2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install-man, installdirs): Add DESTDIR prefix.
Index: ppc/ChangeLog
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install, installdirs): Add DESTDIR.
2003-07-23 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Make sure that dst.reg refers to the
right register byte in mova/sz.l @(dd,RnL),ERn.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
mulxs, divs and divxs.
sim/testsuite/sim/h8300/ChangeLog:
2003-07-22 Michael Snyder <msnyder@redhat.com>
* mul.s: Don't try to use negative immediate (it's always
unsigned).
* div.s: Ditto.
* utils-fpu.inc (enable_fpu, ckm_fp_cc): New macros.
(clrset_fp_cc): Fix mask used for upper 7 condition codes.
* utils-mdmx.inc: Include utils-fpu.inc.
(enable_mdmx): Use enable_fpu.
* utils-fpu.inc: New file.
* utils-mdmx.inc: New file.
* mdmx-ob.s: New file.
* mdmx-ob-sb1.s: New file.
* basic.exp: Run new mdmx-ob and mdmx-ob-sb1 tests.
* sim/mips/basic.exp (run_hilo_test): New procedure.
(models): Only list models that are included in the configuration.
(submodels): New variable, set to submodels of the above.
(mips64vr-*-elf, mips64vrel-*-elf): New configuration stanza.
Run hilo-hazard-[123].s.
(MIPS_MACH_HAS_MULT_HILO_HAZARD, MIPS_MACH_HAS_DIV_HILO_HAZARD): New.
* mips.igen (check_mt_hilo, check_mult_hilo, check_div_hilo): Provide
separate implementations for mipsIV and mipsV. Use new macros to
determine whether the restrictions apply.
* frv.c (frvbf_iacc_cut): Rework, taking rounding into account.
testsuite/
* sim/frv/fr400/scutss.cgs: Fix tests to account for rounding.
Add some new ones.
* gencode.c (table): Change from char to short.
(dumptable): Change generated table from char to short.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): char to short.
(init_dsp): Compute size of sh_dsp_table.
(sim_resume): Change jump_table from char to short.
Committed by Andrew Cagney.
* mloopx.in: Update copyright.
(xextract-pbb): Fixed trap for system calls operation in parallel.
* mloop2.in (xextract-pbb): Ditto.
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips*-*-*): Configure in testsuite.
* configure: Regenerate.
[ sim/testsuite/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* sim/mips: New directory. Tests for the MIPS simulator.
[ sim/testsuite/sim/mips/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* basic.exp: New file.
* testutils.inc: New file.
* sanity.s: New file.
* mips.igen (check_mf_cycles, check_mt_hilo, check_mf_hilo)
(check_mult_hilo): Improve comments.
(check_div_hilo): Likewise. Also, fork off a new version
to handle mips32/mips64 (since there are no hazards to check
in MIPS32/MIPS64).
* gencode.c (expand_opcode): Simplify and reorganize.
Eliminate "shift" parameter. Eliminate "4 bits at a time"
assumption. Flatten switch statement to a single level.
Add "eeee" token for even-numbered registers.
(bton): Delete.
(fsca): Use "eeee" token.
(ppi_moves): Rename to "expand_ppi_movxy". Do the ddt
[movx/movy] expansion here, as well as the ppi expansion.
(gensim_caselist): Accept 'eeee' along with 'nnnn'.
(O_RDONLY): Do not define.
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(targ-vals.h): Include it.
(translate_open_mode): Use TARGET_O_* instead of O_*.
(SWIopen): Likewise.
* Makefile.in (armos.o): Depend on targ-vals.h.
(SPR_REGNUM_MAX): Delete.
* frv.c (gdb/sim-frv.h): Include.
(frvbf_fetch_register, frvbf_store_register): Use register number
constants from gdb/sim-frv.h. Check availability of general
purpose and float registers.
* frv-sim.h (REGNUM_LR): Removed.
(REGNUM_SPR_MIN,REGNUM_SPR_MAX): New macros.
* frv.c (frvbf_fetch_register): Fetch SPR registers based on
REGNUM_SPR_MIN and REGNUM_SPR_MAX. Check whether SPRs are implemented.
Return 0 for an unimplemented register. Return the length of the data
for an implemented register.
(frvbf_store_register): Ditto.
* h8300/compile.c : Addition of extern variable h8300_normal_mode
(SP) : Handle normal mode
(bitfrom) : Use normal mode flag to return suitable value
(lvalue) : Use normal mode flag to return command line location
(decode) : Decode instruction correctly for normal mode
(init_pointers) : Initialise memory correctly for normal mode
(sim_resume) : Handle cases for normal mode using h8300_normal_mode flag
(sim_store_register) : Handle 2 byte PC for normal mode
(sim_fetch_register) : Handle 2 byte PC for normal mode
(set_h8300h) : Set normal mode flag as per architechture
(sim_load) : Allocate 64K for normal mode instead of bigger memory
* callback.h (struct host_callback_struct): New members ftruncate
and truncate.
gdb:
sim/common:
* callback.c (os_ftruncate, os_truncate): New functions.
(default_callback): Initialize ftruncate and truncate members.
sim/sh:
* syscall.h (SYS_truncate, SYS_ftruncate): Define.
* interp.c (trap): Add support for SYS_ftruncate and SYS_truncate.
* sim/frv/testutils.inc (or_gr_immed): New macro.
* sim/frv/fp_exception-fr550.cgs: Write insns using
unaligned registers into the program in order to
cause the required exceptions.
* sim/frv/fp_exception.cgs: Ditto.
* sim/frv/regalign.cgs: Ditto.
* sim/frv/fr550: New subdirectory.
* sim/frv/fr400/*.cgs: Add fr550 as appropriate.
* sim/frv/fr500/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*-fr550.cgs: New test cases for fr550.
* profile.h (update_FR_ptime): New prototype.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): Ditto.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(post_wait_for_SPR): Ditto.
* profile.c (update_FR_ptime): Moved here from profile-fr500.c.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): New function.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(vliw_wait_for_fdiv_resource): Correct resource name.
(vliw_wait_for_fsqrt_resource): Ditto.
(post_wait_for_SPR): New function.
* profile-fr500.c (frvbf_model_fr500_u_commit): New function.
(frvbf_model_fr500_u_gr2fr): Pass out_FRk as output register to
adjust_float_register_busy.
(frvbf_model_fr500_u_gr_load): Record latency of SPR registers.
(frvbf_model_fr500_u_fr_load): Wait for and record latency of SPR
registers.
(frvbf_model_fr500_u_float_arith): Ditto.
(frvbf_model_fr500_u_float_dual_arith): Ditto.
(frvbf_model_fr500_u_float_div): Ditto.
(frvbf_model_fr500_u_float_sqrt): Ditto.
(frvbf_model_fr500_u_float_convert): Ditto.
(update_FR_ptime): Moved to profile.c
(update_FRdouble_ptime): Moved to profile.c
* profile-fr400.c (update_FR_ptime): Removed. Identical to functions
for other machines.
(update_FRdouble_ptime): Ditto.
* arch.h,cpu.h,sem.c,decode.[ch],model.c,sem.c: Regenerated.
* registers.c (frv_check_spr_read_access): Check for access to
ACC4-ACC63 and ACCG4-ACCG63.
* profile.h (frv-desc.h): #include it.
(spr_busy): New member of FRV_PROFILE_STATE.
(spr_latency): Ditto.
(GNER_FOR_GR): New macro.
(FNER_FOR_FR): New maccro.
(update_SPR_latency): New function.
(vliw_wait_for_SPR): New function.
* profile.c (profile-fr550.h): #include it.
(update_latencies): Update SPR latencies.
(update_target_latencies): Ditto.
(update_SPR_latency): New function.
(vliw_wait_for_SPR): New function.
* profile-fr500.c (frvbf_model_fr500_u_idiv): Record GNER latency.
(frvbf_model_fr500_u_trap): Removed unused variable, ps.
(frvbf_model_fr500_u_check): Ditto.
(frvbf_model_fr500_u_clrgr): New unit modeller for fr500.
(frvbf_model_fr500_u_clrfr): Ditto.
(frvbf_model_fr500_u_spr2gr): Wait for SPR.
(frvbf_model_fr500_u_gr2spr): Ditto.
* frv-sim.h (H_SPR_ACC4): New macro.
(H_SPR_ACCG4): New macro;
(H_SPR_ACC0): Removed.
(H_SPR_ACCG0): Removed.
* arch.h,model.c,sem[ch],decode.[ch]: Regenerated.
* profile.c (slot_names): FM1 was listed twice. Changed first
instance to FM0. Added IALL, FMALL and FMLOW.
(print_parallel): Don't examine slots with no insns.
On behalf of Doug Evans <dje@sebabeach.org>
* Makefile.in (stamp-arch,stamp-cpu): Pass archfile to cgen.
Remove copying of .cpu file to cgen/cpu, no longer needed.
On behalf of Doug Evans <dje@sebabeach.org>
* cgen.sh: New arg archfile.
* Make-common.in (cgen-arch,cgen-cpu,cgen-defs,cgen-decode,
cgen-cpu-decode,cgen-desc): Update call to cgen.sh.
* sim/frv/interrupts/Ipipe-fr400.cgs: New file.
* sim/frv/interrupts/Ipipe-fr500.cgs: New file.
* sim/frv/interrupts/Ipipe.cgs: Remove (replaced by above).
Dave Brolley <brolley@redhat.com>
* frv/: New directory, simulator for the Fujitsu FR-V.
* testsuite/frv-elf/: New directory.
* testsuite/sim/frv/: New directory.
* configure.in: Add frv configury.
* configure: Regenerate.
2003-08-28 Andrew Cagney <cagney@redhat.com>
* dv-glue.c (hw_glue_finish): Change %d to %ld to match sizeof.
* sim-options.c (print_help): Cast the format with specifier to
"int".
Index: mn10300/ChangeLog
2003-08-28 Andrew Cagney <cagney@redhat.com>
* dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
"long".
(read_status_reg): Cast "serial_reg" to "long".
* dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
"long".
(do_counter6_event, write_mode_reg, write_tm6md): Ditto.
* sim/sh/gencode.c ( tab[] ): Addition of MAC.L handler and
correction for MAC.W handler
* sim/sh/interp.c ( macl ): New Function. Implementation of
MAC.L handler.
* MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
maintenance. List igen and sh maintainers. Mention that target
and global maintainers pick up the slack.
the physical address in virtual address.
(struct _sim_cpu): Add memory bank members.
* m68hc11_sim.c (cpu_initialize): Clear memory bank parameters.
* interp.c (sim_hw_configure): Create memory bank according to memory
bank parameters.
(sim_get_bank_parameters): New function to obtain memory bank config
from the symbol table.
(sim_prepare_for_program): Call it to obtain the memory bank parameters.
(sim_open): Call sim_prepare_for_program.
* dv-m68hc11.c (m68hc11cpu_io_write_buffer): Use memory bank parameters
to check if address is within bank window.
(m68hc11cpu_io_read_buffer): Likewise.
(attach_m68hc11_regs): Map the memory bank according to memory bank
parameters.
* cmpw.s: Add test for less-than-zero immediate.
* shll.s: Test for shll reg, reg.
* shlr.s: Test for shlr reg, reg.
* mova.s: Add dozens of new mova tests.
* compile.c (decode): Enhancements for mova.
Initialize cst, reg, and rdisp inside the loop, for each
new instruction. Defer correction of the disp2 values until
later, and then adjust them by the size of the first operand,
rather than the size of the instruction.
(sim_resume): For mova, adjust the size of the second operand
according to the type of the first operand (INDEXB vs. INDEXW).
In cases where there is only one operand, the other two must
both be composed on the fly.
* gencode.c (pshl): Change < to <= (shift by 16 is allowed).
Cast argument of >> to unsigned to prevent sign extension.
(psha): Change < to <= (shift by 32 is allowed).
* gencode.c: A few more fix-ups of refs and defs.
(frchg): Raise SIGILL if in double-precision mode.
(ldtlb): We don't simulate cache, so this is a no-op.
(movsxy_tab): Correct a few bit pattern errors.
* gencode.c (ppi_gensim): For a conditional ppi insn, if the
condition is false, we want to return (not break). A break
will take us to the end of the function where registers will
be updated, whereas the desired outcome is for nothing to change.
* gencode.c (op tab): Some fix-ups of refs and defs.
(ocbi, ocbp): Cache not simulated, but may cause memory fault.
(gensym_caselist): Add default case to switch statement.
(expand_ppi_code): Add default case to switch statement.
