* config/tc-i386.h: Change Data16 to Size16, Data32 to Size32,
IgnoreDataSize to IgnoreSize as they are used for address size as
well as data size.
* config/tc-i386.c: Likewise. Add code to reject addr32/data32 in
32-bit mode, similarly addr16/data16 and variants.
* i386.h: Change occurences of Data16 to Size16, Data32 to Size32,
IgnoreDataSize to IgnoreSize. Flag address and data size prefixes
with Size16|IgnoreSize or Size32|IgnoreSize.
using sim-options.
start-sanitize-am30
* (board): Add --board option for specifying am32.
* (sim_open): Create new timer and serial devices and control
configuration of other am32 devices via board option.
end-sanitize-am30
* config/tc-i386.c: REPNE renamed to REPNE_PREFIX_OPCODE, and
likewise for REPE.
* config/tc-i386.c (reloc): Add braces.
* config/tc-i386.c (struct _i386_insn): Rename bi to sib to be
consistent with Intel naming.
* config/tc-i386.h (base_index_byte): Rename to sib_byte. Don't
use bitfields in sib_byte.
(modrm_byte): Don't use bitfields here either.
* config/tc-i386.c (current_templates): Add const.
(parse_register): Add const to return, param, and char *s.
(i386_operand): Add const to reg_entry *r.
* config/tc-i386.h (templates): Add const to start, end.
Inspired by code for 16 bit gas support from Martynas Kunigelis
<martynas@nm3.ktu.lt>:
* config/tc-i386.c (md_assemble): Add full support for 16 bit
modrm, and Jump, JumpByte, JumpDword, JumpInterSegment insns.
(uses_mem_addrmode): Remove.
(md_estimate_size_before_relax): Add support here too.
(md_relax_table): Rewrite interface to md_relax for 16 bit
support.
(BYTE, WORD, DWORD, UNKNOWN_SIZE): Remove.
(opcode_suffix_to_type): Remove.
(CODE16, SMALL, SMALL16, BIG, BIG16): Define.
(SIZE_FROM_RELAX_STATE): Modify to suit above.
(md_convert_frag): Likewise.
(i386_operand): Add support for 16 bit base/index regs,
immediates, and displacements. Remove some unnecessary casts, and
localise end_of_operand_string, displacement_string_start,
displacement_string_end variables. Add GCC_ASM_O_HACK.
* config/tc-i386.h (NO_BASE_REGISTER_16): Define.
* config/tc-i386.c (prefix_hash): Remove.
(md_begin): Rewrite without obstacks. Remove prefix hash table
handling. Rewrite lexical table handling.
(i386_print_statistics): Don't print prefix statistics.
(md_assemble): Rewrite instruction parser so that line is not
converted to lower case. Don't do a hash_find for prefixes,
instead recognise them via opcode modifier.
(expecting_operand, paren_not_balanced): Localise variables.
* config/tc-i386.h (IsPrefix): Define.
(prefix_entry): Remove.
* config/tc-i386.h (PREFIX_SEPERATOR): Don't define.
* config/tc-i386.c (PREFIX_SEPARATOR): Define here instead, using
'\\' in case where comment_chars contains '/'.
* config/tc-i386.c (MATCH): Ensure given operand and template
match for JumpAbsolute. Makes e.g. `ljmp table(%ebx)' invalid;
you must write `ljmp *table(%ebx)'.
From H.J. Lu <hjl@gnu.org>:
* config/tc-i386.c (BFD_RELOC_16, BFD_RELOC_16_PCREL): Define
as 0 ifndef BFD_ASSEMBLER.
(md_assemble): Allow immediate operands without suffix or
other reg operand to default in size to the current code size.
* i386.h (REPNE): Rename to REPNE_PREFIX_OPCODE.
(REPE): Rename to REPE_PREFIX_OPCODE.
(i386_regtab_end): Remove.
(i386_prefixtab, i386_prefixtab_end): Remove.
(i386_optab): Use NULL as sentinel rather than "" to suit rewrite
of md_begin.
(MAX_OPCODE_SIZE): Define.
(i386_optab_end): Remove.
(sl_Suf): Define.
(sl_FP): Use sl_Suf.
* i386.h (i386_optab): Allow 16 bit displacement for `mov
mem,acc'. Combine 16 and 32 bit forms of various insns. Allow 16
bit form of ljmp. Add IsPrefix modifier to prefixes. Add addr32,
data32, dword, and adword prefixes.
(i386_regtab): Add BaseIndex modifier to valid 16 bit base/index
regs.
* i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
functions to void.
(OP_DSreg): Rename from OP_DSSI.
(OP_ESreg): Rename from OP_ESDI.
(Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
(DSBX): Define.
(append_seg): Rename from append_prefix.
(ptr_reg): New function.
(dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
Add DSBX for xlat.
(PREFIX_ADDR): Rename from PREFIX_ADR.
(float_reg): Add non-broken opcodes for people who don't want
UNIXWARE_COMPAT.
* i386.h (i386_regtab): Remove BaseIndex modifier from esp.
* i386.h: Allow `l' suffix on fld, fst, fstp, fcom, fcomp with
register operands, because this is a common idiom. Flag them with
a warning. Allow illegal faddp, fsubp, fsubrp, fmulp, fdivp,
fdivrp because gcc erroneously generates them. Also flag with a
warning.
* i386.h: Add suffix modifiers to most insns, and tighter operand
checks in some cases. Fix a number of UnixWare compatibility
issues with float insns. Merge some floating point opcodes, using
new FloatMF modifier.
(WORD_PREFIX_OPCODE): Rename to DATA_PREFIX_OPCODE for
consistency.
* i386.h: Change occurence of ShortformW to W|ShortForm. Add
IgnoreDataSize where appropriate.
* config/tc-i386.c (mode_from_disp_size): Disp16 is mode 2.
(i386_operand): Simplify checks for valid base/index combinations.
Disallow `in 4(%dx),%al'.
* config/tc-i386.c (struct _i386_insn): Make regs, base_reg, and
index_reg const.
(add_prefix): Change parameter from char to int.
* config/tc-i386.h (Ugh): Define opcode modifier.
* config/tc-i386.c (md_assemble): Print warnings for Ugh insns.
* config/tc-i386.c (md_assemble): Rewrite MATCH and
CONSISTENT_REGISTER_MATCH macros to check register types more
thoroughly. Check for illegal suffix/operand combinations
when matching insns with operands. Handle new `s' suffix, and
associated FloatMF opcode modifier for float insns with memory
operands.
* config/tc-i386.h (FloatMF): Define new opcode modifier.
(No_sSuf, No_bSuf, No_wSuf, No_lSuf): Likewise.
(SHORT_OPCODE_SUFFIX, LONG_OPCODE_SUFFIX): Define.
* config/tc-i386.c: Rename WORD_PREFIX_OPCODE to
DATA_PREFIX_OPCODE throughout.
* config/tc-i386.c (REGISTER_WARNINGS): Define.
(md_assemble): Rewrite suffix/register operand checking code to be
more thorough. Remove Abs8,16,32. Change occurrences of Mem to
AnyMem, the better to grep.
(pi): Remove Abs.
(i386_operand): Don't set Mem bits in i.types[this_operand] when
given a memory operand. Don't set Abs bits either.
(type_names): Remove Mem*, Abs*.
* config/tc-i386.h (Mem8, Mem16, Mem32, Abs8, Abs16, Abs32): Don't
define opcode_modifiers as these cases are handled by Disp8,
Disp16, Disp32 and suffix checks.
(COMES_IN_BOTH_DIRECTIONS): Remove.
(FloatR): Define. It's OK to share the bit with ReverseRegRegmem.
* config/tc-i386.c (md_assemble): Don't emit operand size prefix
if IgnoreDataSize modifier given. Remove ShortformW modifier
test. Add test for ShortForm in W base_opcode modification.
Merge Seg2ShortForm and Seg3ShortForm code.
* config/tc-i386.h (ShortFormW): Remove.
(IgnoreDataSize): Define.
* gas/m68k/operands.s: For all pc relative addresses change tstl
to pea since the former does not allow pcrel on m68000. Do not
make label foo global, so that references to it can be relaxed on
ELF targets.
* gas/m68k/operands.d, gas/m68k/op68000.d: Updated.
