Since test artifacts are organized in a directory hierarchy, the
s390-multiarch test case is not executed correctly any more. This is
because it uses an obsolete way of constructing the output paths.
This fix invokes standard_testfile instead.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-multiarch.exp: Use standard_testfile instead of
maintaining separate logic for constructing the output path.
The function record_linux_system_call() often records a memory area
whose address is contained in a register. So far this required two
function calls: one for fetching the register value, and another one for
recording the memory area. These two function calls are now merged into
a new local helper function, and all occurrences are adjusted. This
reduces the source code and makes it more readable.
gdb/ChangeLog:
* linux-record.c (record_mem_at_reg): New helper function.
(record_linux_system_call): Exploit new helper function where
applicable.
This patch added handling for some syscalls to linux-record.c:
https://sourceware.org/ml/gdb-patches/2015-10/msg00452.html
But for both `pipe' and `pipe2' the patch lacks a statement after an
`if', such that the following `break' is interpreted as the `if'-body
instead.
This adds the missing (return-) statements for the conditionals.
gdb/ChangeLog:
* linux-record.c (record_linux_system_call): Add missing return
statements to handling of pipe and pipe2 syscalls.
This patch addresses "fork:Interrupted system call" (or wait:) failures
in gdb.threads/forking-threads-plus-breakpoint.exp.
The test program spawns ten threads, each of which do ten fork/waitpid
sequences. The cause of the problem was that when one of the fork
children exited before the corresponding fork parent could initiate its
waitpid for that child, a SIGCHLD and/or SIGSTOP was delivered and
interrupted a fork or waitpid in another thread.
The fix was to wrap the system calls in a loop to retry the call if
it was interrupted, like:
do
{
pid = fork ();
}
while (pid == -1 && errno == EINTR);
Since this is a Linux-only test I figure it is OK to use errno and EINTR.
I tried a number of alternative fixes using SIG_IGN, SA_RESTART,
pthread_sigblock, and bsd_signal, but none of these worked as well.
Tested on Nios II Linux target with x86 Linux host.
gdb/testsuite/ChangeLog:
2016-03-16 Don Breazeal <donb@codesourcery.com>
* gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
Retry fork and waitpid on interrupted system call errors.
* gdb.threads/forking-threads-plus-breakpoint.exp: (do_test):
Use with_timeout_factor to increase timeout to 90.
gas/
* config/tc-arm.c (N_S_32): New.
(N_F_16_32): Likewise.
(N_SUF_32): Support N_F16.
(N_IF_32): Likewise.
(neon_dyadic_misc): Likewise.
(do_neon_cmp): Likewise.
(do_neon_cmp_inv): Likewise.
(do_neon_mul): Likewise.
(do_neon_fcmp_absolute): Likewise.
(do_neon_step): Likewise.
(do_neon_abs_neg): Likewise.
(CVT_FLAVOR_VAR): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_recip_est): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(neon_check_type): Check architecture support for FP16 extension.
(insns): Update comments.
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
error file.
opcode/
* arm-dis.c (neon_opcodes): Support new FP16 instructions.
Arguments are passed in r0-r6 on arm linux syscall (both EABI and OABI).
This patch is to set arm_linux_record_tdep.arg{1-7} to the right
register number.
This patch fixes the following test failures...
-FAIL: gdb.reverse/getresuid-reverse.exp: check ruid record
-FAIL: gdb.reverse/getresuid-reverse.exp: check rgid record
-FAIL: gdb.reverse/pipe-reverse.exp: check pipe record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/waitpid-reverse.exp: check waitpid record
gdb:
2016-03-16 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_init_abi): Fix
arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
arm_linux_record_tdep.arg3. Set arm_linux_record_tdep.arg4,
arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
arm_linux_record_tdep.arg7.
* read.c (emit_expr_with_reloc): Add code check a bignum with
nbytes == 1.
* config/rx/rx-parse.y (rx_intop): Accept bignum values for sizes
other than 32-bits.
* testsuite/gas/elf/bignum.s: New test source file.
* testsuite/gas/elf/bignum.d: New test driver file.
* testsuite/gas/elf/elf.exp: Run the new test.
lookup_symbol is often called with user input. Consequently, any
function called from lookup_symbol{,_in_language} should attempt to
deal with malformed input gracefully. After all, malformed user
input is not a programming/API error.
This patch does not attempt to find/correct all instances of this. It
only fixes locations in the code that trigger test suite failures.
This patch fixes PR breakpoints/18303, "Assertion: -breakpoint-insert
with windows paths of file in non-current directory".
The patch includes three new tests related to this. One is just
gdb.linespec/ls-errs.exp copied and converted to use C++ instead of C, and
to add a case using a file name containing a Windows-style logical drive
specifier. The others include an MI test to provide a regression test for
the specific case reported in PR 18303, and a C++ test for proper error
handling of access to a program variable when using a file scope specifier
that refers to a non-existent file.
Tested on x86_64 native Linux.
gdb/ChangeLog
2016-01-28 Keith Seitz <keiths@redhat.com>
PR breakpoints/18303
* cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
look for "::" instead of simply ":".
(cp_search_static_and_baseclasses): Return null_block_symbol for
malformed input.
Remove assertions.
* cp-support.c (cp_find_first_component_aux): Do not return
a prefix length for ':' unless the next character is also ':'.
gdb/testsuite/ChangeLog
2016-01-28 Don Breazeal <donb@codesourcery.com>
* gdb.cp/scope-err.cc: New test program.
* gdb.cp/scope-err.exp: New test script.
* gdb.linespec/ls-errs.c (myfunction): Expanded to have multiple
lines and "set breakpoint here" comment.
* gdb.linespec/ls-errs.exp: Added C++ testing and new test case.
Fixed some whitespace and format issues.
* gdb.mi/mi-linespec-err-cp.cc: New test program.
* gdb.mi/mi-linespec-err-cp.exp: New test script.
Symbols defined in PIE should be bound locally, the same as -shared
-Bsymbolic.
bfd/
PR ld/19827
* elf32-i386.c (elf_i386_check_relocs): Bind defined symbol
locally in PIE.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
ld/
PR ld/19827
* testsuite/ld-i386/i386.exp: Run PR ld/19827 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr19827.rd: New file.
* testsuite/ld-i386/pr19827a.S: Likewise.
* testsuite/ld-i386/pr19827b.S: Likewise.
* testsuite/ld-x86-64/pr19827.rd: Likewise.
* testsuite/ld-x86-64/pr19827a.S: Likewise.
* testsuite/ld-x86-64/pr19827b.S: Likewise.
If /proc is not mounted, GDB fails an assertion in find_new_threads_once:
Continuing.
.../src/gdb/linux-thread-db.c:1249: internal-error: find_new_threads_once: Assertion `!target_has_execution' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
That was supposed to catch misuses of td_ta_thr_iter, which is unsafe
for live debugging. However, if /proc is not mounted, we still
fallback to using it.
I didn't bother with a warning, because GDB already prints several
others related to failing to open /proc files.
gdb/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* linux-thread-db.c (try_thread_db_load_1): Leave
info->td_ta_thr_iter_p NULL iff debugging a live process and we
have /proc access.
(find_new_threads_once): Assert that we have a non-NULL
info->td_ta_thr_iter_p instead of checking whether the target has
execution.
On GNU/Linux archs that support displaced stepping, if /proc is not
mounted, GDB gets stuck not able to step past breakpoints:
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb)
That's because GDB can't figure out where the scratch pad is.
This is a regression introduced by the earlier changes to make the
Linux native target always work in non-stop mode.
This commit makes GDB detect the case and fallback to stepping over
breakpoints in-line.
gdb/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* infrun.c (displaced_step_prepare): Also disable displaced
stepping on NOT_SUPPORTED_ERROR.
* linux-tdep.c (linux_displaced_step_location): If reading auxv
fails, throw NOT_SUPPORTED_ERROR instead of generic error.
gdb/doc/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
Andreas Arnez <arnez@linux.vnet.ibm.com>
Marcin Kościelnicki <koriakin@0x04.net>
* gdb.texinfo (Tracepoint Actions): Document possible
unreliability of '$_ret'.
When adding the $_as_string convenience function, I missed a new test
failure in default.exp. The tests lists the convenience functions, so
$_as_string should be added to the expected list.
Fixes:
+FAIL: gdb.base/default.exp: show convenience ($_caller_is = <internal function _caller_is> not found)
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Add $_as_string to the list of expected
convenience functions.
Add a new command 'maint info line-table' to display the contents of
GDB's internal line table structure. Useful when trying to understand
problems (within gdb) relating to line tables.
gdb/ChangeLog:
* symmisc.c (maintenance_info_line_tables): New function.
(maintenance_print_one_line_table): New function.
(_initialize_symmisc): Register 'maint info line-table' command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'maint info line-table'
command.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: New tests for 'maint info line-table'.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
(s390_ax_pseudo_register_push_stack): New function.
(s390_gdbarch_init): Fill ax_pseudo_register_collect and
ax_pseudo_register_push_stack hooks.
This patch is a follow-up to "Add printf format specifier for printing
enumerator":
https://sourceware.org/ml/gdb-patches/2016-02/msg00144.html
Instead of having a solution specific to the printf command, Pedro
suggested adding a general purpose function $_as_string() that would
cover this use case and more.
So, in order to print the textual label of an enum, one can use:
(gdb) printf "Visiting node of type %s\n", $_as_string(node)
Visiting node of type NODE_INTEGER
gdb/ChangeLog:
* data-directory/Makefile.in (PYTHON_FILE_LIST): Install
gdb/function/as_string.py.
* python/lib/gdb/function/as_string.py: New file.
* NEWS: Mention the new $_as_string function.
gdb/testsuite/ChangeLog:
* gdb.python/py-as-string.exp: New file.
* gdb.python/py-as-string.c: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Convenience Functions): Document $_as_string.
These tests should have been adjusted by f303dbd60d (Fix PR
threads/19422 - show which thread caused stop), but clearly I had
missed grepping for potential-fail cases.
gdb/testsuite/ChangeLog
2016-03-09 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-into-signal.exp: Adjust to "Program received
signal" -> "Thread NN received signal" output change.
* gdb.threads/ia64-sigill.exp: Likewise.
* gdb.threads/linux-dp.exp: Likewise.
* gdb.threads/manythreads.exp: Likewise.
* gdb.threads/pending-step.exp: Likewise.
* gdb.threads/print-threads.exp: Likewise.
* gdb.threads/sigstep-threads.exp: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* gdb.threads/tls.exp: Likewise.
I didn't manage to usefully split this further into smaller
independent pieces, so:
- Use "struct buffer" more.
- Split out the responsibility of composing a complete command line
from multiple input lines split with backslash
(
E.g.:
(gdb) print \
1 + \
2
$1 = 3
(gdb)
)
to a separate function. Note we don't need the separate
readline_input_state and more_to_come globals at all. They were
just obfuscating the logic.
- Factor out the tricky mostly duplicated code in
command_line_handler and command_line_input.
gdb/ChangeLog
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (more_to_come): Delete.
(struct readline_input_state): Delete.
(readline_input_state): Delete.
(get_command_line_buffer): New function.
(command_handler): Update comments. Don't handle NULL commands
here. Do not execute commented lines.
(command_line_append_input_line): New function.
(handle_line_of_input): New function, partly based on
command_line_handler and command_line_input.
(command_line_handler): Rewrite.
* event-top.h (command_handler): New declaration.
(command_loop): Defer command execution to command_handler.
(command_line_input): Update comments. Simplify, using struct
buffer and handle_line_of_input.
* top.h (struct buffer): New forward declaration.
(handle_line_of_input): New declaration.
There doesn't seem to be much point in trying to reuse this buffer.
Prefer simplicity instead.
(In case you're wondering whether this fixes an off-by-one: linelength
is misnamed; it's really a size including terminating null char.)
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c (command_line_handler): Use xfree + xstrdup instead
of xrealloc + strcpy.
* main.c (captured_main): Use xstrdup instead of xmalloc plus
manual clear.
* top.c (saved_command_line): Rewrite comment.
(saved_command_line_size): Delete.
(command_line_input): Use xfree + xstrdup instead of xrealloc +
strcpy.
* top.h (saved_command_line_size): Delete declaration.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* event-top.c: Include buffer.h.
(gdb_readline_no_editing_callback): Use struct buffer instead
of xrealloc.
gdb/ChangeLog:
2016-03-09 Pedro Alves <palves@redhat.com>
* common/buffer.h (buffer_grow_char): New function.
* top.c: Include buffer.h.
(gdb_readline_no_editing): Rename 'prompt_arg' parameter to
'prompt'. Use struct buffer instead of xrealloc.
