The common sim code provides a useful "get_string" function which reads
a C string out of the target's memory space. So rename and export it
for other people to use.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
* sparc.h: Document new format codes '4', '5', and '('.
(OPF_LOW4, RS3): New macros.
opcodes/
* sparc-dis.c (v9a_ast_reg_names): Add "cps".
(X_RS3): New macro.
(print_insn_sparc): Handle '4', '5', and '(' format codes.
Accept %asr numbers below 28.
* sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3
instructions.
gas/
* config/tc-sparc.c (v9a_asr_table): Add "cps".
(sparc_ip): Handle '4', '5' and '(' format codes.
gas/testsuite
* gas/sparc/hpcvis3.d: New test.
* gas/sparc/hpcvis3.s: New test source.
* gas/sparc/sparc.exp: Run new test.
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (INSN_TRAP): Rename to...
(INSN_NO_DELAY_SLOT): ... this.
(INSN_SYNC): Remove macro.
gas/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
as well as explicit checks for ERET and DERET when scheduling
branch delay slots.
opcodes/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(DSP_VOLA): Likewise.
(mips_builtin_opcodes): Add NODS annotation to "deret" and
"eret". Replace INSN_SYNC with NODS throughout. Use NODS in
place of TRAP for "wait", "waiti" and "yield".
* mips16-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
"restore" and "save".
* plugin-api.h
(ld_plugin_section): New struct.
(ld_plugin_get_section_count): New typedef.
(ld_plugin_get_section_type): New typedef.
(ld_plugin_get_section_name): New typedef.
(ld_plugin_get_section_contents): New typedef.
(ld_plugin_update_section_order): New typedef.
(ld_plugin_allow_section_ordering): New typedef.
(LDPT_GET_SECTION_COUNT): New enum value.
(LDPT_GET_SECTION_TYPE): New enum value.
(LDPT_GET_SECTION_NAME): New enum value.
(LDPT_GET_SECTION_CONTENTS): New enum value.
(LDPT_UPDATE_SECTION_ORDER): New enum value.
(LDPT_ALLOW_SECTION_ORDERING): New enum value.
(tv_get_section_count): New struct members.
(tv_get_section_type): New struct members.
(tv_get_section_name): New struct members.
(tv_get_section_contents): New struct members.
(tv_update_section_order): New struct members.
(tv_allow_section_ordering): New struct members.
* archive.cc (Archive::get_elf_object_for_member): Add extra parameter
to claim_file call.
* layout.cc (Layout::Layout): Initialize section_ordering_specified_,
input_section_position_, and input_section_glob_.
(read_layout_from_file): Call function section_ordering_specified.
* layout.h (is_section_ordering_specified): New function.
(section_ordering_specified): New function.
(section_ordering_specified_): New boolean member.
* main.cc(main): Call load_plugins after layout object is defined.
* output.cc (Output_section::add_input_section): Use
function section_ordering_specified to check if section ordering is
needed.
* output.cc (Output_section::add_relaxed_input_section): Use
function section_ordering_specified to check if section ordering is
needed.
(Output_section::update_section_layout): New function.
(Output_section::sort_attached_input_sections): Check if input section
must be reordered.
* output.h (Output_section::update_section_layout): New function.
* plugin.cc (get_section_count): New function.
(get_section_type): New function.
(get_section_name): New function.
(get_section_contents): New function.
(update_section_order): New function.
(allow_section_ordering): New function.
(Plugin::load): Add the new interfaces to the transfer vector.
(Plugin_manager::load_plugins): New parameter.
(Plugin_manager::all_symbols_read): New parameter.
(Plugin_manager::claim_file): New parameter. Save the elf object for
unclaimed objects.
(Plugin_manager::get_elf_object): New function.
(Plugin_manager::get_view): Change to directly use the bool to check
if get_view is called from claim_file_hook.
* plugin.h (input_objects): New function
(Plugin__manager::load_plugins): New parameter.
(Plugin_manager::claim_file): New parameter.
(Plugin_manager::get_elf_object): New function.
(Plugin_manager::in_claim_file_handler): New function.
(Plugin_manager::in_claim_file_handler_): New member.
(layout): New function.
* readsyms.cc (Read_symbols::do_read_symbols): Call the claim_file
handler with an extra parameter. Make the elf object before calling
claim_file handler.
* testsuite/plugin_test.c (get_section_count): New function pointer.
(get_section_type): New function pointer.
(get_section_name): New function pointer.
(get_section_contents): New function pointer.
(update_section_order): New function pointer.
(allow_section_ordering): New function pointer.
(onload): Check if the new interfaces exist.
2011-07-06 Tristan Gingold <gingold@adacore.com>
* mach-o.h: Move loader related definitions to
include/mach-o/loader.h. Include it.
include/mach-o/
2011-07-06 Tristan Gingold <gingold@adacore.com>
* loader.h: New file.
include/ChangeLog:
* filenames.h (HAVE_CASE_INSENSITIVE_FILE_SYSTEM): Define
on Darwin, as well as on the systems that use a DOS-like
filesystem.
libiberty/ChangeLog:
* filename_cmp.c (filename_cmp, filename_ncmp): Add handling of
HAVE_CASE_INSENSITIVE_FILE_SYSTEM.
* dwarf.c (decode_location_expression): For DW_OP_GNU_convert and
DW_OP_GNU_reinterpret, if uvalue is 0, don't add cu_offset.
Handle DW_OP_GNU_parameter_ref.
After testing the hardware with all the different dsp flags, the MM flag
triggers sign extension in all modes. So drop the limited use of it, and
the local custom helper that was also extending unsigned values. We also
can see that the flag checks in the mult/mac insns have the same behavior
with sign extending, so add a helper func to keep the logic the same in
both places.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
bfd/
* elf32-arm.c (elf32_arm_final_link_relocate): Only do bl conversion
for known functions.
(elf32_arm_swap_symbol_in): Only set ST_BRANCH_TO_ARM for function
symbols.
include/elf/
* arm.h (arm_st_branch_type): Add ST_BRANCH_UNKNOWN.
ld/testsuite/
* ld-arm/cortex-a8-far.d: Adjust expected output.
* ld-arm/arm-call1.s: Give function symbol correct type.
* ld-arm/arm-call2.s: Ditto.
* ld-arm/farcall-group4.s: Ditto.
* ld-arm/arm-elf.exp (cortex-a8-far): Define far symbols with correct
type via assembly file.
* ld-arm/cortex-a8-far-3.s: New file.
* ld-arm/abs-call-1.s: Add Thumb tests
PR ld/12696
include/
* bfdlink.h (ENUM_BITFIELD): Define.
(struct bfd_link_hash_entry): Make "type" a bitfield. Add "non_ir_ref".
(struct bfd_link_callbacks <notice>): Pass bfd_link_hash_entry pointer
rather than "name".
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Update "notice" call.
* linker.c (_bfd_link_hash_newfunc): Clear bitfields.
(_bfd_generic_link_add_one_symbol): Update "notice" call.
* elflink.c (_bfd_elf_merge_symbol): Don't skip weak redefs when
it is a redef of an IR symbol in a real BFD.
ld/
* ldmain.c (notice): Delete "name" param, add "h".
* plugin.c (plugin_notice): Likewise. Set non_ir_ref. Handle
redefinitions of IR symbols in real BFDs.
(plugin_multiple_definition, plugin_multiple_common): Delete.
(non_ironly_hash, init_non_ironly_hash): Delete.
(is_visible_from_outside): Traverse entry_symbol chain.
(get_symbols): Use non_ir_ref flag rather than hash lookup.
For now, only the sub-command name is completed. No support yet for
completing options to that command. But even this is a huge step as
currently, nothing is completed, and the basic "help sim" is fairly
obtuse as to what exactly the "sim" command accepts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* tic6x.h (R_C6000_JUMP_SPLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16, R_C6000_PCR_L16): New relocs.
(SHN_TIC6X_SCOMMON): Define.
bfd/
* elf32-tic6x.h (struct elf32_tic6x_params): New.
(elf32_tic6x_setup): Declare.
* elf32-tic6x.c: Include <limits.h>.
(ELF_DYNAMIC_LINKER, DEFAULT_STACK_SIZE, PLT_ENTRY_SIZE): Define.
(struct elf32_tic6x_link_hash_table, struct elf32_link_hash_entry):
New structures.
(elf32_tic6x_link_hash_table, is_tic6x_elf): New macros.
(tic6x_elf_scom_section, tic6x_elf_scom_symbol,
tic6x_elf_scom_symbol_ptr): New static variables.
(elf32_tic6x_howto_table, elf32_tic6x_howto_table_rel,
elf32_tic6x_reloc_map): Add R_C6000_JUMP_SLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_link_hash_newfunc, elf32_tic6x_link_hash_table_create,
elf32_tic6x_link_hash_table_free, elf32_tic6x_setup,
elf32_tic6x_using_dsbt, elf32_tic6x_install_rela,
elf32_tic6x_create_dynamic_sections, elf32_tic6x_make_got_dynreloc,
elf32_tic6x_finish_dynamic_symbol, elf32_tic6x_gc_sweep_hook,
elf32_tic6x_adjust_dynamic_symbol): New static functions.
(elf32_tic6x_relocate_section): For R_C6000_PCR_S21, convert branches
to weak symbols as required by the ABI.
Handle GOT and DSBT_INDEX relocs, and copy relocs to the output file
as needed when generating DSBT output.
(elf32_tic6x_check_relocs, elf32_tic6x_add_symbol_hook,
elf32_tic6x_symbol_processing, elf32_tic6x_section_from_bfd_section,
elf32_tic6x_allocate_dynrelocs, elf32_tic6x_size_dynamic_sections,
elf32_tic6x_always_size_sections, elf32_tic6x_modify_program_headers,
elf32_tic6x_finish_dynamic_sections, elf32_tic6x_plt_sym_val,
elf32_tic6x_copy_private_data, elf32_tic6x_link_omit_section_dynsym):
New static functions.
(ELF_MAXPAGESIZE): Define to 0x1000.
(bfd_elf32_bfd_copy_private_bfd_data,
bfd_elf32_bfd_link_hash_table_create,
bfd_elf32_bfd_link_hash_table_free, elf_backend_can_refcount,
elf_backend_want_got_plt, elf_backend_want_dynbss,
elf_backend_plt_readonly, elf_backend_got_header_size,
elf_backend_gc_sweep_hook, elf_backend_modify_program_headers,
elf_backend_create_dynamic_sections, elf_backend_adjust_dynamic_symbol,
elf_backend_check_relocs, elf_backend_add_symbol_hook,
elf_backend_symbol_processing, elf_backend_link_output_symbol_hook,
elf_backend_section_from_bfd_section,
elf_backend_finish_dynamic_symbol, elf_backend_always_size_sections,
elf32_tic6x_size_dynamic_sections, elf_backend_finish_dynamic_sections,
elf_backend_omit_section_dynsym, elf_backend_plt_sym_val): Define.
* bfd/reloc.c (BFD_RELOC_C6000_JUMP_SLOT, BFD_RELOC_C6000_EHTYPE,
BFD_RELOC_C6000_PCR_H16, BFD_RELOC_C6000_PCR_S16): Add.
* bfd/bfd-in2.h: Regenerate.
* bfd/libbfd.h: Regenerate.
* config.bfd: Accept tic6x-*-* instead of tic6x-*-elf.
gas/
* config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
static variables.
(md_begin): Initialize them.
(s_tic6x_scomm): New static function.
(md_pseudo_table): Add "scomm".
(tc_gen_reloc): Really undo all adjustments made by
bfd_install_relocation.
* doc/c-tic6x.texi: Document the .scomm directive.
gas/testsuite/
* gas/tic6x/scomm-directive-1.s: New test.
* gas/tic6x/scomm-directive-1.d: New test.
* gas/tic6x/scomm-directive-2.s: New test.
* gas/tic6x/scomm-directive-2.d: New test.
* gas/tic6x/scomm-directive-3.s: New test.
* gas/tic6x/scomm-directive-3.d: New test.
* gas/tic6x/scomm-directive-4.s: New test.
* gas/tic6x/scomm-directive-4.d: New test.
* gas/tic6x/scomm-directive-5.s: New test.
* gas/tic6x/scomm-directive-5.d: New test.
* gas/tic6x/scomm-directive-6.s: New test.
* gas/tic6x/scomm-directive-6.d: New test.
* gas/tic6x/scomm-directive-7.s: New test.
* gas/tic6x/scomm-directive-7.d: New test.
* gas/tic6x/scomm-directive-8.s: New test.
* gas/tic6x/scomm-directive-8.d: New test.
ld/
* emulparams/elf32_tic6x_le.sh (BIG_OUTPUT_FORMAT, EXTRA_EM_FILE,
GENERATE_SHLIB_SCRIPT): New defines.
(TEXT_START_ADDR): Define differently depending on target.
(.got): Redefine to include "*(.dsbt)".
(SDATA_START_SYMBOLS): Remove, replace with
(OTHER_GOT_SYMBOLS): New.
(OTHER_BSS_SECTIONS): Define only for ELF targets.
* emultempl/tic6xdsbt.em: New file.
* gen-doc.texi: Set C6X.
* ld.texinfo: Likewise.
(Options specific to C6X uClinux targets): New section.
binutils/
* readelf.c (get_symbol_index_type): Handle SCOM for TIC6X.
(dump_relocations): Likewise.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Accept tic6x*-*-uclinux*.
ld/testsuite/
* ld-scripts/crossref.exp: Add CFLAGS for tic6x*-*-*.
* ld-elf/sec-to-seg.exp: Remove tic6x from list of targets defining
pagesize to 1.
* ld-tic6x/tic6x.exp: Add support for DSBT shared library/executable
linking tests.
* ld-tic6x/dsbt.ld: New linker script.
* ld-tic6x/dsbt-be.ld: New linker script.
* ld-tic6x/dsbt-overflow.ld: New linker script.
* ld-tic6x/dsbt-inrange.ld: New linker script.
* ld-tic6x/shlib-1.s: New test.
* ld-tic6x/shlib-2.s: New test.
* ld-tic6x/shlib-app-1r.s: New test.
* ld-tic6x/shlib-app-1.s: New test.
* ld-tic6x/shlib-1.sd: New test.
* ld-tic6x/shlib-1.dd: New test.
* ld-tic6x/shlib-app-1.rd: New test.
* ld-tic6x/shlib-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1.sd: New test.
* ld-tic6x/static-app-1rb.od: New test.
* ld-tic6x/shlib-app-1.dd: New test.
* ld-tic6x/shlib-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.od: New test.
* ld-tic6x/static-app-1r.od: New test.
* ld-tic6x/shlib-1rb.rd: New test.
* ld-tic6x/shlib-app-1rb.dd: New test.
* ld-tic6x/shlib-1rb.sd: New test.
* ld-tic6x/shlib-1rb.dd: New test.
* ld-tic6x/shlib-app-1b.od: New test.
* ld-tic6x/tic6x.exp: New test.
* ld-tic6x/static-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1r.od: New test.
* ld-tic6x/static-app-1.od: New test.
* ld-tic6x/static-app-1b.rd: New test.
* ld-tic6x/static-app-1r.rd: New test.
* ld-tic6x/static-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.sd: New test.
* ld-tic6x/static-app-1rb.dd: New test.
* ld-tic6x/static-app-1r.sd: New test.
* ld-tic6x/static-app-1b.dd: New test.
* ld-tic6x/shlib-1b.rd: New test.
* ld-tic6x/static-app-1r.dd: New test.
* ld-tic6x/shlib-app-1b.rd: New test.
* ld-tic6x/shlib-1r.rd: New test.
* ld-tic6x/shlib-app-1r.rd: New test.
* ld-tic6x/shlib-1b.sd: New test.
* ld-tic6x/static-app-1.rd: New test.
* ld-tic6x/shlib-app-1b.sd: New test.
* ld-tic6x/shlib-1r.sd: New test.
* ld-tic6x/shlib-1b.dd: New test.
* ld-tic6x/shlib-app-1r.sd: New test.
* ld-tic6x/shlib-app-1b.dd: New test.
* ld-tic6x/shlib-1r.dd: New test.
* ld-tic6x/static-app-1.sd: New test.
* ld-tic6x/shlib-app-1r.dd: New test.
* ld-tic6x/static-app-1.dd: New test.
* ld-tic6x/shlib-noindex.rd: New test.
* ld-tic6x/shlib-noindex.dd: New test.
* ld-tic6x/shlib-noindex.sd: New test.
* ld-tic6x/got-reloc-local-1.s: New test.
* ld-tic6x/got-reloc-local-2.s: New test.
* ld-tic6x/got-reloc-local-r.d: New test.
* ld-tic6x/got-reloc-global.s: New test.
* ld-tic6x/got-reloc-global-addend-1.d: New test.
* ld-tic6x/got-reloc-global-addend-1.s: New test.
* ld-tic6x/got-reloc-global-addend-2.d: New test.
* ld-tic6x/got-reloc-inrange.d: New test.
* ld-tic6x/got-reloc-overflow.d: New test.
* ld-tic6x/got-reloc-global-addend-2.s: New test.
* ld-tic6x/dsbt-index-error.d: New test.
* ld-tic6x/dsbt-index.d: New test.
* ld-tic6x/dsbt-index.s: New test.
* ld-tic6x/shlib-app-1.od: New test.
* ld-tic6x/shlib-app-1rb.od: New test.
* ld-tic6x/shlib-1.rd: New test.
* ld-tic6x/weak.d: New test.
* ld-tic6x/weak-be.d: New test.
* ld-tic6x/weak.s: New test.
* ld-tic6x/weak-data.d: New test.
* ld-tic6x/common.d: New test.
* ld-tic6x/common.ld: New test.
* ld-tic6x/common.s: New test.
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* archures.c: Add AVR XMEGA architecture information.
* cpu-avr.c (arch_info_struct): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
(elf32_avr_object_p): Likewise.
/gas:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
(AVR_INSN): Change definition to match.
(avr_opcodes): Likewise, change to match.
(mcu_types): Add XMEGA architecture names and new XMEGA device names.
(md_show_usage): Add XMEGA architecture names.
(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
Add support for SPM Z+ instruction.
* doc/c-avr.texi: Add documentation for XMEGA architectures and
devices.
/include/opcode:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
New instruction set flags.
(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.
/ld:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
(eavrxmega?.c): Likewise.
* configure.tgt (targ_extra_emuls): Likewise.
* emulparams/avrxmega1.sh: New file.
* emulparams/avrxmega2.sh: Likewise.
* emulparams/avrxmega3.sh: Likewise.
* emulparams/avrxmega4.sh: Likewise.
* emulparams/avrxmega5.sh: Likewise.
* emulparams/avrxmega6.sh: Likewise.
* emulparams/avrxmega7.sh: Likewise.
* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
Add avrxmega6, avrxmega7 to list of architectures for no stubs.
/opcodes:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
* arm.h (R_ARM_IRELATIVE): New relocation.
bfd/
* reloc.c (BFD_RELOC_ARM_IRELATIVE): New relocation.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_howto_table_2): Rename existing definition
to elf32_arm_howto_table_3 and replace with a single R_ARM_IRELATIVE
entry.
(elf32_arm_howto_from_type): Update accordingly.
(elf32_arm_reloc_map): Map BFD_RELOC_ARM_IRELATIVE to R_ARM_IRELATIVE.
(elf32_arm_reloc_name_lookup): Handle elf32_arm_howto_table_3.
(arm_plt_info): New structure, split out from elf32_arm_link_hash_entry
with an extra noncall_refcount field.
(arm_local_iplt_info): New structure.
(elf_arm_obj_tdata): Add local_iplt.
(elf32_arm_local_iplt): New accessor macro.
(elf32_arm_link_hash_entry): Replace plt_thumb_refcount,
plt_maybe_thumb_refcount and plt_got_offset with an arm_plt_info.
Change tls_type to a bitfield and add is_iplt.
(elf32_arm_link_hash_newfunc): Update accordingly.
(elf32_arm_allocate_local_sym_info): New function.
(elf32_arm_create_local_iplt): Likewise.
(elf32_arm_get_plt_info): Likewise.
(elf32_arm_plt_needs_thumb_stub_p): Likewise.
(elf32_arm_get_local_dynreloc_list): Likewise.
(create_ifunc_sections): Likewise.
(elf32_arm_copy_indirect_symbol): Update after the changes to
elf32_arm_link_hash_entry. Assert the is_iplt has not yet been set.
(arm_type_of_stub): Add an st_type argument. Use elf32_arm_get_plt_info
to get PLT information. Assert that all STT_GNU_IFUNC references
are turned into PLT references.
(arm_build_one_stub): Pass the symbol type to
elf32_arm_final_link_relocate.
(elf32_arm_size_stubs): Pass the symbol type to arm_type_of_stub.
(elf32_arm_allocate_irelocs): New function.
(elf32_arm_add_dynreloc): In static objects, use .rel.iplt for
all R_ARM_IRELATIVE.
(elf32_arm_allocate_plt_entry): New function.
(elf32_arm_populate_plt_entry): Likewise.
(elf32_arm_final_link_relocate): Add an st_type parameter.
Set srelgot to null for static objects. Use separate variables
to record which st_value and st_type should be used when generating
a dynamic relocation. Use elf32_arm_get_plt_info to find the
symbol's PLT information, setting has_iplt_entry, splt,
plt_offset and gotplt_offset accordingly. Check whether
STT_GNU_IFUNC symbols should resolve to an .iplt entry, and change
the relocation target accordingly. Broaden assert to include
.iplts. Don't set sreloc for static relocations. Assert that
we only generate dynamic R_ARM_RELATIVE relocations for R_ARM_ABS32
and R_ARM_ABS32_NOI. Generate R_ARM_IRELATIVE relocations instead
of R_ARM_RELATIVE relocations if the target is an STT_GNU_IFUNC
symbol. Pass the symbol type to arm_type_of_stub. Conditionally
resolve GOT references to the .igot.plt entry.
(elf32_arm_relocate_section): Update the call to
elf32_arm_final_link_relocate.
(elf32_arm_gc_sweep_hook): Use elf32_arm_get_plt_info to get PLT
information. Treat R_ARM_REL32 and R_ARM_REL32_NOI as call
relocations in shared libraries and relocatable executables.
Count non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_check_relocs): Always create ifunc sections. Set isym
at the same time as setting h. Use elf32_arm_allocate_local_sym_info
to allocate local symbol information. Treat R_ARM_REL32 and
R_ARM_REL32_NOI as call relocations in shared libraries and
relocatable executables. Record PLT information for local
STT_GNU_IFUNC functions as well as global functions. Count
non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_adjust_dynamic_symbol): Handle STT_GNU_IFUNC symbols.
Don't remove STT_GNU_IFUNC PLTs unless all references have been
removed. Update after the changes to elf32_arm_link_hash_entry.
(allocate_dynrelocs_for_symbol): Decide whether STT_GNU_IFUNC PLT
entries should live in .plt or .iplt. Check whether the .igot.plt
and .got entries can be combined. Use elf32_arm_allocate_plt_entry
to allocate .plt and .(i)got.plt entries. Detect which .got
entries will need R_ARM_IRELATIVE relocations and use
elf32_arm_allocate_irelocs to allocate them. Likewise other
non-.got dynamic relocations.
(elf32_arm_size_dynamic_sections): Allocate .iplt, .igot.plt
and dynamic relocations for local STT_GNU_IFUNC symbols.
Check whether the .igot.plt and .got entries can be combined.
Detect which .got entries will need R_ARM_IRELATIVE relocations
and use elf32_arm_allocate_irelocs to allocate them. Use stashed
section pointers intead of strcmp checks. Handle iplt and igotplt.
(elf32_arm_finish_dynamic_symbol): Use elf32_arm_populate_plt_entry
to fill in .plt, .got.plt and .rel(a).plt entries. Point
STT_GNU_IFUNC symbols at an .iplt entry if non-call relocations
resolve to it.
(elf32_arm_output_plt_map_1): New function, split out from
elf32_arm_output_plt_map. Handle .iplt entries. Use
elf32_arm_plt_needs_thumb_stub_p.
(elf32_arm_output_plt_map): Call it.
(elf32_arm_output_arch_local_syms): Add mapping symbols for
local .iplt entries.
(elf32_arm_swap_symbol_in): Handle Thumb STT_GNU_IFUNC symbols.
(elf32_arm_swap_symbol_out): Likewise.
(elf32_arm_add_symbol_hook): New function.
(elf_backend_add_symbol_hook): Define for all targets.
opcodes/
* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
gas/
* config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
determine whether a relocation is needed.
(md_apply_fix, arm_apply_sym_value): Likewise.
ld/testsuite/
* ld-arm/ifunc-1.s, ld-arm/ifunc-1.dd, ld-arm/ifunc-1.gd,
ld-arm/ifunc-1.rd, ld-arm/ifunc-2.s, ld-arm/ifunc-2.dd,
ld-arm/ifunc-2.gd, ld-arm/ifunc-2.rd, ld-arm/ifunc-3.s,
ld-arm/ifunc-3.dd, ld-arm/ifunc-3.gd, ld-arm/ifunc-3.rd,
ld-arm/ifunc-4.s, ld-arm/ifunc-4.dd, ld-arm/ifunc-4.gd,
ld-arm/ifunc-4.rd, ld-arm/ifunc-5.s, ld-arm/ifunc-5.dd,
ld-arm/ifunc-5.gd, ld-arm/ifunc-5.rd, ld-arm/ifunc-6.s,
ld-arm/ifunc-6.dd, ld-arm/ifunc-6.gd, ld-arm/ifunc-6.rd,
ld-arm/ifunc-7.s, ld-arm/ifunc-7.dd, ld-arm/ifunc-7.gd,
ld-arm/ifunc-7.rd, ld-arm/ifunc-8.s, ld-arm/ifunc-8.dd,
ld-arm/ifunc-8.gd, ld-arm/ifunc-8.rd, ld-arm/ifunc-9.s,
ld-arm/ifunc-9.dd, ld-arm/ifunc-9.gd, ld-arm/ifunc-9.rd,
ld-arm/ifunc-10.s, ld-arm/ifunc-10.dd, ld-arm/ifunc-10.gd,
ld-arm/ifunc-10.rd, ld-arm/ifunc-11.s, ld-arm/ifunc-11.dd,
ld-arm/ifunc-11.gd, ld-arm/ifunc-11.rd, ld-arm/ifunc-12.s,
ld-arm/ifunc-12.dd, ld-arm/ifunc-12.gd, ld-arm/ifunc-12.rd,
ld-arm/ifunc-13.s, ld-arm/ifunc-13.dd, ld-arm/ifunc-13.gd,
ld-arm/ifunc-13.rd, ld-arm/ifunc-14.s, ld-arm/ifunc-14.dd,
ld-arm/ifunc-14.gd, ld-arm/ifunc-14.rd, ld-arm/ifunc-15.s,
ld-arm/ifunc-15.dd, ld-arm/ifunc-15.gd, ld-arm/ifunc-15.rd,
ld-arm/ifunc-16.s, ld-arm/ifunc-16.dd, ld-arm/ifunc-16.gd,
ld-arm/ifunc-16.rd, ld-arm/ifunc-dynamic.ld,
ld-arm/ifunc-static.ld: New tests.
* ld-arm/farcall-group.d, ld-arm/farcall-group-size2.d,
ld-arm/farcall-mixed-lib-v4t.d, ld-arm/farcall-mixed-lib.d: Update
for new stub hashes.
* ld-arm/arm-elf.exp: Run them.
* internal.h (elf_internal_sym): Add st_target_internal.
* arm.h (arm_st_branch_type): New enum.
(ARM_SYM_BRANCH_TYPE): New macro.
bfd/
* elf-bfd.h (elf_link_hash_entry): Add target_internal.
* elf.c (swap_out_syms): Set st_target_internal for each
Elf_Internal_Sym.
* elfcode.h (elf_swap_symbol_in): Likewise.
* elf32-i370.c (i370_elf_finish_dynamic_sections): Likewise.
* elf32-sh-symbian.c (sh_symbian_relocate_section): Likewise.
* elf64-sparc.c (elf64_sparc_output_arch_syms): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Likewise.
* elflink.c (elf_link_output_extsym): Likewise.
(bfd_elf_final_link): Likewise.
(elf_link_add_object_symbols): Copy st_target_internal
to the hash table if we see a definition.
(_bfd_elf_copy_link_hash_symbol_type): Copy target_internal.
* elf32-arm.c (elf32_arm_stub_hash_entry): Replace st_type with
a branch_type field.
(a8_erratum_fix, a8_erratum_reloc): Likewise.
(arm_type_of_stub): Replace actual_st_type with an
actual_branch_type parameter.
(arm_build_one_stub): Use branch types rather than st_types to
determine the type of branch.
(cortex_a8_erratum_scan): Likewise.
(elf32_arm_size_stubs): Likewise.
(bfd_elf32_arm_process_before_allocation): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_sections): Likewise.
(elf32_arm_final_link_relocate): Replace sym_flags parameter with
a branch_type parameter.
(elf32_arm_relocate_section): Update call accordingly.
(elf32_arm_adjust_dynamic_symbol): Don't check STT_ARM_TFUNC.
(elf32_arm_output_map_sym): Initialize st_target_internal.
(elf32_arm_output_stub_sym): Likewise.
(elf32_arm_symbol_processing): Delete.
(elf32_arm_swap_symbol_in): Convert STT_ARM_TFUNCs into STT_FUNCs.
Use st_target_internal to record the branch type.
(elf32_arm_swap_symbol_out): Use st_target_internal to test for
Thumb functions.
(elf32_arm_is_function_type): Delete.
(elf_backend_symbol_processing): Likewise.
(elf_backend_is_function_type): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Set the branch type
for Thumb symbols.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Check
eh->target_internal.
opcodes/
* arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
Use branch types instead.
(print_insn): Likewise.
This can boot Das U-Boot and a Linux kernel. It also supports Linux
userspace FLAT and FDPIC (dynamic and static) ELFs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The mmod field is decoded in a few places (gas/opcodes/sim), so move it to
a common place to avoid duplication.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
* config/tc-hppa.c (pa_ip): Revert last change. Add variable need_cond
to determine whether a 64-bit condition is needed for 'A' and 'S'
conditions. Default to 32-bit never condition for logical and unit
instructions. Add error message for missing branch on bit condition.
* hppa.h (pa_opcodes): Revert last change. Exchange 32 and 64-bit
"bb" entries.
* hppa-dis.c (compare_cond_64_names): Change never condition to ",*".
(add_cond_64_names): Likewise.
(logical_cond_64_names): Likewise.
(unit_cond_64_names): Likewise.
* config/tc-hppa.c (pa_ip): Set doubleword carry/borrow bit when a
doubleword completer or doubleword condition is found in an add/sub
instruction. Reject match for 'A'/'S' only if there is no condition
and d bit is not set.
* gas/hppa/basic/add2.s: Add test for a simple doubleword carry
instruction.
* gas/hppa/basic/sub2.s: Add tests for simple word and doubleword
borrow instructions.
* gas/hppa/basic/basic.exp: Update regexps for above.
* opcode/hppa.h: Clear "d" bit in "add" and "sub" patterns.
* config/tc-s390.c (current_cpu): Initialize with latest CPU.
(init_default_arch): Default to z/Architecture mode if CPU provides it.
Remove the check setting the CPU default.
2010-11-25 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_MAXCPU.
Add new linker options for marking programs to load into L1 memory
at runtime. This needs new EF flag bits, so declare them.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* gas/config/tc-arm.c (arm_arch_v6m_only): New variable.
(aeabi_set_public_attributes): Ensure we only set the Operating System
Extension when we are on an M-profile core.
* gas/testsuite/gas/arm/pr12198-1.d: New test.
* gas/testsuite/gas/arm/pr12918-1.s: Likewise.
* gas/testsuite/gas/arm/pr12198-2.d: Likewise.
* gas/testsuite/gas/arm/pr12918-2.s: Likewise.
* include/opcode/arm.h (ARM_AEXT_V6M_ONLY): New define.
(ARM_AEXT_V6M): Rewrite in terms of ARM_AEXT_V6M_ONLY.
(ARM_ARCH_V6M_ONLY): New define.
[PATCH] Add infrastructure for plugin API; functionality to follow.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* plugin-api.h (LDPT_GNU_LD_VERSION): New ld_plugin_tag enum member.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* configure.in: Add AC_CHECKs for file io and dlfcn headers and
functions and AC_SEARCH for -ldl.
(enable_plugins): New shell variable set if above tests find dlopen
functionality.
(ENABLE_PLUGINS): Add related automake conditional.
* configure: Regenerate.
* config.in: Likewise.
* Makefile.am (PLUGIN_C): Declare plugin C source file, conditional
on ENABLE_PLUGINS being defined.
(PLUGIN_H): Likewise for header file.
(PLUGIN_OBJECT): Likewise for object file.
(PLUGIN_CFLAGS): Likewise -D flag required to compile plugin support.
(AM_CPPFLAGS): Use PLUGIN_CFLAGS.
(CFILES): Use PLUGIN_C.
(HFILES): Use PLUGIN_H.
(OFILES): Use PLUGIN_OBJECT.
(ld_new_SOURCES): Use PLUGIN_C.
(noinst_LTLIBRARIES)[ENABLE_PLUGINS]: Declare test plugin.
(libldtestplug_la_SOURCES)[ENABLE_PLUGINS]: Add automake definition
for test plugin.
(libldtestplug_la_CFLAGS)[ENABLE_PLUGINS]: Likewise.
(libldtestplug_la_LDFLAGS)[ENABLE_PLUGINS]: Likewise.
* Makefile.in: Regenerate.
* sysdep.h: Include stdarg.h, unistd.h and one of fcntl.h or
sys/file.h where available. Include dlfcn.h when ENABLE_PLUGINS.
(O_RDONLY): Supply default definition likewise to bfd's sysdep.h
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(O_ACCMODE): Likewise.
(O_BINARY): Likewise.
(SEEK_SET): Likewise.
(SEEK_CUR): Likewise.
(SEEK_END): Likewise.
* ldmisc.c (vfinfo): Make non-static. Add %p format char.
* ldmisc.h (vfinfo): Declare extern prototype.
* lexsup.c (enum option_values)[ENABLE_PLUGINS]: Add new entries for
OPTION_PLUGIN and OPTION_PLUGIN_OPT.
(ld_options[])[ENABLE_PLUGINS]: Add option data for the above two.
(parse_args)[ENABLE_PLUGINS]: Handle them, and load all plugins once
option parsing is complete.
* ldmain.c (main)[ENABLE_PLUGINS]: Call plugin cleanup hooks just
after lang_finish.
* plugin.c: New source file.
* plugin.h: Likewise new header.
* testplug.c: New source file.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 1/6).
* ld-bootstrap/bootstrap.exp: Skip static tests also if LD plugins
are enabled.
* lib/ld-lib.exp (proc regexp_diff): Extend verbose debug output.
(proc set_file_contents): Write a file with the supplied content.
(run_ld_link_tests): Add new 'ld' action to test linker output.
(proc check_plugin_api_available): Return true if linker under test
supports the plugin API.
* ld-plugin/func.c: New test source file.
* ld-plugin/main.c: Likewise.
* ld-plugin/text.c: Likewise.
* ld-plugin/plugin-1.d: New dump test output pattern script.
* ld-plugin/plugin-2.d: Likewise.
* ld-plugin/plugin-3.d: Likewise.
* ld-plugin/plugin-4.d: Likewise.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin.exp: New test control script.
---
[PATCH] Implement claim file and all symbols read hooks and add symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ldfile.c (ldfile_try_open_bfd)[ENABLE_PLUGINS]: Don't return early
during compat checks if they pass, instead offer any successfully
opened and accepted file to the plugin claim file hooks chain. Create
a dummy bfd to accept symbols added by the plugin, if the plugin
claims the file.
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Call plugin all symbols
read hook chain before ldemul_after_open.
* ldlang.h (struct lang_input_statement_struct): Add new single-bit
'claimed' flag.
* plugin.c (IRONLY_SUFFIX): New macro for dummy bfd file suffix.
(IRONLY_SUFFIX_LEN): Length of the above string.
(plugin_get_ir_dummy_bfd): New function to create the dummy bfd used
to store symbols for ir-only files.
(is_ir_dummy_bfd): New function to check if a bfd is ir-only.
(asymbol_from_plugin_symbol): New function converts symbol formats.
(add_symbols): Call it to convert plugin syms to bfd syms and add
them to the dummy bfd.
* plugin.h: Add missing include guards.
(plugin_get_ir_dummy_bfd): Add prototype.
(is_ir_dummy_bfd): Likewise.
* testplug.c (TV_MESSAGE): New helper macro.
(struct claim_file): New struct.
(claim_file_t): New typedef.
(tag_names[]): Make static and const.
(claimfiles_list): New variable.
(claimfiles_tail_chain_ptr): Likewise.
(last_claimfile): Likewise.
(record_claim_file): Record a file to claim on a singly-linked list.
(parse_symdefstr): Parse an ASCII representation of a symbol from a
plugin option into the fields of a struct ld_plugin_symbol.
(record_claimed_file_symbol): Use it to parse plugin option for
adding a symbol.
(parse_option): Parse claim file and add symbol options.
(dump_tv_tag): Use TV_MESSAGE.
(onload): Likewise.
(onclaim_file): Make static. Use TV_MESSAGE. Scan list of files to
claim and claim this file if required, adding any symbols specified.
(onall_symbols_read): Make static and use TV_MESSAGE.
(oncleanup): Likewise.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 2/6).
* ld-plugin/plugin-3.d: Enable regexes for new functionality.
* ld-plugin/plugin-5.d: Likewise.
* ld-plugin/plugin-6.d: New testcase.
* ld-plugin/plugin-7.d: Likewise.
* ld-plugin/plugin.exp: Use 'nm' on compiled test objects to determine
whether symbols in plugin arguments need an underscore prefix. Add
new plugin-6.d and plugin-7.d testcases.
---
[PATCH] Implement get symbols callback.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ldmain.c (notice)[ENABLE_PLUGINS]: Call plugin_notice.
* plugin.c (non_ironly_hash): Add new bfd hash table.
(plugin_load_plugins): Exit early if no plugins to load. If plugins
do load successfully, set notice_all flag in link info.
(get_symbols): Implement.
(plugin_load_plugins): Exit early if no plugins to load, else after
loading plugins successfully enable notice_all mode.
(init_non_ironly_hash): Lazily init non_ironly_hash table.
(plugin_notice): Record symbols referenced from non-IR files in the
non_ironly_hash. Suppress tracing, cref generation and nocrossrefs
tracking for symbols from dummy IR bfds.
* plugin.h: Fix formatting.
(plugin_notice): Add prototype.
* testplug.c (dumpresolutions): New global var.
(parse_options): Accept "dumpresolutions".
(onall_symbols_read): Get syms and dump resolutions if it was given.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 3/6).
* ld-plugin/plugin-8.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Implement add input file, add input lib and set extra lib path callbacks.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ldlang.c (lang_process)[ENABLE_PLUGINS]: Move invocation of
plugin_call_all_symbols_read to before setting of gc_sym_list, and
open any new input files that may have been added during it.
* ldmain.c (multiple_definition)[ENABLE_PLUGINS]: Call out to
plugin_multiple_definition and let it have first say over what to do
with the clashing definitions.
* plugin.c (no_more_claiming): New boolean variable.
(plugin_cached_allow_multiple_defs): Likewise.
(add_input_file): Implement.
(add_input_library): Likewise.
(set_extra_library_path): Likewise.
(plugin_call_claim_file): Don't do anything when no_more_claiming set.
(plugin_call_all_symbols_read): Set it. Disable link info
"allow_multiple_definition" flag, but cache its value.
(plugin_multiple_definition): New function.
* plugin.h (plugin_multiple_definition): Add prototype.
* testplug.c (addfile_enum_t): New enumerated typedef.
(add_file_t): New struct typedef.
(addfiles_list): New variable.
(addfiles_tail_chain_ptr): Likewise.
(record_add_file): New function.
(parse_option): Parse "add:", "lib:" and "dir:" options and call it.
(onall_symbols_read): Iterate the list of new files, libs and dirs,
adding them.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 4/6).
* ld-plugin/plugin-9.d: New testcase.
* ld-plugin/plugin.exp: Invoke it.
---
[PATCH] Add ELF symbol visibility support to plugin interface.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* plugin.c (asymbol_from_plugin_symbol): If the bfd is an ELF bfd,
find the elf symbol data and set the visibility in the st_other field.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 5/6).
* ld-plugin/plugin-ignore.d: New dump test control script.
* ld-plugin/plugin-vis-1.d: Likewise.
* ld-plugin/plugin.exp: Add list of ELF-only tests and run them if
testing on an ELF target.
---
[PATCH] Add archive support to plugin interface.
bfd/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* aoutx.h (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* cofflink.c (coff_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(coff_link_check_archive_element): Handle substitute bfd if it
was set during add_archive_element callback in the above.
* ecoff.c (read_ext_syms_and_strs): New function holds symbol-reading
code factored-out from ecoff_link_check_archive_element.
(reread_ext_syms_and_strs): Clear old symbols and call it.
(ecoff_link_check_archive_element): Use the above. Handle substitute
BFD if one is set by add_archive_element callback.
(ecoff_link_add_archive_symbols): Likewise allow bfd substitution.
* elflink.c (elf_link_add_archive_symbols): Likewise.
* linker.c (generic_link_check_archive_element): Likewise.
* pdp11.c (aout_link_check_ar_symbols): Take new "subsbfd" reference
parameter and pass it when invoking add_archive_element callback.
(aout_link_check_archive_element): Handle substitute bfd if it was
set during add_archive_element callback in the above.
* vms-alpha.c (alpha_vms_link_add_archive_symbols): Handle substitute
BFD if one is set by add_archive_element callback.
* xcofflink.c (xcoff_link_check_dynamic_ar_symbols): Take new "subsbfd"
reference parameter and pass it when invoking add_archive_element
callback.
(xcoff_link_check_ar_symbols): Likewise.
(xcoff_link_check_archive_element): Handle bfd substitution if it was
set by callback in the above.
include/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* bfdlink.h (struct_bfd_link_callbacks): Document new argument
to add_archive_element callback used to return a replacement bfd which
is to be added to the hash table in place of the original element.
ld/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ldlang.c (load_symbols): Handle bfd subsitution when calling the
add_archive_element callback.
* ldmain.c (add_archive_element)[ENABLE_PLUGINS]: Offer the archive
member to the plugins and if claimed set "subsbfd" output parameter to
point to the dummy IR-only BFD.
ld/testsuite/ChangeLog:
2010-10-14 Dave Korn <dave.korn.cygwin@gmail.com>
Apply LD plugin patch series (part 6/6).
* ld-plugin/plugin-10.d: New dump test control script.
* ld-plugin/plugin-11.d: Likewise.
* ld-plugin/plugin.exp: Run them.
---
* gas/config/tc-arm.c (arm_ext_virt): New variable.
(arm_reg_type): Add REG_TYPE_RNB for banked registers.
(reg_entry): Allow registers to be larger than a byte.
(reg_alias): Fix type warning.
(parse_operands): Parse banked registers when appropriate.
(do_mrs): Add support for Virtualization Extensions.
(do_hvc): New function.
(do_t_mrs): Add support for Virtualization Extensions.
(do_t_msr): Likewise.
(do_t_hvc): New function.
(SPLRBANK): New define.
(reg_names): Add banked registers.
(insns): Add support for Virtualization Extensions.
(md_apply_fixup): Likewise.
(arm_cpus): -mcpu=cortex-a15 implies the Virtualization Extensions.
(arm_extensions): Add 'virt' extension.
(aeabi_set_public_attributes): Add support for Virtualization
Extensions.
* gas/doc/c-arm.texi: Document 'virt' extension.
* gas/testsuite/gas/arm/armv7-a+virt.d: New test.
* gas/testsuite/gas/arm/armv7-a+virt.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Virtualization Extensions.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec+virt.d: New test.
* gas/testsuite/gas/arm/attr-march-armv7-a+virt.d: Likewise.
* include/opcode/arm.h (ARM_EXT_VIRT): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Rename...
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): ...to this and include Virtualization
Extensions.
* opcodes/arm-dis.c (arm_opcodes): Add Virtualiztion Extensions support.
(thumb32_opcodes): Likewise.
(banked_regname): New function.
(print_insn_arm): Add Virtualization Extensions support.
(print_insn_thumb32): Likewise.
(do_div): New function.
(insns): Accept UDIV and SDIV in ARM state.
(arm_cpus): The cortex-a15 option has all current v7-A extensions.
(arm_extensions): Add 'idiv' extension.
(aeabi_set_public_attributes): Update Tag_DIV_use values for the
Integer Divide extension.
* gas/doc/c-arm.texi: Document the idiv extension.
* gas/testsuite/gas/arm/armv7-a+idiv.d: New test.
* gas/testsuite/gas/arm/armv7-a+idiv.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Integer divide extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+idiv.d: New test.
* include/opcode/arm.h (ARM_AEXT_ADIV): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Support disassembly of UDIV and SDIV in
ARM state.
(arm_ext_m): Add support for OS extension.
(arm_ext_os): New variable.
(do_t_swi): In v6-M ensure we have the OS extension.
(arm_cpus): The cortex-m1 and cortex-m0 options have the OS
extension by default.
(arm_archs): Add armv6s-m.
(arm_extensions): Add 'os' extension.
(cpu_arch_ver): Add support for v6S-M.
* gas/doc/c-arm.texi: Document the OS Extension, and v6-m and v6s-m
architecture options.
* gas/testsuite/gas/arm/archv6s-m-bad.d: New test.
* gas/testsuite/gas/arm/archv6s-m-bad.l: Likewise.
* gas/testsuite/gas/arm/archv6s-m.d: Likewise.
* gas/testsuite/gas/arm/archv6s-m.s: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6s-m.d: Likewise.
* include/opcode/arm.h (ARM_EXT_OS): New define.
(ARM_AEXT_V6SM): Likewise.
(ARM_ARCH_V6SM): Likewise.
The disassembler has partial (but incomplete/broken) support already for
the pseudo debug insn OUTC, so let's fix it up and finish it. And now
that the disassembler can handle it, make sure our assembler can output
it too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* dwarf.c (decode_location_expression): Add offset_size and
dwarf_version arguments. Prefix DIE offset with 0x for
DW_OP_call{2,4,_ref}. Fix up DW_OP_call_ref operand size,
complain if in frame info section. Handle
DW_OP_GNU_implicit_pointer.
(read_and_display_attr_value, display_debug_loc,
display_debug_frames): Adjust decode_location_expression callers.
(process_debug_info): Save offset_size and dwarf_version values
into debug_information array.
* dwarf2.h (DW_OP_GNU_implicit_pointer): New.
* common/signals.c (ANY): Remove.
(SET): No longer use ANY.
include/gdb/
* signals.def: Replace all ANY uses by SET with specific numbers.
* signals.h (ANY): Remove.
* common/signals.c (signals): Move the content to signals.def.
Include it. Remove the INDENT comments.
gdb/gdbserver/
* Makefile.in (signals_def): New.
(server_h): Append include/gdb/signals.h and signals_def.
(server.o): Append signals_def.
include/gdb/
* signals.h (enum target_signal): Move the content to signals.def.
Include it.
* signals.def: New file.
* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.
[opcodes]
* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.
[sim/rx]
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
* internal.h (ELF_TBSS_SPECIAL): New macro, extracted from..
(ELF_SECTION_SIZE): ..here.
(ELF_SECTION_IN_SEGMENT_1): Add "strict" arg.
(ELF_SECTION_IN_SEGMENT_STRICT): New macro.
bfd/
* elf.c (assign_file_positions_for_load_sections): Check that
zero size sections are allocated in segments too.
(assign_file_positions_for_non_load_sections): Warn if zero
size alloc sections are found here.
(copy_elf_program_header): Don't drop zero size sections from
segment map.
(copy_private_bfd_data): Check for changes in zero size sections.
binutils/
* readelf.c (process_program_headers): Don't ignore all zero size
sections.
ld/testsuite/
* ld-powerpc/tlsexe.r: Update.
* ld-powerpc/tlsexetoc.r: Update.
* ld-powerpc/tlsso.r: Update.
* ld-powerpc/tlstocso.r: Update.
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.h (floatformat_ieee_half_big): Add declaration.
(floatformat_ieee_half_little): Likewise.
libiberty/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* floatformat.c (floatformat_ieee_half_big): New variable.
(floatformat_ieee_half_little): Likewise.
gdb/ChangeLog:
2010-07-06 Ken Werner <ken.werner@de.ibm.com>
* gdbtypes.h (floatformats_ieee_half): Add declaration.
* gdbtypes.c (floatformats_ieee_half): New variable.
* doublest.c (floatformat_from_length): Set format to
gdbarch_half_format if length matches.
* gdbarch.sh (half_bit): New architecture method.
(half_format): Likewise.
* gdbarch.h: Regenerate.
* gdbarch.c: Likewise.
* fileread.cc (Input_file::find_fie): New
(Input_file::open): Use Input_file::find_fie.
* fileread.h (Input_file::find_fie): New
* plugin.cc (set_extra_library_path): New.
(Plugin::load): Add set_extra_library_path to the transfer vector.
(Plugin_manager::set_extra_library_path): New.
(Plugin_manager::add_input_file): Use the extra search path if set.
(set_extra_library_path(): New.
* plugin.h (Plugin_manager): Add set_extra_library_path and
extra_search_path_.
2010-06-21 Rafael Espindola <espindola@google.com>
* plugin-api.h (ld_plugin_set_extra_library_path): New.
(ld_plugin_tag): Add LDPT_SET_EXTRA_LIBRARY_PATH.
(ld_plugin_tv): Add tv_set_extra_library_path.
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
* plugin-api.h (ld_plugin_tag): Add LDPT_OUTPUT_NAME.
2010-06-01 Rafael Espindola <espindola@google.com>
* plugin.cc (Plugin::load): Pass the output name to the plugin.
Joseph Myers <joseph@codesourcery.com>
Andrew Stubbs <ams@codesourcery.com>
bfd/
* config.bfd (sh-*-uclinux* | sh[12]-*-uclinux*): Add
bfd_elf32_shl_vec, and FDPIC vectors to targ_selvecs.
* configure.in: Handle FDPIC vectors.
* elf32-sh-relocs.h: Add FDPIC and movi20 relocations.
* elf32-sh.c (DEFAULT_STACK_SIZE): Define.
(SYMBOL_FUNCDESC_LOCAL): Define. Use it instead of
SYMBOL_REFERENCES_LOCAL for function descriptors.
(fdpic_object_p): New.
(sh_reloc_map): Add FDPIC and movi20 relocations.
(sh_elf_info_to_howto, sh_elf_relocate_section): Handle new invalid
range.
(struct elf_sh_plt_info): Add got20 and short_plt. Update all
definitions.
(FDPIC_PLT_ENTRY_SIZE, FDPIC_PLT_LAZY_OFFSET): Define.
(fdpic_sh_plt_entry_be, fdpic_sh_plt_entry_le, fdpic_sh_plts): New.
(FDPIC_SH2A_PLT_ENTRY_SIZE, FDPIC_SH2A_PLT_LAZY_OFFSET): Define.
(fdpic_sh2a_plt_entry_be, fdpic_sh2a_plt_entry_le)
(fdpic_sh2a_short_plt_be, fdpic_sh2a_short_plt_le, fdpic_sh2a_plts):
New.
(get_plt_info): Handle FDPIC.
(MAX_SHORT_PLT): Define.
(get_plt_index, get_plt_offset): Handle short_plt.
(union gotref): New.
(struct elf_sh_link_hash_entry): Add funcdesc, rename tls_type to
got_type and adjust all uses. Add GOT_FUNCDESC.
(struct sh_elf_obj_tdata): Add local_funcdesc. Rename
local_got_tls_type to local_got_type.
(sh_elf_local_got_type): Renamed from sh_elf_local_got_tls_type. All
users changed.
(sh_elf_local_funcdesc): Define.
(struct elf_sh_link_hash_table): Add sfuncdesc, srelfuncdesc, fdpic_p,
and srofixup.
(sh_elf_link_hash_newfunc): Initialize new fields.
(sh_elf_link_hash_table_create): Set fdpic_p.
(sh_elf_omit_section_dynsym): New.
(create_got_section): Create .got.funcdesc, .rela.got.funcdesc
and .rofixup.
(allocate_dynrelocs): Allocate local function descriptors and space
for R_SH_FUNCDESC-related relocations, and for rofixups.
Handle GOT_FUNCDESC. Create fixups. Handle GOT entries which
require function descriptors.
(sh_elf_always_size_sections): Handle PT_GNU_STACK and __stacksize.
(sh_elf_modify_program_headers): New.
(sh_elf_size_dynamic_sections): Allocate function descriptors for
local symbols. Allocate .got.funcdesc contents. Allocate rofixups.
Handle local GOT entries of type GOT_FUNCDESC. Create fixups for
local GOT entries. Ensure that FDPIC libraries always have a PLTGOT
entry in the .dynamic section.
(sh_elf_add_dyn_reloc, sh_elf_got_offset, sh_elf_initialize_funcdesc)
(sh_elf_add_rofixup, sh_elf_osec_to_segment)
(sh_elf_osec_readonly_p, install_movi20_field): New functions.
(sh_elf_relocate_section): Handle new relocations, R_SH_FUNCDESC,
R_SH_GOTFUNCDESC and R_SH_GOTOFFFUNCDESC. Use sh_elf_got_offset
and .got.plt throughout to find _GLOBAL_OFFSET_TABLE_. Add rofixup
read-only section warnings. Handle undefined weak symbols. Generate
fixups for R_SH_DIR32 and GOT entries. Check for cross-segment
relocations and clear EF_SH_PIC. Handle 20-bit relocations.
Always generate R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
(sh_elf_gc_sweep_hook): Handle R_SH_FUNCDESC, R_SH_GOTOFF20,
R_SH_GOTFUNCDESC, R_SH_GOTFUNCDESC20, and R_SH_GOTOFFFUNCDESC.
Handle 20-bit relocations.
(sh_elf_copy_indirect_symbol): Copy function descriptor reference
counts.
(sh_elf_check_relocs): Handle new relocations. Make symbols
dynamic for FDPIC relocs. Account for rofixups. Error for FDPIC
symbol mismatches. Allocate a GOT for R_SH_DIR32. Allocate fixups
for R_SH_DIR32.
(sh_elf_copy_private_data): Copy PT_GNU_STACK size.
(sh_elf_merge_private_data): Copy initial flags. Do not clobber
non-mach flags. Set EF_SH_PIC for FDPIC. Reject FDPIC mismatches.
(sh_elf_finish_dynamic_symbol): Do not handle got_funcdesc entries
here. Rename sgot to sgotplt and srel to srelplt. Handle short_plt,
FDPIC descriptors, and got20. Create R_SH_FUNCDESC_VALUE for FDPIC.
Use install_movi20_field. Rename srel to srelgot. Always generate
R_SH_DIR32 for FDPIC instead of R_SH_RELATIVE.
(sh_elf_finish_dynamic_sections): Fill in the GOT pointer in rofixup.
Do not fill in reserved GOT entries for FDPIC. Correct DT_PLTGOT.
Rename sgot to sgotplt. Assert that the right number of rofixups
and dynamic relocations were allocated.
(sh_elf_use_relative_eh_frame, sh_elf_encode_eh_address): New.
(elf_backend_omit_section_dynsym): Use sh_elf_omit_section_dynsym.
(elf_backend_can_make_relative_eh_frame)
(elf_backend_can_make_lsda_relative_eh_frame)
(elf_backend_encode_eh_address): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME, TARGET_LITTLE_SYM)
(TARGET_LITTLE_NAME, elf_backend_modify_program_headers, elf32_bed):
Redefine for FDPIC vector.
* reloc.c: Add SH FDPIC and movi20 relocations.
* targets.c (_bfd_target_vector): Add FDPIC vectors.
* configure, bfd-in2.h, libbfd.h: Regenerated.
binutils/
* readelf.c (get_machine_flags): Handle EF_SH_PIC and EF_SH_FDPIC.
gas/
* config/tc-sh.c (sh_fdpic): New.
(sh_check_fixup): Handle relocations on movi20.
(parse_exp): Do not reject PIC operators here.
(build_Mytes): Check for unhandled PIC operators here. Use
sh_check_fixup for movi20.
(enum options): Add OPTION_FDPIC.
(md_longopts, md_parse_option, md_show_usage): Add --fdpic.
(sh_fix_adjustable, md_apply_fix): Handle FDPIC and movi20 relocations.
(sh_elf_final_processing): Handle --fdpic.
(sh_uclinux_target_format): New.
(sh_parse_name): Handle FDPIC relocation operators.
* config/tc-sh.h (TARGET_FORMAT): Define specially for TE_UCLINUX.
(sh_uclinux_target_format): Declare for TE_UCLINUX.
* configure.tgt (sh-*-uclinux* | sh[12]-*-uclinux*): Set
em=uclinux.
* doc/c-sh.texi (SH Options): Document --fdpic.
gas/testsuite/
* gas/sh/basic.exp: Run new tests. Handle uClinux like Linux.
* gas/sh/fdpic.d: New file.
* gas/sh/fdpic.s: New file.
* gas/sh/reg-prefix.d: Force big-endian.
* gas/sh/sh2a-pic.d: New file.
* gas/sh/sh2a-pic.s: New file.
* lib/gas-defs.exp (is_elf_format): Include sh*-*-uclinux*.
include/elf/
* sh.h (EF_SH_PIC, EF_SH_FDPIC): Define.
(R_SH_FIRST_INVALID_RELOC_6, R_SH_LAST_INVALID_RELOC_6): New. Adjust
other invalid ranges.
(R_SH_GOT20, R_SH_GOTOFF20, R_SH_GOTFUNCDESC, R_SH_GOTFUNCDESC20)
(R_SH_GOTOFFFUNCDESC, R_SH_GOTOFFFUNCDESC20, R_SH_FUNCDESC)
(R_SH_FUNCDESC_VALUE): New.
ld/
* Makefile.am (ALL_EMULATIONS): Add eshelf_fd.o and eshlelf_fd.o.
(eshelf_fd.c, eshlelf_fd.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-uclinux*): Add shelf_fd and shlelf_fd
emulations.
* emulparams/shelf_fd.sh: New file.
* emulparams/shlelf_fd.sh: New file.
* emulparams/shlelf_linux.sh: Update comment.
ld/testsuite/
* ld-sh/sh.exp: Handle uClinux like Linux.
* lib/ld-lib.exp (is_elf_format): Include sh*-*-uclinux*.
* ld-sh/fdpic-funcdesc-shared.d: New file.
* ld-sh/fdpic-funcdesc-shared.s: New file.
* ld-sh/fdpic-funcdesc-static.d: New file.
* ld-sh/fdpic-funcdesc-static.s: New file.
* ld-sh/fdpic-gotfuncdesc-shared.d: New file.
* ld-sh/fdpic-gotfuncdesc-shared.s: New file.
* ld-sh/fdpic-gotfuncdesc-static.d: New file.
* ld-sh/fdpic-gotfuncdesc-static.s: New file.
* ld-sh/fdpic-gotfuncdesci20-shared.d: New file.
* ld-sh/fdpic-gotfuncdesci20-shared.s: New file.
* ld-sh/fdpic-gotfuncdesci20-static.d: New file.
* ld-sh/fdpic-gotfuncdesci20-static.s: New file.
* ld-sh/fdpic-goti20-shared.d: New file.
* ld-sh/fdpic-goti20-shared.s: New file.
* ld-sh/fdpic-goti20-static.d: New file.
* ld-sh/fdpic-goti20-static.s: New file.
* ld-sh/fdpic-gotofffuncdesc-shared.d: New file.
* ld-sh/fdpic-gotofffuncdesc-shared.s: New file.
* ld-sh/fdpic-gotofffuncdesc-static.d: New file.
* ld-sh/fdpic-gotofffuncdesc-static.s: New file.
* ld-sh/fdpic-gotofffuncdesci20-shared.d: New file.
* ld-sh/fdpic-gotofffuncdesci20-shared.s: New file.
* ld-sh/fdpic-gotofffuncdesci20-static.d: New file.
* ld-sh/fdpic-gotofffuncdesci20-static.s: New file.
* ld-sh/fdpic-gotoffi20-shared.d: New file.
* ld-sh/fdpic-gotoffi20-shared.s: New file.
* ld-sh/fdpic-gotoffi20-static.d: New file.
* ld-sh/fdpic-gotoffi20-static.s: New file.
* ld-sh/fdpic-plt-be.d: New file.
* ld-sh/fdpic-plt-le.d: New file.
* ld-sh/fdpic-plt.s: New file.
* ld-sh/fdpic-plti20-be.d: New file.
* ld-sh/fdpic-plti20-le.d: New file.
* ld-sh/fdpic-stack-default.d: New file.
* ld-sh/fdpic-stack-size.d: New file.
* ld-sh/fdpic-stack.s: New file.
2010-05-03 Tristan Gingold <gingold@adacore.com>
* vms-alpha.c: Add comments.
(struct vms_private_data_struct): Remove image_autoextend field.
(dst_check_allocation): Removed.
(image_write): Remove call to dst_check_allocation.
(vms_slurp_debug): Do not set image_autoextend. Adjust section
size.
(_bfd_vms_slurp_object_records): Remove useless new_type variable.
(alpha_vms_write_exec): Use dst_section to get the dst section.
Write the dmt section.
(evax_bfd_print_image): Also print the dst size in hexa. Fix typo.
(alpha_vms_read_sections_content): Do not set image_autoextend.
include/vms/
2010-05-03 Tristan Gingold <gingold@adacore.com>
* dmt.h: Improve comments.
* internal.h (ELF_SECTION_SIZE): Protect macro args with parentheses.
Invert logic to clarify test for .tbss.
(ELF_IS_SECTION_IN_SEGMENT): Rename to..
(ELF_SECTION_IN_SEGMENT_1): ..this. Add check_vma param. Protect
macro args with parentheses.
(ELF_SECTION_IN_SEGMENT): Define.
(ELF_IS_SECTION_IN_SEGMENT_FILE): Delete.
(ELF_IS_SECTION_IN_SEGMENT_MEMORY): Delete.
bfd/
* elf.c: Replace use of ELF_IS_SECTION_IN_SEGMENT and
ELF_IS_SECTION_IN_SEGMENT_FILE with ELF_SECTION_IN_SEGMENT
throughout file.
(assign_file_positions_for_load_sections): Modify section in
segment warning to ignore overlay vmas.
* elf32-spu.c (spu_elf_object_p): Replace use of
ELF_IS_SECTION_IN_SEGMENT_MEMORY with ELF_SECTION_IN_SEGMENT.
binutils/
* readelf.c (process_program_headers): Replace use of
ELF_IS_SECTION_IN_SEGMENT_MEMORY with ELF_SECTION_IN_SEGMENT.
Most the sim write functions declare their source buffer const because
they only ever read from it. The global sim_write() function does not
follow this convention though which causes some warnings when trying to
pass it const strings or buffers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* dwarf2.h (DWARF2_Internal_LineInfo): Add li_max_ops_per_insn
field.
bfd/
* dwarf2.c (struct line_head): Add maximum_ops_per_insn field.
(struct line_info): Add op_index field, change end_sequence type to
unsigned char.
(new_line_sorts_after): For the same address compare op_index.
(add_line_info): Add op_index argument, store it into the structure.
(decode_line_info): Complain about unknown versions of .debug_line.
Initialize maximum_ops_per_insn. Add op_index state register and
track it.
binutils/
* dwarf.c (struct State_Machine_Registers): Add op_index field,
change end_sequence type to unsigned char.
(reset_state_machine): Clear op_index.
(process_extended_line_op): For DW_LNE_set_address clear op_index.
(display_debug_lines_raw): Initialize li_max_ops_per_insn.
Track op_index state machine register and print it if
li_max_ops_per_insn is != 1.
(display_debug_lines_decoded): Likewise.
mips_fix_loongson2f_jump): New variables.
(md_longopts): Add New options -mfix-loongson2f-nop/jump,
-mno-fix-loongson2f-nop/jump.
(md_parse_option): Initialize variables via above options.
(options): New enums for the above options.
(md_begin): Initialize nop_insn from LOONGSON2F_NOP_INSN.
(fix_loongson2f, fix_loongson2f_nop, fix_loongson2f_jump):
New functions.
(append_insn): call fix_loongson2f().
(mips_handle_align): Replace the implicit nops.
* config/tc-mips.h (MAX_MEM_FOR_RS_ALIGN_CODE): Modified
for the new mips_handle_align().
* doc/c-mips.texi: Document the new options.
* gas/mips/loongson-2f-2.s: New test of -mfix-loongson2f-nop.
* gas/mips/loongson-2f-2.d: Likewise.
* gas/mips/loongson-2f-3.s: New test of -mfix-loongson2f-jump.
* gas/mips/loongson-2f-3.d: Likewise.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h (LOONGSON2F_NOP_INSN): New macro.
* elf/sparc.h (R_SPARC_JMP_IREL, R_SPARC_IRELATIVE): Define.
bfd/
* reloc.c (BFD_RELOC_SPARC_JMP_IREL): New.
(BFD_RELOC_SPARC_IRELATIVE): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elfxx-sparc.h (_bfd_sparc_elf_link_hash_table): Add loc_hash_table
and loc_hash_memory.
(_bfd_sparc_elf_link_hash_table_free): Declare.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): New.
(elf_backend_add_symbol_hook, elf_backend_post_process_headers,
bfd_elf32_bfd_link_hash_table_free): Define.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Set
has_ifunc_symbols if STT_GNU_IFUNC.
(bfd_elf64_bfd_link_hash_table_free): Define.
(elf_backend_post_process_headers): Define always.
* elfxx-sparc.c (sparc_jmp_irel_howto, sparc_irelative_howto): New.
(sparc_reloc_map): Add entries for new IFUNC relocs.
(_bfd_sparc_elf_reloc_type_lookup): Handle new IFUNC relocs.
(_bfd_sparc_elf_info_to_howto_ptr): Likewise.
(elf_sparc_local_htab_hash, elf_sparc_local_htab_eq,
elf_sparc_get_local_sym_hash): New.
(_bfd_sparc_elf_create_dynamic_sections): Move PLT ops initialization
from here...
(_bfd_sparc_elf_link_hash_table_create): ... to here. Allocate
local hash table.
(_bfd_sparc_elf_link_hash_table_free): New.
(create_ifunc_sections): New.
(_bfd_sparc_elf_check_relocs): Unconditionally assign htab->elf.dynobj
and call create_ifunc_sections(). For local STT_GNU_IFUNC symbols
cons up a fake local hash table entry for it. Unconditionally add
a PLT refcount for STT_GNU_IFUNC symbols when h->def_regular. Count
dyn relocs for ifunc.
(_bfd_sparc_elf_adjust_dynamic_symbol): Handle ifunc.
(allocate_dynrelocs): Unconditionally emit a PLT entry when STT_GNU_IFUNC
and h->def_regular. Count GOT dyn relocs for ifunc.
(allocate_local_dynrelocs): New function.
(_bfd_sparc_elf_size_dynamic_sections): Invoke it over the local hash table.
Emit dynamic relocs to irelplt when not shared. Treat iplt like splt.
(_bfd_sparc_elf_relocate_section): Handle ifunc relocations by hand.
(_bfd_sparc_elf_finish_dynamic_symbol): Adjust for non-dynamic ifunc plt
in iplt/irelplt.
ld/testsuite/
* ld-ifunc/ifunc.exp: Run for sparc.
include/elf/
* ppc.h (R_PPC_RELAX32, R_PPC_RELAX32PC, R_PPC_RELAX32_PLT,
R_PPC_RELAX32PC_PLT): Delete.
(R_PPC_RELAX, R_PPC_RELAX_PLT, R_PPC_RELAX_PLTREL24): Define.
bfd/
* elf32-ppc.c (update_plt_info): Clear sec here when addend is
less than 32768..
(ppc_elf_check_relocs): ..rather than doing so here. Ignore new
relax relocs.
(ppc_elf_gc_sweep_hook): Don't segfault when symbol hiding has
removed plt_entry records.
(ppc_elf_tls_setup): Handle PIE calls to __tls_get_addr correctly.
(ppc_elf_tls_optimize): Likewise. Also dec __tls_get_addr refcount
when optimizing code using new tlsgd and tlsld marker relocs.
(ppc_elf_relax_section): Differentiate relaxed PLTREL24 relocs
from ADDR24 relocs using plt or glink. Don't clear the addend
for R_PPC_RELAX_PLTREL24.
(ppc_elf_relocate_section): Correctly handle addends on relaxed
PLTREL24 relocs.
2009-12-03 David Daney <ddaney@caviumnetworks.com>
Adam Nemet <adambnemet@gmail.com>
* elf/mips.h (E_MIPS_MACH_OCTEON2): New machine flag.
binutils/
2009-12-03 David Daney <ddaney@caviumnetworks.com>
Adam Nemet <adambnemet@gmail.com>
* readelf.c (get_machine_flags): Handle E_MIPS_MACH_OCTEON2 case.
* dlltool.c (PAGE_SIZE): Delete.
(PAGE_MASK): Provide default definition based on COFF_PAGE_SIZE.
Check for DLLTOOL_DEFAULT_MX86_64 and DLLTOOL_DEFAULT_I386.
* coff-i386.h (COFF_PAGE_SIZE): Definition moved to coff/i386.h
* i386lh (COFF_PAGE_SIZE): Define.
* x86_64.h (COFF_PAGE_SIZE): Define.
(record_thumb_to_arm_glue, bfd_arm_process_before_allocation):
Change member name class to symbol_class.
* bfd/coff-i960.c (coff_i960_relocate_section) Rename variable
class to class_val. Change member name class to symbol_class.
* bfd/coff-rs6000.c (_bfd_xcoff_swap_aux_in)
(_bfd_xcoff_swap_aux_out): Rename arguments class to in_class.
* bfd/coff-stgo32.c (adjust_aux_in_post)
(adjust_aux_out_pre, adjust_aux_out_post): Rename arguments class
to in_class.
* bfd/coff64-rs6000.c (_bfd_xcoff64_swap_aux_in)
(_bfd_xcoff64_swap_aux_out): Rename arguments class to in_class.
* bfd/coffcode.h (coff_pointerize_aux_hook): Rename variable class
to n_sclass.
* bfd/coffgen.c (coff_write_symbol, coff_pointerize_aux): Rename
variables named class to n_sclass. (coff_write_symbols): Rename
variable class to sym_class. (bfd_coff_set_symbol_class): Rename
argument class to symbol_class.
* bfd/cofflink.c (_bfd_coff_link_hash_newfunc)
(coff_link_add_symbols, _bfd_coff_link_input_bfd)
(_bfd_coff_write_global_sym, _bfd_coff_generic_relocate_section):
Update code to use renamed members.
* bfd/coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Rename
argument class to in_class.
* bfd/libcoff-in.h (struct coff_link_hash_entry, struct
coff_debug_merge_type) Renamed members class to symbol_class and
type_class.
* bfd/libcoff.h Regenerated.
* bfd/peXXigen.c: (_bfd_XXi_swap_aux_in, _bfd_XXi_swap_aux_out):
Rename argument class to in_class.
* bfd/pef.c (bfd_pef_parse_imported_symbol): Update code to use
renamed members.
* bfd/pef.h (struct bfd_pef_imported_symbol): Changed name of
member class to symbol_class.
* binutils/ieee.c (ieee_read_cxx_misc, ieee_read_cxx_class)
(ieee_read_reference): Rename variables named class to cxxclass.
* gas/config/tc-arc.c (struct syntax_classes): Rename member class
to s_class. (arc_extinst): Rename variable class to
s_class. Update code to use renamed members.
* gas/config/tc-mips.c (insn_uses_reg): Rename argument class to
regclass.
* gas/config/tc-ppc.c (ppc_csect, ppc_change_csect, ppc_function)
(ppc_tc, ppc_is_toc_sym, ppc_symbol_new_hook, ppc_frob_label)
(ppc_fix_adjustable, md_apply_fix): Update code to use renamed
members.
* gas/config/tc-ppc.h (struct ppc_tc_sy): Change name of member
from class to symbol_class. (OBJ_COPY_SYMBOL_ATTRIBUTES): Update
code to use renamed members.
* gas/config/tc-score.c (s3_adjust_paritybit): Rename argument
class to i_class.
* gas/config/tc-score7.c (s7_adjust_paritybit): Rename argument
class to i_class.
* gprof/corefile.c (core_create_function_syms): Rename variable
class to cxxclass.
* include/coff/ti.h (GET_LNSZ_SIZE, PUT_LNSZ_SIZE): Updated name
of class variable to in_class to match changes in function that
use this macro.
* include/opcode/ia64.h (struct ia64_operand): Renamed member
class to op_class
* ld/emultempl/elf32.em (gld${EMULATION_NAME}_load_symbols)
(gld${EMULATION_NAME}_try_needed): Rename variable class to
link_class
* opcodes/ia64-dis.c (print_insn_ia64): Update code to use renamed
member.
* opcodes/m88k-dis.c (m88kdis): Rename variable class to in_class.
* opcodes/tic80-opc.c (tic80_symbol_to_value)
(tic80_value_to_symbol): Rename argument class to symbol_class.
* config/bfin-parse.y (asm_1): Implement HLT instruction.
Fix comments for DBGA, DBGAH and DBGAL.
* config/tc-bfin.c (bfin_gen_pseudodbg_assert): Change according
to the new encoding of DBGA, DBGAH, and DBGAL.
include/
* opcode/bfin.h (PseudoDbg_Assert): Add bits_grp and mask_grp.
(PseudoDbg_Assert_grp_bits, PseudoDbg_Assert_grp_mask): Define.
(PseudoDbg_Assert_dbgop_bits, PseudoDbg_Assert_dbgop_mask,
PseudoDbg_Assert_dontcare_bits, PseudoDbg_Assert_dontcare_mask):
Adjust accordingly.
(init_PseudoDbg_Assert): Add PseudoDbg_Assert_grp_bits and
PseudoDbg_Assert_grp_mask.
opcodes/
* bfin-dis.c (decode_pseudodbg_assert_0): Change according
to the new encoding of DBGA, DBGAH, and DBGAL.
(_print_insn_bfin): Likewise.
keyword in c++.
* bfd/aoutx.h (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol.
* bfd/coffgen.c (coff_make_empty_symbol)
(coff_bfd_make_debug_symbol): Rename variable new to new_symbol.
* bfd/cpu-ia64-opc.c (ext_reg, ins_imms_scaled): Rename variable
new to new_insn.
* bfd/doc/chew.c (newentry, add_intrinsic): Rename variable new to
new_d.
* bfd/ecoff.c (_bfd_ecoff_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/elf32-m68k.c (elf_m68k_get_got_entry_type): Rename argument
new to new_reloc.
* bfd/hash.c (bfd_hash_lookup): Rename variable new to new_string.
* bfd/ieee.c (ieee_make_empty_symbol): Rename variable new to
new_symbol.
* bfd/linker.c (bfd_new_link_order): Rename variable new to
new_lo.
* bfd/mach-o.c (bfd_mach_o_sizeof_headers): Rename variable new to
symbol.
* bfd/oasys.c (oasys_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/pdp11.c (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol_type.
* bfd/plugin.c (bfd_plugin_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/rs6000-core.c (CoreHdr, VmInfo): Rename union member new to
new_dump.
(read_hdr, rs6000coff_core_p)
(rs6000coff_core_file_matches_executable_p)
(rs6000coff_core_file_failing_command)
(rs6000coff_core_file_failing_signal): Updated function to use new
union member name.
* bfd/som.c (som_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/syms.c (_bfd_generic_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/tekhex.c (first_phase, tekhex_make_empty_symbol): Rename
variable new to new_symbol.
* binutils/nlmconv.c (main): Rename variable new to new_name.
* gas/config/tc-arm.c (insert_reg_alias): Rename variable new to
new_reg.
* gas/config/tc-dlx.c (parse_operand): Rename variable new to
new_pos.
* gas/config/tc-ia64.c (ia64_gen_real_reloc_type): Rename variable
new to newr.
* gas/config/tc-mcore.c (parse_exp, parse_imm): Rename variable
new to new_pointer.
* gas/config/tc-microblaze.c (parse_exp, parse_imm, check_got):
Change name from new to new_pointer.
* gas/config/tc-or32.c (parse_operand): Rename variable new to
new_pointer.
* gas/config/tc-pdp11.c (md_assemble): Rename variable new to
new_pointer.
* gas/config/tc-pj.c (alias): Change argument new to new_name.
* gas/config/tc-score.c (s3_build_score_ops_hsh): Rename variable
new to new_opcode. (s3_build_dependency_insn_hsh) Rename variable
new to new_i2n. (s3_convert): Rename variables old and new to
r_old and r_new.
* gas/config/tc-score7.c (s7_build_score_ops_hsh): Rename variable
new to new_opcode. (s7_build_dependency_insn_hsh): Rename variable
new to new_i2d. (s7_b32_relax_to_b16, s7_convert_frag): Rename
variables old and new to r_old and r_new.
* gas/config/tc-sh.c (parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-sh64.c (shmedia_parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-tic4x.c (tic4x_operand_parse): Rename variable new
to new_pointer.
* gas/config/tc-z8k.c (parse_exp): Rename variable new to
new_pointer.
* gas/listing.c (listing_newline): Rename variable new to new_i.
* ld/ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop)
(exp_trinop, exp_unop, exp_nameop, exp_assop): Rename variable new
to new_e.
* ld/ldfile.c (ldfile_add_library_path): Rename variable new to
new_dirs. (ldfile_add_arch): Rename variable new to new_arch.
* ld/ldlang.c (new_statement, lang_final, lang_add_wild)
(lang_target, lang_add_fill, lang_add_data, lang_add_assignment)
(lang_add_insert): Rename variable new to new_stmt. (new_afile):
Added missing cast. (lang_memory_region_lookup): Rename variable
new to new_region. (init_os): Rename variable new to
new_userdata. (lang_add_section): Rename variable new to
new_section. (ldlang_add_undef): Rename variable new to
new_undef. (realsymbol): Rename variable new to new_name.
* opcodes/z8kgen.c (internal, gas): Rename variable new to new_op.
Updated sources to avoid using the identifier name "template",
which is a keyword in c++.
* bfd/elf32-arm.c (struct stub_def): Rename member template to
template_sequence. (arm_build_one_stub,
find_stub_size_and_template, arm_size_one_stub, arm_map_one_stub):
Rename variable template to template_sequence.
* bfd/elfxx-ia64.c (elfNN_ia64_relax_br, elfNN_ia64_relax_brl):
Rename variable template to template_val.
* gas/config/tc-arm.c (struct asm_cond, struct asm_psr, struct
asm_barrier_opt): Change member template to
template_name. (md_begin): Update code to reflect new member
names.
* gas/config/tc-i386.c (struct templates, struct _i386_insn)
(match_template, cpu_flags_match, match_reg_size, match_mem_size)
(operand_size_match, md_begin, i386_print_statistics, pi)
(build_vex_prefix, md_assemble, parse_insn, optimize_imm)
(optimize_disp): Updated code to use new names. (parse_insn):
Added casts.
* gas/config/tc-ia64.c (dot_template, emit_one_bundle): Updated
code to use new names.
* gas/config/tc-score.c (struct s3_asm_opcode): Renamed member
template to template_name. (s3_parse_16_32_inst, s3_parse_48_inst,
s3_do_macro_ldst_label, s3_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-score7.c (struct s7_asm_opcode): Renamed member
template to template_name. (s7_parse_16_32_inst,
s7_do_macro_ldst_label, s7_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-tic30.c (md_begin, struct tic30_insn)
(md_assemble): Update code to use new names.
* gas/config/tc-tic54x.c (struct _tic54x_insn, md_begin)
(optimize_insn, tic54x_parse_insn, next_line_shows_parallel):
Update code to use new names.
* include/opcode/tic30.h (template): Rename type template to
insn_template. Updated code to use new name.
* include/opcode/tic54x.h (template): Rename type template to
insn_template.
* opcodes/cris-dis.c (bytes_to_skip): Update code to use new name.
* opcodes/i386-dis.c (putop): Update code to use new name.
* opcodes/i386-gen.c (process_i386_opcodes): Update code to use
new name.
* opcodes/i386-opc.h (struct template): Rename struct template to
insn_template. Update code accordingly.
* opcodes/i386-tbl.h (i386_optab): Update type to use new name.
* opcodes/ia64-dis.c (print_insn_ia64): Rename variable template
to template_val.
* opcodes/tic30-dis.c (struct instruction, get_tic30_instruction):
Update code to use new name.
* opcodes/tic54x-dis.c (has_lkaddr, get_insn_size)
(print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
Update code to use new name.
* opcodes/tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
Update type to new name.
Fix references past allocated memory for i386-*-go32.
* ti.h (COFF_ADJUST_FILEHDR_IN_POST, COFF_ADJUST_FILEHDR_OUT_POST):
Reference F_TARGET_ID only when !COFF0_P.
Stop using bfd_usrdata in libbfd.
* coff-stgo32.c (bfd_coff_go32stub): Remove.
(stub_bytes, comment): Replace STUBSIZE by GO32_STUBSIZE.
(adjust_filehdr_in_post): Declare the abfd parameter as unused.
Replace STUBSIZE by GO32_STUBSIZE. Save now the stub in
filehdr_dst->u.go32.stub. New comment with the reason.
(adjust_filehdr_out_pre): Replace STUBSIZE by GO32_STUBSIZE.
Substitute the removed macro bfd_coff_go32stub.
(adjust_filehdr_out_post, adjust_scnhdr_in_post, adjust_scnhdr_out_pre)
(adjust_scnhdr_out_post, adjust_aux_in_post, adjust_aux_out_pre)
(adjust_aux_out_post): Replace STUBSIZE by GO32_STUBSIZE.
(create_go32_stub, go32_stubbed_coff_bfd_copy_private_bfd_data):
Replace STUBSIZE by GO32_STUBSIZE. Substitute the removed macro
bfd_coff_go32stub.
* coffcode.h (coff_mkobject_hook): Initialize coff->go32stub.
* libcoff-in.h (coff_data_type): New field go32stub.
* libcoff.h: Regenerated.
include/coff/
Stop using bfd_usrdata in libbfd.
* go32exe.h (struct external_filehdr_go32_exe <stub>, FILHSZ): Replace
STUBSIZE by GO32_STUBSIZE.
(STUBSIZE): Move the definition ...
* internal.h (GO32_STUBSIZE): ... here and rename it.
(struct internal_filehdr <go32stub>, F_GO32STUB): New.
