'ret' is used to hold the return of target_read, and pass it on. Both
target_read and target_read_live_memory return LONGEST.
gdb/
2013-08-23 Pedro Alves <palves@redhat.com>
* target.c (target_read_live_memory): Change type of 'ret' local
to LONGEST.
There's no need for deprecated_xfer_memory nowadays. Memory access
goes through target_xfer_partial/TARGET_OBJECT_MEMORY, etc. In fact,
the remote target already handles that, and is deferring to the same
helpers the deprecated_xfer_memory hook is. Basically, only a few
adjustments to make these helper routines's interfaces closer to
target_xfer_partial's were necessary.
Tested on x86_64 Fedora 17 w/ gdbserver.
gdb/
2013-08-23 Pedro Alves <palves@redhat.com>
* remote.c (remote_write_bytes_aux, remote_write_bytes)
(remote_read_bytes): Change return type to LONGEST, and adjust to
return a target_xfer_error on error.
(remote_xfer_memory): Delete.
(remote_flash_write): Change type of 'ret' local to LONGEST.
(remote_xfer_partial, remote_xfer_partial): Adjust.
(init_remote_ops): Don't install a deprecated_xfer_memory hook.
NEON vector load and store instructions do not accept immediates
or pre-indexed base plus offset addressing modes, so make sure that
the assembler enforces this.
gas/ChangeLog:
2013-08-23 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ldx_stx): Add extra constraints
for pre-indexed addressing modes.
* testsuite/gas/arm/neon-addressing-bad.l: Add test for
VLDn and VSTn instructions.
* testsuite/gas/arm/neon-addressing-bad.s: Likewise.
gas/testsuite/ChangeLog:
2013-08-23 Will Newton <will.newton@linaro.org>
* testsuite/gas/arm/neon-addressing-bad.l: Add test for
VLDn and VSTn instructions.
* testsuite/gas/arm/neon-addressing-bad.s: Likewise.
PR gdb/15501
* breakpoint.c (enable_command, disable_command): Iterate over
all specified breakpoint locations.
2013-07-12 Muhammad Waqas <mwaqas@codesourccery.com>
PR gdb/15501
* gdb.base/ena-dis-br.exp: Add test to verify
enable/disable commands work correctly with
multiple arguments that include multiple locations.
This time, it passes all the tests and comes with a nearly complete
XML file (plus a script that can nearly regenerate the XML file).
(I elected to leave out __ARM_NR_cmpxchg, since it has dire warnings
to the effect that the only pieces of code that should be aware of it
are the implementation and the __kuser_cmpxchg code in entry-armv.S.)
gdb/
2013-08-14 Samuel Bronson <naesten@gmail.com>
ARM Linux support for `catch syscall'.
* syscalls/arm-linux.py: New file.
* syscalls/arm-linux.xml: Likewise.
* arm-linux-tdep.c (arm_linux_get_syscall_number): New function.
(arm_linux_init_abi): Register the new function and syscall xml file.
* data-directory/Makefile.in: Install the new syscall xml file.
* NEWS: Brag about this.
gdb/testsuite/
2013-08-14 Samuel Bronson <naesten@gmail.com>
ARM Linux support for `catch syscall'.
* gdb.base/catch-syscall.exp: Test this on ARM now.
(fill_all_syscalls_numbers): ARM has close/chroot on 6/61, too.
This fixes dwz.exp on 32-bit targets. It does so by introducing a new
"default" setting for the address size in the DWARF assembler.
Built and regtested on x86-64 Fedora 18.
I also ran the gdb.dwarf2 tests on an x86 machine (gcc45).
* lib/dwarf.exp (cu, tu): Handle addr_size of "default". Change
default addr_size.
* lib/gdb.exp (is_64_target): New gdb_caching_proc.
I noticed that skip_btrace_tests is a classic "caching proc" that I
missed when I added gdb_caching_proc. This patch converts it.
Built and regtested on x86-64 Fedora 18.
* lib/gdb.exp (skip_btrace_tests): Use gdb_caching_proc and
standard_temp_file.
This fixes parts of gdb.arch to be parallel-safe.
I only changed the bits I could test on this machine.
I don't have access to many of the machines needed to fully switch
gdb.arch; but I am happy to provide advice to others attempting this.
Or, I can send an untested patch to convert it all.
Tested on x86-64 Fedora 18.
* gdb.arch/amd64-byte.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-disp-step.exp: Use standard_testfile.
* gdb.arch/amd64-dword.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-entry-value-param.exp: Use standard_testfile.
* gdb.arch/amd64-entry-value.exp: Use standard_testfile.
* gdb.arch/amd64-prologue-xmm.exp: Use standard_testfile.
* gdb.arch/amd64-word.exp: Use standard_testfile,
clean_restart.
* gdb.arch/i386-avx.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-byte.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-disp-step.exp: Use standard_testfile.
* gdb.arch/i386-dr3-watch.exp: Use standard_testfile.
* gdb.arch/i386-permbkpt.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-signal.exp: Use standard_testfile.
* gdb.arch/i386-size-overlap.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-sse.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-unwind.exp: Use standard_testfile.
* gdb.arch/i386-word.exp: Use standard_testfile, clean_restart.
This fixes gdb.python to be parallel-safe, mostly by changing it to
use gdb_remote_download.
Tested on x86-64 Fedora 18.
* gdb.python/py-error.exp: Use gdb_remote_download.
* gdb.python/py-mi.exp: Use gdb_remote_download.
* gdb.python/py-objfile-script.exp: Use standard_output_file.
* gdb.python/py-prettyprint.exp: Use gdb_remote_download.
(run_lang_tests): Likewise.
* gdb.python/py-section-script.c: Use SCRIPT_FILE rather than
filename.
* gdb.python/py-section-script.exp: Set SCRIPT_FILE when
compiling. Use gdb_remote_download. Update some tests.
* gdb.python/py-strfns.exp (test_strfns_core_file): Use
standard_output_file.
* gdb.python/py-typeprint.exp: Use gdb_remote_download.
* gdb.python/py-frame-args.exp: Use gdb_remote_download.
* gdb.python/py-framefilter-mi.exp: Use gdb_remote_download.
* gdb.python/py-framefilter.exp: Use gdb_remote_download,
standard_output_file.
In an earlier patch I forgot to change the caching proc in cell.exp to
use standard_temp_file. This fixes the oversight.
Tested on x86-64 Fedora 18.
* lib/cell.exp (skip_cell_tests): Use standard_temp_file.
This finishes making gdb.dwarf2 parallel-safe.
To do this, this patch introduces a new gdb_remote_download proc, that
works somewhat differently in the one specific case where it matters:
for a copy to "host", if no destination was given, and the host is not
actually remote, then standard_output_file is used. In parallel mode
this guarantees that the resulting file will end up in a parallel-safe
location.
Tested on x86-64 Fedora 18.
* gdb.dwarf2/dw2-basic.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-compressed.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-intercu.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-intermix.exp: Use gdb_remote_download.
* gdb.dwarf2/dw2-producer.exp: Use gdb_remote_download.
* gdb.dwarf2/mac-fileno.exp: Use gdb_remote_download.
* lib/gdb.exp (gdb_remote_download): New proc.
This fixes a few gdb.dwarf2 tests to be more parallel-safe. This
mostly amounts to changing them to write their files into the
directory designated by standard_output_file.
Built and regtested on x86-64 Fedora 18.
* gdb.dwarf2/clztest.exp: Use standard_testfile.
* gdb.dwarf2/dw2-minsym-in-cu.exp: Use standard_testfile.
* gdb.dwarf2/fission-base.S: Remove directory from
DW_AT_GNU_dwo_name.
* gdb.dwarf2/fission-base.exp: Use build_executable. Set
debug-file-directory.
* gdb.dwarf2/fission-reread.S: Remove directory from
DW_AT_GNU_dwo_name.
* gdb.dwarf2/fission-reread.exp: Use build_executable. Set
debug-file-directory.
In entry-values.exp, we have a test where the entry value of 'j' is
unavailable, so it is expected that printing j@entry yields
"<unavailable>". However, the actual output is:
(gdb) frame
#0 0x0000000000400540 in foo (i=0, i@entry=2, j=2, j@entry=<error reading variable: Cannot access memory at address 0x6009e8>)
The error is thrown here:
#0 throw_it (reason=RETURN_ERROR, error=MEMORY_ERROR, fmt=0x8cd550 "Cannot access memory at address %s", ap=0x7fffffffc8e8) at ../../src/gdb/exceptions.c:373
#1 0x00000000005e2f9c in throw_error (error=MEMORY_ERROR, fmt=0x8cd550 "Cannot access memory at address %s") at ../../src/gdb/exceptions.c:422
#2 0x0000000000673a5f in memory_error (status=5, memaddr=6293992) at ../../src/gdb/corefile.c:204
#3 0x0000000000673aea in read_memory (memaddr=6293992, myaddr=0x7fffffffca60 "\200\316\377\377\377\177", len=4) at ../../src/gdb/corefile.c:223
#4 0x00000000006784d1 in dwarf_expr_read_mem (baton=0x7fffffffcd50, buf=0x7fffffffca60 "\200\316\377\377\377\177", addr=6293992, len=4) at ../../src/gdb/dwarf2loc.c:334
#5 0x000000000067645e in execute_stack_op (ctx=0x1409480, op_ptr=0x7fffffffce87 "\237<\005@", op_end=0x7fffffffce88 "<\005@") at ../../src/gdb/dwarf2expr.c:1045
#6 0x0000000000674e29 in dwarf_expr_eval (ctx=0x1409480, addr=0x7fffffffce80 "\003\350\t`", len=8) at ../../src/gdb/dwarf2expr.c:364
#7 0x000000000067c5b2 in dwarf2_evaluate_loc_desc_full (type=0x10876d0, frame=0xd8ecc0, data=0x7fffffffce80 "\003\350\t`", size=8, per_cu=0xf24c40, byte_offset=0)
at ../../src/gdb/dwarf2loc.c:2236
#8 0x000000000067cc65 in dwarf2_evaluate_loc_desc (type=0x10876d0, frame=0xd8ecc0, data=0x7fffffffce80 "\003\350\t`", size=8, per_cu=0xf24c40)
at ../../src/gdb/dwarf2loc.c:2407
#9 0x000000000067a5d4 in dwarf_entry_parameter_to_value (parameter=0x13a7960, deref_size=18446744073709551615, type=0x10876d0, caller_frame=0xd8ecc0, per_cu=0xf24c40)
at ../../src/gdb/dwarf2loc.c:1160
#10 0x000000000067a962 in value_of_dwarf_reg_entry (type=0x10876d0, frame=0xd8de70, kind=CALL_SITE_PARAMETER_DWARF_REG, kind_u=...) at ../../src/gdb/dwarf2loc.c:1310
#11 0x000000000067aaca in value_of_dwarf_block_entry (type=0x10876d0, frame=0xd8de70, block=0xf1c2d4 "Q", block_len=1) at ../../src/gdb/dwarf2loc.c:1363
#12 0x000000000067e7c9 in locexpr_read_variable_at_entry (symbol=0x13a7540, frame=0xd8de70) at ../../src/gdb/dwarf2loc.c:3326
#13 0x00000000005daab6 in read_frame_arg (sym=0x13a7540, frame=0xd8de70, argp=0x7fffffffd0e0, entryargp=0x7fffffffd100) at ../../src/gdb/stack.c:362
#14 0x00000000005db384 in print_frame_args (func=0x13a7470, frame=0xd8de70, num=-1, stream=0xea3890) at ../../src/gdb/stack.c:669
#15 0x00000000005dc338 in print_frame (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC, print_args=1, sal=...) at ../../src/gdb/stack.c:1199
#16 0x00000000005db8ee in print_frame_info (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC, print_args=1) at ../../src/gdb/stack.c:851
#17 0x00000000005da2bb in print_stack_frame (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC) at ../../src/gdb/stack.c:169
#18 0x00000000005de236 in frame_command (level_exp=0x0, from_tty=1) at ../../src/gdb/stack.c:2265
dwarf2_evaluate_loc_desc_full (frame #7) knows to handle
NOT_AVAILABLE_ERROR errors, but read_memory always throws
a generic error.
Presently, only the value machinery knows to handle unavailable
memory. We need to push the awareness down to the target_xfer layer,
making it return a finer grained error indication. We can only return
a generic -1 nowadays, which leaves the upper layers with no clue on
why the xfer failed. Use target_xfer_partial directly, rather than
propagating the error through target_read_memory so as to get a better
address to display in the error message.
(target_read_memory & friends build on top of target_read (thus the
target_xfer machinery), but turn all errors to EIO, an errno value. I
think this is a mistake, and we'd better convert all these to return a
target_xfer_error too, but that can be done separately. I looked
around a bit over memory_error calls, and the need to handle random
errno values, other than the EIOs gdb itself hardcodes, probably comes
(only) from deprecated_xfer_memory, which uses errno for error
indication, but I didn't look exhaustively. We should really get rid
of deprecated_xfer_memory and of passing down errno values as error
indication in target_read & friends methods).
Tested on x86_64 Fedora 17, native and gdbserver. Fixes the test in
the PR, which will be added to the testsuite later.
gdb/
2013-08-22 Pedro Alves <palves@redhat.com>
PR gdb/15871
* corefile.c (target_xfer_memory_error): New function.
(memory_error): Defer EIO to target_memory_error.
(read_memory): Use target_xfer_partial, and handle finer-grained
target xfer errors.
* target.c (target_xfer_error_to_string): New function.
(memory_xfer_partial_1): If memory is known to be
unavailable, return TARGET_XFER_E_UNAVAILABLE instead of -1.
(target_xfer_partial): Make extern.
* target.h (enum target_xfer_error): New enum.
(target_xfer_error_to_string): Declare function.
(target_xfer_partial): Declare function.
(struct target_ops) <xfer_partial>: Adjust describing comment.
* coff-rs6000.c (_bfd_xcoff_sizeof_headers): Also count
.ovrflo sections.
* coffcode.h (coff_compute_section_file_positions): Force
match between file offset and vma offset.
(pending_macros): Ditto.
(get_macro_table): New function.
(buildsym_init): Initialize subfile_stack.
* coffread.c (type_vector,type_vector_length): Moved here from
buildsym.h.
(INITIAL_TYPE_VECTOR_LENGTH): Ditto.
(coff_symtab_read): Use it.
* dbxread.c (read_ofile_symtab): Delete init of subfile_stack.
* dwarf2read.c (macro_start_file): Replace uses of pending_macros
with call to get_macro_table.
* stabsread.c (type_vector,type_vector_length): Moved here from
buildsym.h.
(INITIAL_TYPE_VECTOR_LENGTH): Ditto.
* buildsym.h (get_macro_table): Declare.
This fixes PR python/15816.
The bug here is that python-selftest.exp can fail:
No symbol "RETURN_MASK_ALL" in current context.
RETURN_MASK_ALL is a macro, so if macros do not end up in the
debuginfo (very typical) then the test fails.
It seemed simplest to me to simply turn the RETURN_MASK_ defines into
enum constants. This way they end up in the debuginfo and all is
well.
PR python/15816:
* exceptions.h (return_mask): Now an enum.
(RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL): Now
enum constants.
Built and regtested on x86-64 Fedora 18.
This moves the "gdbarch" field from the objfile into the BFD.
This field's value is derived from the BFD and is immutable over the
lifetime of the BFD. This makes it a reasonable candidate for pushing
into the per-BFD object.
This is part of the long-term objfile splitting project. In the long
run I think this patch will make it simpler to moves types from the
objfile to the per-BFD object; but the patch makes sense as a minor
cleanup by itself.
Built and regtested on x86-64 Fedora 18.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
get_objfile_arch.
* elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
* jit.c (jit_object_close_impl): Update.
* jv-lang.c (get_dynamics_objfile): Update.
* linespec.c (add_minsym): Use get_dynamics_objfile.
* objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
(allocate_objfile): Don't initialize 'gdbarch' field.
(get_objfile_arch): Update.
* objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
moved from...
(struct objfile) <gdbarch>: ... here. Remove.
* stap-probe.c (stap_can_evaluate_probe_arguments): Use
get_objfile_arch.
* symfile.c (init_entry_point_info): Use get_objfile_arch.
for IBM long double nan and inf.
(floatformat_is_negative, floatformat_classify,
floatformat_mantissa): Similarly.
(floatformat_ieee_single, floatformat_ieee_double,
floatformat_ieee_quad, floatformat_arm_ext,
floatformat_ia64_spill): Delete unused vars.
(_initialize_doublest): Delete unused function.
* gdbtypes.c (floatformats_ibm_long_double): Use new big- and
little-endian variants of floatformat_ibm_long_double.
