Also adds s390 support to gdb.trace testsuite.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_tracepoints): New function.
(struct linux_target_ops): Fill supports_tracepoints hook.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for s390.
* gdb.trace/mi-trace-frame-collected.exp: Expect 4 registers on s390.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for s390, add gpr0num
variable for GPR 0 instead of assuming it is register 0.
* gdb.trace/trace-common.h: Add s390 fast tracepoint placeholder.
* lib/trace-support.exp: Add s390 registers.
Pass "debug" to prepare_for_testing otherwise, some tests fail.
gdb/testsuite:
2016-03-29 Yao Qi <yao.qi@linaro.org>
* gdb.arch/arm-neon.exp: Pass debug to prepare_for_testing.
* cpustate.c: Remove space after asterisk in function parameters.
* decode.h (greg): Delete unused function.
(vreg, shift, extension, scaling, writeback, condcode): Likewise.
* simulator.c: Use INSTR macro in more places.
(HALT_NYI): Use sim_io_eprintf in place of fprintf.
Remove extraneous whitespace.
PR 17334
* elf32-bfin.c (elf32_bfinfdpic_finish_dynamic_sections): Relax
assertion on the size of the got section to allow it to be bigger
than the number of relocs.
This name describes what the variable means slightly better, and the enum with
two values that is only used for this one variable is kind of silly.
gas/ChangeLog:
2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* as.c (parse_args): Adjust.
* as.h (flag_size_check): Rename to flag_allow_nonconst_size.
* config/obj-elf.c (elf_frob_symbol): Adjust.
In the SPARC V9 (and later) versions of the SPARC specification, the
section C.1.1 "Register Names" specifies that:
"asr_reg. An asr_reg is an Ancillary State Register name. It may have
one of the following values:
%asr16-%asr31"
The rationale of having this restriction was that the registers from 16
to 31 are reserved to implementations, and are therefore "non-V9". It
also assumes that the existing ASR registers in the range 0..31 will
have their own names such as %y, that can be used to access such
registers.
However, this is problematic. When a new ASR register is introduced,
such as %mcdper a.k.a. %asr14, it is useful to be able to use %asr14 in
order to not depend on the latest version of the assembler.
The Solaris assembler is lax and allows to assembly instructions
referring to %asr0 to %asr31. This patch makes the GNU assembler to
mimic that behavior.
gas/ChangeLog:
2016-03-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Remove the V9 restriction on ASR
registers to be in the 16..31 range.
This patch changes the location of several variants of the `wr'
instruction in sparc_opcodes. This is to get the assembler to emit the
right diagnostics when an invalid %asrN register is used in an
instruction.
frag_var () assigns its last argument to frag::fr_opcode, and it turns out
some targets modify the string that points to. However it appears niether the
generic code or the microblaze code modifies what fr_opcode points to, so this
code should be safe. So we unfortunately need to cast to char * when passing
an argument to frag_var () but otherwise microblaze can itself point to these
strings with const char *.
gas/ChangeLog:
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-microblaze.c (md_assemble): Cast opc to char * when calling
frag_var ().
I'm not sure the string it returns is particularly useful, or better than the
string returned by other atof implementations on failure, but given the others
return a localized string it seems like this one should too.
gas/ChangeLog:
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-visium.c (md_atof): Localize the string returned on
failure.
I happen to see a quotation mark is missing the following test,
gdb_test "break $end_location" \
"Breakpoint $decimal at .* line $end_location\." \
set breakpoint at end of main"
so the test result is
PASS: gdb.reverse/break-reverse.exp: set
This patch is to add the missing quotation mark back, and the test
result becomes
PASS: gdb.reverse/break-reverse.exp: set breakpoint at end of main
gdb/testsuite:
2016-03-24 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/break-reverse.exp: Add quotation mark in the
test message.
* cpustate.c (aarch64_get_FP_half): New function. Read a vector
register as a half precision floating point number.
(aarch64_set_FP_half): New function. Similar, but for setting
a half precision register.
(aarch64_get_thread_id): New function. Returns the value of the
CPU's TPIDR register.
(aarch64_get_FPCR): New function. Returns the value of the CPU's
floating point control register.
(aarch64_set_FPCR): New function. Set the value of the CPU's FPCR
register.
* cpustate.h: Add prototypes for new functions.
* sim-main.h (struct _sim_cpu): Add FPCR and tpidr fields.
* memory.c: Use unaligned core access functions for all memory
reads and writes.
* simulator.c (HALT_NYI): Generate an error message if tracing
will not tell the user why the simulator is halting.
(HALT_UNREACHABLE): Delete. Delete (unneeded) uses of the macro.
(INSTR): New time-saver macro.
(fldrb_abs): New function. Loads an 8-bit value using a scaled
offset.
(fldrh_abs): New function. Likewise for 16-bit values.
(do_vec_SSHL): Allow for negative shift values.
(do_vec_USHL): Likewise.
(do_vec_SHL): Correct computation of shift amount.
(do_vec_SSHR_USHR): Correct decision of signed vs unsigned
shifts and computation of shift value.
(clz): New function. Counts leading zero bits.
(do_vec_CLZ): New function. Implements CLZ (vector).
(do_vec_MOV_element): Call do_vec_CLZ.
(dexSimpleFPCondCompare): Implement.
(do_FCVT_half_to_single): New function. Implements one of the
FCVT operations.
(do_FCVT_half_to_double): New function. Likewise.
(do_FCVT_single_to_half): New function. Likewise.
(do_FCVT_double_to_half): New function. Likewise.
(dexSimpleFPDataProc1Source): Call new FCVT functions.
(do_scalar_SHL): Handle negative shifts.
(do_scalar_shift): Handle SSHR.
(do_scalar_USHL): New function.
(do_double_add): Simplify to just performing a double precision
add operation. Move remaining code into...
(do_scalar_vec): ... New function.
(dexLoadUnsignedImmediate): Call new fldrb_abs and fldrh_abs
functions.
(system_get): Add support for TPIDR, CTR, FPCR, FPSR and CPSR
registers.
(system_set): New function.
(do_MSR_immediate): New function. Stub for now.
(do_MSR_reg): New function. Likewise. Partially implements MSR
instruction.
(do_SYS): New function. Stub for now,
(dexSystem): Call new functions.
This comment is out of date. We've already done that. Patch is to remove
it.
gdb:
2016-03-23 Yao Qi <yao.qi@linaro.org>
* gdbarch.sh (software_single_step): Remove comments.
* gdbarch.h: Regenerated.
if the condition is true then we know that str already points to a'\0' in the
string passed to the function. Since we know the latter part of the function
doesn't modify that string, and str already points to a null byte there's no
point in changing str to point to a literal empty string.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-pdp11.c (md_assemble): Remove useless if and assignment to
str.
This lets us avoid assigning a literal to a char *, and perhaps more
importantly makes it clearer what is going on here.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (sparc_regname_to_dw2regnum): Replace strchr ()
call with a switch.
This increases consistancy of how we allocate memory, and always casting the
result to the proper type. It also helps make sure we get any use of sizeof on
the result type correct.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* listing.c (listing_message): Use XNEW style allocation macros.
* read.c (read_a_source_file): Likewise.
(read_symbol_name): Likewise.
(s_mri_common): Likewise.
(assign_symbol): Likewise.
(s_reloc): Likewise.
(emit_expr_with_reloc): Likewise.
(s_incbin): Likewise.
(s_include): Likewise.
* sb.c (sb_build): Likewise.
(sb_check): Likewise.
PR ld/19803
* ldlang.c (lang_add_gc_name): New function. Adds the provided
symbol name to the list of gc symbols.
(lang_process): Call lang_add_gc_name with entry_symbol_default if
entry_symbol.name is NULL. Use lang_add_gc_name to add the init
and fini function names.
* pe-dll.c (process_def_file_and_drectve): Add exported names to
the gc symbol list.
* testsuite/ld-pe/pr19803.s: Do not export _testval symbol.
* testsuite/ld-pe/pr19803.d: Tweak expected output.
One of the tic54x testcases looks for a section alignment of 1. After
9136aa49 the alignment became 0. While it happens that an alignment
of 0 is treated as an alignment of 1, there is no reason to not apply
the explicit alignment.
* write.c (record_alignment): Revert 2016-02-18 change.
bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a
sufficiently recent version of GCC.
* configure: Regenerate.
others * configure: Regenerate.
During LTO, if (1) an IR file contains a COMDAT group that is kept,
(2) a later non-claimed file contains the same group, which we discard,
and (3) the plugin fails to provide a definition of the symbols in that
COMDAT group, gold silently resolves any references to those symbols
to 0.
This patch adds a check for a placeholder symbol when deciding
whether to issue an undefined symbol error. It also adds an extra
note after any undefined placeholder symbol error that explains
that a definition was expected from the plugin.
gold/
PR gold/19842
* errors.cc (Errors::undefined_symbol): Add info message when
symbol should have been provided by a plugin.
* target-reloc.h (issue_undefined_symbol_error): Check for
placeholder symbols defined in discarded sections.
* testsuite/Makefile.am (plugin_test_9b): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test_9b_elf.cc: New test source file.
* testsuite/plugin_test_9b_ir.cc: New test source file.
Adds the first few nps400 instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-0.d: New file.
* testsuite/gas/arc/nps400-0.s: New file.
* testsuite/gas/arc/nps400-1.d: New file.
* testsuite/gas/arc/nps400-1.s: New file.
include/ChangeLog:
* opcodes/arc.h (insn_class_t): Add BITOP type.
opcodes/ChangeLog:
* arc-nps400-tbl.h: New file.
* arc-opc.c: Add top level comment.
(insert_nps_3bit_dst): New function.
(extract_nps_3bit_dst): New function.
(insert_nps_3bit_src2): New function.
(extract_nps_3bit_src2): New function.
(insert_nps_bitop_size): New function.
(extract_nps_bitop_size): New function.
(arc_flag_operands): Add nps400 entries.
(arc_flag_classes): Add nps400 entries.
(arc_operands): Add nps400 entries.
(arc_opcodes): Add nps400 include.
When parsing the operand instruction flags we don't currently detect the
case where multiple flags are provided from the same class set, these
will be accepted and the bit values merged together, resulting in the
wrong instruction being assembled. For example:
adc.n.eq r0,r0,r2
Will assemble without error, yet, upon disassembly, the instruction will
actually be:
adc.c r0,r0,r2
In a later commit the concept of required flags will be introduced.
Required flags are just like normal instruction flags, except that they
must be present for the instruction to match. Adding this will allow
for simpler instructions in the instruction table, and allow for more
sharing of operand extraction and insertion functions.
To solve both of the above issues (multiple flags being invalid, and
required flags), this commit reworks the flag class mechanism.
Currently the flag class is never used. Each instruction can reference
multiple flag classes, each flag class has a class type and a set of
flags. However, at present, the class type is never used. The current
values identify the type of instruction that the flag will be used in,
but this is not required information.
Instead, this commit discards the old flag classes, and introduces 3 new
classes. The first F_CLASS_NONE, is just a NULL marker value, and is
only used in the NULL marker flag class. The other two flag classes are
F_FLAG_OPTIONAL, and F_FLAG_REQUIRED.
The class F_FLAG_OPTIONAL has the property that at most one of the flags
in the flag set for that class must be present in the instruction. The
"at most" one means that no flags being present is fine.
The class F_FLAG_REQUIRED is not currently used, but will be soon. With
this class, exactly one of the flags from this class must be present in
the instruction. If the flag class contains a single flag, then of
course that flag must be present. However, if the flag class contained
two or more, then one, and only one of them must be present.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Move lnflg, and i
declarations to start of block. Reset code on all flags before
attempting to match them. Handle multiple hits on the same flag.
Handle flag class.
* testsuite/gas/arc/asm-errors.d: New file.
* testsuite/gas/arc/asm-errors.err: New file.
* testsuite/gas/arc/asm-errors.s: New file.
include/ChangeLog:
* opcode/arc.h (flag_class_t): Remove all old flag classes, add 3
new classes instead.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_classes): Convert all flag classes to use
the new class enum values.
This commit introduces the nps400 machine type as a variant of arc.
There's a new flag in the assembler to select this machine type. All
other changes are just adding handling of the new machine type into the
relevant places.
The nps400 is an arc700 variant with some vendor specific instructions
added into the instruction set. This commit does not add any of the new
instructions, this is just laying the groundwork for future commits.
However, in preparation for these new instructions a new opcode define for
nps400 has been added to include/opcode/arc.h, this new opcode define is
used in the assembler and disassembler along with the existing define
for arc700 such that when assembling and disassembling for nps400 the
user will have access to all arc700 instructions and all the nps400
vendor extension instructions.
bfd/ChangeLog:
* archures.c (bfd_mach_arc_nps400): Define.
* bfd-in2.h: Regenerate.
* cpu-arc.c (arch_info_struct): New entry for nps400, renumber
some existing entries to make space.
* elf32-arc.c (arc_elf_object_p): Add nps400 case.
(arc_elf_final_write_processing): Likewise.
binutils/ChangeLog:
* readelf.c (decode_ARC_machine_flags): Handle nps400.
gas/ChangeLog:
* config/tc-arc.c (cpu_types): Add nps400 entry.
(check_zol): Handle nps400.
include/ChangeLog:
* elf/arc.h (E_ARC_MACH_NPS400): Define.
* opcode/arc.h (ARC_OPCODE_NPS400): Define.
opcodes/ChangeLog:
* arc-dis.c (print_insn_arc): Handle nps400.
