* lexsup.c: Add --print-gc-sections and --no-print-gc-sections switches.
* ld.texinfo: Document new switches.
* NEWS: Mention new switches.
* bfdlink.h (struct bfd_link_info): New field: print_gc_sections.
* elflink.c (elf_gc_sweep): If info.print_gc_sections is true, list removed sections to stderr.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops and x86-64-nops.
* gas/i386/nops.d: New file.
* gas/i386/nops.s: Likewise.
* gas/i386/x86-64-nops.d: Likewise.
* gas/i386/x86-64-nops.s: Likewise.
include/opcode/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Add "nop" with memory reference.
opcodes/
2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
(twobyte_has_modrm): Set 1 for 0x1f.
* config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
appropriate.
(mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
(mips_ip): Make overflowed/underflowed constant arguments in DSP
and MT instructions a fatal error. Use INSERT_OPERAND where
appropriate. Improve warnings for break and wait code overflows.
Use symbolic constant of OP_MASK_COPZ.
(mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dsp.d, gas/mips/mips32-dsp.s, gas/mips/mips32-mt.d,
gas/mips/mips32-mt.s: Remove instructions with invalid arguments.
* gas/mips/mips32-dsp.l, gas/mips/mips32-mt.l: Delete file.
[ include/opcode/ChangeLog ]
* mips.h: Improve description of MT flags.
* elf.c (assign_file_positions_for_load_sections): Retrieve
maxpagesize from m->p_align if it is valid. Set p_vaddr,
p_paddr and p_align earlier. Revert 2006-05-19 change to p_align.
(copy_elf_program_header): Copy p_align. Set p_align_valid.
include/elf/
* internal.h (elf_segment_map): Add p_align and p_align_valid.
* m68k.h (mcf_mask): Define.
opcodes/
* m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
and fmovem entries. Put register list entries before immediate
mask entries. Use "l" rather than "L" in the fmovem entries.
* m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
out from INFO.
(m68k_scan_mask): New function, split out from...
(print_insn_m68k): ...here. If no architecture has been set,
first try printing an m680x0 instruction, then try a Coldfire one.
gas/testsuite/
* gas/m68k/mcf-fpu.s: Add fmovemd and fmovem instructions.
* gas/m68k/mcf-fpu.d: Adjust accordingly.
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* elfxx-ia64.c (elfNN_ia64_relax_section): Skip unneeded passes
with the skip_relax_pass_0 and skip_relax_pass_1 bits in the
section structure.
include/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* bfdlink.h (bfd_link_info): Replace need_relax_finalize with
relax_pass.
ld/
2006-04-06 H.J. Lu <hongjiu.lu@intel.com>
* emultempl/ia64elf.em: Set link_info.relax_pass to 2. Remove
link_info.need_relax_finalize.
* ldlang.c (relax_sections): New.
(lang_process): Use. Call relax_sections link_info.relax_pass
times.
* ldmain.c (main): Set link_info.relax_pass to 1. Remove
link_info.need_relax_finalize.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_X86_64_GOT64, BFD_RELOC_X86_64_GOTPCREL64,
BFD_RELOC_X86_64_GOTPC64, BFD_RELOC_X86_64_GOTPLT64,
BFD_RELOC_X86_64_PLTOFF64.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf64-x86-64.c (x86_64_elf_howto_table): Correct comment.
Add howtos for above relocs.
(x86_64_reloc_map): Add mappings for new relocs.
(elf64_x86_64_check_relocs): R_X86_64_GOT64, R_X86_64_GOTPCREL64,
R_X86_64_GOTPLT64 need a got entry. R_X86_64_GOTPLT64 also a PLT
entry. R_X86_64_GOTPC64 needs a .got section. R_X86_64_PLTOFF64
needs a PLT entry.
(elf64_x86_64_gc_sweep_hook): Reflect changes from
elf64_x86_64_check_relocs for the new relocs.
(elf64_x86_64_relocate_section): Handle new relocs.
gas/ChangeLog:
* config/tc-i386.c (type_names): Correct placement of 'static'.
(reloc): Map some more relocs to their 64 bit counterpart when
size is 8.
(output_insn): Work around breakage if DEBUG386 is defined.
(output_disp): A BFD_RELOC_64 with GOT_symbol as operand also
needs to be mapped to BFD_RELOC_X86_64_GOTPC64 or
BFD_RELOC_X86_64_GOTPC32. Also x86-64 handles pcrel addressing
different from i386.
(output_imm): Ditto.
(lex_got): Recognize @PLTOFF and @GOTPLT. Make @GOT accept also
Imm64.
(md_convert_frag): Jumps can now be larger than 2GB away, error
out in that case.
(tc_gen_reloc): New relocs are passed through. BFD_RELOC_64
and BFD_RELOC_64_PCREL are mapped to BFD_RELOC_X86_64_GOTPC64.
gas/testsuite/ChangeLog:
* gas/i386/reloc64.s: Accept 64-bit forms.
* gas/i386/reloc64.d: Adjust.
* gas/i386/reloc64.l: Adjust.
include/ChangeLog:
* elf/x86-64.h: Add the new relocations with their official
numbers.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (output_insn): Support Intel Merom New
Instructions.
* gas/config/tc-i386.h (CpuMNI): New.
(CpuUnknownFlags): Add CpuMNI.
gas/testsuite/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add merom and x86-64-merom.
* gas/i386/merom.d: New file.
* gas/i386/merom.s: Likewise.
* gas/i386/x86-64-merom.d: Likewise.
* gas/i386/x86-64-merom.s: Likewise.
include/opcode/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Merom New Instructions.
opcodes/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
Intel Merom New Instructions.
(THREE_BYTE_0): Likewise.
(THREE_BYTE_1): Likewise.
(three_byte_table): Likewise.
(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
THREE_BYTE_1 for entry 0x3a.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(print_insn): Handle 3-byte opcodes used by Intel Merom New
Instructions.
* xtensa-config.h (XCHAL_HAVE_WIDE_BRANCHES): New.
gas:
* config/tc-xtensa.c (op_placement_info_struct): Delete single,
single_size, widest, and widest_size fields. Add narrowest_slot.
(xg_emit_insn_to_buf): Remove fmt parameter and compute it here.
Use xg_get_single_slot to find the slot.
(finish_vinsn): Use emit_single_op instead of bundle_single_op.
(bundle_single_op): Rename this to....
(bundle_tinsn): ...this function, which builds a vliw_insn but does
not call finish_vinsn.
(emit_single_op): Use bundle_tinsn instead of bundle_single_op.
(relax_frag_immed): Get num_slots from cur_vinsn.
(convert_frag_narrow): Update call to xg_emit_insn_to_buf.
(convert_frag_immed): Likewise. Also, get num_slots from cur_vinsn.
(init_op_placement_info_table): Set narrowest_slot field. Remove
code for deleted fields.
(xg_get_single_size): Return narrowest_size field, not single_size.
(xg_get_single_format): Return narrowest field, not single.
(xg_get_single_slot): New.
(tinsn_to_insnbuf): Rewrite to use tinsn_to_slotbuf.
* config/xtensa-relax.c (widen_spec_list): Add wide branch relaxations.
(transition_applies): Check wide branch option availability.
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
* readelf.c (get_mips_symbol_other): New function.
(get_symbol_other): New function.
(process_symbol_table): Call get_symbol_other() to get a description of the
st_other field if it contains more information than just the visibility.
* elfxx-mips.c (mips_elf_calculate_relocation): Ignore an undefined symbol if
it is optional.
(_bfd_mips_elf_merge_symbol_attribute): Make sure that the optional flag is
merged as well as the visibility.
* elfxx-mips.h (_bfd_mips_elf_merge_symbol_attribute): Prototype.
(elf_backend_merge_symbol_attribute): Define.
* mips.h (STO_OPTIONAL): Define.
(ELF_MIPS_IS_OPTIONAL): Define.
Contribute the following changes:
2003-09-29 Dave Brolley <brolley@redhat.com>
* dis-asm.h (disassemble_info): insn_sets now (void *) to allow for
more exotic underlying types to be used.
Contribute the following changes:
2005-02-16 Dave Brolley <brolley@redhat.com>
* cgen-bitset.h: Rename CGEN_ISA_MASK to CGEN_BITSET. Rename
cgen_isa_mask_* to cgen_bitset_*.
* cgen.h: Likewise.
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64.h (enum ia64_opnd): Move memory operand out of set of
indirect operands.
bfd/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* cpu-ia64-opc.c (elf64_ia64_operands): Move memory operand out of
set of indirect operands.
gas/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
(dot_rot): Change type of num_* variables. Check for positive count.
(ia64_optimize_expr): Re-structure.
(md_operand): Check for general register.
gas/testsuite/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* gas/ia64/index.[sl]: New.
* gas/ia64/rotX.[sl]: New.
* gas/ia64/ia64.exp: Run new tests.
opcodes/
2005-10-24 Jan Beulich <jbeulich@novell.com>
* ia64-asmtab.c: Regenerate.
(pa_ip): Promote from PA 1.0 to 1.1 immediately when 1.1 match is
found. Simplify handling of "ma" and "mb" completers.
* hppa.h (FLAG_STRICT): Revise comment.
(pa_opcode): Revise ordering rules. Add/move strict pa10 variants
before corresponding pa11 opcodes. Add strict pa10 register-immediate
entries for "fdc".
* argv.c (safe-ctype.h): Include it.
(ISBLANK): Remove.
(stdio.h): Include.
(buildargv): Use ISSPACE instead of ISBLANK.
(expandargv): New function.
* Makefile.in: Regenerated.
OP_SH_MTACC_T, OP_MASK_MTACC_T, OP_SH_MTACC_D, OP_MASK_MTACC_D): New
define.
Document !, $, *, &, g, +t, +T operand formats for MT instructions.
(INSN_ASE_MASK): Update to include INSN_MT.
(INSN_MT): New define for MT ASE.
2005-07-27 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add comment to movd. Use LongMem for all
movd-s. Add NoRex64 to movq-s dealing only with mmx or xmm registers.
Add movq-s as 64-bit variants of movd-s.
implicit space-register addressing. Set space-register bits on opcodes
using implicit space-register addressing. Add various missing pa20
long-immediate opcodes. Remove various opcodes using implicit 3-bit
space-register addressing. Use "fE" instead of "fe" in various
fstw opcodes.
* readelf.c (read_and_display_attr_value): Handle a DW_AT_encoding
value of DW_ATE_decimal_float instead of DW_ATE_GNU_decimal_float.
include/elf/
* dwarf2.h (enum dwarf_type): Remove DW_AT_GNU_decimal_float.
Replace with DW_ATE_decimal_float (now in DWARF 3).
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
2005-07-05 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.h (CpuSVME): New.
(CpuUnknownFlags): Include CpuSVME.
* config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
as alias of sledgehammer.
(md_assemble): Include invlpga in the check for insns with two source
operands.
(process_operands): Include SVME insns in the check for ignored
segment overrides. Adjust diagnostic.
(i386_index_check): Special-case SVME insns with memory operands.
gas/testsuite/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* gas/i386/svme.d: New.
* gas/i386/svme.s: New.
* gas/i386/svme64.d: New.
* gas/i386/i386.exp: Run new tests.
include/opcode/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add new insns.
opcodes/
2005-07-05 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (SVME_Fixup): New.
(grps): Use it for the lidt entry.
(PNI_Fixup): Call OP_M rather than OP_E.
(INVLPG_Fixup): Likewise.
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* config/tc-i386.c (md_assemble): Don't call optimize_disp on
movabs.
(optimize_disp): Optimize only if possible. Don't use 64bit
displacement on non-constants and do same on constants if
possible.
gas/testsuite/
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* i386/x86_64.s: Add absolute 64bit addressing tests for mov.
* i386/x86_64.s: Updated.
include/opcode/
2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
PR 1013
* i386.h (i386_optab): Update comments for 64bit addressing on
mov. Allow 64bit addressing for mov and movq.
* readelf.c (CHECK_ENTSIZE_VALUES, CHECK_ENTSIZE): Define.
(process_section_headers): Use it.
(process_relocs): Don't crash if symsec is not SHT_SYMTAB
or SHT_DYNSYM.
(process_version_sections): Use sizeof (Elf_External_Versym)
instead of sh_entsize.
2005-06-17 Jan Beulich <jbeulich@novell.com>
* bfd-in2.h (elf_x86_64_reloc_type): Add BFD_RELOC_X86_64_GOTOFF64
and BFD_RELOC_X86_64_GOTPC32.
* libbfd.h (bfd_reloc_code_real_names): Likewise.
* elf64-x86-64.c (x86_64_elf_howto_table): Add entries for
R_X86_64_PC64, R_X86_64_GOTOFF64, and R_X86_64_GOTPC32.
(x86_64_reloc_map): Add entries for R_X86_64_PC64, R_X86_64_GOTOFF64,
and R_X86_64_GOTPC32.
(elf64_x86_64_info_to_howto): Adjust bounding relocation type.
(elf64_x86_64_check_relocs): Also handle R_X86_64_PC64,
R_X86_64_GOTOFF64, and R_X86_64_GOTPC32.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_gc_sweep_hook): Also handle R_X86_64_PC64.
gas/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (reloc): Also handle BFD_RELOC_64_PCREL.
(tc_i386_fix_adjustable): Include BFD_RELOC_X86_64_GOTOFF64,
BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64.
(output_disp): Do GOTPC conversion also for BFD_RELOC_X86_64_32S
and BFD_RELOC_32_PCREL. Use BFD_RELOC_X86_64_GOTPC32 instead of
aborting.
(output_imm): Do GOTPC conversion also for BFD_RELOC_X86_64_32S.
Use BFD_RELOC_X86_64_GOTPC32 instead of aborting.
(tc_gen_reloc): Do GOTPC conversion also for BFD_RELOC_32_PCREL.
Use BFD_RELOC_X86_64_GOTPC32 instead of aborting. Also handle
BFD_RELOC_X86_64_GOTOFF64, BFD_RELOC_X86_64_GOTPC32,
BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64. Also
convert 8-byte pc-relative relocations.
(lex_got): Use BFD_RELOC_X86_64_GOTOFF64 for 64-bit @gotoff.
(i386_validate_fix): Likewise.
(x86_cons): Also handle quad values in 64-bit mode.
(i386_displacement): Also handle BFD_RELOC_X86_64_GOTOFF64.
(md_apply_fix): Include BFD_RELOC_X86_64_DTPOFF64 and
BFD_RELOC_X86_64_TPOFF64 in the TLS check. Also convert BFD_RELOC_64
to pc-relative variant. Also check for BFD_RELOC_64_PCREL.
gas/testsuite/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* gas/i386/x86-64-pcrel.s: Add insn requiring 64-bit pc-relative
relocation. Add insns for all widths of non-pc-relative relocations.
* gas/i386/x86-64-pcrel.d: Adjust.
include/elf/
2005-06-17 Jan Beulich <jbeulich@novell.com>
* x86-64.h (elf_x86_64_reloc_type): Adjust comment for
R_X86_64_GOTPCREL. Add R_X86_64_PC64, R_X86_64_GOTOFF64, and
R_X86_64_GOTPC32.
* arm-opc.h: Delete; fold contents into ...
* arm-dis.c: ... here. Move includes of internal COFF headers
next to includes of internal ELF headers.
(streq, WORD_ADDRESS, BDISP, BDISP23): Delete, unused.
(struct arm_opcode): Rename struct opcode32. Make 'assembler' const.
(struct thumb_opcode): Rename struct opcode16. Make 'assembler' const.
(arm_conditional, arm_fp_const, arm_shift, arm_regname, regnames)
(iwmmxt_wwnames, iwmmxt_wwssnames):
Make const.
(regnames): Remove iWMMXt coprocessor register sets.
(iwmmxt_regnames, iwmmxt_cregnames): New statics.
(get_arm_regnames): Adjust fourth argument to match above changes.
(set_iwmmxt_regnames): Delete.
(print_insn_arm): Constify 'c'. Use ISO syntax for function
pointer calls. Expand sole use of BDISP. Use iwmmxt_regnames
and iwmmxt_cregnames, not set_iwmmxt_regnames.
(print_insn_thumb16, print_insn_thumb32): Constify 'c'. Use
ISO syntax for function pointer calls.
include:
* dis-asm.h (get_arm_regnames): Update prototype.
(pa_opcodes): Update load and store entries to allow both PA 1.X and
PA 2.0 mneumonics when equivalent. Entries with cache control
completers now require PA 1.1. Adjust whitespace.
* readelf.c (read_and_display_attr_value): Handle a DW_AT_encoding
value of DW_ATE_GNU_decimal_float.
include/elf/ChangeLog
* dwarf2.h (enum dwarf_type): Assign DW_ATE_GNU_decimal_float from
the user-defined encoding space pending inclusion in the standard.
* arm.h: Import complete list of official relocation names
and numbers from AAELF. Define FAKE_RELOCs for old names.
Remove a few old names no longer used anywhere.
bfd:
* elf32-arm.c: Wherever possible, use official reloc names
from AAELF.
(elf32_arm_howto_table, elf32_arm_tls_gd32_howto)
(elf32_arm_tls_ldo32_howto, elf32_arm_tls_ldm32_howto)
(elf32_arm_tls_le32_howto, elf32_arm_tls_ie32_howto)
(elf32_arm_vtinherit_howto, elf32_arm_vtentry_howto)
(elf32_arm_pc11_howto, elf32_arm_thm_pc9_howto, elf32_arm_got_prel)
(elf32_arm_r_howto): Replace with elf32_arm_howto_table_1,
elf32_arm_howto_table_2, and elf32_arm_howto_table_3.
Add many new relocations from AAELF.
(elf32_arm_howto_from_type): Update to match.
(elf32_arm_reloc_map): Add entries for R_ARM_THM_JUMP24,
R_ARM_THM_JUMP11, R_ARM_THM_JUMP19, R_ARM_THM_JUMP8,
R_ARM_THM_JUMP6, R_ARM_GNU_VTINHERIT, and R_ARM_GNU_VTENTRY.
(elf32_arm_reloc_type_lookup): Use elf32_arm_howto_from_type.
(elf32_arm_final_link_relocate): Add support for
R_ARM_THM_JUMP24, R_ARM_THM_JUMP19, R_ARM_THM_JUMP6. Remove
case entries redundant with default.
* reloc.c: Reorganize ARM relocations. Add Thumb
assembler-internal relocations BFD_RELOC_ARM_T32_OFFSET_U8,
BFD_RELOC_ARM_T32_OFFSET_IMM, BFD_RELOC_ARM_T32_IMMEDIATE.
Add visible relocations BFD_RELOC_THUMB_PCREL_BRANCH7,
BFD_RELOC_THUMB_BRANCH20, BFD_RELOC_THUMB_BRANCH25.
Delete unused relocations BFD_RELOC_ARM_GOT12, BFD_RELOC_ARM_COPY.
* bfd-in2.h, libbfd.h: Regenerate.
opcodes:
* arm-dis.c (thumb_opcodes): Add disassembly for V6T2 16-bit
instructions. Adjust disassembly of some opcodes to match
unified syntax.
(thumb32_opcodes): New table.
(print_insn_thumb): Rename print_insn_thumb16; don't handle
two-halfword branches here.
(print_insn_thumb32): New function.
(print_insn): Choose among print_insn_arm, print_insn_thumb16,
and print_insn_thumb32. Be consistent about order of
halfwords when printing 32-bit instructions.
gas:
* hash.c (hash_lookup): Add len parameter. All callers changed.
(hash_find_n): New interface.
* hash.h: Prototype hash_find_n.
* sb.c: Include as.h.
(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
(sb_scrub_and_add_sb): New interface.
* sb.h: Prototype sb_scrub_and_add_sb.
* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
reference to BFD_RELOC_ARM_GOT12 which is never generated.
* config/tc-arm.c: Rewrite, adding Thumb-2 support.
gas/testsuite:
* gas/arm/arm.exp: Convert all existing "gas_test" tests to
"run_dump_test" tests. Run more tests unconditionally. Run new tests.
* gas/arm/arch4t.s, gas/arm/arch6zk.s, gas/arm/arm3.s, gas/arm/arm6.s
* gas/arm/arm7dm.s, gas/arm/bignum1.s, gas/arm/float.s
* gas/arm/immed.s, gas/arm/iwmmxt.s, gas/arm/offset.s, gas/arm/thumb.s:
Adjust to work as a dump test.
* gas/arm/arch4t.d, gas/arm/arch6zk.d, gas/arm/arm3.d, gas/arm/arm6.d
* gas/arm/arm7dm.d, gas/arm/bignum1.d, gas/arm/float.d
* gas/arm/immed.d, gas/arm/iwmmxt.d, gas/arm/offset.d, gas/arm/thumb.d:
New files.
* gas/arm/armv1-bad.l, gas/arm/armv1-bad.s: Remove tests for
diagnostics that don't happen in the first pass anymore.
* gas/arm/iwmmxt-bad.l, gas/arm/r15-bad.l, gas/arm/req.l
* gas/arm/vfp-bad.l:
Update expected diagnostics.
* gas/arm/pic.d: Update expected reloc name.
* gas/arm/thumbv6.d: CPY no longer appears in disassembly.
* gas/arm/r15-bad.s: Avoid two-argument mul.
* gas/arm/req.s: Adjust comments.
* gas/arm/maverick.d, gas/arm/maverick.s: Avoid inappropriate
use of PC.
* gas/arm/macro-1.d, gas/arm/macro1.s
* gas/arm/t16-bad.l, gas/arm/t16-bad.s
* gas/arm/tcompat.d, gas/arm/tcompat.s
* gas/arm/tcompat2.d, gas/arm/tcompat2.s
* gas/arm/thumb32.d, gas/arm/thumb32.s
New test pair.
ld/testsuite:
* ld-arm/mixed-app.d: Adjust expected disassembly a little.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Disallow use of prefix separator
and comma in Intel mode.
include/opcode/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add ht and hnt.
* config/tc-i386.c (md_begin): Allow hyphens in mnemonics.
include/opcode/ChangeLog:
* i386.h: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr. Provide aliases without hyphens.
opcodes/ChangeLog:
* i386-dis.c: Insert hyphens into selected VIA PadLock extensions.
Add xcrypt-ctr.
* i386.h (i386_optab): Mark VIA PadLock instructions as ImmExt and
adjust them accordingly.
gas/ChangeLog:
* config/tc-i386.c (output_insn): Handle VIA PadLock instructions
similar to other instructions now that they're marked as ImmExt.
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run segment and inval-seg for i386. Run
x86-64-segment and x86-64-inval-seg for x86-64.
* gas/i386/intel.d: Expect movw for moving between memory and
segment register.
* gas/i386/naked.d: Likewise.
* gas/i386/opcode.d: Likewise.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/opcode.s: Use movw for moving between memory and
segment register.
* gas/i386/x86-64-opcode.s: Likewise.
* : Likewise.
* gas/i386/inval-seg.l: New.
* gas/i386/inval-seg.s: New.
* gas/i386/segment.l: New.
* gas/i386/segment.s: New.
* gas/i386/x86-64-inval-seg.l: New.
* gas/i386/x86-64-inval-seg.s: New.
* gas/i386/x86-64-segment.l: New.
* gas/i386/x86-64-segment.s: New.
include/opcode/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Don't allow the `l' suffix for moving
moving between memory and segment register. Allow movq for
moving between general-purpose register and segment register.
opcodes/
2005-03-29 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (SEG_Fixup): New.
(Sv): New.
(dis386): Use "Sv" for 0x8c and 0x8e.
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rel.
* elf64-mips.c (mips16_elf64_howto_table_rel): New array for
MIPS16 REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16
relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into mips16_elf64_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_elf64_howto_table_rela): New array for MIPS16 RELA
reloc howtos. Add R_MIPS16_26, R_MIPS16_GPREL, R_MIPS16_HI16 and
R_MIPS16_LO16 relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16
placeholders.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf64_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf64_rtype_to_howto): Fetch MIPS16 howtos from
mips16_elf64_howto_table_rela or mips16_elf64_howto_table_rel.
* elfn32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf_n32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rela or elf_mips16_howto_table_rel.
* elfxx-mips.c (_bfd_mips16_elf_reloc_unshuffle): New function to
handle bit shuffling for MIPS16 relocs.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Use _bfd_mips16_elf_reloc_unshuffle()
and _bfd_mips16_elf_reloc_shuffle().
(_bfd_mips_elf_generic_reloc): Likewise.
(mips_elf_calculate_relocation): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
(mips_elf_obtain_contents): Remove bit shuffling.
(mips_elf_perform_relocation): Likewise; call
_bfd_mips16_elf_reloc_unshuffle() and _bfd_mips16_elf_reloc_shuffle()
instead.
(_bfd_mips_elf_relocate_section): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
* elfxx-mips.h (_bfd_mips16_elf_reloc_unshuffle): Declare.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
* reloc.c (BFD_RELOC_MIPS16_HI16): New reloc.
(BFD_RELOC_MIPS16_HI16_S): Likewise.
(BFD_RELOC_MIPS16_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (reloc_needs_lo_p): Handle
BFD_RELOC_MIPS16_HI16_S.
(fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
(append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
complaints on.
(mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
Call my_getSmallExpression() to parse percent operators.
(percent_op_match, mips_percent_op): Separate definitions.
(mips16_percent_op): Define percent operators for the MIPS16 mode.
(parse_relocation): Handle the MIPS16 mode using
mips16_percent_op.
(md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.
gas/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* gas/mips/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* gas/mips/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* gas/mips/mips16-hilo.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
include/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf/mips.h (R_MIPS16_GOT16): New reloc code.
(R_MIPS16_CALL16): Likewise.
(R_MIPS16_HI16): Likewise.
(R_MIPS16_LO16): Likewise.
(R_MIPS16_min): New fake reloc code.
(R_MIPS16_max): Likewise.
ld/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* ld-mips-elf/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* ld-mips-elf/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* ld-mips-elf/mips16-hilo.s: Auxiliary source for the new tests.
* ld-mips-elf/mips-elf.exp: Run the new tests.
2005-02-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/intelok.s: Remove comments disabling alternative forms of
fbld, fbstp, and fldcw.
* gas/i386/intelok.d: Expect two instances of fbld, fbstp, and fldcw.
include/opcode/
2005-02-09 Jan Beulich <jbeulich@novell.com>
PR gas/707
* i386.h (i386_optab): Add x_Suf to fbld and fbstp. Add w_Suf and
FloatMF to fldcw, fstcw, fnstcw, and the memory formas of fstsw and
fnstsw.
* bfdlink.h (struct bfd_link_hash_entry): Add u.undef.weak.
bfd/
* linker.c (_bfd_generic_link_add_one_symbol): Set u.undef.weak.
* elflink.c (elf_smash_syms): Restore symbols that were undefweak
before the as-needed lib was loaded. Abort on unexpected refs.
* mips.h (struct mips_opcode): Add new pinfo2 member.
(INSN_ALIAS): New define for opcode table entries that are
specific instances of another entry, such as 'move' for an 'or'
with a zero operand.
(INSN_READ_MDMX_ACC): Redefine from 0 to 0x2.
(INSN_WRITE_MDMX_ACC): Redefine from 0 to 0x4.
* configure.in: Don't define SKIP_ZEROES.
* configure: Regenerate.
* objdump.c (disassemble_data): Set skip_zeroes and
skip_zeroes_at_end in disasm_info to defaults.
(DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
(DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
always define.
(disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
objdump_disasm_info.
include/:
* dis-asm.h (struct disassemble_info): Add skip_zeroes and
skip_zeroes_at_end.
opcodes/:
* disassemble.c (disassemble_init_for_target) <case
bfd_arch_ia64>: Set skip_zeroes to 16.
<case bfd_arch_tic4x>: Set skip_zeroes to 32.
* v850.h (R_V850_LO16_SPLIT_OFFSET): New reloc.
bfd/
* reloc.c (BFD_RELOC_V850_LO16_SPLIT_OFFSET): New bfd_reloc_code_type.
* elf32-v850.c (v850_elf_howto_table): Add entry for
R_V850_LO16_SPLIT_OFFSET.
(v850_elf_reloc_map): Map it to BFD_RELOC_V850_LO16_SPLIT_OFFSET.
(v850_elf_perform_lo16_relocation): New function, extracted from...
(v850_elf_perform_relocation): ...here. Use it to handle
R_V850_LO16_SPLIT_OFFSET.
(v850_elf_check_relocs, v850_elf_final_link_relocate): Handle
R_V850_LO16_SPLIT_OFFSET.
* libbfd.h, bfd-in2.h: Regenerate.
gas/
* config/tc-v850.c (handle_lo16): New function.
(v850_reloc_prefix): Use it to check lo().
(md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.
gas/testsuite/
* gas/v850/split-lo16.{s,d}: New test.
* gas/v850/v850.exp: Run it.
ld/testsuite/
* ld-v850: New directory.
