Nick recently wrapped most of aarch64-tbl.h entries in macros
like CORE_INSN. These new macros assumed that the aarch64_op
"op" field of aarch64_opcode is 0 and that the new "verifier"
field is NULL.
However, there are a lot of CORE, SIMD and FP insns whose table
entries need a nonzero aarch64_op field, so these entries
continued to use a braced list instead of a macro. This makes
the table entries less consistent and means that there are still
quite a few braced entries that need to be updated when making
further changes to the aarch64_opcode structure.
I think the number of entries that need a nonzero aarch64_op
field is high enough to justify having an explicit aarch64_op
entry for all CORE, SIMD and FP entries. This patch adds
one and updates all existing uses of the macros. A following
patch makes more use of the macros.
I've followed existing practice by using 0 instead of OP_NIL
for empty aarch64_op fields. Empty fields are still the norm
and you need to know what the fields are when reading the table
anyway, so it was hard to justify an additional patch to replace
all 0 op fields with OP_NIL.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN): Add OP parameter.
(aarch64_opcode_table): Update uses accordingly.
Loading a core dump that was either generated on a system running
pristine glibc master, or on a Fedora/RHEL system with LD_DEBUG=unused
set in the environment, solib-svr4.c:svr4_current_sos fails to filter
out the vDSO, resulting in:
(gdb) core-file corefile.core^M
[New LWP 2362]^M
warning: Could not load shared library symbols for linux-vdso.so.1.^M
Do you need "set solib-search-path" or "set sysroot"?^M
Core was generated by `build-gdb/gdb/testsuite/outputs/gdb.base/corefile/'.^M
...
The problem is that gdbarch_vsyscall_range does not support core
inferiors at all.
When live debugging, we're finding the vDSO's start address with
auxv/AT_SYSINFO_EHDR, and then we find the vDSO's size by look for the
corresponding mapping, by parsing /proc/PID/maps. When debugging a
core dump, we can also determine the starting address from
auxv/AT_SYSINFO_EHDR. However, we obviously can't read the core
mappings out of the host's /proc. But we can instead look for a
corresponding load segment in the core's bfd.
gdb/ChangeLog:
2016-08-22 Pedro Alves <palves@redhat.com>
PR gdb/20505
* linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
find the vDSO's start address with AT_SYSINFO_EHDR too, and
determine the vDSO's size by finding the PT_LOAD segment that
matches AT_SYSINFO_EHDR.
gdb/testsuite/ChangeLog:
2016-08-22 Pedro Alves <palves@redhat.com>
PR gdb/20505
* gdb.base/vdso-warning.exp: Test core dumps too. Use
with_test_prefix. Factor out bits to ...
(test_no_vdso): ... this new procedure.
The pr19784 tests fail on ppc32 due to a gcc bug. The failure should
be noticed when building both libpr19784a.so and libpr19784b.so,
rather than ld building a buggy libpr19784a.so that fails at run time.
This patch fixes that by moving the @local ifunc check out of
check_relocs, where a call destination may not yet be known to be
ifunc. The patch also adds a related error for -mbss-plt code.
* elf32-ppc.c (ppc_elf_check_relocs): Move error for @local ifunc..
(ppc_elf_relocate_section): ..to here. Comment. Error on
detecting -mbss-plt -fPIC local ifuncs too.
(ppc_elf_size_dynamic_sections): Comment on unnecessary glink
branch table entries.
This patch fixes an issues with six test suite expect files that do not
run correctly when the test suite is not built in the source directory. The
issue is these tests are not using the current "standard_testfile" call
but rather using the older set command to initialize the "testfile",
"srcfile" and "binprefix" variables or are missing the set for the
"binprefix" variable.
-----------------------------------------------
gdb/testsuite/ChangeLog
2016-08-19 Carl Love <cel@us.ibm.com>
* gdb.arch/altivec-regs.exp: Use standard_testfile instead of
maintaining separate logic for constructing the output path.
* gdb.arch/powerpc-d128-regs.exp: Likewise.
* gdb.arch/ppc-dfp.exp: Likewise.
* gdb.arch/ppc-fp.exp: Likewise.
* gdb.arch/vsx-regs.exp: Likewise.
* gdb.arch/altivec-abi.exp: Likewise, plus added local variable
binprefix for generating the additional binary files.
Nowadays, we only match pre-indexed STP in prologue. Due to the change
in gcc, https://gcc.gnu.org/ml/gcc-patches/2016-07/msg01933.html, it
may generate "STP with base register" in prologue, which GDB doesn't
handle. That is to say, previously GCC generates prologue like this,
sub sp, sp, #490
stp x29, x30, [sp, #-96]!
mov x29, sp
with the gcc patch above, GCC generates prologue like like this,
sub sp, sp, #4f0
stp x29, x30, [sp]
mov x29, sp
This patch is to teach GDB to recognize this instruction in prologue
analysis.
gdb:
2016-08-19 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_analyze_prologue): Handle register
based STP instruction.
If I build gdb with -fsanitize=address and run tests, I get error,
malformed linespec error: unexpected colon^M
(gdb) PASS: gdb.linespec/ls-errs.exp: lang=C: break :
break :=================================================================^M
==3266==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000051451 at pc 0x2b5797a972a8 bp 0x7fffd8e0f3c0 sp 0x7fffd8e0f398^M
READ of size 2 at 0x602000051451 thread T0
#0 0x2b5797a972a7 in __interceptor_strlen (/usr/lib/x86_64-linux-gnu/libasan.so.1+0x322a7)^M
#1 0x7bd004 in compare_filenames_for_search(char const*, char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:316^M
#2 0x7bd310 in iterate_over_some_symtabs(char const*, char const*, int (*)(symtab*, void*), void*, compunit_symtab*, compunit_symtab*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:411^M
#3 0x7bd775 in iterate_over_symtabs(char const*, int (*)(symtab*, void*), void*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:481^M
#4 0x7bda15 in lookup_symtab(char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:527^M
#5 0x7d5e2a in make_file_symbol_completion_list_1 /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:5635^M
#6 0x7d61e1 in make_file_symbol_completion_list(char const*, char const*, char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/symtab.c:5684^M
#7 0x88dc06 in linespec_location_completer /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:288
....
0x602000051451 is located 0 bytes to the right of 1-byte region [0x602000051450,0x602000051451)^M
mallocated by thread T0 here:
#0 0x2b5797ab97ef in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.1+0x547ef)^M
#1 0xbbfb8d in xmalloc /home/yao/SourceCode/gnu/gdb/git/gdb/common/common-utils.c:43^M
#2 0x88dabd in linespec_location_completer /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:273^M
#3 0x88e5ef in location_completer(cmd_list_element*, char const*, char const*) /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:531^M
#4 0x8902e7 in complete_line_internal /home/yao/SourceCode/gnu/gdb/git/gdb/completer.c:964^
The code in question is here
file_to_match = (char *) xmalloc (colon - text + 1);
strncpy (file_to_match, text, colon - text + 1);
it is likely that file_to_match is not null-terminated. The patch is
to strncpy 'colon - text' bytes and explicitly set '\0'.
gdb:
2016-08-19 Yao Qi <yao.qi@linaro.org>
* completer.c (linespec_location_completer): Make file_to_match
null-terminated.
gdb.trace/mi-trace-frame-collected.exp has a couple failures on x32:
FAIL: gdb.trace/mi-trace-frame-collected.exp: live: -trace-frame-collected (register)
FAIL: gdb.trace/mi-trace-frame-collected.exp: tfile: -trace-frame-collected (register)
gdb.log:
-trace-frame-collected
^done,explicit-variables=[{name="gdb_char_test",value="0 '\\000'"}],computed-expressions=[],registers=[{number="16",value="0x4004dc"},{number="204",value="0x4004dc"}],tvars
=[],memory=[{address="0x00601060",length="1"}]
(gdb)
FAIL: gdb.trace/mi-trace-frame-collected.exp: live: -trace-frame-collected (register)
[...]
-trace-frame-collected
^done,explicit-variables=[{name="gdb_char_test",value="0 '\\000'"}],computed-expressions=[],registers=[{number="16",value="0x4004dc"},{number="204",value="0x4004dc"}],tvars
=[],memory=[{address="0x00601060",length="1"}]
(gdb)
FAIL: gdb.trace/mi-trace-frame-collected.exp: tfile: -trace-frame-collected (register)
This test only collects the PC, and thus expects to only see one
register in the output of -trace-frame-collected. However, while on
the 64-bit ABI gdb only exposes 64-bit $pc/$rip (register 16 above),
on x32, GDB exposes 32-bit $eip as well, as a pseudo-register
(register 204 above). Thus, collecting $pc/$rip automatically always
collects $eip as well.
gdb/testsuite/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* gdb.trace/mi-trace-frame-collected.exp
(test_trace_frame_collected): On x32, expect two registers.
Running the fast tracepoints tests against x32 gdbserver exposes a
latent bug. E.g.,:
(gdb)
continue
Continuing.
Reading /media/sf_host-pedro/gdb/mygit/build-ubuntu-x32/gdb/testsuite/outputs/gdb.trace/change-loc/change-loc-2.sl from remote target...
Thread 1 "change-loc" received signal SIGSEGV, Segmentation fault.
func4 () at /home/pedro/gdb/src/gdb/testsuite/gdb.trace/change-loc.h:24
24 }
(gdb) FAIL: gdb.trace/change-loc.exp: 1 ftrace: continue to marker 2
The test sets a fast tracepoint on a shared library. On x32, shared
libraries end up loaded somewhere in the upper 2GB of the 4GB address
space x32 has access to. When gdbserver needs to copy an instruction
to execute it in the jump pad, it asks gdb to relocate/adjust it, with
the qRelocInsn packet. gdb converts "call" instructions into a "push
$<2GB-4GB addr> + jmp" sequence, however, the "pushq" instruction sign
extends its operand, so later when the called function returns, it
returns to an incorrectly sign-extended address. E.g.,
0xfffffffffabc0000 instead of 0xfabc0000, resulting in the
segmentation fault.
Fix this by converting calls at such addresses to "sub + mov + jmp"
sequences instead.
gdb/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_relocate_instruction) <callq>: Handle return
addresses over 0x7fffffff.
Running fast tracepoint tests on x32 exposes a latent bug in the agent
bytecode jitting. There's a code path that forgets to emit the call
opcode... Whoops. Fixes a bunch of gdb.trace/trace-condition.exp
FAILs, like:
(gdb)
continue
Continuing.
Thread 1 "trace-condition" received signal SIGSEGV, Segmentation fault.
0x7ffec016 in ?? ()
(gdb) FAIL: gdb.trace/trace-condition.exp: ftrace: $rip == *set_point: advance through tracing
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (amd64_emit_call): Emit missing call opcode.
We're casting through unsigned long to write a 64-bit immediate
operand of movabs (the comment said movl, but that was incorrect).
The problem is that unsigned long is 32-bit on x32, so we were writing
fewer bytes than necessary.
Fix this by using an 8 byte memcpy like in other similar places in the
function.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (amd64_install_fast_tracepoint_jump_pad): Fix
comment. Use memcpy instead of casting through unsigned long.
MAP_32BIT is ignored on x32, meaning the jump pad can end up somewhere
between 2GB and 4GB, too far away from the executable for 5-byte
relative jumps (JMP rel32). So on x32, try explicitly placing the
jump pad near the middle of the available address space.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
* linux-amd64-ipa.c (alloc_jump_pad_buffer) [__ILP32__]: Try
allocating around 0x80000000.
Building GDB for x32 fails building the IPA, with:
.../src/gdb/gdbserver/linux-amd64-ipa.c: In function ‘const target_desc* get_ipa_tdesc(int)’:
.../src/gdb/gdbserver/linux-amd64-ipa.c:182:14: error: ‘tdesc_amd64_avx_linux’ was not declared in this scope
return tdesc_amd64_avx_linux;
^
.../src/gdb/gdbserver/linux-amd64-ipa.c:184:14: error: ‘tdesc_amd64_mpx_linux’ was not declared in this scope
return tdesc_amd64_mpx_linux;
^
.../src/gdb/gdbserver/linux-amd64-ipa.c:186:14: error: ‘tdesc_amd64_avx_mpx_linux’ was not declared in this scope
return tdesc_amd64_avx_mpx_linux;
^
[...]
The problem is that the IPA is trying to use the 64-bit descriptions,
when it should be using the x32 ones.
gdb/gdbserver/ChangeLog:
2016-08-19 Pedro Alves <palves@redhat.com>
PR gdb/20415
* Makefile.in (x32-linux-ipa.o, x32-avx-linux-ipa.o)
(x32-avx512-linux-ipa.o): New rules.
* configure.ac (x86_64-*-linux*): New x32 check.
* configure.srv (ipa_x32_linux_regobj): New.
(x86_64-*-linux*): Use $ipa_x32_linux_regobj if building for x32.
* linux-amd64-ipa.c (get_ipa_tdesc) [__ILP32__]: Return x32
descriptions.
(initialize_low_tracepoint) [__ILP32__]: Initialize x32
descriptions.
* configure: Regenerate.
At the cost of an extra field in the symbol table hash entries, this
simplification to the relocate_section dynamic reloc test should help
maintainability.
* elf64-ppc.c (struct ppc_link_hash_entry): Add weakref.
(ppc64_elf_copy_indirect_symbol): Set weakref. Don't merge
dyn_relocs for weakdefs.
(alias_readonly_dynrelocs): New function.
(ppc64_elf_adjust_dynamic_symbol): Use alias_readonly_dynrelocs.
(ppc64_elf_relocate_section): Simplify condition under which
dyn_relocs are emitted.
This patch fixes quite a lot of confusion in allocate_dynrelocs over
ifuncs. Function descriptors make ELFv1 quite different to ELFv2.
PR 20472
* elf64-ppc.c (ppc64_elf_before_check_relocs): Tweak abiversion test.
(readonly_dynrelocs): Comment fix.
(global_entry_stub): New function.
(ppc64_elf_adjust_dynamic_symbol): Tweak abiversion test. Match
ELFv2 code deciding on dynamic relocs vs. global entry stubs to
that in size_global_entry_stubs, handling ifunc too. Delete dead
weak sym code.
(allocate_dynrelocs): Ensure dyn_relocs field is cleared when no
dyn_relocs are needed. Correct handling of ifunc dyn_relocs.
Tidy ELIMINATE_COPY_RELOCS code, only setting dynindx for
undefweak syms. Expand and correct comments.
(size_global_entry_stubs): Ensure symbol is defined.
(ppc64_elf_relocate_section): Match condition under which
dyn_relocs are emitted to that in allocate_dynrelocs.
gdb/ChangeLog:
* MAINTAINERS (Write After Approval): Add "Carl Love".
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-power.s: Add new Power9 instruction tests
and sync up the test with tests in gas/testsuite/gas/ppc.
* gdb.arch/powerpc-power.exp: Likewise.
The GDB testsuite reports 5 test failures on Power 7 instructions.
Additionally the ppc test is missing the new Power 9 instructions as
well as a large number of older instructions. Additionally, some
instruction names have changed or been deleted. This patch
fixes the test failures and completely updates the test to make it
consistent with the supported Power 9 instructions listed in:
gas/testsuite/gas/ppc/power7.d
gas/testsuite/gas/ppc/power8.d
gas/testsuite/gas/ppc/power9.d
gas/testsuite/gas/ppc/altivec.d
gas/testsuite/gas/ppc/altivec2.d
gas/testsuite/gas/ppc/altivec3.d
gas/testsuite/gas/ppc/vsx.d
gas/testsuite/gas/ppc/vsx2.d
gas/testsuite/gas/ppc/vsx3.d
-----------------------------------------------------
gdb/testsuite/ChangeLog
2016-08-18 Carl Love <cel@us.ibm.com>
* gdb.arch/powerpc-power.s: Add new Power9 instruction tests
and sync up the test with tests in gas/testsuite/gas/ppc.
* gdb.arch/powerpc-power.exp: Likewise.
The patch fixes the record support of Hardware Transactional Memory
instructions on Power. It also solves a large number of unexpected failures
from gdb.reverse testcases sigall-precsave.exp and sigall-reverse.exp that
occur on distros which glibc uses HTM instructions.
gdb/ChangeLog
2016-08-18 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* rs6000-tdep.c (ppc_process_record_op31): Handle HTM instructions.
This error message should not contain the word symbol:
(gdb) remove-inferiors 1
Warning: Can not remove current symbol inferior 1.
gdb/ChangeLog:
* inferior.c (remove_inferior_command): Fix error message.
gdb/testsuite/ChangeLog:
* gdb.multi/remove-inferiors.exp (test_remove_inferiors): Fix
expected error message.
I noticed that the remove-inferiors command was not tested, and as I am
doing some changes related to the user selection, I want to make sure I
don't break it. For example, I want to make sure it's not possible to
remove the current inferior.
gdb/testsuite/ChangeLog:
* gdb.multi/remove-inferiors.exp: New file.
* gdb.multi/remove-inferiors.c: New file.
Build the test objects with the in-tree assembler. Also fix some cascading
error messages caused by not resetting the skip_call_tls_get_addr_ flag
after printing the error.
gold/
* i386.cc (Target_i386): Reset skip_call_tls_get_addr_ after printing
error message.
* testsuite/Makefile.am (pr20216a): Add missing dependencies.
(pr20308a): Add -Bgcctestdir/ to compile rules.
* testsuite/Makefile.in: Regenerate.
The common sim tracing code already handles loading and tracking of
symbols from the target program so that it can show symbol info in
trace/disassembly calls. Once we touch up the trace code and add a
few API callbacks, ports don't need to do loading and searching of
symbol tables themselves anymore.
GLIBC BZ#20311 introduced a change to install proc_service.h so that gdb
didn't have to use the version it embeds in gdb_proc_service.h. The
embedded version is guarded by HAVE_PROC_SERVICE_H and
gdb_proc_service.h has a number other of includes and definitions, all
of which are uncondional except for an include for gregset.h. This is
only included if HAVE_PROC_SERIVCE_H is not defined.
This causes a build failure when cross compiling gdb with the latest
glibc because type definitions in gregset are used independently of
HAVE_PROC_SERIVCE_H. In particular, they are used in gdb_proc_service.h
when PRFPREGSET_T_BROKEN is set.
The error messages on the failure are
----
binutils-gdb/gdb/gdb_proc_service.h:173:9: error: ‘gdb_fpregset_t’ does
not name a type; did you mean ‘elf_fpregset_t’?
typedef gdb_fpregset_t gdb_prfpregset_t;
^~~~~~~~~~~~~~
elf_fpregset_t
binutils-gdb/gdb/gdb_proc_service.h:173:9: error: ‘gdb_fpregset_t’ does
not name a type; did you mean ‘elf_fpregset_t’?
typedef gdb_fpregset_t gdb_prfpregset_t;
^~~~~~~~~~~~~~
elf_fpregset_t
binutils-gdb/gdb/proc-service.c:218:15: error: ‘gdb_prfpregset_t’ does
not name a type; did you mean ‘gdb_fpregset_t’?
const gdb_prfpregset_t *fpregset)
^~~~~~~~~~~~~~~~
gdb_fpregset_t
----
This patch moves the include for gregset.h to before the code guarded by
HAVE_PROC_SERIVCE_H, so that it is always included. This is enough to
fix the build.
2016-08-15 Matthew Wahab <matthew.wahab@arm.com>
PR gdb/20457
* gdb_proc_service.h: Add an include of gregset.h
[!HAVE_PROC_SERVICE_H]: Remove the include of gregset.h.
I build GDB with -fsanitize=address, and see the error in tests,
(gdb) PASS: gdb.linespec/ls-errs.exp: lang=C++: break 3 foo
break -line 3 foo^M
=================================================================^M
==4401==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000047487 at pc 0x819d8e bp 0x7fff4e4e6bb0 sp 0x7fff4e4e6ba8^M
READ of size 1 at 0x603000047487 thread T0^[[1m^[[0m^M
#0 0x819d8d in explicit_location_lex_one /home/yao/SourceCode/gnu/gdb/git/gdb/location.c:502^M
#1 0x81a185 in string_to_explicit_location(char const**, language_defn const*, int) /home/yao/SourceCode/gnu/gdb/git/gdb/location.c:556^M
#2 0x81ac10 in string_to_event_location(char**, language_defn const*) /home/yao/SourceCode/gnu/gdb/git/gdb/location.c:687^
the code in question is:
> /* Special case: C++ operator,. */
> if (language->la_language == language_cplus
> && strncmp (*inp, "operator", 8) <--- [1]
> && (*inp)[9] == ',')
> (*inp) += 9;
> ++(*inp);
The error is caused by the access to (*inp)[9] if 9 is out of its bounds.
However [1] looks odd to me, because if strncmp returns true (non-zero),
the following check "(*inp)[9] == ','" makes no sense any more. I
suspect it was a typo in the code we meant to "strncmp () == 0". Another
problem in the code above is that if *inp is "operator,", we first
increment *inp by 9, and then increment it by one again, which is wrong
to me. We should only increment *inp by 8 to skip "operator", and go
back to the loop header to decide where we stop.
gdb:
2016-08-15 Yao Qi <yao.qi@linaro.org>
* location.c (explicit_location_lex_one): Compare the return
value of strncmp with zero. Don't check (*inp)[9]. Increment
*inp by 8.
A few funcs are only used locally, so mark them static to avoid warnings
due to -Wmissing-prototypes.
Some funcs cast the return value wrong, so drop them (and let void * just
work by default).
Update some prototypes to be new style.
The current machs.h mixes common enums with Blackfin-specific defines.
This causes us troubles with header inclusion order such that we can't
drop the old SIM_CPU typedef (which is duplicated in common code). By
splitting the two up, we can unwind this dependency chain, and drop the
old typedef. It also fixes building with older gcc versions.
