* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): Initialize the symbol language to auto
instead of unknown, so it will try to demangle the symbol.
* symtab.h (OPNAME_PREFIX_P): Change operator prefix to correct value.
* symtab.c (gdb_mangle_name): Properly handle C++ operators.
Adjust call_dummy_breakpoint_offset, so that `finish' after a stop
in a call dummy works.
(sparc_gdbarch_init): Fix setting of pc_in_call_dummy, it depends
on SPARC32/64_CALL_DUMMY_ON_STACK, not DO_CALL_DUMMY_ON_STACK.
* remote.c (putpkt_binary): Call read_frame, not getpkt. Log message.
(read_frame): Do not call error() on communication error when
reading checksum, but return failure instead and log message.
* varobj.c (type_changeable): Arrays are not changeable.
Trying to check for updates was causing an error if the array lived
in a register as gdb value_equal() cannot handle that case yet.
* varobj.c (varobj_update): Prevent uninitialized error code to be
returned on type_changed. Also, prevent value_equal() to be called
for the types we do not want to test for updates.
From Grant Edwards <grante@visi.com>
This keeps the GUI alive while running an RDI target and lets the
STOP button be used to stop the target.
* remote-rdi.c (arm_rdi_stop): New function. Implements target_stop.
(init_rdi_ops): Set to_stop target vector entry to the above.
* rdi-share/ardi.c (stop_request): New variable. Tells when a stop
has been requested.
(angel_RDI_stop_request): New function. Registers that a stop has
been requested.
(angel_RDI_ExecuteOrStep): Add call to ui_loop_hook() in loop that
waits while target is executing. Initialize and reset stop_request.
* rdi-share/ardi.h: Add declaration of angel_RDI_stop_request().
From Daniel Berlin <dberlin@redhat.com> :
* symtab.h (SYMBOL_INIT_DEMANGLED_NAME): Initialize the symbol
language to auto instead of unknown, so it will try to demangle
the symbol.
* symtab.h (OPNAME_PREFIX_P): Change operator prefix to correct value.
* symtab.c (gdb_mangle_name): Properly handle C++ operators.
From Daniel Berlin <dberlin@redhat.com> :
* symtab.c (lookup_symbol_aux): New function. Renamed from
lookup_symbol. Move code to do demangling/case sensitivity to
lookup_symbol().
(lookup_symbol): Now wrapper for lookup_symbol_aux, so we can
perform case sensitivity/demangling without leaking memory. Move
code to do demangling/case sensitivity from old_lookup_symbol to
here.
(lookup_partial_symbol): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME.
(lookup_block_symbol): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME. Don't do linear search in case of C++.
* symfile.c (compare_symbols): Use SYMBOL_SOURCE_NAME instead of
SYMBOL_NAME.
(compare_psymbols): Same here.
for call dummy instead of accessing stop_stack_dummy, which does
not work if we `return' from a stop in a call dummy.
(rs6000_gdbarch_init): Use generic_save_dummy_frame_tos for
dummy_frame_tos function to make PC_IN_CALL_DUMMY work.
OLD_CANNOT_FETCH_REGISTER): New definitions for accessible registers
when accessing the registers via the U area.
(fetch_register, store_register): Use them.
(cannot_fetch_register, cannot_store_register): New functions,
all registers should be accessible if we have GETREGS support.
* config/i386/nm-linux.h: Use cannot_fetch/store_register for
CANNOT_FETCH/STORE_REGISTER definitions.
(lin_lwp_wait): Block SIGCHLD here if it isn't already blocked.
(lin_lwp_mourn_inferior): Restore the origional signal mask, and
reset the mask of blocked signals.
(_initialize_lin_lwp): Don't block SIGCHLD here, but do initialize
suspend_mask and blocked_mask. This makes us pass
gdb.base/sigall.exp for Linux/x86 now.
(lin_thread_get_thread_signals): Treat the LinuxThreads "cancel"
signal similarly to SIGCHLD in the generic code. Avoids GDB being
terminated by a Real-time signal.
* i386nbsd-nat.c (i386nbsd_use_struct_convention): Moved from here.
* i386nbsd-tdep.c (i386nbsd_use_struct_convention): To here.
* i386nbsd-tdep.c: New file.
* remote-rdi.c (voiddummy): Update function signature to match
struct Dbg_HostosInterface's reset method.
* remote-rdp.c (rdp_step): Fix handle parameter to
remote_rdp_insert_breakpoint and remote_rdp_remove_breakpoint.
* arm-tdep.c (SIGCONTEXT_REGISTER_ADDRESS_P): Provide default
definition.
(arm_init_extra_frame_info): Use.
* c-typeprint.c (c_typedef_print): remove (replaced by typedef_print in
typeprint.c).
* typeprint.c (typedef_print): new function. (old c_typedef_print
function with pascal language support added).
* value.h (c_printdef_print): removed.
(typedef_print): declare.
* symtab.c (print_symbol_info): call to c_typedef_print replaced by
call to typedef_print.
GET_THREAD_SIGNALS): New defines.
* config/i386/linux.mh (NATDEPFILES): Remove lin-thread.o and
linux-threads.o. Add proc-service.o, thread-db.o and lin-lwp.o.
* proc-service.c: New file.
* thread-db.c: New file.
* lin-lwp.c: New file.
Protect against multiple inclusion.
Add fix for broken prfpregset_t here.
(struct ps_prochandle): Declare here.
[HAVE_PROC_SERVICE_H]: Include <proc_service.h>.
[!HAVE_PROC_SERVICE_H]: Include "gregset.h", define prgregset_t
and prfpregset_t in terms of gdb_gregset_t and gdb_fpregset_t if
necessary.
* lin-thread.c: Unconditionally include "gdb_proc_service.h".
Remove fix for broken prfpregset_t here.
(struct ps_prochandle): Don't declare here.
lines up under the data vector.
* dcache.c (dcache_read_line): New function.
(dcache_peek_byte): Use it.
(dcache_alloc): Return NULL if write of reclaimed cache line fails.
(dcache_peek_byte, dcache_poke_byte): Return failure if
dcache_alloc() returns a NULL data block pointer.
(dcache_xfer_memory): Don't force writeback unless we were writing.
* monitor.c (monitor_expect): Change places where immediate_quit
is set to 1 or 0 to increments and decrements respectively. This
allows such changes to nest properly.
* ocd.c (ocd_start_remote): Likewise.
* remote-adapt.c (expect): Likewise.
* remote-array.c (expect): Likewise.
* remote-eb.c (expect): Likewise.
* remote-e7000.c (e7000_start_remote): Likewise.
* remote-mips.c (mips_expect_timeout, mips_getstring): Likewise.
* remote-nrom.c (expect): Likewise.
* remote-os9k.c (expect): Likewise.
* remote-sds.c (sds_start_remote): Likewise.
* remote-st.c (expect): Likewise.
* remote-utils.c (sr_expect): Likewise.
* remote.c (remote_start_remote): Likewise.
* tracepoint.c (read_actions): Likewise.
* remote-mips.c (mips_getstring): Balance changes to immediate_quit.
* valops.c (value_cast): Indentation fix-up.
* acconfig.h (HAVE_PRGREGSET32_T, HAVE_PRFPREGSET32_T,
HAVE_STRUCT_LINK_MAP32): New configure macros.
* config.in: Ditto.
* configure.in: Test for the above new macros.
* breakpoint.c: Update copyright date.
* core-sol2.c: Include v9/sys/privregs.h directly to
work around a bug in Sun's Solaris 8 header files.
(fetch_core_registers): Use the above new configure macros to
handle cross-debugging of 32-bit core files on a 64-bit host.
* sol-thread.c (ps_pdmodel) New function.
(rw_common): For debugging of 32-bit apps on a 64-bit host,
truncate addresses to 32 bits.
* solib.c (solib_extract_address): Functionize. Make 32/64 aware.
(LM_ADDR, LM_NEXT, LM_NAME): Ditto.
(IGNORE_FIRST_LINK_MAP): Ditto.
(first_link_map_member): Make 32/64 aware.
(open_symbol_file_object): Ditto.
(current_sos): Ditto.
* i386-linux-nat.c (i386_linux_skip_solib_resolver,
skip_hurd_resolver, find_minsym_and_objfile): Move these
solib functions into i386-linux-tdep.c for cross debugging.
* i386-linux-tdep.c: Receive the above functions.
argument if it is missing an extension.
* corelow.c: Define O_BINARY if it isn't defined.
(core_open): Open core file in binary mode.
* config/i386/tm-cygwin.h (child_clear_solibs): Rename from child_clear_solib.
* config/i386/cygwin.mh: Add dependency from corelow.o.
* win32-nat.c (register_loaded_dll): New function. Add dll to the list of
currently loaded dlls.
(handle_load_dll): Use register_loaded_dll.
(child_solib_add): Distinguish between active process and core targets.
(solib_symbols_add): Load symbols from loaded dll.
(core_dll_symbols_add): New function. Load symbols from dll referenced in
core.
(core_section_load_dll_symbols): New function.
(dll_code_sections_add): New function.
(map_single_dll_code_section): New function.
(fetch_elf_core_registers): New function.
(_initialize_core_win32): New function.
* symtab.c (search_symbols): Fix off by one error in index for
initializing variables ourtype, ourtype2, ourtype3, and ourtype4.
(symtab_symbol_info): fix similar off by one error.
Fri Aug 25 12:03:15 2000 David Taylor <taylor@texas.cygnus.com>
* gdbarch.sh (TARGET_ADDR_BIT): New macro for the number
of bits in gdb's representation of a target address.
* gdbarch.c, gdbarch.h: Regenerated.
* gdbtypes.c (build_gdbtypes): Use TARGET_ADDR_BIT instead of
TARGET_PTR_BIT when initializing builtin_type_CORE_ADDR.
* printcmd.c (print_address_numeric): Use TARGET_ADDR_BIT instead
of TARGET_PTR_BIT, because we're printing an address, not a pointer.
* i386-linux-nat.c: Various doc fixes. Include "i387-nat.h".
(GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES.
(have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs.
(convert_to_gregset): Removed. Moved logic to ...
(fill_gregset): ... here. Simplified function.
(fetch_regs): Use perror_with_name for error reporting.
(store_regs): Add `regno' parameter. Use perror_with_name for
error reporting. Call fill_gregset instead of convert_to_gregset.
(FPREG_ADDR): Remove.
(supply_fpregset): Implement by calling i387_supply_fsave.
(convert_to_fpregset): Remove.
(fill_fpregset): Implement by calling i387_fill_fsave.
(fetch_fpregs): Use perror_with_name fro error reporting.
(store_fpregs) Add `regno' parameter. Use perror_with_name fro
error reporting. Call fill_fpregset instead of
convert_to_fpregset.
(supply_xfpregset, convert_to_xfpregset): Removed.
(supply_fpxregset, fill_fpxregset): New functions.
(fetch_fpxregs): Renamed from fetch_xfpregs. Use perror_with_name
for error reporting. Call supply_fpxregset instead of
supply_xfpregset.
(store_xfpregs): Removed.
(store_fpxregs): New function.
(fetch_inferior_registers): Adjust for xfp -> fpx change. Tweak
message in call to internal_error.
(store_inferior_registers): Adjust for xfp ->fpx change. Pass
REGNO to store_regs, store_fpregs and store_fpxregs.
(fetch_core_registers): Adjust for xfp -> fpx change.
* acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from
HAVE_PTRACE_GETXFPREGS.
* config.in: Regenerated.
* configure.in: Replace check for PTRACE_GETXFPREGS with check for
PTRACE_GETFPXREGS. Remove comment about Cygnus SSE extensions.
* configure: Regenerated.
* config/i386/linux.mh (NATDEPFILES): Add i387-nat.o.
* config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on
HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.
* c-lang.c: Set case sensitivity on for c_language_defn,
cplus_language_defn, and asm_language_defn.
* ch-lang.c: Set case sensitivity on for chill_language_defn.
* f-lang.c: Set case sensivitity off for f_language_defn.
* jv-lang.c: Set case sensitivity on for java_language_defn.
* language.h: Add enum case_mode, case_sensitivity.
* language.c: Define case_mode, case_sensitivity. Set case
sensitivity on for unknown_language_defn, auto_language_defn,
and local_language_defn.
(show_case_command,set_case_command,set_case_str): New static func.
(set_type_range_case): New static func, replaces set_type_range ().
(set_language_command,set_type_command,set_range_command,set_language):
Call set_type_range_case ().
(language_info): Print case sensitivity setting.
(_initialize_language): Add set/show commands for 'case-sensitive'.
Set default case mode 'auto'. Set default language 'auto'.
* m2-lang.c: Set case sensitivity on for m2_language_defn.
* p-lang.c: Set case sensitivity on for pascal_language_defn.
* scm-lang.c: Set case sensitivity off for scm_language_defn.
* symtab.c (lookup_symbol): Downcase symbol name if case sensivitity
is off.
invalidate it rather than creating another.
* ocd.c (ocd_open): Likewise.
* remote-nindy.c (nindy_open): Likewise.
* remote-sds.c (sds_open): Likewise.
* remote-utils.c (gr_open): Likewise.
* remote.c (remote_open_1, remote_cisco_open): Likewise.
* dcache.c (dcache_alloc): Changed to take address of line as an
argument, and to invalidate cache line before returning.
(dcache_peek_byte): Updated.
(dcache_poke_byte): Updated.
-------------------------------------------------------------------
(i387_supply_fxsave, i387_fill_fxsave): New prototypes.
* i387-nat.c (i387_supply_fsave): Declare `val' as `unsigned int'.
(fxsave_offset): New variable.
(FXSAVE_ADDR): New macro.
(i387_supply_fxsave, i387_fill_fxsave, i387_tag): New functions.
* objfiles.h (SECT_OFF_BSS): Don't detect invalid sect_index_bss
here, let the users of the macro do it.
* symtab.h (ANOFFSET): Detect here if the section index is not
initialized.
* xcoffread.c (find_targ_sec): Don't treat .bss as special,
because some objfiles may not have that section at all.
* coffread.c (cs_to_section): Ditto.
* elfread.c (elf_symtab_read): Detect an uninitialized index
value.
(elfstab_offset_sections): The macro ANOFFSET cannot be used as an
lvalue anymore.
* remote.c (get_offsets, remote_cisco_objfile_relocate): Don't use
ANOFFSET as an lvalue.
* objfiles.c (objfile_relocate, objfile_relocate): Don't use
ANOFFSET as an lvalue.
* symfile.c (default_symfile_offsets): Don't use ANOFFSET as an
lvalue.
(safe_symbol_file_add_cleanup): Reset stdout to saved stdout, not stderr.
(dll_symbol_command): Pass OBJF_USERLOADED to safe_symbol_file_add.
(get_child_debug_event): Always reset last_sig. Always reset inferior pid
appropriately.
(do_initial_child_stuff): New function. Called when attaching or starting a
new inferior process.
(child_attach): Use do_initial_child_stuff.
(child_create_inferior): Ditto.
* config/i386/cygwin.mh (NAT_FILE): Set to modern location.
* config/i386/tm-cygwin.h: Define ATTACH_NO_WAIT.
it to GDB's current directory.
(go32_create_inferior, init_go32_ops): Initialize child_cwd[] to
an empty string, to signal an uninitialized value.
From Robert Hoehne <robert.hoehne@gmx.net>.
function signatures so that they match catch_errors and
make_cleanup callbacks.
* tracepoint.c (encode_actions): Fix arguments passed to
stringify_collection_list.
* sh-tdep.c (sh_push_arguments): Make header match prototype.
* remote-e7000.c (e7000_start_remote): Use void *, not char * as
parameter to avoid compiler warning.
(fetch_regs_from_dump): Call get_hex() with the correct number of
parameters.
* sh-tdep.c (sh_gdbarch_init): For sh4 initialize
register_convert_to_raw, register_convert_to_virtual,
register_convertible.
(sh_sh4_register_convertible): New function.
(sh_sh4_register_convert_to_virtual): New function.
(sh_sh4_register_convert_to_raw): New function.
Include floatformat.h.
* configure.tgt: Recognize the 68hc11.
* m68hc11-tdep.c: New file for 68hc11 target.
* config/m68hc11/m68hc11.mt: New file for 68hc11 port.
* configure.tgt: When 68hc11, set gdb_multi_arch.
* sh-tdep.c (sh_sh4_register_name, sh_sh4_register_byte,
sh_sh4_register_raw_size, sh_sh4_register_virtual_type,
sh_fetch_pseudo_register, sh_store_pseudo_register,
sh_do_pseudo_register, sh_gdbarch_init): Fix names for pseudoregs,
they should be numbered as drx fvy where x and y are multiples of
2 and 4 respectively.
* config/sh/tm-sh.h: Fix names of pseudo regs.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add sh4 specific
pseudo registers.
(DO_REGISTERS_INFO): Define.
* sh-tdep.c (sh_sh4_register_name): New function.
(sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update
signature.
(sh_show_regs_command): New function. Actual function called by
the 'regs' command.
(sh_register_byte): Rename to...
(sh_default_register_byte): ...New function.
(sh_sh4_register_byte): New function.
(sh_register_raw_size): Rename to...
(sh_default_register_raw_size): ...New function.
(sh_sh4_register_raw_size): New function.
(sh_sh4_register_virtual_type): New function.
(sh_sh4_build_float_register_type): New function.
(sh_fetch_pseudo_register, sh_store_pseudo_register): New
functions.
(fv_reg_base_num, dr_reg_base_num): New functions.
(do_fv_register_info, do_dr_register_info, sh_do_pseudo_register,
sh_do_fp_register, sh_do_register, sh_print_register,
sh_do_registers_info): New functions.
(sh_gdbarch_init): Initialize sh4 pseudo registers to -1. Update
architecture specific parts.
(_initialize_sh_tdep): Use sh_show_regs_command for 'regs' command.
read_comp_unit_head() and ``struct compu_unit_head'' parameter.
Include support for signed address case.
Fixes problem of global address size / sign being out-of-sync with
with current section.
* config/i386/tm-i386.h: treat PC and FP as unsigned.
(SAVED_PC_AFTER_CALL): Use read_memory_unsigned_integer.
(FRAME_SAVED_PC): Ditto.
(FRAME_CHAIN): Ditto.
* rs6000-tdep.c (DEFAULT_LR_SAVE): Move to config/*/tm-*.h.
(rs6000_gdbarch_init): Use generic_pc_in_call_dummy instead of
rs6000_pc_in_call_dummy.
* config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Move here from
rs6000-tdep.c.
* config/powerpc/tm-ppc-eabi.h: Remove various definitions
handled by multi-arched rs6000-tdep.c.
* regcache.c (registers_changed, registers_fetched): Use
ARCH_NUM_REGS directly, eliminating an unnecessary variable.
This change adds pseudo-register capability to GDB.
Pseudo-registers are handled like registers, but they
don't come from or live on the target. They may be
aliases for an existing register, or they may be computed.
* defs.h (NUM_PSEUDO_REGISTERS): Define default of zero.
(ARCH_FETCH_PSEUDO_REGISTERS): Define default of no-op.
(ARCH_STORE_PSEUDO_REGISTERS): Define default of no-op.
# regcache.c (registers_changed): Mark pseudo-registers
invalid, as well as real registers.
(registers_fetched): Do not mark pseudo-registers as fetched
at the same time as other (real) registers.
(read_register_bytes): Fetch pseudo-registers (if any) from
the target architecture module instead of from the target.
(read_register_gen): Ditto.
(read_register): Ditto.
(write_register_bytes): Store pseudo-registers (if any) to
the target architecture module instead of to the target.
(write_register_gen): Ditto.
(write_register): Ditto.
(build_regcache): Allocate enough register_valid space for
pseudo-registers as well as normal (real) ones.
all old style K&R function definitions to ISO-C.
(struct gdbarch_tdep): Add mips_abi_string.
(mips_gdbarch_init): Initialize.
(mips_dump_tdep): Print mips_abi_string and other values.
(mips_push_arguments): Add more detailed tracing.
16 byte boundary. Align allocated argument space using
MIPS_STACK_ARGSIZE. Reserve space on stack for the struct return
and floating-point registers. Use fp_register_arg_p to determine
if float_argreg should be aligned.
* config/sh/tm-sh.h (STORE_RETURN_VALUE): Redefine as
sh_store_return_value().
* sh-tdep.c (sh_store_return_value): New function. Store the
value returned by a function into the appropriate register.
2000-07-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* sh-tdep.c (sh_skip_prologue): Before looking at the actual
instructions, try to see if the symbol table can be of help, by
calling after_prologue(). If this doesn't work, call
skip_prologue_hard_way().
(skip_prologue_hard_way): Renamed from sh_skip_prologue. Add some
more instruction pattern matching for pushing of arguments, and
manipulation of r14.
(after_prologue): New function. Use symbol table info to determine
the end of the prologue, if possible.
equivalence.
(rank_one_type): Use strcmp instead of == to compare type names.
Don't swap parm with arg when checking TYPE_CODE_REF types.
* valops.c (find_overload_match): Fix indentation. Compare
parameter rankings to 0..9, 10..99, and 100+ instead of 0, 10,
and 100.
Committed by Elena Zannoni <ezannoni@cygnus.com>
* sh-tdep.c (sh_skip_prologue): Change prologue matching for modern
compilers.
(sh_frame_find_saved_regs): Ditto.
(sh_find_callers_reg): Stop if pc is zero.
(nindy_xfer_inferior_memory): Use dcache_xfer_memory() instead of
breaking transfer into chunks and using nindy_fetch_word() and
nindy_store_word().
* remote-bug.c (bug_xfer_memory): Use dcache_xfer_memory() instead
of breaking transfer into chunks and using gr_fetch_word() and
gr_store_word().
* remote.c (remote_fetch_word, remote_store_word): Removed.
* remote-utils.h (gr_fetch_word, gr_store_word): Removed.
* remote-utils.c (gr_fetch_word, gr_store_word): Removed.
* dcache.h (dcache_fetch, dcache_poke, dcache_poke_block): Removed.
* dcache.c (dcache_fetch, dcache_poke): Removed.
support. Incorporate most of tm-rs6000.h.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
(read_memory_addr): Define.
(pop_frame): Rename to rs6000_pop_frame.
(rs6000_pop_frame, rs6000_fix_call_dummy, rs6000_push_arguments,
rs6000_frame_saved_pc, rs6000_frame_chain): Remove non-generic
dummy frame handling.
(branch_dest, rs6000_pop_frame, rs6000_skip_trampoline_code,
rs6000_frame_saved_pc, frame_get_saved_regs,
frame_initial_stack_address, rs6000_frame_chain,
rs6000_convert_from_func_ptr_addr): Call read_memory_addr instead
of read_memory_integer.
(branch_dest, rs6000_pop_frame, rs6000_push_arguments,
rs6000_skip_trampoline_code, rs6000_frame_saved_pc,
frame_get_saved_regs, frame_initial_stack_address,
rs6000_frame_chain): Replace 4 with TDEP->wordsize.
(skip_prologue): Recognize some 64-bit stack adjustments.
(push_dummy_frame, pop_dummy_frame, set_processor,
show_processor): Delete.
(frame_get_saved_regs): Manipulate saved register addresses using
CORE_ADDR instead of int.
(rs6000_create_inferior): New function.
(register_names_*[]): Change to struct reg registers_*[].
(variants[]): Assimilate into multi-arch approach.
(register_names_*[], variants[]): Refer to pre-PowerPC
architectures as POWER instead of RS6000.
* rs6000-nat.c: Ubiquitous changes for 64-bit support.
(vmap_secs, xcoff_relocate_symtab): Cast addresses
to unsigned long to avoid sign-extension errors.
(set_host_arch): New function.
(xcoff_relocate_symtab): Try disabling usleep(36000) workaround.
(rs6000_core_fns): Use new bfd_target_xcoff_flavour.
(_initialize_core_rs6000): Initialize rs6000_set_host_arch_hook.
* symfile.c (find_sym_fns): Remove special xcoff kludge.
* xcoffread.c (secnum_to_bfd_section): Initialize args.objfile.
(process_linenos): Query line struct size from coff
backend instead of using compile-time constant.
(enter_line_range): Likewise.
(read_xcoff_symtab): Pass "XCOFF64" instead of "XCOFF" to
record_debugformat() if appropriate.
(process_xcoff_symbol): Access symbol addresses using
SYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE.
(read_symbol_lineno): Retrieve XCOFF64 symbol names from strtbl.
(scan_xcoff_symtab): Likewise. Query syment struct size from
coff backend instead of using compile-time constant.
(xcoff_sym_fns): Set flavour to bfd_target_xcoff_flavour.
* Makefile.in (INTERNAL_LDFLAGS): Add $(MH_LDFLAGS) to list of flags
that this Makefile variable get set to. (From Kevin Buettner.)
* config/powerpc/aix.mh (MH_LDFLAGS): Add linker flags so that
the TOC doesn't overflow. (From Kevin Buettner.)
* config/powerpc/tm-ppc-aix.h: Move config decisions to
multi-arched rs6000-tdep.c.
* config/rs6000/tm-rs6000.h: Likewise.
(GDB_MULTI_ARCH): Define.
(skip_trampoline_code): Rename to rs6000_skip_trampoline_code.
(is_magic_function_pointer): Replace with
rs6000_convert_from_func_ptr_addr.
(TARGET_CREATE_INFERIOR_HOOK): Define.
(find_toc_address_hook): Rename to rs6000_find_toc_address_hook.
(rs6000_set_host_arch_hook): Declare.
* config/rs6000/nm-rs6000.h (CHILD_XFER_MEMORY): Define.
(FIX_CALL_DUMMY): Redefined to call i386_fix_call_dummy.
(i386_fix_call_dummy): Add prototype.
* i386-tdep.c (i386_fix_call_dummy): New function based on the
code from the old FIX_CALL_DUMMY macro.
here.
(safe_symbol_file_add_stub): Redirect gdb_stdout as well as stderr.
(safe_symbol_file_add_cleanup): Restore gdb_stdout.
(info_dll_command): Use the pager for displaying DLLs since there are often
quite a few.
