gold/
* mips.cc (enum Special_relocation_symbol): New enum type.
(is_readonly_section): New function.
(eh_reloc): Likewise.
(Mips_got_entry::is_section_symbol_): New member.
(Mips_got_entry::is_section_symbol): New method.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol
argument.
(Mips_relobj::mips_elf_options_section_name): New method.
(Mips_output_data_got::record_local_got_symbol): Add
is_section_symbol argument, and pass it to
Mips_got_info::record_local_got_symbol.
(Mips_output_data_got::got_offset): Add addend argument, and pass
it to Relobj::local_got_offset.
(struct Mips_output_reloc_writer): New type.
(class Mips_output_data_reloc): New class.
(Mips_output_data_plt::Reloc_section): Change type to
Mips_output_data_reloc.
(Target_mips::Reloc_section): Likewise.
(Mips_reloc_types::get_r_addend): Remove unsigned from return type.
(Mips_classify_reloc::get_r_type2): New method.
(Mips_classify_reloc::get_r_type3): Likewise.
(Mips_classify_reloc::get_r_ssym): Likewise.
(Target_mips::Reloca_section): Remove.
(Relocate::should_apply_static_reloc): Rename from
should_apply_r_mips_32_reloc.
(Target_mips::copy_reloc): Replace Reltype parameter with r_type
and r_offset.
(Mips_relocate_functions::Valtype): New type.
(Mips_relocate_functions::Valtype64): New type.
(Mips_relocate_functions::check_overflow): New method.
(Mips_relocate_functions::mips_reloc_unshuffle): Move to public
interface.
(Mips_relocate_functions::mips_reloc_shuffle): Likewise.
(Mips_relocate_functions::rel16): Add support for resolving
relocations for Mips64.
(Mips_relocate_functions::rel32): Likewise.
(Mips_relocate_functions::reljalr): Likewise.
(Mips_relocate_functions::relpc32): Likewise.
(Mips_relocate_functions::rel26): Likewise.
(Mips_relocate_functions::relpc16): Likewise.
(Mips_relocate_functions::relmicromips_pc7_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc10_s1): Likewise.
(Mips_relocate_functions::relmicromips_pc16_s1): Likewise.
(Mips_relocate_functions::do_relhi16): Likewise.
(Mips_relocate_functions::do_relgot16_local): Likewise.
(Mips_relocate_functions::rello16): Likewise.
(Mips_relocate_functions::relgot): Likewise.
(Mips_relocate_functions::relgotpage): Likewise.
(Mips_relocate_functions::relgotofst): Likewise.
(Mips_relocate_functions::relgot_hi16): Likewise.
(Mips_relocate_functions::relgot_lo16): Likewise.
(Mips_relocate_functions::relgprel): Likewise.
(Mips_relocate_functions::relgprel32): Likewise.
(Mips_relocate_functions::tlsrelhi16): Likewise.
(Mips_relocate_functions::tlsrello16): Likewise.
(Mips_relocate_functions::tlsrel32): Likewise.
(Mips_relocate_functions::relsub): Likewise.
(Mips_relocate_functions::releh): New method.
(Mips_relocate_functions::rel64): Likewise.
(Mips_got_info::record_local_got_symbol): Add is_section_symbol and
pass it to Mips_got_entry.
(Mips_got_info::add_local_entries): Pass addend argument
to code functions, and for STT_SECTION symbols call
add_symbolless_local_addend.
(Mips_got_info::add_tls_entries): Pass addend argument to code
functions.
(Mips_relobj::do_read_symbols): Read gp value that was used to
create object.
(Mips_output_data_plt::plt_entry): Remove opcode from l[wd]
instruction. Opcode for instruction will be selected later.
(Target_mips::gc_process_relocs): Add case for SHT_RELA.
(Target_mips::scan_relocatable_relocs): Likewise.
(Target_mips::emit_relocs_scan): Likewise.
(Target_mips::relocate_relocs): Likewise.
(Target_mips::do_finalize_sections): Skip objects for merging
processor specific flags in which all input sections will be
discarded.
(mips_get_size_for_reloc): Add case for R_MIPS_EH.
(Target_mips::Scan::get_reference_flags): Likewise.
(Target_mips::relocate_special_relocatable): Call rel26 method with
calculate_only and calculated_value arguments.
(Target_mips::Scan::local): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass
is_section_symbol to Mips_got_info::record_local_got_symbol.
(Target_mips::Scan::global): Add case for R_MIPS_EH. Don't create a
dynamic relocation against a readonly sections, and pass r_type
and r_offset to Target_mips::copy_reloc.
(Target_mips::Relocate::relocate): Add support for resolving
relocations for Mips64.
(Target_mips::mips_info): Add case for Mips64 default dynamic
linker name.
(Target_selector_mips): Correct emulation names.
currently
gdb -p <pid from a container>
will print:
warning: Target and debugger are in different PID namespaces; thread lists and other data are likely unreliable
It correctly states the problem but it does not say how to solve it.
Originally I wanted to suggest also the Docker "-p 1234:1234" parameter but
I see the containers are more general topic than just Docker (even LxC etc.).
According to Gary future GDBs should be able to work even without gdbserver.
But currently gdbserver is still required.
gdb/ChangeLog
2016-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-thread-db.c (check_pid_namespace_match): Extend the message.
This patch addresses a failure in
gdb.threads/forking-threads-plus-breakpoint.exp:
FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1:
detach_on_fork=on: inferior 1 exited (timeout)
Cause:
A fork event was reported to GDB before GDB knew about the parent
thread, followed immediately by a breakpoint event in a different
thread. The parent thread was subsequently added via
remote_notice_new_inferior in process_stop_reply, but when the thread
was added the thread_info.state was set to THREAD_STOPPED. The fork
event was then handled correctly, but when the fork parent was resumed
via a call to keep_going, the state was unchanged.
The breakpoint event was then handled, which caused all the
non-breakpoint threads to be stopped. When the breakpoint thread was
resumed, all the non-breakpoint threads were resumed via
infrun.c:restart_threads. Our old fork parent wasn't restarted,
because it still had thread_info.state set to THREAD_STOPPED.
Ultimately the program under debug hung waiting for a pthread_join
while the old fork parent was stopped forever by GDB.
Fix:
Since this is non-stop, then the bug is that the thread should have
been added in THREAD_RUNNING state. Consider that infrun may be
pulling target events out of the target_ops backend into its own event
queue, but, not process them immediately. E.g., infrun may be
stopping all threads temporarily for a step-over-breakpoint operation
for thread A (stop_all_threads). The waitstatus of all threads is
thus left pending in the thread structure (save_status), including the
fork event of thread B. Right at this point, if the user does "info
threads", that should show thread B (the fork parent) running, not
stopped, even if internally, gdb is holding it paused for a little
bit.
Thus if in non-stop mode, always add new threads in the external
user-visible THREAD_RUNNING state. Change remote_notice_new_inferior
to accept the internal executing state of the thread instead, with
EXECUTING set to 1 when we discover a thread that is running on the
target (such as through remote_update_thread_list), and 0 when the
thread is really paused (such as when we see a stop reply).
Tested on x86_64 Linux and Nios II Linux target with x86 Linux host.
gdb/ChangeLog:
2016-03-17 Pedro Alves <palves@redhat.com>
Don Breazeal <donb@codesourcery.com>
PR remote/19496
* infcmd.c (notice_new_inferior): Use the 'leave_running' argument
instead of checking the 'non_stop' global.
* remote.c (remote_add_thread): New parameter 'executing'. Use it
to set the new thread's executing state.
(remote_notice_new_inferior): Rename parameter 'running' to
'executing'. Always set the thread state to THREAD_RUNNING in
non-stop mode, and to THREAD_STOPPED in all-stop mode. Pass
EXECUTING to remote_add_thread and notice_new_inferior.
(remote_update_thread_list): Update to pass executing state, not
running state.
Represent new Linux syscalls for s390 and s390x in GDB's syscall info.
Add the syscalls from 355 (userfaultfd) up to 374 (mlock2) as well as
the previously reserved NUMA syscalls 268-270, 287, and 310.
gdb/ChangeLog:
* syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
to 374.
* syscalls/s390x-linux.xml: Likewise.
Since test artifacts are organized in a directory hierarchy, the
s390-multiarch test case is not executed correctly any more. This is
because it uses an obsolete way of constructing the output paths.
This fix invokes standard_testfile instead.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-multiarch.exp: Use standard_testfile instead of
maintaining separate logic for constructing the output path.
The function record_linux_system_call() often records a memory area
whose address is contained in a register. So far this required two
function calls: one for fetching the register value, and another one for
recording the memory area. These two function calls are now merged into
a new local helper function, and all occurrences are adjusted. This
reduces the source code and makes it more readable.
gdb/ChangeLog:
* linux-record.c (record_mem_at_reg): New helper function.
(record_linux_system_call): Exploit new helper function where
applicable.
This patch added handling for some syscalls to linux-record.c:
https://sourceware.org/ml/gdb-patches/2015-10/msg00452.html
But for both `pipe' and `pipe2' the patch lacks a statement after an
`if', such that the following `break' is interpreted as the `if'-body
instead.
This adds the missing (return-) statements for the conditionals.
gdb/ChangeLog:
* linux-record.c (record_linux_system_call): Add missing return
statements to handling of pipe and pipe2 syscalls.
This patch addresses "fork:Interrupted system call" (or wait:) failures
in gdb.threads/forking-threads-plus-breakpoint.exp.
The test program spawns ten threads, each of which do ten fork/waitpid
sequences. The cause of the problem was that when one of the fork
children exited before the corresponding fork parent could initiate its
waitpid for that child, a SIGCHLD and/or SIGSTOP was delivered and
interrupted a fork or waitpid in another thread.
The fix was to wrap the system calls in a loop to retry the call if
it was interrupted, like:
do
{
pid = fork ();
}
while (pid == -1 && errno == EINTR);
Since this is a Linux-only test I figure it is OK to use errno and EINTR.
I tried a number of alternative fixes using SIG_IGN, SA_RESTART,
pthread_sigblock, and bsd_signal, but none of these worked as well.
Tested on Nios II Linux target with x86 Linux host.
gdb/testsuite/ChangeLog:
2016-03-16 Don Breazeal <donb@codesourcery.com>
* gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
Retry fork and waitpid on interrupted system call errors.
* gdb.threads/forking-threads-plus-breakpoint.exp: (do_test):
Use with_timeout_factor to increase timeout to 90.
gas/
* config/tc-arm.c (N_S_32): New.
(N_F_16_32): Likewise.
(N_SUF_32): Support N_F16.
(N_IF_32): Likewise.
(neon_dyadic_misc): Likewise.
(do_neon_cmp): Likewise.
(do_neon_cmp_inv): Likewise.
(do_neon_mul): Likewise.
(do_neon_fcmp_absolute): Likewise.
(do_neon_step): Likewise.
(do_neon_abs_neg): Likewise.
(CVT_FLAVOR_VAR): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_recip_est): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(neon_check_type): Check architecture support for FP16 extension.
(insns): Update comments.
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
error file.
opcode/
* arm-dis.c (neon_opcodes): Support new FP16 instructions.
Arguments are passed in r0-r6 on arm linux syscall (both EABI and OABI).
This patch is to set arm_linux_record_tdep.arg{1-7} to the right
register number.
This patch fixes the following test failures...
-FAIL: gdb.reverse/getresuid-reverse.exp: check ruid record
-FAIL: gdb.reverse/getresuid-reverse.exp: check rgid record
-FAIL: gdb.reverse/pipe-reverse.exp: check pipe record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/readv-reverse.exp: check readv record
-FAIL: gdb.reverse/waitpid-reverse.exp: check waitpid record
gdb:
2016-03-16 Yao Qi <yao.qi@linaro.org>
* arm-linux-tdep.c (arm_linux_init_abi): Fix
arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
arm_linux_record_tdep.arg3. Set arm_linux_record_tdep.arg4,
arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
arm_linux_record_tdep.arg7.
* read.c (emit_expr_with_reloc): Add code check a bignum with
nbytes == 1.
* config/rx/rx-parse.y (rx_intop): Accept bignum values for sizes
other than 32-bits.
* testsuite/gas/elf/bignum.s: New test source file.
* testsuite/gas/elf/bignum.d: New test driver file.
* testsuite/gas/elf/elf.exp: Run the new test.
lookup_symbol is often called with user input. Consequently, any
function called from lookup_symbol{,_in_language} should attempt to
deal with malformed input gracefully. After all, malformed user
input is not a programming/API error.
This patch does not attempt to find/correct all instances of this. It
only fixes locations in the code that trigger test suite failures.
This patch fixes PR breakpoints/18303, "Assertion: -breakpoint-insert
with windows paths of file in non-current directory".
The patch includes three new tests related to this. One is just
gdb.linespec/ls-errs.exp copied and converted to use C++ instead of C, and
to add a case using a file name containing a Windows-style logical drive
specifier. The others include an MI test to provide a regression test for
the specific case reported in PR 18303, and a C++ test for proper error
handling of access to a program variable when using a file scope specifier
that refers to a non-existent file.
Tested on x86_64 native Linux.
gdb/ChangeLog
2016-01-28 Keith Seitz <keiths@redhat.com>
PR breakpoints/18303
* cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
look for "::" instead of simply ":".
(cp_search_static_and_baseclasses): Return null_block_symbol for
malformed input.
Remove assertions.
* cp-support.c (cp_find_first_component_aux): Do not return
a prefix length for ':' unless the next character is also ':'.
gdb/testsuite/ChangeLog
2016-01-28 Don Breazeal <donb@codesourcery.com>
* gdb.cp/scope-err.cc: New test program.
* gdb.cp/scope-err.exp: New test script.
* gdb.linespec/ls-errs.c (myfunction): Expanded to have multiple
lines and "set breakpoint here" comment.
* gdb.linespec/ls-errs.exp: Added C++ testing and new test case.
Fixed some whitespace and format issues.
* gdb.mi/mi-linespec-err-cp.cc: New test program.
* gdb.mi/mi-linespec-err-cp.exp: New test script.
Symbols defined in PIE should be bound locally, the same as -shared
-Bsymbolic.
bfd/
PR ld/19827
* elf32-i386.c (elf_i386_check_relocs): Bind defined symbol
locally in PIE.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
ld/
PR ld/19827
* testsuite/ld-i386/i386.exp: Run PR ld/19827 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr19827.rd: New file.
* testsuite/ld-i386/pr19827a.S: Likewise.
* testsuite/ld-i386/pr19827b.S: Likewise.
* testsuite/ld-x86-64/pr19827.rd: Likewise.
* testsuite/ld-x86-64/pr19827a.S: Likewise.
* testsuite/ld-x86-64/pr19827b.S: Likewise.
If /proc is not mounted, GDB fails an assertion in find_new_threads_once:
Continuing.
.../src/gdb/linux-thread-db.c:1249: internal-error: find_new_threads_once: Assertion `!target_has_execution' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
That was supposed to catch misuses of td_ta_thr_iter, which is unsafe
for live debugging. However, if /proc is not mounted, we still
fallback to using it.
I didn't bother with a warning, because GDB already prints several
others related to failing to open /proc files.
gdb/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* linux-thread-db.c (try_thread_db_load_1): Leave
info->td_ta_thr_iter_p NULL iff debugging a live process and we
have /proc access.
(find_new_threads_once): Assert that we have a non-NULL
info->td_ta_thr_iter_p instead of checking whether the target has
execution.
On GNU/Linux archs that support displaced stepping, if /proc is not
mounted, GDB gets stuck not able to step past breakpoints:
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb) c
Continuing.
dl_main (phdr=<optimized out>, phnum=<optimized out>, user_entry=<optimized out>, auxv=<optimized out>) at rtld.c:2163
2163 LIBC_PROBE (init_complete, 2, LM_ID_BASE, r);
Cannot find AT_ENTRY auxiliary vector entry.
(gdb)
That's because GDB can't figure out where the scratch pad is.
This is a regression introduced by the earlier changes to make the
Linux native target always work in non-stop mode.
This commit makes GDB detect the case and fallback to stepping over
breakpoints in-line.
gdb/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
PR gdb/19676
* infrun.c (displaced_step_prepare): Also disable displaced
stepping on NOT_SUPPORTED_ERROR.
* linux-tdep.c (linux_displaced_step_location): If reading auxv
fails, throw NOT_SUPPORTED_ERROR instead of generic error.
gdb/doc/ChangeLog:
2016-03-15 Pedro Alves <palves@redhat.com>
Andreas Arnez <arnez@linux.vnet.ibm.com>
Marcin Kościelnicki <koriakin@0x04.net>
* gdb.texinfo (Tracepoint Actions): Document possible
unreliability of '$_ret'.
When adding the $_as_string convenience function, I missed a new test
failure in default.exp. The tests lists the convenience functions, so
$_as_string should be added to the expected list.
Fixes:
+FAIL: gdb.base/default.exp: show convenience ($_caller_is = <internal function _caller_is> not found)
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Add $_as_string to the list of expected
convenience functions.
Add a new command 'maint info line-table' to display the contents of
GDB's internal line table structure. Useful when trying to understand
problems (within gdb) relating to line tables.
gdb/ChangeLog:
* symmisc.c (maintenance_info_line_tables): New function.
(maintenance_print_one_line_table): New function.
(_initialize_symmisc): Register 'maint info line-table' command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'maint info line-table'
command.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: New tests for 'maint info line-table'.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
(s390_ax_pseudo_register_push_stack): New function.
(s390_gdbarch_init): Fill ax_pseudo_register_collect and
ax_pseudo_register_push_stack hooks.
