread.c.
(read_xcoff_symtab, process_xcoff_symbol, scan_xcoff_symtab):
Enter C_EXT/C_HIDEXT symbols into the minimal symbol table only.
(read_xcoff_symtab): Ignore C_STAT section auxiliary entry
symbols. Complain about unmatched .ef and .eb symbols instead of
segfaulting.
(process_xcoff_symbol): Determine value of C_GSYM symbols via
the global_sym_chain mechanism in stabsread.c.
(xcoff_new_init): Call stabsread_new_init and buildsym_new_init.
(init_string_tab): Initialize length field bytes in the strtbl.
(scan_xcoff_symtab): Skip symbols that start with `$' or `.$'.
Set first_fun_line_offset for symbols with two auxents only.
* valops.c (value_bitstring): TYPE_LENGTH is bytes, not bits.
* gdbtypes.c (force_to_range_type): Calculate upper limit of
TYPE_CODE_CHAR depending on TYPE_LENGTH (instead of just using 255).
solib.c to symfile.c.
* solib.c: ditto.
* symfile.h: Add extern declaration of the above mentioned variable.
* infcmd.c: Take out extern declaration, since it's in symfile.h.
(som_solib_create_inferior_hook): Don't add libraries if
auto_solib_add_at_startup is zero.
(_initialize_som_solib): Add command to toggle
auto_solib_add_at_startup.
xfails when not gcc compiled for "print foo::funclocal".
(test_at_foo): Add "hppa*-*-hpux*" xfails when not gcc compiled for:
"print foo::funclocal at foo",
"print 'scope1.c'::foo::funclocal at foo",
"print foo::funclocal_bss at foo",
"print 'scope1.c'::foo::funclocal_bss at foo",
"print foo::funclocal_ro at foo",
"print 'scope1.c'::foo::funclocal_ro at foo",
"print bar::funclocal at foo" and
"print 'scope1.c'::bar::funclocal at foo".
(test_at_bar): Add "hppa*-*-hpux*" xfails when not
gcc compiled for "print foo::funclocal at bar".
Expand all messages to ensure that they identify that
the test is at bar().
* gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not
gcc compiled for:
"ptype on opaque struct pointer (statically)",
"ptype on opaque struct tagname (statically)",
"ptype on opaque struct pointer (dynamically) 1",
"ptype on opaque struct tagname (dynamically) 1",
"ptype on opaque struct pointer (dynamically) 2" and
"ptype on opaque struct tagname (dynamically) 2
* gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not
gcc compiled for:
"p datalocal"
"whatis datalocal",
"ptype datalocal",
"p bsslocal",
"whatis bsslocal", and
"ptype bsslocal".
* gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for
"backtrace in langs.exp" and "up to langs0__2do in langs.exp"
when not gcc compiled.
* gdb.base/funcargs.exp (float_and_integral_args): Add
"hppa*-*-hpux*" xfail for "run to call2a" when not gcc
compiled.
(discard_and_shuffle): Add "hppa*-*-hpux*" xfail for
"backtrace from call6a" when not gcc compiled.
(shuffle_round_robin): Add "hppa*-*-hpux*" xfail for
"backtrace from call7a" when not gcc compiled.
* gdb.base/callfuncs.exp (do_function_calls):
Add "hppa*-*-hpux*" xfail when not gcc compiled for
"p t_char_array_values(char_array_val2,char_array_val1)",
"p t_char_array_values(char_array_val1,char_array_val2)",
"p t_char_array_values("carray 1","carray 2")",
"p t_char_array_values("carray 1",char_array_val2)",
"p t_char_array_values(char_array_val1,"carray 2")",
"p sum_args(1,{2})",
"p sum_args(2,{2,3})",
"p sum_args(3,{2,3,4})",
"p sum_args(4,{2,3,4,5})"
* gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for
"backtrace in corefile.exp" when not gcc compiled.
* tm-ppc-eabi.h (PC_IN_CALL_DUMMY): Redefine this to work with the
simulator. FIXME.
* rs6000-tdep.c (push_dummy_frame): Calculate the correct link
register offset from the current frame (don't assume it is always 8).
(push_dummy_frame): Add comment about having only 4096 bytes of
stack space in the simulator (by default).
* remote-sim.c (gdbsim_create_inferior): Call
`add_text_to_loadinfo' so that gdb can find TOC entries when
calling functions in the inferior.
With this changes, it is now possible to correctly call inferior
functions in the PPC simulator.
a procedure. Accept blanks or TABs as whitespace, increase
timeout and expect input buffer size for the large output
from the command. Remove "i*86-*-bsdi2.0" xfail.
have size 4.
(REGISTER_VIRTUAL_SIZE): Likewise.
(REGISTER_VIRTUAL_TYPE): Lower 32 fp regs have type float.
Upper 32 fp regs have type double.
* sparc-tdep.c (NUM_SPARC_FPREGS): Replace with
(FP_REGISTER_BYTES): this, and update all uses.
(FP_MAX_REGNUM): Define if not already.
(get_saved_register): Handle new sparc64 fp regs.
(sparc_frame_find_saved_regs): Likewise.
(sparc_print_register_hook): Only print fp regs < 32 as doubles.
Add code to handle long doubles when gdb does.
(_initialize_sparc_tdep): Use print_insn_sparc64 if sparc64.
* configure: Rebuilt.
* symtab.c (list_symbols): Add missing blank after
`<function, no debug info>' output.
* valops.c (value_assign): Handle truncation when assigning
to bitfields. Use value_copy to construct the return value
from toval.
* values.c (value_copy): Copy VALUE_FRAME and VALUE_OPTIMIZED_OUT.
mips-sgi-irix* xfail for
"call inferior func with struct - returns char *"
and fix test so that an optional (unsigned char *) cast is
accepted in the result.
sparc-sun-solaris2* xfail for "print f1 after run to call2a".
* gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix.
* gdb.base/signals.exp: Remove duplicate "handle all print" test
that accidentally got checked in.
spot different prompts at run-time, so as to avoid having target
specific versions of gdb. This is a pending TODO.
Fri Sep 1 08:25:50 1995 James G. Smith <jsmith@beauty.cygnus.com>
* configure (mips64*vr4300*-*-elf): Support added.
* remote-mips.c (mips_readchar): Change to allow build-time prompt
string.
* config/mips/tm-mips.h: Added TARGET_MONITOR_PROMPT.
* config/mips/{vr4300.mt, vr4300el.mt, tm-vr4300.h,
tm-vr4300el.h}: Added.
clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc
compiled test.
* gdb.base/opaque.exp (setup_xfail_on_opaque_pointer):
Add mips-sgi-irix5* xfail for not gcc compiled.
* gdb.base/Makefile.in (nodebug.o): Also create nodebug.ci.
* gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for
"p top", "whatis top", "p middle", and "whatis middle".
* gdb.base/whatis.exp: Add mips-sgi-irix* xfail for
"whatis signed char" for not gcc compiled.
* gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for
"set variable signed char=-1 (-1)" and
"set variable signed char=0xFF (0xFF)" for not gcc compiled.
* gdb.base/funcargs.exp (float_and_integral_args):
Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled.
Add mips-sgi-irix* xfail when not gcc compiled for
"continue to call2b".
Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for
"continue to call2g".
(discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for
"backtrace from call6a"
(shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for
"backtrace from call7k".
Add mips-sgi-irix5* xfail when not gcc compiled for
"backtrace from call7a".
(localvars_after_alloca): Fix gdb_test cmds for
"print * after runto ...".
Remove rs6000-*-* xfails for
"print i after runto localvars_after_alloca" and
"print l after runto localvars_after_alloca"
for all compilers.
* gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5),
when not compiled with gcc, for:
"print signed char == (minus)",
"print signed char != (minus)",
"print signed char < (minus)",
"print signed char > (minus)".
* gdb.base/callfuncs.exp (do_function_calls):
Add mips-sgi-irix* xfail, when compiled with native compiler, for
"call inferior func with struct - returns char *".
* gdb.base/return.exp (return_tests): Change xfail for
"correct value returned double test" to include Solaris 2.4.
* gdb.base/funcargs.exp (float_and_integral_args):
Add sparc-sun-solaris2* xfail for "print f1 after run to call2a".
Determine signedness of enum type from enumerators.
(parse_type): Handle btIndirect types, handle fBitfield for
some non-member types.
(upgrade_type): Use TYPE_FLAG_TARGET_STUB for arrays with
unknown length.
(cross_ref): Handle stIndirect forward reference to btTypedef.
* stabsread.c (read_enum_type): Determine signedness of enum
type from enumerators.
* top.c (execute_command): Remove trailing whitespace from
command arguments, except for `set' and `complete' commands.
(validate_comname): Allow underscores in user defined command
names.
* values.c (modify_field): Change `Value does not fit in %d bits'
error to a warning. Exclude sign extension bits of negative field
values from fit check.
problems than it fixes.
* hppa-tdep.c (skip_prologue): If we exit the main loop without
finding all the register saves, retry again without looking for
the registers we could not find the first time.
Better fix for 7768.
calls "main" directly.
(skip_prologue): Always assume arguments were saved into the stack
since GCC will do so without setting the magic Args_Saved bit in
the unwind descriptor.
* gdb.base/callfuncs.c (main): Use struct_val1 to inhibit xlc
from optimizing it away.
* gdb.base/callfuncs.exp: Remove rs6000-*-* xfails for
"call inferior func with struct".
rule that generates a .ci file for each .o file and remove
explicit .c.o rules except for callfuncs.o.
* gdb.c++/Makefile.in: Add .cc.o transformation rule that
generates a .ci file for each .o file and remove explicit
.cc.o rules.
(clean): Remove *.tmp *.ci files.
(EXECUTABLES): Remove templ-info.exp.
* gdb.base/compiler.c: New file.
* gdb.c++/compiler.cc: New file
* gdb.base/scope.exp: Source gdb.base/scope.ci.
Change rs6000-*-* xfail for
"print 'scope0.c'::filelocal_ro" and
"print 'scope1.c'::filelocal" and
"print 'scope1.c'::filelocal_bss" and
"print 'scope1.c'::filelocal_ro" and
"print 'scope1.c'::foo::funclocal" and
"print 'scope1.c'::foo::funclocal_ro" and
"print 'scope1.c'::bar::funclocal" and
"print 'scope0.c'::filelocal_ro" and
"print 'scope1.c'::filelocal at foo" and
"print 'scope1.c'::filelocal_bss at foo" and
"print 'scope1.c'::filelocal_ro at foo" and
"print 'scope1.c'::foo::funclocal at foo" and
"print 'scope1.c'::foo::funclocal_bss at foo" and
"print 'scope1.c'::foo::funclocal_ro at foo" and
"print 'scope1.c'::bar::funclocal at foo" and
"print 'scope0.c'::filelocal_ro" and
"print 'scope1.c'::filelocal" and
"print 'scope1.c'::filelocal_bss" and
"print 'scope1.c'::filelocal_ro" and
"print 'scope1.c'::foo::funclocal" and
"print 'scope1.c'::foo::funclocal_bss" and
"print 'scope1.c'::foo::funclocal_ro" and
"print 'scope1.c'::bar::funclocal" and
"print 'scope1.c'::bar::funclocal_bss"
to only be xfail'd when not compiled with gcc.
Add rs6000-*-* xfail for
"print 'scope0.c'::filelocal_bss before run"
when compiled with gcc.
(test_at_main): Add rs6000-*-* xfail for
"print filelocal_ro in test_at_main"
when compiled with gcc.
* gdb.base/ptype.exp: Source gdb.base/ptype.ci.
Add rs6000-*-aix* xfail for
"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and
"ptype t_char_array", not compiled with gcc.
* gdb.base/list.exp (test_list_function): Add rs6000-*-*
xfail for "list foo (in include file)" when gcc compiled.
* gdb.base/funcargs.exp: Source gdb.base/funcargs.ci
(integral_args): Add rs6000-*-* xfail for
"run to call0a" if not compiled with gcc.
(unsigned_integral_args): Add rs6000-*-* xfail for
"run to call1a" if not compiled with gcc.
(float_and_integral_args): Add rs6000-*-* xfail for
"run to call2a" if not compiled with gcc and for
"continue to call2b" for any compiler.
Add rs6000-*-* xfail to
"print f1 after run to call2a" for gcc compiled.
(discard_and_shuffle): Add rs6000-*-* xfail for
"run to call6a".
(shuffle_round_robin): Add rs6000-*-* xfail for
"backtrace from call7a" if not compiled with gcc.
Add rs6000-*-* xfail for
"backtrace from call7b" if compiled with gcc.
(call_after_alloca): Add rs6000-*-* xfail for
"print c in call_after_alloca" and
"print s in call_after_alloca" and
"backtrace from call_after_alloca_subr"
if not compiled with gcc.
(localvars_in_indirect_call): Add rs6000-*-* xfail for
"print c in localvars_in_indirect_call" and
"print c in localvars_in_indirect_call" and
"backtrace in indirectly called function" and
"stepping into indirectly called function"
if not compiled with gcc.
(localvars_after_alloca): Add rs6000-*-* xfail for
"print c after runto localvars_after_alloca" and
"print s after runto localvars_after_alloca" and
"print i after runto localvars_after_alloca" and
"print l after runto localvars_after_alloca"
for all compilers.
* gdb.base/whatis.exp: Source gdb.base/whatis.ci rather
than whatis-info.exp.
* gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather
than opaque-info.exp.
Setup rs6000-*-* xfail for
"ptype on opaque struct pointer (statically)" and
"ptype on opaque struct pointer (dynamically)" when
not compiled with gcc.
* gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci
rather than callf-info.exp.
(do_function_calls): Add clear_xfail for rs6000-*-* for
"p t_float_values2(3.14159,float_val2)". Seems to work
fine there, both with xlc and gcc. Need to find out what
it is doing right and fix other platforms.
* gdb.base/callfuncs.exp: Add rs6000-*-* xfail for
"call inferior func with struct - returns int",
"call inferior func with struct - returns long",
"call inferior func with struct - returns float",
"call inferior func with struct - returns double",
"call inferior func with struct - returns char *",
but only if not gcc compiled (presumes xlc compiled).
Change rs6000-*-* xfails for
"call inferior func with struct - returns char" and
" call inferior func with struct - returns short" to only
xfail if not using gcc.
(clean mostlyclean): Remove *.ci and *.tmp files.
* gdb.c++/templates.exp: Source gdb.c++/templates.ci rather
than templ-info.exp.
* gdb.base/langs.exp: Source gdb.base/langs.ci.
Add rs6000-*-* xfail for "up to foo in langs.exp"
"up to cppsub_ in langs.exp" and "up to fsub in langs.exp"
when not gcc compiled.
* config/rs6000/xm-rs6000.h (FIVE_ARG_PTRACE): Likewise.
So we can build under aix4 with an ansi compiler (should not effect aix3
since aix3 doesn't have a ptrace prototype).
of aix4 need different handling than aix3.
* configure: Updated.
* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files
specific to aix4 support on the power pc.
* config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do
not defined. The aix4 specific target files will do that.
* config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files
specific to aix4 support on the rs6000.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't
do the conversion if the pointer is not a magic aix function
pointer.
* rs6000-tdep.c: Include objfiles.h and symtab.h.
(is_magic_function_pointer): New function.
* rs6000-tdep.c (skip_prologue): Refine check for frameless
functions. Handle b .+4 emitted by aix4 compilers. Only
allow one load of a minimal toc pointer. Handle aix4 compiler's
code for alloca.
* rs6000-tdep.c (find_toc_address): Report an error if no toc was
found rather than possibly core dumping.
* partial-stab.h: Handle extra field generated by the aix4 compiler
for enumerations.
* stabsread.c (read_enum_type): Likewise.
"backtrace through signal handler" to "i*86-*-sysv4*".
* gdb.base/signals.exp: Add xfail for "'next' behaved as
continue" case. Add "known SVR4 bug" to fail message.
Add "i*86-*-bsdi2.0" xfail for "handle all print".
Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1".
* gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for
"whatis unnamed typedef'd enum..." and "ptype t_char_array".
* gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for
"up to foo in langs.exp", "show language at foo in
langs.exp", "up to cppsub_ in langs.exp", "show
language at cppsub_ in langs.exp", "up to fsub in
langs.exp", and "show language at fsub in langs.exp".
* gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for
"bactrace in corefile.exp".
* gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for
"call inferior function with struct - returns float" and
"call inferior function with struct - returns double".
and target.
(powerpc-*-eabi*): Don't set configdirs.
(powerpcle-*-eabi*0: Likewise.
* configure: Updated.
* rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses
for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is
defined.
* config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments
for powerpc running aix4.
* config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target
and host include files for powerpc running aix4.
More of Mike's powerpc work + minor changes.
* gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
* gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
* gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.
sh3e disassembler tests. Sanitized out for now.
corefile.exp from linuxaout to all linux.
* gdb.base/sigall.exp (test_one_sig): Specifically deal with
cases where we miss the breakpoint at the signal handler
for some reason. Setup xfail for linuxoldld/linuxaout and
getting SIGIO. Setup xfail for linuxoldld/linuxaout for
hitting SIGURG breakpoint.
* gdb.base/signals.exp: Setup xfail for "next" acting like
continue to add linuxoldld. Setup xfail for all linux for
"next to handler in signals_tests_1", "backtrace in
signals_tests_1", "continue to func1", "pass SIGUSR1",
and continue to handler".
(SKIP_TRAMPOLINE_CODE): Define.
* alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from
frame to find the saved pc register.
(alpha_saved_pc_after_call): Skip over shared library trampoline
before trying to find the saved pc register.
(find_proc_desc): Copy PROC_PC_REG from found proc_desc
to heuristic proc_desc.
(init_extra_frame_info): Initialize pc_reg field in frame.
values whose length is less than the register size for big endian
targets.
* alpha-tdep.c (alpha_extract_return_value,
alpha_store_return_value): Use alpha_convert_register_to_*
to handle functions returning "float" correctly.
inferior functions and return various types.
* gdb.base/callfuncs.c: Add functions to receive a struct
and return a member of the struct, in various types.
before trying to determine the start of the function.
(skip_prologue): Skip subroutine call which might save the
floating point registers only if it is within the first three
instructions.
Reinstate setting of alloca_reg if setup of a gcc frame pointer
is found.
(frame_get_cache_fsr): Use new fields in rs6000_framedata.
is bash or ksh, which handles "... $(TCL) ..." by trying to run TCL.
Changed configure.in and regenerated configure, including two lines
apparently inserted by custom cygnus version of autoconf 2.4.
read_next_frame_reg to alpha_find_saved_regs, handle saved
floating point registers.
* mips-tdep.c: Move sigtramp handling of saved registers from
read_next_frame_reg to mips_find_saved_regs, handle saved
floating point registers.
* config/mips/tm-irix3.h, config/mips/tm-irix5.h,
config/mips/tm-mipsv4.h (SIGFRAME_FPREGSAVE_OFF): Define.
* sparc-tdep.c (sparc_pc_adjust): Fix check for `unimp'
instruction to handle functions returning structures with
large sizes properly.
"call function when asleep" and "send end of file".
* gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list
for "backtrace in corefile.exp".
* gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list
for "backtrace through signal handler".
* gdb.base/corefile.exp: Make sure we actually generate a core file
before trying the core tests. Some systems allow the user to suppress
generation of core files and default to that (linux for example).
* gdb.base/signals.exp: Change xfail for "next" acting like "continue"
from "i*86-*-linux" to "i*86-*-linuxaout". Works with ELF beta.
and for thread_alive change from a couple weeks ago.
(extended_remote_ops): Declare and define a new target vector
for the extended remote protocol.
(extended_remote_restart): New function to restart the remote
server & process.
(remote_open): Just a stub routine.
(extended_remote_open): New function to start a remote session
using the extended gdb remote protocol.
(remote_open_1): New function containing code common to both
remote_open and extended_remote_open.
(remote_mourn, extended_remote_mourn, remote_mourn_1): Similarly.
(extended_remote_create_inferior): New function for the extended
remote target.
(initialize_remote): Add the extended_remote_ops target vector.
* gdbserver/server.c (main, case '!'): Set extended_protocol.
(main, case 'k'): If the extended protocol is in use, kill the
inferior then start a new one.
(main, case 'R'): New command to restart the remote server and
inferior process. Only supported when using the extended
protocol.
(main, server loop): If the inferior terminates while using the
extended protocol then start a new one. If getpkt fails when
using the extended protocol then exit.
New extended remote gdb protocol support; intended mainly for use with
the gdbserver testing framework that I'll be checking in soon. Also
useful for interactive remote debugging since it supports "run".
gdb tests (step.exp and step2.exp).
* config/mt-lynx (STEP_EXECUTABLE): Define.
(THREADFLAGS): Define.
Hiro's test for 6100 and a crude test of my own. They both need some
major cleanup for non-lynx hosts; both are also a little too loose in
their checks. But I'm too burnt out on lynx to address either concern.
further notice.
Looks like a bug in the lynx2.2.2 kernel scroggs the stack pointer in
these tests leading to massive failures. I've sent a nice small concise
example to Mark Rome @ lynx. Severe braindamage.
typo in setting up configdirs for native builds.
* gdb.base/return.exp: Fix typo in return double test.
* gdb.base/return.c (tmp2, tmp3): Made global to inhibit the
compiler from optimizing them away.
means the process is single threaded, so there's no need to add
it to the thread list. Handle case where multi-threaded process
reverts back to a single-threaded process.
after the inferior gdb has started.
'cuz lynx may take a couple minutes to start the inferior gdb...
* gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
after each command.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gdbvars.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/list.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.c++/demangle.exp: Likewise.
* gdb.c++/inherit.exp: Likewise.
* gdb.chill/chexp.exp: Likewise.
* gdb.fortran/exprs.exp: Likewise.
Just in case we can't get a version of expect that sets the tty modes
right on lynx to avoid this problem.
started after sending a "run" command to gdb.
(text_next_with_recursion): Don't check the output from the
program's printf statement. Instead just make sure the program
exited.
* infrun.c (wait_for_inferior): Set the convenience variable
$_exitcode to the termination code of the inferior.
* top.c (quit_command): Accept optional expression to use
as parameter to exit().
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
to char, since everything passed in and out of dcache is char or casted
to appropriate type anyway.
(dcache_alloc): Move assignment of db out of test and combine separate
tests into if-else.
(dcache_peek_byte): Change ptr from unsigned char* to char*.
(dcache_peek_byte): Remove now unnecessary cast in read_memory call.
(dcache_peek): Change cast of incoming data arg.
(dcache_poke): Change cast of addr of incoming data arg.
(dcache_info): Mask data passed to printf_filtered to lsbyte only.
(dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
* target.c (debug_to_thread_alive): Change return type to int and
return zero, for type compatibility with other *_thread_alive funcs.
(cleanup_target): Change cast of ignore function to match type of the
to_thread_alive member.
* defs.h (error_hook): Add ATTR_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
* remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
to "const char *" from "unsigned char *".
(remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
"char *".
(remote_wait): Change printf format for long arg from "%d" to "%ld".
(getpkt): Remove unused variable "bp".
(remote_fetch_word, remote_store_word): Ifdef out apparently unused
functions.
* breakpoint.c (watchpoint_check): Removed unused variables
"saved_level" and "saved_frame".
* valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
default cases to switch for completeness.
* infrun.c (wait_for_inferior): Enclose "have_waited" label
in #ifdef that matches the one in which it is referenced.
* ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
unused variable "state" in #ifdef that matches one in which it is
referenced.
* eval.c (evaluate_subexp_standard): Remove unused variable "var".
* eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
* valarith.c (value_subscript): Remove unused variable "lowerbound",
which is redeclared in a nested scope prior to use.
* printcmd.c (print_frame_nameless_args): Use "%ld" to print long
arg, not "%d".
* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
Remove unused static var "check_break_insn_size".
* buildsym.c (finish_block): Add other enum LOC_* and default
cases to switch for completeness.
ch-lang.c (type_lower_upper): Removed unused label "retry".
Add other enum TYPE_* and default cases to switch for completeness.
* f-typeprint.c (f_type_print_args): Ifdef out unused function
that may be used someday when Fortran support is complete.
* ch-valprint.c (chill_print_type_scalar): Add other enum
TYPE_* and default cases to switch for completeness.
(chill_val_print): Remove unused local var "high_bound" that
is redeclared in a nested scope prior to use.
(chill_var_print): Use "%ld" to print long arg, not "%d".
* regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
and default to switches for completeness.
* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
"trampoline_symbol".
(prim_record_minimal_symbol_and_info): Return NULL rather than trash.
* elfread.c (elf_symtab_read): Don't dereference NULL returns from
record_minimal_symbol_and_info.
* f-lang.c (saved_function_list_end): Ifdef out unused variable
that may be used someday.
* f-valprint.c (f_val_print): Remove unused local variable "straddr".
(coffstab_build_psymtabs): Remove staboff and stabsize parameters.
Add textaddr, textsize, and stabs parameters.
* gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
Add text_addr and text_size fields.
(DBX_TEXT_SECT): Don't define.
(DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
* coffread.c: Include <ctype.h>.
(struct coff_symfile_info): Remove stabsect and stabindexsect
fields. Add textaddr, textsize, and stabsects fields.
(coff_locate_sections): Record the address of the .text section,
and total the sizes of all sections with names beginning with
".text". Don't bother to record a .stab.index section (COFF
doesn't use them). Make a linked list of all sections with names
beginning with ".stab".
(coff_symfile_read): Adjust call to coffstab_build_psymtabs for
new parameters.
* dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
(elfstab_build_psymtabs): Likewise.
(stabsect_build_psymtabs): Likewise.
(symbuf_sections, symbuf_left, symbuf_read): New static variables.
(fill_symbuf): If symbuf_sections is not NULL, read symbols from
multiple sections.
(coffstab_build_psymtabs): Remove staboffset and stabsize
parameters. Add textaddr, textsize, and stabsects parameters.
Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
multiple stabs sections.
* os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
PR 7241.
for OSF/1-3.x procfs support.
* configure.in (alpha-dec-osf): Use them when configuring
for OSF/1-3.x.
* configure: Updated.
* target.c: Include <string.h>.
* gdb.base/{sigall.c signals.c}: Define away signal() and alarm()
for sh-hms targets, allowing these tests to link, with no other
changes. Testing is suppressed by setting "nosignals" in site.exp.
targets except some specific ones that are known to not support signals.
Also clean up formatting.
* gdb.base/Makefile.in (EXECUTABLES): Remove sigall and signals.
(signals, sigall): Remove rules to build.
* gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}:
Moved to new gdb.signals directory.
* gdb.signals: New test directory.
* gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp,
signals.c signals.exp}: New or moved files.
another, save infrun's state for the old thread and load infrun's
previous state for the new thread.
* thread.c (struct thread_info): Add new fields for thread specific
state saved/restored in infrun.c.
(add_thread): Initialize new fields.
(load_infrun_state): New function.
(save_infrun_state): New function.
* thread.h (load_infrun_state): Provide external decl.
(save_infrun_state): Likewise.
More single-stepping patches for lynx-6100.
wrong thread, make sure to write the fixed PC value into the thread
that stopped. Restart all threads after single stepping over a
breakpoint for a different thread.
* breakpoint.c (set_momentary_breakpoint): Make momentary
breakpoints thread specific in a multi-threaded program.
* lynx-nat.c (child_resume): Add some comments. Correctly
choose between the single and multi-threaded step and continue
ptrace calls.
Some of the lynx-6100 single stepping fixes.
should be char *, not unsigned char *.
* dcache.h (memxferfunc): Ditto.
* monitor.c (monitor_write_memory, monitor_read_memory_single):
Ditto.
(monitor_make_srec): Let compiler figure size of hextab.
to the top of child_wait; let the machine independent code in
wait_for_inferior deal with new thread notifications.
lynx-6100 (partial)
Fixes SEGV when multi-threaded program hits a breakpoint in a new
thread.
* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
(INSTRUCTION_NULLIFIED): Allow specific targets to override.
* config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
around losing mach kernel behavior.
* (create_file_win create_asm_win build_framework): Create null
bindings for meta keys to keep window from dropping down to
insertion point when meta is pressed by itself. New bindings:
Up/Down - Scroll up/down one line at a time
Next/Prior - Scroll up/down one page at a time
Home/End - Warp to current pc/end of file
* (build_framework): Turn on breakpoint menu.
* (create_command_window): Implement tab completion. Add binding
for ^C to stop target.
Don't assume the first entry on dld's library list is the main
program. Don't load the same library more than once and don't
consider the main program a shared library.
(som_solib_sharedlibrary_command): New function
(_initialize_som_solib): Add "sharedlibrary" command.
mentor-7135
* remote-hms.c (hms_open): Make static.
* mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
not {MPW}Interfaces:CIncludes.
* ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
* expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER,
UNUP_LENGTH.
* expprint.c (dump_expression): Handle the new exp_opcodes.
(print_subexp): Handle PREC_BUILTIN_FUNCTION.
(print_simple_m2_func): Removed.
(print_subexp): Remove support for Modula2 builtin functions.
* m2-lang.c (m2_op_print_tab): Add support for builtin functions.
* ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins.
(write_lower_upper_value): Convenience function for LOWER and UPPER.
(upper_lower_argument, length_argument): Removed non-terminals.
* ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH.
(type_lower_upper): New function. Calculate LOWER/UPPER of type.
(value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING.
(evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
This fixes PR 5015 (and 5826 which is a duplicate).
* defs.h: Don't declare strchr and friends if WIN32.
(DIRNAME_SEPARATOR): Move here from source.c.
(SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
symbolic definitions for filename bits.
* top.c (cd_command): Use these.
* source.c (mod_path, openp): Ditto.
* terminal.h: Disable termio/sgtty definitions if WIN32.
* findvar.c (registers_changed): Call registers_changed_hook
if it is defined.
for `watchdog' variable. This allows the user to put an upper
limit on the amount of time that GDB will wait for the target to
return from a step or continue operation. This will primarily be
used for the testsuite, where it is difficult to come up with a
reasonable timeout for things like function calls, which can take
as long as three minutes under some circumstances. If the
watchdog timer expires, GDB will generate an error that looks like
`Watchdog has expired.', and will detach from the target.
* remote-mips.c (mips_open): Setup initial frame from target.
Print it out so that user is told where the program is stopped
when they attach.
* remote-nrom.c: Loads of cleanups. Use serial code to open
network connections. Use expect() to wait for response to
download command.
* ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
* serial.c serial.h (serial_open serial_fdopen serial_close):
Allow users to open the same device multiple times. They all get
to share the same serial_t. This is about the only way to have
multiple active targets use the same device (for download and
debug).
* sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
* target.c: Add `targetdebug' variable. If this is non-zero,
then a special target is put at the top of the target stack which
will cause all calls through the target vector to have their args
and results printed out.
(codestream_fill): Handle byte order differences.
(setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
(arc_get_frame_setup): Read it here.
(arc_frame_saved_pc): And here.
(arc_print_insn): New function.
(arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn.
(_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
cpufile. Awk is not a utility required by the GNU coding
standards. This change also fixes the rigid whitespace
requirements that were required for awk.
stream for i/o with target board.
Use #error if HAVE_TERMIOS is not defined.
* sparclite/{Makefile.in, configure.in}: Converted to use
autoconf.
* sparclite/configure: New file, generated with autoconf 2.3.
hostfile, targetfile and nativefile. Awk is not a utility
required by the GNU coding standards. This change also
fixes the rigid whitespace requirements that were required
for awk.
* configure: regenerated.
target.h.
* target.h: Macros from breakpoint.c. Conditionalize based on
TARGET_HAS_HARDWARE_WATCHPOINTS.
* i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
code.
* config/i386/nm-linux.h, config/mips/nm-irix4.h,
config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
attribute when compiled by gcc.
* defs.h, language.h, monitor.h: Changed many function
declarations to use ATTR_FORMAT.
* breakpoint.c (delete_command); source.c (directory_command);
top.c (define_command): Changed call to query() that had too
many arguments.
* printcmd.c (address_info): Changed call to printf_filtered()
that had too many arguments.
and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
were--after the switch statement on w.kind. You can't read the
registers of an inferior which has exited. Use a goto in the
STOPPED_BY_WATCHPOINT code.
* infrun.c (wait_for_inferior): Reinstate
HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
must match the definition of PARAMS.
start-sanitize-gdbtk
* gdbtk.c: Likewise.
end-sanitize-gdbtk
* xcoffsolib.c (sharedlibrary_command): New command.
* xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
* xcoffsolib.c: Miscellaneous cleanups.
* partial-stab.h: Ignore symbol descriptor '-' (for local
variables with negative type numbers) without complaint.
* rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
local emulation thereof. Remove unused variable ostart.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
symbols, their value is the displacement from the procedure address.
* top.c (init_main): Add missing newlines to help strings for
`if' and `while' commands, fix help string for `show commands'.
target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
constants.
* infrun.c (wait_for_inferior): Enhance comment near
STOPPED_BY_WATCHPOINT.
* target.h: Macros from breakpoint.c.
config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
out by autoconf.
* config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
* Makefile.in, configure.in: Converted to use autoconf
* aclocal.m4: New file, local autoconf macro definitions.
* configure: New file, generated with autoconf 2.3.
into a variable (__WINSIZE) so that it can be controlled via the
.h file.
* sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
for the 933 board.
trap_expected_after_continue.
* (wait_for_inferior): Fix for remote watchpoints. Don't try to
insert breakpoints while target is running (this only works on
*some* native targets). This may also speed up native watchpoints
considerably.
* symfile.c, symfile.h (init_psymbol_list): New function;
consolidate duplicated copies from os9kread.c, dbxread.c
and dwarfread.c.
* defs.h: Declare info_verbose.
* xcoffread.c: Extensive changes to support psymtabs.
* (unwind_command): Clean it up and make it print things out
nicer.
* monitor.c: Add ^C handling capability (mostly ripped off from
remote.c).
* (monitor_printf): Make it check the command echo.
* (monitor_printf_noecho): Similar to above, but doesn't check
for echo.
* (monitor_stop): No longer waits for prompt. That is the job of
the caller. This makes things work much better for monitor_wait,
which waits for the prompt itself.
* (monitor_open): Deal with new monitor_stop semantics. Also,
flush input after sending init strings to get rid of junk that may
be output. Also, don't always send \r to remote. Use
monitor_ops->line_term cuz proper character isn't always \r.
* (monitor_fetch_register): Switch to completely different
algorithm to deal with lame-ass monitors which put spaces in the
middle of numbers, and prompt with a space!!!!!
* (monitor_read_memory_single): New routine to be used with
monitors that can only return one byte/short/long at a time. This
is selected via MO_GETMEM_READ_SINGLE.
* (monitor_load_srec): Use monitor_printf_noecho for sending S
records. Most targets don't echo them.
* (monitor.h): Get rid of cmd_delim. Add line_delim.
* op50n-rom.c (op50n_cmds): Fill it up. Make it work.
* w89k-rom.c: Change all eols from \r to \n. Change load_resp to
^Q to prevent error message.
* config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
instruction sequence at end to make restore_pc_queue happy.
config/rom68k.exp: New tcl glue for the appropriate monitors.
These all just end up calling monitor.exp.
* config/monitor.exp (gdb_target_monitor): Handle `Connection
refused' by retrying. Cleanup some timeout issues.
* (gdb_load): Reduce timeout. Cleanup some timeout issues.
* lib/gdb.exp (gdb_test gdb_test_exact): Upvar timeout so that
callers don't have to set/restore global timeout variable.
* The following set of changes centralizes management of the global
timeout variable. This way, it can be set in one target dependent
place instead of dozens of places scattered throughout the test suite.
If you need to lengthen a timeout, then you should either set timeout
in one of the config/{target}.exp files, or multiply it by a factor.
Setting it to an absolute value is always going to lose for some
targets.
* gdb.base/a1-selftest.exp (test_with_self): Only use local timeout.
* gdb.base/callfuncs.exp (do_function_calls): Don't set timeout.
* gdb.base/funcargs.exp: Don't set timeout.
* gdb.base/list.exp (test_forward_search): Only use local timeout.
* gdb.base/printcmds.exp (test_print_string_constants
test_print_array_constants): Don't set timeout.
* gdb.base/ptype.exp: Don't set timeout.
* gdb.base/recurse.exp: Don't set timeout.
* gdb.base/return.exp: Don't set timeout.
* gdb.base/watchpoint.exp: Don't set timeout.
* gdb.c++/classes.exp (do_tests): Don't set timeout.
* gdb.c++/virtfunc.exp (test_virtual_calls): Don't set timeout.
* Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
value of NETROM_OBS.
(NETROM_OBS): New variable.
* remote-nrom.c: New file, NetROM target support.
* config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
REMOTE_OBS instead of REMOTE_O.
start-sanitize-arc
* config/arc/arc.mt: Ditto.
end-sanitize-arc
for text symbol only.
* breakpoint.c (create_longjmp_breakpoint): call
lookup_minimal_symbol_text instead of lookup_minimal_symbol.
* symtab.h: add lookup_minimal_symbol_text prototype.
Use targetname, serialport and baud variables instead of fixed
constants.
* config/rom68k.exp: Fix copyright and comments. Remove dead code.
* config/cpu32bug.exp: New file to support cpu32bug monitors.
constants into PA instructions.
* Put #ifdefs around all signal handling code. Not generally
needed for embedded boards.
* (hppa_fix_call_dummy): Parameterize offsets into call dummy to
allow different dummys to be used by this code. Use
INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
Conditionalize setup of _sr4export fixup. Improve comments.
* config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
call dummy if PA_LEVEL_0 is defined. Better comments for call
dummys. Define offsets for LDIL/LDO instructions which load
function addresses.
* config/pa/tm-pro.h: Get rid of signal handling stuff. Define
PA_LEVEL_0 to disable mucking with space regs and such.
unnecessary remoteloadprotocol and remoteloadtype support.
* (expect expect_prompt): Change names to monitor_expect and
monitor_expect_prompt. Make them global.
* (printf_monitor): Change name to monitor_printf. Make global.
* (monitor_read_memory): Flush command echo to avoid parsing
ambiguity with CPU32Bug monitor.
* (monitor_load): Remove remoteloadprotocol and remoteloadtype
support. Call target_ops->load_routine, default to
monitor_load_srec.
* (monitor_load_srec): Remove everything but S-record support.
* monitor.h (monitor_ops): Add load_routine to provide monitor
specific download capability.
* remote-est.c: Clean up copyrights and comments.
* w89k-rom.c: Use new xmodem support.
* xmodem.c xmodem.h: New files to support xmodem downloads.
* rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
entry to monitor_ops.
* cpu32bug-rom.c: New file to support Moto BCC debuggers.
* config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
* config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
