Given two or more modules that import each other's scope, the current symbol
lookup routines would go round in circles looking through each import from
each module, possibly checking the same module twice or more until all possible
paths are marked as "searched".
Given enough modules, this causes an exponential slowdown in time taken to find
symbols that do exist, and infinite recursion when they don't.
gdb/ChangeLog:
* d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
cyclic imports.
gdb/testsuite/ChangeLog:
* gdb.dlang/circular.c: New file.
* gdb.dlang/circular.exp: New file.
This is an obvious patch to fix the following build error seen with
--enable-build-with-cxx:
../../src/gdb/rs6000-tdep.c: In function ‘rs6000_frame_cache* rs6000_frame_cache(frame_info*, void**)’:
../../src/gdb/rs6000-tdep.c:3242:15: error: invalid conversion from ‘void*’ to ‘rs6000_frame_cache*’ [-fpermissive]
return (*this_cache);
~^~~~~~~~~~~~
gdb/ChangeLog
* rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
to avoid invalid conversion from void *.
For these three relocations, 17 bit signed value should be used, instead of
16 bit. The bitsize field is changed from 16 to 17, this field in aarch64
backend is used for overflow check only.
bfd/
2016-02-26 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Fix signed overflow
check for MOVW_SABS_G0, MOVW_SABS_G1, MOVW_SABS_G2.
ld/
2016-02-26 Renlin Li <renlin.li@arm.com>
* testsuite/ld-aarch64/aarch64-elf.exp: Run new testcases.
* testsuite/ld-aarch64/emit-relocs-270.d: Update to use new boundary.
* testsuite/ld-aarch64/emit-relocs-271.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-272.d: Likewise.
* testsuite/ld-aarch64/emit-relocs-270-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-270-overflow.s: New.
* testsuite/ld-aarch64/emit-relocs-271-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-271-overflow.s: New.
* testsuite/ld-aarch64/emit-relocs-272-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-272-overflow.s: New.
R_386_GOT32X, R_X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX relocations
retrieve the symbol address via its GOT slot. If the symbol address is
known at the link-time, we can use it directly by changing instruction
encoding. Indirect branch can only be converted to PC relative direct
branch. MOV can be changed to LEA or encoded differently with signed
address. The subset of binary operations can be encoded only with
signed address.
If undefined weak symbol is resolved to zero link-time, we can use it
as address. Zero addresss can't used with PC relative direct branch
when PIC is true since the current PC is unknown. In 64-bit, 32-bit
relocation for PC relatiave direct branch to zero may also overflow.
If this optimization causes relocation overflow, --no-relax can be used
to work around it.
bfd/
PR ld/19609
* elf32-i386.c (elf_i386_convert_load): Convert to R_386_32 for
load with locally bound symbols if PIC is false or there is no
base register. Optimize branch to 0 if PIC is false.
(elf_i386_relocate_section): Don't generate dynamic relocations
against undefined weak symbols if PIC is false.
* elf64-x86-64.c (elf_x86_64_convert_load): Disable optimization
if we can't estimate relocation overflow with --no-relax.
Convert to R_X86_64_32S/R_X86_64_32 for load with locally bound
symbols if PIC is false. Optimize branch to 0 if PIC is false.
(elf_x86_64_relocate_section): Don't generate dynamic relocations
against undefined weak symbols if PIC is false.
ld/
PR ld/19609
* testsuite/ld-i386/got1.dd: Updated.
* testsuite/ld-i386/lea1c.d: Likewise.
* testsuite/ld-i386/load1-nacl.d: Likewise.
* testsuite/ld-i386/load1.d: Likewise.
* testsuite/ld-i386/load4b.d: Likewise.
* testsuite/ld-i386/load5b.d: Likewise.
* testsuite/ld-i386/mov1b.d: Likewise.
* testsuite/ld-x86-64/mov1b.d: Likewise.
* testsuite/ld-x86-64/mov1d.d: Likewise.
* testsuite/ld-ifunc/ifunc-21-i386.d: Likewise.
* testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise.
* testsuite/ld-ifunc/ifunc-22-i386.d: Likewise.
* testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise.
* testsuite/ld-x86-64/gotpcrel1.dd: Likewise.
* testsuite/ld-x86-64/lea1a.d: Likewise.
* testsuite/ld-x86-64/lea1b.d: Likewise.
* testsuite/ld-x86-64/lea1c.d: Likewise.
* testsuite/ld-x86-64/lea1d.d: Likewise.
* testsuite/ld-x86-64/lea1e.d: Likewise.
* testsuite/ld-x86-64/lea1f.d: Likewise.
* testsuite/ld-x86-64/mov1b.d: Likewise.
* testsuite/ld-x86-64/mov1d.d: Likewise.
* testsuite/ld-x86-64/pr13082-3b.d: Likewise.
* testsuite/ld-x86-64/pr13082-4b.d: Likewise.
* testsuite/ld-x86-64/lea1.s: Add tests for 32-bit registers.
* testsuite/ld-i386/pr19609-1.s: New file.
* testsuite/ld-i386/pr19609-1a.d: Likewise.
* testsuite/ld-i386/pr19609-1b.d: Likewise.
* testsuite/ld-i386/pr19609-1c.d: Likewise.
* testsuite/ld-i386/pr19609-1d.d: Likewise.
* testsuite/ld-i386/pr19609-1e.d: Likewise.
* testsuite/ld-i386/pr19609-1f.d: Likewise.
* testsuite/ld-i386/pr19609-1g.d: Likewise.
* testsuite/ld-i386/pr19609-1h.d: Likewise.
* testsuite/ld-i386/pr19609-1i.d: Likewise.
* testsuite/ld-i386/pr19609-2.s: Likewise.
* testsuite/ld-i386/pr19609-2a.d: Likewise.
* testsuite/ld-i386/pr19609-2b.d: Likewise.
* testsuite/ld-i386/pr19609-2c.d: Likewise.
* testsuite/ld-i386/undefweak.s: Likewise.
* testsuite/ld-i386/undefweaka.d: Likewise.
* testsuite/ld-i386/undefweakb.d: Likewise.
* testsuite/ld-x86-64/pr13082-3c.d: Likewise.
* testsuite/ld-x86-64/pr13082-3d.d: Likewise.
* testsuite/ld-x86-64/pr19609-1.s: Likewise.
* testsuite/ld-x86-64/pr19609-1a.d: Likewise.
* testsuite/ld-x86-64/pr19609-1b.d: Likewise.
* testsuite/ld-x86-64/pr19609-1c.d: Likewise.
* testsuite/ld-x86-64/pr19609-1d.d: Likewise.
* testsuite/ld-x86-64/pr19609-1e.d: Likewise.
* testsuite/ld-x86-64/pr19609-1f.d: Likewise.
* testsuite/ld-x86-64/pr19609-1g.d: Likewise.
* testsuite/ld-x86-64/pr19609-1h.d: Likewise.
* testsuite/ld-x86-64/pr19609-1i.d: Likewise.
* testsuite/ld-x86-64/pr19609-1j.d: Likewise.
* testsuite/ld-x86-64/pr19609-1k.d: Likewise.
* testsuite/ld-x86-64/pr19609-1l.d: Likewise.
* testsuite/ld-x86-64/pr19609-1m.d: Likewise.
* testsuite/ld-x86-64/pr19609-2.s: Likewise.
* testsuite/ld-x86-64/pr19609-2a.d: Likewise.
* testsuite/ld-x86-64/pr19609-2b.d: Likewise.
* testsuite/ld-x86-64/pr19609-2c.d: Likewise.
* testsuite/ld-x86-64/pr19609-2d.d: Likewise.
* testsuite/ld-x86-64/pr19609-3.s: Likewise.
* testsuite/ld-x86-64/pr19609-3a.d: Likewise.
* testsuite/ld-x86-64/pr19609-3b.d: Likewise.
* testsuite/ld-x86-64/pr19609-4.s: Likewise.
* testsuite/ld-x86-64/pr19609-4a.d: Likewise.
* testsuite/ld-x86-64/pr19609-4b.d: Likewise.
* testsuite/ld-x86-64/pr19609-4c.d: Likewise.
* testsuite/ld-x86-64/pr19609-4d.d: Likewise.
* testsuite/ld-x86-64/pr19609-4e.d: Likewise.
* testsuite/ld-x86-64/pr19609-5.s: Likewise.
* testsuite/ld-x86-64/pr19609-5a.d: Likewise.
* testsuite/ld-x86-64/pr19609-5b.d: Likewise.
* testsuite/ld-x86-64/pr19609-5c.d: Likewise.
* testsuite/ld-x86-64/pr19609-5d.d: Likewise.
* testsuite/ld-x86-64/pr19609-5e.d: Likewise.
* testsuite/ld-x86-64/pr19609-6.s: Likewise.
* testsuite/ld-x86-64/pr19609-6a.d: Likewise.
* testsuite/ld-x86-64/pr19609-6b.d: Likewise.
* testsuite/ld-x86-64/pr19609-6c.d: Likewise.
* testsuite/ld-x86-64/pr19609-6d.d: Likewise.
* testsuite/ld-x86-64/pr19609-7.s: Likewise.
* testsuite/ld-x86-64/pr19609-7a.d: Likewise.
* testsuite/ld-x86-64/pr19609-7b.d: Likewise.
* testsuite/ld-x86-64/pr19609-7c.d: Likewise.
* testsuite/ld-x86-64/pr19609-7d.d: Likewise.
* testsuite/ld-i386/i386.exp: Run undefweak tests and tests for
PR ld/19609.
* testsuite/ld-x86-64/x86-64.exp: Run pr13082-3c, pr13082-3d
and tests for PR ld/19609.
This patch fixes various bugs in arm_record_exreg_ld_st_insn, and use
gdb.reverse/insn-reverse.c to test more arm instructions.
- Set flag SINGLE_REG correctly. In the arch reference manual,
SING_REG is true when the bit 8 of instruction is zero.
- Record the right D registers for instructions changing S registers.
- Fix the order of length and address in record_buf_mem array.
- Shift the offset by 2 instead of by 24.
This patch also fixes one internal error,
(gdb) PASS: gdb.reverse/finish-precsave.exp: BP at end of main
continue^M
Continuing.^M
../../binutils-gdb/gdb/utils.c:1072: internal-error: virtual memory exhausted.^M
A problem internal to GDB has been detected,FAIL: gdb.reverse/finish-precsave.exp: run to end of main (GDB internal error)
gdb:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
per bit 8. Check bit 20 instead of bit 4 for VMOV
instruction. Record D registers for instructions changing
S registers. Change of the order of length and address
in record_buf_mem array.
gdb/testsuite:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/insn-reverse.c [__arm__] (ext_reg_load): New.
[__arm__] (ext_reg_mov, ext_reg_push_pop): New.
(testcases): Update.
When GDB decodes these thumb special data instructions, such as 'mov sp, r7'
the Rd is got incorrectly. According to the arch reference manual, the Rd
is DN:Rdn, in which DN is bit 7 and Rdn is bits 0 to 2. This patch fixes it.
gdb:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
number of Rd.
gdb/testsuite:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/aarch64.c: Rename to ...
* gdb.reverse/insn-reverse.c: ... it.
* gdb.reverse/aarch64.exp: Rename to ...
* gdb.reverse/insn-reverse.exp: ... it.
I said we can generialize gdb.reverse/aarch64.exp for other
architectures https://sourceware.org/ml/gdb-patches/2015-05/msg00482.html
and here is the patch to change aarch64.exp so that it can be used to
test for other architectures as well.
gdb/testsuite:
2016-02-26 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/aarch64.c: [__aarch64__] Include arm_neon.h.
(testcase_ftype): New.
(testcases): New array.
(n_testcases): New.
(main): Call each element in testcases.
* gdb.reverse/aarch64.exp: Remove is_aarch64_target check.
(read_testcase): New.
Do the tests in a loop.
* elf64-ppc.c (create_linkage_sections): Create sfpr when
save_restore_funcs, rest of sections when not relocatable.
(ppc64_elf_init_stub_bfd): Always call create_linkage_sections.
(sfpr_define): Define all symbols on emitted code.
(ppc64_elf_func_desc_adjust): Adjust for sfpr now being created
when relocatable. Move sfpr_define loop earlier.
Currently, 31-bit gdbserver doesn't support collecting/supplying high
GPRs, VX registers, and TDB data. This is not much of a problem now,
since machines that have them usually have a 64-bit gdbserver that can
be used to debug 31-bit targets just fine. However, with fast
tracepoints, it's not possible to use a 64-bit gdbserver with a 31-bit
IPA (and thus a 31-bit target), so 31-bit gdbserver has to be used
for 31-bit targets. Thus, this patch is needed to allow collecting
high GPRs and VX registers on 31-bit targets via fast tracepoints.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_num_regs_3264): Define on 31-bit too.
(s390_regmap_3264) [!__s390x__]: New global.
(s390_collect_ptrace_register): Skip map entries containing -1.
(s390_supply_ptrace_register): Ditto.
(s390_fill_gprs_high): New function.
(s390_store_gprs_high): New function.
(s390_regsets): Add NT_S390_HIGH_GPRS.
(s390_get_hwcap): Enable on 31-bit.
(have_hwcap_s390_high_gprs): Enable on 31-bit.
(s390_arch_setup): Enable detection of high GPRs, TDB, VX on 31-bit.
Detect NT_S390_HIGH_GPRS.
(s390_usrregs_info_3264): Enable on 31-bit.
(s390_regs_info): Enable regs_info_3264 on 31-bit.
(initialize_low_arch): Initialize s390_regsets_info_3264 on 31-bit.
This patch removes gdb.base/branches.c which was added by the following
commit, but it is not used at all.
commit ea8122af14
Author: John Metzler <jmetzler@cygnus>
Date: Thu Apr 16 17:56:11 1998 +0000
Thu Apr 16 10:52:34 1998 John Metzler <jmetzler@cygnus.com>
* gdb.base/branches.c: Code with lots of loops and
subroutines. Used to test gdbs ability to single step through PC
changes, especially to test mips-tdep.c:mips_next_pc
gdb/testsuite:
2016-02-25 Yao Qi <yao.qi@linaro.org>
* gdb.base/branches.c: Remove.
If gdbserver and IPA are using different tdesc, they will disagree
about 'R' trace packet size. This results in mangled traces.
To make sure they pick the same tdesc, gdbserver pokes the tdesc
(specified as an index in a target-specific list) into a global
variable in IPA. In theory, IPA could find out the tdesc on its
own, but that may be complex (in particular, I don't know how to
tell whether we have LAST_BREAK on s390 without messing with ptrace),
and we'd have to duplicate the logic.
Tested on i386 and x86_64. On i386, it fixes two FAILs in ftrace.exp.
On x86_64, these failures have been KFAILed - one of them works now,
but the other now fails due to an unrelated reason (ugh).
gdb/gdbserver/ChangeLog:
PR gdb/13808
* Makefile.in: Add i386-*-linux-ipa.o and amd64-*-linux-ipa.o.
* configure.srv: Ditto.
* linux-aarch64-ipa.c (get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment.
* linux-amd64-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_amd64_linux): Remove prototype.
(tdesc_amd64_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-i386-ipa.c: Add "linux-x86-tdesc.h" include.
(init_registers_i386_linux): Remove prototype.
(tdesc_i386_linux): Remove declaration.
(get_ipa_tdesc): New function.
(initialize_low_tracepoint): Remove ipa_tdesc assignment,
initialize remaining tdescs.
* linux-low.c (linux_get_ipa_tdesc_idx): New function.
(linux_target_ops): wire in linux_get_ipa_tdesc_idx.
* linux-low.h (struct linux_target_ops): Add get_ipa_tdesc_idx.
* linux-x86-low.c: Move tdesc declarations to linux-x86-tdesc.h.
(x86_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in x86_get_ipa_tdesc_idx.
* linux-x86-tdesc.h: New file.
* target.h (struct target_ops): Add get_ipa_tdesc_idx.
(target_get_ipa_tdesc_idx): New macro.
* tracepoint.c (ipa_tdesc_idx): New macro.
(struct ipa_sym_addresses): Add addr_ipa_tdesc_idx.
(symbol_list): Add ipa_tdesc_idx.
(cmd_qtstart): Write ipa_tdesc_idx in the target.
(ipa_tdesc): Remove.
(ipa_tdesc_idx): New variable.
(get_context_regcache): Use get_ipa_tdesc.
(gdb_collect): Ditto.
(gdb_probe): Ditto.
* tracepoint.h (get_ipa_tdesc): New prototype.
(ipa_tdesc): Remove.
gdb/testsuite/ChangeLog:
PR gdb/13808
* gdb.trace/ftrace.exp (test_fast_tracepoints): Remove kfail.
We see this error when building with gcc 4.3.
../../gdb/i386-linux-tdep.c: In function ‘i386_linux_handle_segmentation_fault’:
../../gdb/i386-linux-tdep.c:399: error: ‘access’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘upper_bound’ may be used uninitialized in this function
../../gdb/i386-linux-tdep.c:399: error: ‘lower_bound’ may be used uninitialized in this function
It's a false positive, since the variables will always get initialized
in the TRY clause, and the CATCH returns.
gdb/ChangeLog:
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
Initialize variables.
The check used hardcoded targets and wasn't doing anything useful anyway,
since unsupported architectures blow up on link due to missing the IPA
library before they ever get to that check.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Remove unnecessary target check.
The PPC64 tracepoint patch added \y at the end of the call_insn pattern -
without that, it embarassed itself and matched the 'bl' in "Dump of
assem*bl*er code for function" as the powerpc call opcode. Since that
sounds like a generally good idea, I've added \y before and after
call_insn for every target. As a result, I had to change x86_64's mnemonic
to 'callq'.
gdb/testsuite/ChangeLog:
* gdb.trace/entry-values.exp: Surround $call_insn with '\y',
change x86_64 call_insn to 'callq'.
When encoding the agent expression operation ax_reg or ax_reg_mask, the
register number used is internal to GDB. However GDBServer expects a tdesc
based number.
This usually does not cause a problem since at the moment, for raw
registers GDBServer R trace action ignores the register mask and just
collects all registers.
It can be a problem, however with pseudo registers on some platforms if the
tdesc number doesn't match the GDB internal register number.
This is the case with ARM, the upcoming ARM tracepoint support, fails
these test cases without this patch:
gdb.trace/collection.exp: collect register locals collectively:*
GDBSever would exit with: unhandled register size
Since the register number is not mapped.
This patch fixes these issues by calling gdbarch_remote_register_number
before encoding the register number in the ax_reg or ax_reg_mask operation.
Tested on x86 native-gdbserver no regressions observed.
gdb/ChangeLog:
* ax-general.c (ax_reg): Call gdbarch_remote_register_number.
(ax_reg_mask): Likewise.
Add elf_x86_64_need_pic and replace x86_64_elf_howto_table[r_type].name
with howto->name.
* elf64-x86-64.c (elf_x86_64_need_pic): New function.
(elf_x86_64_relocate_section): Use it. Replace
x86_64_elf_howto_table[r_type] with howto.
Some gas tests are excluded for arc targets using the pattern arc-*-*,
however this only covers little endian arc targets. This commit extends
the patter to cover big endian arc targets, the pattern is now arc*-*-*.
gas/ChangeLog:
* testsuite/gas/all/gas.exp: Change target pattern to cover
arceb-*.
* testsuite/gas/all/redef3.d: Likewise.
* testsuite/gas/elf/elf.exp: Likewise.
We need to update symbol version for symbols from linker script.
bfd/
PR ld/19698
* elflink.c (bfd_elf_record_link_assignment): Set versioned if
symbol version is unknown.
ld/
PR ld/19698
* testsuite/ld-elf/pr19698.d: New file.
* testsuite/ld-elf/pr19698.s: Likewise.
* testsuite/ld-elf/pr19698.t: Likewise.
This unbreaks pending/delayed breakpoints handling, as well as
hardware watchpoints, on MIPS.
Ref: https://sourceware.org/ml/gdb-patches/2016-02/msg00681.html
The MIPS kernel reports SI_KERNEL for all kernel generated traps,
instead of TRAP_BRKPT / TRAP_HWBKPT, but GDB isn't aware of this.
Basically, this commit:
- Folds watchpoints logic into check_stopped_by_breakpoint, and
renames it to save_stop_reason.
- Adds GDB_ARCH_IS_TRAP_HWBKPT.
- Makes MIPS set both GDB_ARCH_IS_TRAP_BRPT and
GDB_ARCH_IS_TRAP_HWBKPT to SI_KERNEL. In save_stop_reason, we
handle the case of the same si_code returning true for both
TRAP_BRPT and TRAP_HWBKPT by looking at what the debug registers
say.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-nat.c (save_sigtrap) Delete.
(stop_wait_callback): Call save_stop_reason instead of
save_sigtrap.
(check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Bits of save_sigtrap folded here.
Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out
common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_nat_filter_event): Call save_stop_reason instead of
save_sigtrap.
* nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
si_code for MIPS.
* nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add
comments on MIPS behavior.
(GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.
gdb/gdbserver/ChangeLog:
2016-02-24 Pedro Alves <palves@redhat.com>
* linux-low.c (check_stopped_by_breakpoint): Rename to ...
(save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and
handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.
Factor out common code between the USE_SIGTRAP_SIGINFO and
!USE_SIGTRAP_SIGINFO blocks.
(linux_low_filter_event): Call save_stop_reason instead of
check_stopped_by_breakpoint and check_stopped_by_watchpoint.
Update comments.
(linux_wait_1): Update comments.
As it is planned to add more architectures to this test, rename to a more
generic name.
gdb/testsuite/ChangeLog:
* gdb.trace/tfile-avx.c: Move to...
* gdb.trace/tracefile-pseudo-reg.c: Here.
* gdb.trace/tfile-avx.exp: Move to...
* gdb.trace/tracefile-pseudo-reg.exp: Here.
Support z-point, so tracepoints and breakpoints can be inserted at the same
location.
gdb/gdbserver/ChangeLog:
2016-02-24 Wei-cheng Wang <cole945@gmail.com>
* linux-ppc-low.c (ppc_supports_z_point_type): New function:
(ppc_insert_point, ppc_remove_point): Insert/remove z-packet breakpoints.
(ppc64_emit_ops_vector): Add target ops - ppc_supports_z_point_type,
ppc_insert_point, ppc_remove_point.
opcodes/
2016-02-24 Renlin Li <renlin.li@arm.com>
* arm-dis.c (print_insn_coprocessor): Check co-processor number for
cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.
gas/
2016-02-24 Renlin Li <renlin.li@arm.com>
* testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11.
* testsuite/gas/arm/copro.d: Update.
Since plt_got.offset may be updated in x86 allocate_dynrelocs, set
plt_got.offset to (bfd_vma) -1 when setting needs_plt to 0.
* elf32-i386.c (elf_i386_allocate_dynrelocs): Set plt_got.offset
to (bfd_vma) -1 when setting needs_plt to 0.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
This commit fixes an error in exec_file_locate_attach where
the main executable could be loaded from outside the sysroot
if a nonempty, non-"target:" sysroot was set but the discovered
executable filename did not exist in that sysroot and did exist
on the main filesystem.
gdb/ChangeLog:
* exec.c (exec_file_locate_attach): Do not attempt to
locate main executable locally if not found in sysroot.
gdb/testsuite/ChangeLog:
* gdb.base/attach-pie-noexec.exp: Do not expect an error
message on attach.
