* config/tc-i386.c (arch_entry): Add len and skip.
(cpu_arch): Use STRING_COMMA_LEN.
(MESSAGE_TEMPLATE): New.
(show_arch): Likewise.
(md_show_usage): Use show_arch.
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* config/tc-i386.c (build_modrm_byte): Do not swap REG and
NDS operands for FMA4.
gas/testsuite/
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* gas/i386/fma4.d: Updated patterns.
* gas/i386/x86-64-fma4.d: Same.
opcodes/
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* i386-dis.c (OP_VEX_FMA): Removed.
(VexFMA): Removed.
(Vex128FMA): Removed.
(prefix_table): First source operand of FMA4 insns is decoded
with Vex not with VexFMA.
(OP_EX_VexW): Second source operand is decoded with get_vex_imm8
when vex.w is set. Third source operand is decoded with
get_vex_imm8 when vex.w is cleared.
(OP_VEX_FMA): Removed.
* config/tc-mep.c (md_pseudo_table): Remove dwarf2 pseudo
as they are already defined in obj-elf.c
* config/tc-m32c.c (md_pseudo_table): Ditto.
* config/tc-spu.c (md_pseudo_table): Ditto.
* config/tc-avr.c (md_pseudo_table): Ditto.
'defl' in cases where the space between the keyword and the
expression has been scrubbed away.
Do not check whether a symbol is redefined with 'equ' here;
the function equals takes an argument indicating whether
redefinitions are allowed.
Only call LISTING_NEWLINE if needed, and then after the call to
bump_line_counters.
2009-10-07 Vincent Riviere <vincent.riviere@freesbee.fr>
PR gas/3041
* config/tc-m68k.c (tc_gen_reloc): Fix addend for relocations
located in data section an referencing a weak symbol.
gas/testsuite:
2009-10-07 Vincent Riviere <vincent.riviere@freesbee.fr>
PR gas/3041
* gas/m68k/all.exp: Added "p3041data".
* gas/m68k/p3041.d, gas/m68k/p3041.s: Added tests of weak references
from text section to all possible sections.
* gas/m68k/p3041data.d, gas/m68k/p3041data.s: New test. Check weak
references from data section.
* config/tc-ia64.c (parse_operand): Use expression rather than
expression_and_evalute.
(parse_operand_and_eval): New function. Replace all uses of
parse_operand outside of parse_operands with this function.
(parse_operans_maybe_eval): New function. Replace uses of
parse_operand in parse_operands, except for the dummy, with
this function.
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10637
* config/tc-i386-intel.c (intel_state): Add has_offset.
(i386_intel_simplify): Set intel_state.has_offset to 1 for
O_offset.
(i386_intel_operand): Turn on intel_state.is_mem if
intel_state.has_offset is 0 and the last char is ']'.
gas/testsuite/
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10637
* gas/i386/disp.s: Add tests for Intel syntax.
* gas/i386/x86-64-disp.s: Likewise.
* gas/i386/disp.d: Updated.
* gas/i386/intelok.d: Likewise.
* gas/i386/x86-64-disp.d: Likewise.
* gas/i386/disp-intel.d: New.
* gas/i386/x86-64-disp-intel.d: Likewise.
* gas/i386/i386.exp: Run disp-intel and x86-64-disp-intel.
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10636
* config/tc-i386.c (optimize_disp): Set disp32 for 64bit only
if there is an ADDR_PREFIX.
(i386_finalize_displacement): Repor error if signed 32bit
displacement is out of range.
gas/testsuite/
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10636
* gas/i386/disp.d: New.
* gas/i386/disp.s: Likewise.
* gas/i386/x86-64-disp.d: Likewise.
* gas/i386/x86-64-disp.s: Likewise.
* gas/i386/i386.exp: Run disp and x86-64-disp.
* gas/i386/x86-64-addr32.s: Add high 32bit displacement tests.
* gas/i386/x86-64-addr32.d: Updated.
* gas/i386/x86-64-addr32-intel.d: Likewise.
* gas/i386/x86-64-inval.l: Likewise.
* gas/i386/x86-64-prescott.d: Likewise.
* gas/i386/x86-64-inval.s: Add invalid displacement tests.
* gas/i386/x86-64-prescott.s: Replace 0x90909090 displacement
with 0x909090.
* config/tc-mips.c (MIPS_JALR_HINT_P): Take an expr argument.
Require the target to be a bare symbol on targets with
in-place addends.
(macro_build_jalr): Update accordingly.
(mips_fix_adjustable): Don't reduce R_MIPS_JALRs on targets
with in-place addends.
gas/testsuite/
* gas/mips/jalr2.s, gas/mips/jalr2.d: New test.
* gas/mips/jal-svr4pic.d: Don't expect R_MIPS_JALRs to be reduced.
* gas/mips/jal-xgot.d: Likewise.
* gas/mips/mips-abi32-pic2.d: Likewise.
* gas/mips/mips.exp: Run it.
* config/tc-mmix.c (md_assemble) <case mmix_operands_xyz_opt>:
Allow register operands for SWYM as for TRIP and TRAP. Correct
operand handling and error checking. Never emit
BFD_RELOC_MMIX_REG_OR_BYTE for operands to these insns.
* config/tc-d10v.c: Include dwarf2dbg.h.
(write_long, write_1_short, write_2_short): Call dwarf2_emit_insn.
(d10v_frob_label): New function.
* config/tc-d10v.h (d10v_frob_label): Declare.
(tc_frob_label): Define as d10v_frob_label.
gas/testsuite/
* gas/lns/lns-common-1.s: Use two nops between each .loc.
* gas/lns/lns.exp: Don't exclude d10v.
* config/obj-coff.c (weak_uniquify): Use an_external_name when TE_PE.
* symbols.c (an_external_name): Define when TE_PE.
(S_SET_EXTERNAL): Assign an_external_name when TE_PE.
* tc.h (an_external_name): Declare when TE_PE.
2009-09-07 Tristan Gingold <gingold@adacore.com>
* bfd.m4 (BFD_HAVE_TIME_TYPE_MEMBER,
BFD_HAVE_SYS_STAT_TYPE_MEMBER): Moved to gas/acinclude.m4
* configure.in: Move tests for tm_gmtoff, st_mtim.tv_sec and
st_mtim.tv_nsec to gas/configure.in
(bfd_elf64_ia64_vms_vec): Remove vmsutil.lo
* configure: Regenerate.
* config.in: Regenerate.
* vmsutil.c: Moved to gas/config/te-vms.c
* vmsutil.h: Removed.
* Makefile.am (BFD32_BACKENDS_CFILES): Remove vmsutil.c
(BFD32_BACKENDS): Remove vmsutil.lo
* Makefile.in: Regenerate.
gas/:
2009-09-07 Tristan Gingold <gingold@adacore.com>
* Makefile.am (TARG_ENV_CFILES): New variable. Set to te-vms.c
(POTFILES): Add $(TARG_ENV_CFILES) in definition.
(EXTRA_as_new_SOURCES): Ditto.
* Makefile: Regenerate.
* acinclude.m4 (BFD_HAVE_TIME_TYPE_MEMBER,
BFD_HAVE_SYS_STAT_TYPE_MEMBER): New macro created from bfd/bfd.m4.
* configure.in: Add Tests for tm_gmtoff, st_mtim.tv_sec and
st_mtim.tv_nsec (from bfd/configure.in). Check for time.h and
sys/stat.h headers.
Add te-vms.o in extra_objects if te_file is vms.
* configure: Regenerate.
* config.in: Regenerate.
* config/te-vms.c: New file, from bfd/vmsutil.c
(vms_dwarf2_file_time_name, vms_dwarf2_file_size_name)
(vms_dwarf2_file_name): New functions.
(vms_file_stats_name): Make it static, add a dirname parameter to
locally create the full pathname.
* config/te-vms.h: Add a copyright header.
Declare the above functions.
(DWARF2_FILE_TIME_NAME, DWARF2_FILE_SIZE_NAME, DWARF2_FILE_NAME): Use
the above functions in the definition.
* makefile.vms (OBJS): Add te-vms.obj.
(te-vms.obj): Create a specific target.
* configure.com: Create targ-env.h using a per target value.
Compile te-vms.c for ia64.
(record_thumb_to_arm_glue, bfd_arm_process_before_allocation):
Change member name class to symbol_class.
* bfd/coff-i960.c (coff_i960_relocate_section) Rename variable
class to class_val. Change member name class to symbol_class.
* bfd/coff-rs6000.c (_bfd_xcoff_swap_aux_in)
(_bfd_xcoff_swap_aux_out): Rename arguments class to in_class.
* bfd/coff-stgo32.c (adjust_aux_in_post)
(adjust_aux_out_pre, adjust_aux_out_post): Rename arguments class
to in_class.
* bfd/coff64-rs6000.c (_bfd_xcoff64_swap_aux_in)
(_bfd_xcoff64_swap_aux_out): Rename arguments class to in_class.
* bfd/coffcode.h (coff_pointerize_aux_hook): Rename variable class
to n_sclass.
* bfd/coffgen.c (coff_write_symbol, coff_pointerize_aux): Rename
variables named class to n_sclass. (coff_write_symbols): Rename
variable class to sym_class. (bfd_coff_set_symbol_class): Rename
argument class to symbol_class.
* bfd/cofflink.c (_bfd_coff_link_hash_newfunc)
(coff_link_add_symbols, _bfd_coff_link_input_bfd)
(_bfd_coff_write_global_sym, _bfd_coff_generic_relocate_section):
Update code to use renamed members.
* bfd/coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Rename
argument class to in_class.
* bfd/libcoff-in.h (struct coff_link_hash_entry, struct
coff_debug_merge_type) Renamed members class to symbol_class and
type_class.
* bfd/libcoff.h Regenerated.
* bfd/peXXigen.c: (_bfd_XXi_swap_aux_in, _bfd_XXi_swap_aux_out):
Rename argument class to in_class.
* bfd/pef.c (bfd_pef_parse_imported_symbol): Update code to use
renamed members.
* bfd/pef.h (struct bfd_pef_imported_symbol): Changed name of
member class to symbol_class.
* binutils/ieee.c (ieee_read_cxx_misc, ieee_read_cxx_class)
(ieee_read_reference): Rename variables named class to cxxclass.
* gas/config/tc-arc.c (struct syntax_classes): Rename member class
to s_class. (arc_extinst): Rename variable class to
s_class. Update code to use renamed members.
* gas/config/tc-mips.c (insn_uses_reg): Rename argument class to
regclass.
* gas/config/tc-ppc.c (ppc_csect, ppc_change_csect, ppc_function)
(ppc_tc, ppc_is_toc_sym, ppc_symbol_new_hook, ppc_frob_label)
(ppc_fix_adjustable, md_apply_fix): Update code to use renamed
members.
* gas/config/tc-ppc.h (struct ppc_tc_sy): Change name of member
from class to symbol_class. (OBJ_COPY_SYMBOL_ATTRIBUTES): Update
code to use renamed members.
* gas/config/tc-score.c (s3_adjust_paritybit): Rename argument
class to i_class.
* gas/config/tc-score7.c (s7_adjust_paritybit): Rename argument
class to i_class.
* gprof/corefile.c (core_create_function_syms): Rename variable
class to cxxclass.
* include/coff/ti.h (GET_LNSZ_SIZE, PUT_LNSZ_SIZE): Updated name
of class variable to in_class to match changes in function that
use this macro.
* include/opcode/ia64.h (struct ia64_operand): Renamed member
class to op_class
* ld/emultempl/elf32.em (gld${EMULATION_NAME}_load_symbols)
(gld${EMULATION_NAME}_try_needed): Rename variable class to
link_class
* opcodes/ia64-dis.c (print_insn_ia64): Update code to use renamed
member.
* opcodes/m88k-dis.c (m88kdis): Rename variable class to in_class.
* opcodes/tic80-opc.c (tic80_symbol_to_value)
(tic80_value_to_symbol): Rename argument class to symbol_class.
* config/bfin-parse.y (asm_1): Implement HLT instruction.
Fix comments for DBGA, DBGAH and DBGAL.
* config/tc-bfin.c (bfin_gen_pseudodbg_assert): Change according
to the new encoding of DBGA, DBGAH, and DBGAL.
include/
* opcode/bfin.h (PseudoDbg_Assert): Add bits_grp and mask_grp.
(PseudoDbg_Assert_grp_bits, PseudoDbg_Assert_grp_mask): Define.
(PseudoDbg_Assert_dbgop_bits, PseudoDbg_Assert_dbgop_mask,
PseudoDbg_Assert_dontcare_bits, PseudoDbg_Assert_dontcare_mask):
Adjust accordingly.
(init_PseudoDbg_Assert): Add PseudoDbg_Assert_grp_bits and
PseudoDbg_Assert_grp_mask.
opcodes/
* bfin-dis.c (decode_pseudodbg_assert_0): Change according
to the new encoding of DBGA, DBGAH, and DBGAL.
(_print_insn_bfin): Likewise.
(F_REG_HIGH): Redefine.
(F_REG_NONE): New macro.
(F_REG_LOW): New macro.
(REG_CLASS): Enclose macro argument in parentheses when used.
(REG_EVEN): Likewise.
(IS_H): Use flags.
(IS_HCOMPL): Use flags.
* config/bfin-lex.l (SP.L, SP.H, FP.L, FP.H): Set flags.
(parse_reg): Set flags.
(parse_halfreg): Set flags.
* config/gas/bfin-parse.y (asm_1): Clean up and unify error handling
for load and store insns.
(neg_value): Delete function.
testsuite/
From Bernd Schmidt <bernd.schmidt@analog.com>
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s:
Check error messages for invalid load/store insns.
* config/tc-bfin.c (bfin_fix_adjustable): Partially revert the
2007-08-23 change; BFD_RELOC_BFIN_GOT is not adjustable.
2007-08-23 Jie Zhang <jie.zhang@analog.com>
* config/tc-bfin.c (bfin_fix_adjustable): Adjust
BFD_RELOC_BFIN_GOT, BFD_RELOC_BFIN_GOT17M4 and
BFD_RELOC_BFIN_FUNCDESC_GOT17M4.
(read_a_source_file): Pass the beginning of the symbol through
the new argument of TC_START_LABEL.
* config/tc-arm.h (TC_START_LABEL): Add a new argument.
* config/tc-bfin.c (bfin_start_label): Only search '(' and '['
from the beginning of the symbol.
* config/tc-bfin.h (TC_START_LABEL): Add the new argument.
* config/tc-d30v.h (TC_START_LABEL): Likewise.
* config/tc-fr30.h (TC_START_LABEL): Likewise.
* config/tc-m32c.h (TC_START_LABEL): Likewise.
* config/tc-m32r.h (TC_START_LABEL): Likewise.
* config/tc-mep.h (TC_START_LABEL): Likewise.
testsuite/
* gas/bfin/stack2.s: Add pop multiple instruction with a label
on the same line.
* gas/bfin/stack2.d: Adjust accordingly.
keyword in c++.
* bfd/aoutx.h (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol.
* bfd/coffgen.c (coff_make_empty_symbol)
(coff_bfd_make_debug_symbol): Rename variable new to new_symbol.
* bfd/cpu-ia64-opc.c (ext_reg, ins_imms_scaled): Rename variable
new to new_insn.
* bfd/doc/chew.c (newentry, add_intrinsic): Rename variable new to
new_d.
* bfd/ecoff.c (_bfd_ecoff_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/elf32-m68k.c (elf_m68k_get_got_entry_type): Rename argument
new to new_reloc.
* bfd/hash.c (bfd_hash_lookup): Rename variable new to new_string.
* bfd/ieee.c (ieee_make_empty_symbol): Rename variable new to
new_symbol.
* bfd/linker.c (bfd_new_link_order): Rename variable new to
new_lo.
* bfd/mach-o.c (bfd_mach_o_sizeof_headers): Rename variable new to
symbol.
* bfd/oasys.c (oasys_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/pdp11.c (NAME (aout, make_empty_symbol)): Rename variable
new to new_symbol_type.
* bfd/plugin.c (bfd_plugin_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/rs6000-core.c (CoreHdr, VmInfo): Rename union member new to
new_dump.
(read_hdr, rs6000coff_core_p)
(rs6000coff_core_file_matches_executable_p)
(rs6000coff_core_file_failing_command)
(rs6000coff_core_file_failing_signal): Updated function to use new
union member name.
* bfd/som.c (som_make_empty_symbol): Rename variable new to
new_symbol_type.
* bfd/syms.c (_bfd_generic_make_empty_symbol): Rename variable new
to new_symbol.
* bfd/tekhex.c (first_phase, tekhex_make_empty_symbol): Rename
variable new to new_symbol.
* binutils/nlmconv.c (main): Rename variable new to new_name.
* gas/config/tc-arm.c (insert_reg_alias): Rename variable new to
new_reg.
* gas/config/tc-dlx.c (parse_operand): Rename variable new to
new_pos.
* gas/config/tc-ia64.c (ia64_gen_real_reloc_type): Rename variable
new to newr.
* gas/config/tc-mcore.c (parse_exp, parse_imm): Rename variable
new to new_pointer.
* gas/config/tc-microblaze.c (parse_exp, parse_imm, check_got):
Change name from new to new_pointer.
* gas/config/tc-or32.c (parse_operand): Rename variable new to
new_pointer.
* gas/config/tc-pdp11.c (md_assemble): Rename variable new to
new_pointer.
* gas/config/tc-pj.c (alias): Change argument new to new_name.
* gas/config/tc-score.c (s3_build_score_ops_hsh): Rename variable
new to new_opcode. (s3_build_dependency_insn_hsh) Rename variable
new to new_i2n. (s3_convert): Rename variables old and new to
r_old and r_new.
* gas/config/tc-score7.c (s7_build_score_ops_hsh): Rename variable
new to new_opcode. (s7_build_dependency_insn_hsh): Rename variable
new to new_i2d. (s7_b32_relax_to_b16, s7_convert_frag): Rename
variables old and new to r_old and r_new.
* gas/config/tc-sh.c (parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-sh64.c (shmedia_parse_exp): Rename variable new to
new_pointer.
* gas/config/tc-tic4x.c (tic4x_operand_parse): Rename variable new
to new_pointer.
* gas/config/tc-z8k.c (parse_exp): Rename variable new to
new_pointer.
* gas/listing.c (listing_newline): Rename variable new to new_i.
* ld/ldexp.c (exp_intop, exp_bigintop, exp_relop, exp_binop)
(exp_trinop, exp_unop, exp_nameop, exp_assop): Rename variable new
to new_e.
* ld/ldfile.c (ldfile_add_library_path): Rename variable new to
new_dirs. (ldfile_add_arch): Rename variable new to new_arch.
* ld/ldlang.c (new_statement, lang_final, lang_add_wild)
(lang_target, lang_add_fill, lang_add_data, lang_add_assignment)
(lang_add_insert): Rename variable new to new_stmt. (new_afile):
Added missing cast. (lang_memory_region_lookup): Rename variable
new to new_region. (init_os): Rename variable new to
new_userdata. (lang_add_section): Rename variable new to
new_section. (ldlang_add_undef): Rename variable new to
new_undef. (realsymbol): Rename variable new to new_name.
* opcodes/z8kgen.c (internal, gas): Rename variable new to new_op.
Updated sources to avoid using the identifier name "template",
which is a keyword in c++.
* bfd/elf32-arm.c (struct stub_def): Rename member template to
template_sequence. (arm_build_one_stub,
find_stub_size_and_template, arm_size_one_stub, arm_map_one_stub):
Rename variable template to template_sequence.
* bfd/elfxx-ia64.c (elfNN_ia64_relax_br, elfNN_ia64_relax_brl):
Rename variable template to template_val.
* gas/config/tc-arm.c (struct asm_cond, struct asm_psr, struct
asm_barrier_opt): Change member template to
template_name. (md_begin): Update code to reflect new member
names.
* gas/config/tc-i386.c (struct templates, struct _i386_insn)
(match_template, cpu_flags_match, match_reg_size, match_mem_size)
(operand_size_match, md_begin, i386_print_statistics, pi)
(build_vex_prefix, md_assemble, parse_insn, optimize_imm)
(optimize_disp): Updated code to use new names. (parse_insn):
Added casts.
* gas/config/tc-ia64.c (dot_template, emit_one_bundle): Updated
code to use new names.
* gas/config/tc-score.c (struct s3_asm_opcode): Renamed member
template to template_name. (s3_parse_16_32_inst, s3_parse_48_inst,
s3_do_macro_ldst_label, s3_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-score7.c (struct s7_asm_opcode): Renamed member
template to template_name. (s7_parse_16_32_inst,
s7_do_macro_ldst_label, s7_build_score_ops_hsh): Update code to
use new names.
* gas/config/tc-tic30.c (md_begin, struct tic30_insn)
(md_assemble): Update code to use new names.
* gas/config/tc-tic54x.c (struct _tic54x_insn, md_begin)
(optimize_insn, tic54x_parse_insn, next_line_shows_parallel):
Update code to use new names.
* include/opcode/tic30.h (template): Rename type template to
insn_template. Updated code to use new name.
* include/opcode/tic54x.h (template): Rename type template to
insn_template.
* opcodes/cris-dis.c (bytes_to_skip): Update code to use new name.
* opcodes/i386-dis.c (putop): Update code to use new name.
* opcodes/i386-gen.c (process_i386_opcodes): Update code to use
new name.
* opcodes/i386-opc.h (struct template): Rename struct template to
insn_template. Update code accordingly.
* opcodes/i386-tbl.h (i386_optab): Update type to use new name.
* opcodes/ia64-dis.c (print_insn_ia64): Rename variable template
to template_val.
* opcodes/tic30-dis.c (struct instruction, get_tic30_instruction):
Update code to use new name.
* opcodes/tic54x-dis.c (has_lkaddr, get_insn_size)
(print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
Update code to use new name.
* opcodes/tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
Update type to new name.
* config/tc-xtensa.c (config_max_slots): New global variable.
(md_begin): Set config_max_slots.
(total_frag_text_expansion): Use config_max_slots instead of
MAX_SLOTS.
(xg_init_vinsn): Likewise.
(xg_clear_vinsn): Likewise.
(xg_free_vinsn): Likewise.
* config/tc-xtensa.h (xtensa_frag_data): Rename unused field fr_prev
to no_transform_end.
* config/tc-xtensa.c (xtensa_mark_difference_of_two_symbols): Set
and use no_transform_end.
* config/tc-xtensa.c (xtensa_create_xproperty_segments): Use
sizeof instead of hard-coded value.
(add_xt_block_frags): Remove unused local variable.
(frag_flags_to_number): Change return type to flagword. Remove
unused local variable.
* config/tc-arm.c (marked_pr_dependency, mapstate): Delete global
variables.
(mapping_state): Use the section's mapstate.
(mapping_state_2): Likewise. Skip special sections.
(s_arm_unwind_fnend): Use the section's marked_pr_dependency.
(arm_elf_change_section): Do not set deleted globals.
* config/tc-arm.h (struct arm_segment_info_type): Document
marked_pr_dependency.
gas/testsuite/
* gas/arm/mapping2.s: Test code after .ident.
* config/tc-mips.c (MIPS_JALR_HINT_P): New define. For IRIX, it is
true for new abi. For non-IRIX targets, it is always true.
(macro_build_jalr): If MIPS_JALR_HINT_P, emit BFD_RELOC_MIPS_JALR.
* binutils-all/arm/thumb2-cond.s: Use instructions instead of
.short.
gas/
* config/obj-elf.c (obj_elf_ident): Notify section change to the hook.
* config/tc-arm.c (make_mapping_symbol): New function, from
mapping_state. Save mapping symbols in the frag.
(insert_data_mapping_symbol): New.
(mapping_state): Use make_mapping_symbol, improve state transitions.
(mapping_state_2): New. Provide dummy definition.
(opcode_select): Do not call mapping_state.
(s_bss): Call md_elf_section_change_hook instead of mapping_state.
(output_inst): Update use of tc_frag_data.
(new_automatic_it_block): Call mapping_state before emitting the
IT instruction.
(md_assemble): Move mapping_state to just before outputting the
new instruction.
(arm_handle_align): Update use of tc_frag_data.
Call insert_data_mapping_symbol.
(arm_init_frag): Update use of tc_frag_data. Call
mapping_state_2.
(arm_elf_change_section): Always update the mapping symbol FSM state.
(check_mapping_symbols): New function.
(arm_adjust_symtab): Use check_mapping_symbols.
* config/tc-arm.h (struct arm_frag_type): New.
(TC_FRAG_TYPE): Change to struct arm_frag_type.
(TC_FRAG_INIT): Pass max_chars.
(arm_init_frag): Update prototype.
gas/testsuite/
* gas/arm/mapdir.d, gas/arm/mapdir.s: New files.
* gas/arm/mapping.d: Adapted to new symbols generation.
* gas/arm/mapping2.d: New test case.
* gas/arm/mapping2.s: New file.
* gas/arm/mapping3.d: New test case.
* gas/arm/mapping3.s: New file.
* gas/arm/mapping4.d: New test case.
* gas/arm/mapping4.s: New file.
* gas/arm/mapshort-eabi.d: Adapted to new symbols generation.
* gas/elf/section2.e-armeabi: Adapted to new symbols generation.
2009-07-27 Jan Beulich <jbeulich@novell.com>
* obj-elf.c (elf_file_symbol): Replace symbol name set up by
symbol_new() with the passed in, unmodified one.
gas/testsuite/
2009-07-27 Jan Beulich <jbeulich@novell.com>
* gas/elf/file.[ds]: New.
* gas/elf/elf.exp: Run new test.
* config/tc-cr16.c (md_apply_fix): Put the addend value alone in to
object file without symbol values.
(tc_gen_reloc): For local symbols resolved or its absolute symbol,
then set the relocation type as NULL.
gnu_unique_object.
* doc/as.texinfo: Document new feature of .type directive.
* NEWS: Mention support for gnu_unique_object symbol type.
* common.h (STB_GNU_UNIQUE): Define.
* NEWS: Mention the linker's support for symbols with a binding of
STB_GNU_UNIQUE.
* gas/elf/type.s: Add unique global symbol definition.
* gas/elf/type.e: Add expected readelf output for global unique
symbol.
* elfcpp.h (enum STB): Add STB_GNU_UNIQUE.
* readelf.c (get_symbol_binding): For Linux targeted files return
UNIQUE for symbols with the STB_GNU_UNIQUE binding.
* doc/binutils.texi: Document the meaning of the 'u' symbol
binding in the output of nm and objdump --syms.
* elf-bfd.h (struct elf_link_hash_entry): Add unique_global field.
* elf.c (swap_out_syms): Set binding to STB_GNU_UNIQUE for symbols
with the BSF_GNU_UNIQUE flag bit set.
* elfcode.h (elf_slurp_symbol_table): Set the BSF_GNU_UNIQUE flag
for symbols with STB_GNU_UNIQUE binding.
* elflink.c (_bfd_elf_merge_symbol): Set unique_global for symbols
with the STB_GNU_UNIQUE binding.
(elf_link_add_object_symbols): Set the BSF_GNU_UNIQUE flag for
symbols with STB_GNU_UNIQUE binding. Set STB_GNU_UNIQUE for
symbols with the unique_global field set.
(elf_link_output_extsym): Set unique_global field for symbols with
the STB_GNU_UNIQUE binding.
* syms.c (struct bfd_symbol): Define BSF_GNU_UNIQUE flag bit.
(bfd_print_symbol_vandf): Print a 'u' character for BSF_GNU_UNIQUE
symbols.
(bfd_decode_symclass): Return a 'u' character for BSF_GNU_UNIQUE
symbols.
* bfd-in2.h: Regenerate.
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* config/tc-i386.c (i386_align_code): Tune for 32bit nops in
64bit.
(i386_target_format): Set cpu_arch_isa_flags.bitfield.cpulm
for 64bit.
gas/testsuite/
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* gas/i386/i386.exp: Run x86-64-nops-1-pentium.
* gas/i386/x86-64-nops-1-pentium.d: New.
* config/tc-i386.c (md_assemble): Update operand types.
(update_imm): Updated.
(finalize_imm): Update the first 2 immediate operands only
for instructions with 2 operands or more.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define in terms of
MAX_MEM_ALIGNMENT_BYTES.
* config/tc-arm.c (arm_frag_align_code): Replace hard coded
constant with MAX_MEM_FOR_RS_ALIGN_CODE.
* gas/arm/align64.s: New test case.
* gas/arm/align64.d: Expected disassembly.
* config/tc-arm.c (md_assemble): Added validation.
gas/testsuite
* gas/arm/thumb-w-bad.d: New test case.
* gas/arm/thumb-w-bad.l: New file.
* gas/arm/thumb-w-bad.s: New file.
* gas/arm/thumb-w-good.d: New test case.
* gas/arm/thumb-w-good.s: New file.
(set_it_insn_type_nonvoid): New macro.
(emit_thumb32_expr): New function.
(thumb_insn_size): New function.
(emit_insn): New function.
(s_arm_elf_inst): New function.
(md_pseudo_table): New pseudo-opcode entries added.
* doc/c-arm.texi: New directive added.
* gas/arm/inst-po.d: New testcase.
* gas/arm/inst-po.s: New file.
* gas/arm/inst-po-2.d: New testcase.
* gas/arm/inst-po-2.s: New file.
* gas/arm/inst-po-2.l: New file.
* gas/arm/inst-po-3.d: New testcase.
* gas/arm/inst-po-3.s: New file.
* gas/arm/inst-po-be.d: New testcase.
32 bits for relaxable branches so that we can relax them later.
(md_estimate_size_before_relax): Assume IVC2 branches will be relaxed.
(mep_relax_frag): New.
(md_convert_frag): Relax IVC2 branches in-place.
* config/tc-mep.h ((mep_relax_frag): New.
(implicit_it_mode): New global.
(it_instruction_type): New enum.
(arm_parse_it_mode): New function.
(arm_long_opts): New option added.
(arm_it): New field.
(it_state): New enum.
(now_it): New macro.
(check_it_blocks_finished): New function.
(insns[]): Use the IT Thumb opcodes for ARM too.
(arm_cleanup): Call check_it_blocks_finished.
(now_it_compatible): New function.
(conditional_insn): New function.
(set_it_insn_type): New macro.
(set_it_insn_type_last): New macro.
(do_it): Call automatic IT machinery functions.
(do_t_add_sub): Likewise
(do_t_arit3): Likewise.
(do_t_arit3c): Likewise.
(do_t_blx): Likewise.
(do_t_branch): Likewise.
(do_t_bkpt): Likewise.
(do_t_branch23): Likewise.
(do_t_bx): Likewise.
(do_t_bxj): Likewise.
(do_t_cps): Likewise.
(do_t_cpsi): Likewise.
(do_t_cbz): Likewise.
(do_t_it): Likewise.
(encode_thumb2_ldmstm): Likewise.
(do_t_ldst): Likewise.
(do_t_mov_cmp): Likewise.
(do_t_mvn_tst): Likewise.
(do_t_mul): Likewise.
(do_t_neg): Likewise.
(do_t_setend): Likewise.
(do_t_shift): Likewise.
(do_t_tb): Likewise.
(output_it_inst): New function.
(new_automatic_it_block): New function.
(close_automatic_it_block): New function.
(now_it_add_mask): New function.
(it_fsm_pre_encode): New function.
(handle_it_state): New function.
(it_fsm_post_encode): New function.
(force_automatic_it_block_close): New function.
(in_it_block): New function.
(md_assemble): Call automatic IT block machinery functions.
(arm_frob_label): Likewise.
(arm_opts): New element.
* config/tc-arm.h (it_state): New enum.
(current_it): New struct.
(arm_segment_info_type): New member added.
* doc/c-arm.texi: New option -mimplicit-it documented.
* gas/arm/arm-it-auto.d: New test.
* gas/arm/arm-it-auto.s: New file.
* gas/arm/arm-it-auto-2.d: New test case.
* gas/arm/arm-it-auto-2.s: New file.
* gas/arm/arm-it-auto-3.d: New test case.
* gas/arm/arm-it-auto-3.s: New file.
* gas/arm/arm-it-bad.d: New test case.
* gas/arm/arm-it-bad.l: New file.
* gas/arm/arm-it-bad.s: New file.
* gas/arm/arm-it-bad-2.d: New test case.
* gas/arm/arm-it-bad-2.l: New file.
* gas/arm/arm-it-bad-2.s: New file.
* gas/arm/arm-it-bad-3.d: New test case.
* gas/arm/arm-it-bad-3.l: New file.
* gas/arm/arm-it-bad-3.s: New file.
* gas/arm/thumb2_it_auto.d: New test.
* gas/arm/thumb2_it_bad.l: Error message updated.
* gas/arm/thumb2_it_bad_auto.d: New test.
* gas/arm/thumb2_it.d: Comment added.
* gas/arm/thumb2_it_bad.d: Comment added.
* gas/tc-arm.c (do_t_ssat): Move common code from here...
(do_t_usat): ... and here to...
(do_t_ssat_usat): New function: ... here. Add code to check that
the shift value, if present, is in range.
* gas/arm/thumb2_bad_reg.s: Add tests for SSAT and USAT with an
out of range shift.
* gas/arm/thumb2_bad_reg.l: Update expected error messages.
* elf32-vax.c (elf_vax_check_relocs): Handle the visibility
attribute.
(elf_vax_relocate_section): Likewise.
gas/
* config/tc-vax.c (md_estimate_size_before_relax): Accept
indirect symbol references in the PIC mode and emit a
PC-relative relocation instead of a GOT/PLT one. Likewise
for symbols known to be hidden at this point.
* arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
instruction.
* gas/arm/thumb32.d: Fix expected binary value of SEV.W instruction.
* config/tc-arm.c (T16_32_TAB): Fix binary value of SEV.W
instruction.
* config/tc-i386.c (md_estimate_size_before_relax): Don't relax
branches to weak symbols.
(md_apply_fix): Don't convert fixes against weak symbols to
section-relative offsets, but save addend for later reloc emission.
(tc_gen_reloc): When emitting reloc against weak symbol, adjust
addend to pre-compensate for bfd_install_relocation.
* config/tc-mips.c (nops_for_vr4130): Don't check noreorder_p.
(nops_for_insn): Likewise.
gas/testsuite/
* gas/mips/vr4130.s, gas/mips/vr4130.d: Expect part A to have nops.
H.J. Lu <hongjiu.lu@intel.com>
* config/obj-coff.h: Include "coff/x86_64.h" for x86 pe-coff.
(TARGET_FORMAT): Removed for x86 pe-coff.
(COFF_TARGET_FORMAT): Likewise.
* config/tc-i386.c (md_longopts): Allow --64 for x86 pe-coff.
(md_parse_option): Likewise.
(md_show_usage): Show option --32/--64 for x86 pe-coff.
(i386_target_format): Use also for x86 pe-coff.
* config/tc-i386.h (TARGET_FORMAT): Defined as i386_target_format
for x86 pe-coff.
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* cofflink.c (process_embedded_commands): Ignore "-aligncomm".
==> gas/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* NEWS: Mention new feature.
* config/obj-coff.c (obj_coff_common_parse): New function.
(obj_coff_comm): Likewise.
(coff_pseudo_table): Override default ".comm" definition on PE.
* doc/as.texinfo: Document new feature.
==> gas/testsuite/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* gas/pe/: New directory for PE format-specific tests.
* gas/pe/aligncomm-a.d: New test pattern file.
* gas/pe/aligncomm-a.s: New test source file.
* gas/pe/aligncomm-b.d: New test pattern file.
* gas/pe/aligncomm-b.s: New test source file.
* gas/pe/aligncomm-c.d: New test pattern file.
* gas/pe/aligncomm-c.s: New test source file.
* gas/pe/aligncomm-d.d: New test pattern file.
* gas/pe/aligncomm-d.s: New test source file.
* gas/pe/pe.exp: New test control script.
* lib/gas-defs.exp (is_pecoff_format): New function.
==> ld/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* NEWS: Mention new feature.
* deffile.h (def_file_aligncomm): Add new struct definition.
(def_file): Add new def_file_aligncomm member.
* deffilep.y (%token): Add new ALIGNCOMM token.
(command): Add production rule for ALIGNCOMM.
(def_file_free): Free any chained def_file_aligncomm structs.
(diropts[]): Add entry for '-aligncomm' .drectve command.
(def_aligncomm): New grammar function.
* ld.texinfo: Document new feature.
* pe-dll.c (process_def_file): Rename from this ...
(process_def_file_and_drectve): ... to this, updating all callers,
and process any aligncomms chained to the def file after scanning
all .drectve sections.
(generate_edata): Updated to match.
(pe_dll_build_sections): Likewise.
==> ld/testsuite/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* ld-pe/aligncomm-1.c: New test source file.
* ld-pe/aligncomm-2.c: Likewise.
* ld-pe/aligncomm-3.c: Likewise.
* ld-pe/aligncomm-4.c: Likewise.
* ld-pe/aligncomm.d: New test pattern file.
* ld-pe/direct.exp: Deleted, and content moved into ...
* ld-pe/pe-run.exp: ... New common file for all PE run tests.
* ld-pe/vers-script.exp: Deleted, and content merged into ...
* ld-pe/pe-compile.exp: ... New common file for PE tests needing
a compiler, adding aligned common tests.
* ld-pe/pe.exp: Update header comment.
* config/obj-coff.c (obj_coff_section): Add 'y' as
specifier for SEC_COFF_NOREAD section flag.
* doc/as.texinfo: Add documentation about .section flag 'y'.
* config/tc-armeabi.h (FPU_DEFAULT): Likewise.
* config/tc-arm.c (md_begin): If FPU_DEFAULT is set, don't infer
the default FPU from the processor.
testsuite/
* gas/arm/attr-mcpu.d: Add -mfpu=neon.
* gas/arm/mapmisc.d: Correct expected output for .double and
.dcb.d.
* config/tc-arm.c (do_t_blx): Always use BFD_RELOC_THUMB_PCREL_BLX.
(md_pcrel_from_section): Align address for BLX.
(tc_gen_reloc): Change BFD_RELOC_THUMB_PCREL_BLX relocations to
BFD_RELOC_THUMB_PCREL_BRANCH23 for EABI v4+.
2009-04-30 Nick Clifton <nickc@redhat.com>
* common.h (STT_GNU_IFUNC): Define.
elfcpp
2009-04-30 Nick Clifton <nickc@redhat.com>
* (enum STT): Add STT_GNU_IFUNC.
gas
2009-04-30 Nick Clifton <nickc@redhat.com>
* config/obj-elf.c (obj_elf_type): Add support for a
gnu_indirect_function type.
* config/tc-i386.c (tc_i386_fix_adjustable): Do not adjust fixups
against indirect function symbols.
* doc/as.texinfo (.type): Document the support for the
gnu_indirect_function symbol type.
* NEWS: Mention the new feature.
gas/testsuite
2009-04-30 Nick Clifton <nickc@redhat.com>
* gas/elf/elf.exp: Extend type test to include an ifunc symbol.
Provide an alternative test for targets which do not support ifunc
symbols.
(type.s): Add entry for an ifunc symbol.
(type.e): Add ifunc entry to expected symbol dump.
(section2.e-armelf): Add entry for ifunc symbol.
(type-noifunc.s): New file.
(type-noifunc.e): New file.
bfd/
2009-04-30 Nick Clifton <nickc@redhat.com>
* elf-bfd.h (struct bfd_elf_section_data): Add indirect_relocs
section pointer.
(struct elf_obj_data): Add has_ifunc_symbols boolean.
* elf.c (swap_out_syms): Convert BSF_GNU_INDIRECT_FUNCTION flags
into a STT_GNU_IFUNC symbol type.
(_bfd_elf_is_function_type): Accept STT_GNU_IFUNC as a function
type.
(_bfd_elf_set_osabi): Set the osasbi field to ELFOSABI_LINUX if
the binary contains ifunc symbols.
* elfcode.h (elf_slurp_symbol_table): Translate the STT_GNU_IFUNC
symbol type into a BSF_GNU_INDIRECT_FUNCTION flag.
* elf32-i386.c (is_indirect_function): New function.
(elf_i386_check_relocs): Create an ifunc output section.
(allocate_dynrelocs): Create dynamic relocs in the ifunc output
section if necessary.
(elf_i386_relocate_section): Emit a reloc against an ifunc symbol
if necessary.
(elf_i386_add_symbol_hook): New function. Set the
has_ifunc_symbols field of the elf_obj_data structure if an ifunc
symbol is encountered.
(elf_backend_post_process_headers): Define.
(elf_backend_add_symbol_hook): Define.
(elf_i386_post_process_headers): Rename to
elf_i388_fbsd_post_process_headers.
* elf64-x86_64.c (IS_X86_64_PCREL_TYPE): New macro.
(is_indirect_function): New function.
(elf64_x86_64_check_relocs): Create an ifunc output section.
(allocate_dynrelocs): Create dynamic relocs in the ifunc output
section if necessary.
(elf64_x86_64_relocate_section): Emit a reloc against an ifunc
symbol if necessary.
(elf_i386_add_symbol_hook): Set the has_ifunc_symbols field of the
elf_obj_data structure if an ifunc symbol is encountered.
(elf_backend_post_process_headers): Define.
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Always create a PLT
if we have ifunc symbols to handle.
(get_ifunc_reloc_section_name): New function. Computes the name
for an ifunc section.
(_bfd_elf_make_ifunc_reloc_section): New function. Creates a
section to hold ifunc relocs.
* syms.c (BSF_GNU_INDIRECT_FUNCTION): Define.
(bfd_print_symbol_vandf): Handle ifunc symbols.
(bfd_decode_symclass): Likewise.
* bfd-in2.h: Regenerate.
binutils
2009-04-30 Nick Clifton <nickc@redhat.com>
* readelf.c (dump_relocations): Display a relocation against an
ifunc symbol as if it were a function invocation.
(get_symbol_type): Handle STT_GNU_IFUNC.
ld
2009-04-30 Nick Clifton <nickc@redhat.com>
* NEWS: Mention support for IFUNC symbols.
ld/testsuite
2009-04-30 Nick Clifton <nickc@redhat.com>
* ld-ifunc: New directory.
* ld-ifunc/ifunc.exp: New file: Run the IFUNC tests.
* ld-ifunc/prog.c: New file.
* ld-ifunc/lib.c: New file.
2009-04-15 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (process_operands): Print operands in
correct order depending on intel_syntax.
gas/testsuite/
2009-04-15 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.e: Adjust expectations.
* config/tc-vax.c (synthetic_votstrs): add "jbbcci" and "jbbssi"
(md_assemble): emit symbol name when used as immediate in PIC mode.
(md_assemble): fix LP64 bug (use sizeof (valueT) instead 4).
gas/
* config/tc-arm.c (md_apply_fix): Check BFD_RELOC_ARM_IMMEDIATE and
BFD_RELOC_ARM_ADRL_IMMEDIATE value is in the correct section.
Check BFD_RELOC_ARM_ADRL_IMMEDIATE has a defined symbol.
gas/testsuites/
* gas/arm/adr-invalid.d: New file.
* gas/arm/adr-invalid.l: New file.
* gas/arm/adr-invalid.s: New file.
* internal.h (C_AIX_WEAKEXT): New macro.
(C_WEAKEXT): Use the GNU definition in the generic part of the file,
and conditionally reset it to C_AIX_WEAKEXT in the XCOFF part of
the file.
(CSECT_SYM_P): New macro.
* xcoff.h (L_WEAK): Define.
(EXTERN_SYM_P): New macro.
bfd/
* coffcode.h (coff_pointerize_aux_hook): Update CSECT_SYM_P to
check whether a symbol has csect information.
(coff_print_aux): Likewise.
* coff-rs6000.c (_bfd_xcoff_swap_aux_in): Handle auxillary csect
information for C_AIX_WEAKEXT too.
(_bfd_xcoff_swap_aux_out): Likewise.
(xcoff_reloc_type_br): Handle defweak symbols too.
* coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Handle auxillary csect
information for C_AIX_WEAKEXT too.
(_bfd_xcoff64_swap_aux_out): Likewise.
(xcoff64_reloc_type_br): Handle defweak symbols too.
* coffgen.c (coff_print_symbol): Handle auxillary function
information for C_AIX_WEAKEXT too.
* xcofflink.c (_bfd_xcoff_canonicalize_dynamic_symtab): Set BSF_WEAK
instead of BSF_GLOBAL if the L_WEAK flag is set.
(xcoff_dynamic_definition_p): New function.
(xcoff_link_add_dynamic_symbols): Use it to decide whether ldsym
defines h. Don't change h if ldsym isn't the definition. Otherwise,
always take the symbol class from the ldsym. Use weak bfd symbol
types for weak ldsyms.
(xcoff_link_add_symbols): Use CSECT_SYM_P and EXTERN_SYM_P.
Fix the check for whether a definition is from a shared object.
Allow redefinitions of weak symbols.
(xcoff_link_check_ar_symbols): Use EXTERN_SYM_P.
(xcoff_keep_symbol_p): Likewise.
(bfd_xcoff_size_dynamic_sections): Use CSECT_SYM_P.
(xcoff_link_input_bfd): Use CSECT_SYM_P and EXTERN_SYM_P.
Add .loader entries for C_AIX_WEAKEXT as well as C_EXT symbols,
but mark them as L_WEAK.
(xcoff_write_global_symbol): Treat weak symbols as C_AIX_WEAKEXT
instead of C_EXT if C_AIX_WEAKEXT == C_WEAKEXT.
gas/
* config/tc-ppc.c (ppc_frob_symbol): Add csect information for
C_AIX_WEAKEXT too.
ld/testsuite/
* ld-powerpc/aix-glink-2a.s, ld-powerpc/aix-glink-2a.ex,
ld-powerpc/aix-glink-2b.s, ld-powerpc/aix-glink-2c.s,
ld-powerpc/aix-glink-2c.ex, ld-powerpc/aix-glink-2d.s,
ld-powerpc/aix-glink-2-32.dd, ld-powerpc/aix-glink-2-64.dd,
ld-powerpc/aix-weak-1a.s, ld-powerpc/aix-weak-1b.s,
ld-powerpc/aix-weak-1-rel.hd, ld-powerpc/aix-weak-1-rel.nd,
ld-powerpc/aix-weak-1-dso.hd, ld-powerpc/aix-weak-1-dso.nd,
ld-powerpc/aix-weak-1-dso.dnd, ld-powerpc/aix-weak-1.ex,
ld-powerpc/aix-weak-2a.s, ld-powerpc/aix-weak-2a.ex,
ld-powerpc/aix-weak-2a.nd, ld-powerpc/aix-weak-2b.s,
ld-powerpc/aix-weak-2b.nd, ld-powerpc/aix-weak-2c.s,
ld-powerpc/aix-weak-2c.ex, ld-powerpc/aix-weak-2c.nd,
ld-powerpc/aix-weak-2c.od, ld-powerpc/aix-weak-3a.s,
ld-powerpc/aix-weak-3a.ex, ld-powerpc/aix-weak-3b.s,
ld-powerpc/aix-weak-3b.ex, ld-powerpc/aix-weak-3-32.d,
ld-powerpc/aix-weak-3-32.dd, ld-powerpc/aix-weak-3-64.d,
ld-powerpc/aix-weak-3-64.dd: New tests.
* ld-powerpc/aix52.exp: Run them. Replace tmp/aix-* with
tmp/aix64-* in 64-bit ld options.
