Extend the address modifier parsing to distinguish between the
modifers used in LDR literal and LDR register offset address modes.
The current parser incorrectly accepts the :got: modifier on a
register offset instruction resulting in silent corruption of the
output binary.
The current implementation of the :got: assembler modifier does not
distinguish the ADR and ADRP instruction. The :got: modifier does not
make sense on and ADR instruction and should be error'd rather than
the current behavior of applying an inappropriate relocation to the
output and scrambling the underlying instruction silently.
Add support to objdump for dumping the .avr.prop section in a structured
way.
binutils/ChangeLog:
* od-elf32_avr.c: Add elf32-avr.h include.
(OPT_AVRPROP): Define.
(options[]): Add 'avr-prop' entry.
(elf32_avr_help): Add avr-prop help text.
(elf32_avr_dump_avr_prop): New function.
(elf32_avr_dump): Add check for avr-prop.
bfd/ChangeLog:
* elf32-avr.h (struct avr_property_header): New strucure.
(avr_elf32_load_property_records): Declare.
(avr_elf32_property_record_name): Declare.
* elf32-avr.c: Add bfd_stdint.h include.
(retrieve_local_syms): New function.
(get_elf_r_symndx_section): New function.
(get_elf_r_symndx_offset): New function.
(internal_reloc_compare): New function.
(struct avr_find_section_data): New structure.
(avr_is_section_for_address): New function.
(avr_find_section_for_address): New function.
(avr_elf32_load_records_from_section): New function.
(avr_elf32_load_property_records): New function.
(avr_elf32_property_record_name): New function.
gas/testsuite/ChangeLog:
* gas/avr/avr-prop-1.d: New file.
* gas/avr/avr-prop-1.s: New file.
Adds support to the assembler to write out data for tracking the use of
.org and .align directives. This data is collected within the assembler
and written out to a section ".avr.prop" (if there's anything to write
out).
This patch does not add any tests. The next patch in this series will
add a better mechanism for visualising the contents of .avr.prop which
will make writing tests much easier.
This patch also does not make any use of this collected data, that will
also come along in a later patch; the intended consumer is the linker,
during linker relaxation this information will be used to ensure that
the .org and .align directives are honoured.
bfd/ChangeLog:
* elf32-avr.h (AVR_PROPERTY_RECORD_SECTION_NAME): Define.
(AVR_PROPERTY_RECORDS_VERSION): Define.
(AVR_PROPERTY_SECTION_HEADER_SIZE): Define.
(struct avr_property_record): New structure.
gas/ChangeLog:
* config/tc-avr.c: Add elf32-avr.h include.
(struct avr_property_record_link): New structure.
(avr_output_property_section_header): New function.
(avr_record_size): New function.
(avr_output_property_record): New function.
(avr_create_property_section): New function.
(avr_handle_align): New function.
(exclude_section_from_property_tables): New function.
(create_record_for_frag): New function.
(append_records_for_section): New function.
(avr_create_and_fill_property_section): New function.
(avr_post_relax_hook): New function.
* config/tc-avr.h (md_post_relax_hook): Define.
(avr_post_relax_hook): Declare.
(HANDLE_ALIGN): Define.
(avr_handle_align): Declare.
(strut avr_frag_data): New structure.
(TC_FRAG_TYPE): Define.
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
PR 17940
* dwarf2dbg.c (out_header): When generating dwarf sections use
real symbols not temps for the start and end symbols.
* config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
adjustments to relocations in debug sections.
(TC_LINKRELAX_FIXUP): Likewise.
* elf32-msp430.c (msp430_elf_relax_delete_bytes): Adjust debug
symbols at end of sections. Adjust function sizes.
While actually starting to use that new directive, I noticed a few
oversights of the original commit.
gas/
2015-02-06 Jan Beulich <jbeulich@suse.com>
* dw2gencfi.c (select_cie_for_fde): Also bail on CFI_label.
(cfi_change_reg_numbers): Also do nothing for CFI_label.
(cfi_pseudo_table): Also handle .cfi_label when not supporting
CFI directives.
gcc-5 correctly complains "loop exit may only be reached after
undefined behavior". I was going to correct this by checking the
index before dereferencing the array rather than the other way around,
but then I noticed it is possible for extract_cmd to write the
terminating zero one past the end of "cmd". Fixing that means no
index check is needed in md_assemble.
* config/tc-msp430.c (md_assemble): Correct size passed to
extract_cmd. Remove index check.
Relaxable fragments can be relaxed when there are alignment requirements.
Besides, insert a dummy fragment in the final to make sure that all
alignment is traversed. Finally, convert these fragments
in md_convert_frag with relax_table.
Tests that bfd_perform_reloc doesn't freak over a NONE reloc at end
of section.
gas/
* read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
* write.c (get_frag_for_reloc): Allow match just past end of frag.
gas/testsuite/
* gas/all/none.s,
* gas/all/none.d: New test.
* gas/all/gas.exp: Run it.
- 32 128 bit vector registers (overlapping with the existing 16 64 bit
floating point registers)
- vector double instructions
- vector integer instructions
- scalar vector instructions (allowing to have more floating point
registers for scalar operations)
- vector string instructions
gas/ChangeLog:
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
gas/testsuite/ChangeLog:
* gas/s390/esa-g5.d: Add a variant without the optional operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z10.d: For variants with a zero optional argument
it is not dumped by objdump anymore.
* gas/s390/zarch-zEC12.d: Likewise.
* gas/s390/zarch-z13.d: New file.
* gas/s390/zarch-z13.s: New file.
* gas/s390/s390.exp: Run the test for the z13 files.
include/opcode/ChangeLog:
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13.
ld/testsuite/ChangeLog:
* ld-s390/tlsbin.dd: The nopr register operand is optional and not
printed if 0 anymore.
opcodes/ChangeLog:
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
When runtime patching code (like e.g. done by the Linux kernel) there
may be cases where the set of stack frame alterations differs between
unpatched and patched code. Consequently the corresponding unwind data
needs patching too. Locating the right places within an FDE, however,
is rather cumbersome without a way to insert labels in the resulting
section. Hence this patch introduces a new directive, .cfi_label. Note
that with the way CFI data gets emitted currently (at the end of the
assembly process) this can't support local FB- and dollar-labels.
gas/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
(cfi_pseudo_table): Add "cfi_label".
(output_cfi_insn): Handle CFI_label.
(select_cie_for_fde): Als terminate CIE when encountering
CFI_label.
* dw2gencfi.h (cfi_add_label): Declare.
(struct cfi_insn_data): New member "sym_name".
(CFI_label): New.
* read.c (read_symbol_name): Drop "static".
* read.h (read_symbol_name): Declare.
gas/testsuite/
2015-01-12 Jan Beulich <jbeulich@suse.com>
gas/cfi/cfi-label.d, gas/cfi/cfi-label.s: New.
gas/cfi/cfi.exp: Run new tests.
These two, other than VQSHLU, didn't have their immediates properly range
checked so far.
(Re-sending unchanged from the original v2 due to never having got an
answer to https://sourceware.org/ml/binutils/2013-04/msg00121.html.)
gas/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_shl_imm): Check immediate range.
(do_neon_qshl_imm): Likewise.
gas/testsuite/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/arm/neon-addressing-bad.s: Add test for invalid VSHL,
VQSHL, and VQSHLU immediates.
* gas/arm/neon-addressing-bad.l: Update accordingly.
The C standard doesn't guarantee a function pointer can be cast to
void* and vice versa.
binutils/
* prdbg.c (print_debugging_info): Don't use void* for function
pointer param.
* budbg.h (print_debugging_info): Update prototype.
gas/
* read.c (s_altmacro, s_reloc): Make definition static.
When fixups are converted to a difference type within md_apply_fix, we
previously left the contents of VALP (the value that was initially
computed within write.c:fixup_segment) unchanged. This is harmless,
except that this value is used within write.c:fixup_segment once we
return from md_apply_fix to perform an overflow check.
In some cases, the value computed in write.c:fixup_segment is so wrong
that an overflow error can be triggered. These errors are incorrect.
This patch avoids the overflow errors by adjusting the value in
write.c:fixup_segment using the VALP pointer in md_apply_fix.
A test for this issue is included.
gas/ChangeLog:
* config/tc-avr.c (md_apply_fix): Update the contents of VALP for
diff fixups.
gas/testsuite/ChangeLog:
* gas/avr/large-debug-line-table.d: New file.
* gas/avr/large-debug-line-table.s: New file.
the X-Gene scheduling description up in the respective GCC backend.
* config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
X-Gene 2.
* doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
Using e.g.
.arch_extension simd
.arch_extension nocrypto
so far results in SIMD support getting disabled, which I can't see being
the purpose of the "no"-prefixed variants of architecture extension
specifications.
Of course it is questionable whether the current, counter intuitive
behavior needs to be retained, and the new behavior perhaps be made work
through e.g. a newly recognized "no-" prefix.
gas/
2015-01-07 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (struct arm_option_extension_value_table):
Split field "value" into fields "merge_value" and "clear_value".
(arm_extensions): Adjust initializer accordingly.
Adds documentation describing the -mlink-relax and -mno-link-relax
command line options.
gas/ChangeLog:
* doc/c-avr.texi: Document -mlink-relax and -mno-link-relax.
Have the assembler prepare for linker relaxation by default. This
means that users will be able to make use of linker relaxation without
having to adjust the assembler flags, this can make life easier when
compiling libraries.
Having this on by default in the assembler should make no difference to
the assembler code produced, however, some of the debug information will
be slightly less compressed.
A few tests needed to be updated as a result of this change as they
relied on linker relaxation support being off by default.
I've tightened up the definition of which sections can be relaxed on AVR
as part of this commit, the assembler used to think that all
non-debugging sections could be relaxed, when in reality only code
sections can be relaxed for AVR. The previous definition was not
dangerous, just over cautious. The new tighter definition allows an
extra test (gas/testsuite/gas/all/forward.d) to continue to pass.
gas/ChangeLog:
* config/tc-avr.c (struct avr_opt_s): Change link_relax to
no_link_relax, extend comment.
(enum options): Add new OPTION_NO_LINK_RELAX.
(md_longopts): Add entry for -mno-link-relax.
(md_parse_option): Handle OPTION_NO_LINK_RELAX, and update
OPTION_LINK_RELAX.
(md_begin): Initialise linkrelax from no_link_relax.
(md_show_usage): Include -mno-link-relax option.
(relaxable_section): Only allocatable code sections can be
relaxed.
* config/tc-avr.h (TC_LINKRELAX_FIXUP): Define.
gas/testsuite/ChangeLog:
* gas/all/gas.exp: Test will not pass on AVR due to linker
relaxation support.
* gas/avr/noreloc_withoutrelax.d: Add -mno-link-relax option.
* gas/avr/link-relax-elf-flag-clear.d: Likewise.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-avr/relax-elf-flags-02.d: Add -mno-link-relax
option.
* ld/testsuite/ld-avr/relax-elf-flags-03.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-04.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-05.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-06.d: Likewise.
The AVR target uses a bit in the elf header flags to indicate if the
object was assembled ready for linker relaxation. Previously this flag
was always set, even when the object was not assembled ready for linker
relaxation.
This patch moves setting of the flag into the assembler, and sets it
only when the assembler is preparing the file for linker relaxation.
bfd/ChangeLog:
* elf32-avr.c (bfd_elf_avr_final_write_processing): Don't set
EF_AVR_LINKRELAX_PREPARED unconditionally.
gas/ChangeLog:
* config/tc-avr.c: Add include for elf/avr.h.
(avr_elf_final_processing): New function.
* config/tc-avr.h (elf_tc_final_processing): Define.
(avr_elf_final_processing): Declare
gas/testsuite/ChangeLog:
* gas/avr/link-relax-elf-flag-clear.d: New file.
* gas/avr/link-relax-elf-flag-set.d: New file.
* gas/avr/link-relax-elf-flag.s: New file.
gas/
* config/tc-mips.c (md_apply_fix): Apply alignment check
to the symbol and offset rather than *valP for
BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message
for BFD_RELOC_MIPS_19_PCREL_S2.
gas/testsuite/
* gas/mips/r6-64.s: Remove .align directives from LDPC
instructions and add further tests for LDPC.
* gas/mips/r6-64-n32.d: remove the NOPs from LDPC expected
output and update for new tests.
* gas/mips/r6-64-n64.d: Likewise.
* gas/mips/ldpc-unalign.l: New file.
* gas/mips/ldpc-unalign.s: Likewise.
* gas/mips/mips.exp: Run ldpc-unalign test.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add JALRC alias for JIALC.
Remove the operand from NAL.
gas/testsuite/
* gas/mips/r6.s: Test JALRC and NAL
* gas/mips/r6-n32.d: Add expected output for JALRC and NAL.
* gas/mips/r6-n64.d: Likewise.
* gas/mips/r6.d: Likewise.
This makes gas .cfi output to .debug_frame match register numbering
emitted by gcc. md_reg_eh_frame_to_debug_frame follows the ABI,
targets not using it, notably Linux, don't.
* config/tc-ppc.h (md_reg_eh_frame_to_debug_frame): Match current
gcc behaviour.
* config/te-aix.h: New file.
* configure.tgt: Use em=aix for powerpc-aix.
On further reading of ISA manual it appears gas should have been
treating mftb and mftbu as extended mnemonics for mfspr, for ISA 2.03
and later.
opcodes/
* ppc-opc.c (powerpc_opcodes): Make mftb* generate mfspr for
power4 and later.
gas/testsuite/
* gas/ppc/a2.d: Update for mftb change.
* gas/ppc/476.d: Likewise.
For conditional branches that need more than one trampoline to reach its
target assembler couldn't always find suitable trampoline because
post-loop condition check was placed inside the loop, resulting in
premature loop termination. Move check outside the loop.
This fixes the following build errors seen when assembling huge files
produced by gcc:
Error: jump target out of range; no usable trampoline found
Error: operand 1 of 'j' has out of range value '307307'
2014-11-25 Max Filippov <jcmvbkbc@gmail.com>
gas/
* config/tc-xtensa.c (search_trampolines): Move post-loop
condition check outside the search loop.
gas/testsuite/
* gas/xtensa/trampoline.d: Add expected output for branches.
* gas/xtensa/trampoline.s: Add test case for branches.
gas/
2014-11-21 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (md_assemble): Do not consider relaxation.
(md_convert_frag): Test and set target arch attribute accordingly.
(aeabi_set_attribute_string): Turn it into a global function.
* config/tc-arm.h (md_post_relax_hook): Enable it for ARM target.
(aeabi_set_public_attributes): Declare it.
gas/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* gas/arm/attr-arch-assumption.d: New file.
* gas/arm/attr-arch-assumption.s: Likewise.
ld/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* ld-arm/tls-longplt-lib.s: Require ARMv6T2.
* ld-arm/tls-longplt.s: Likewise.
* ld-arm/tls-longplt-lib.d: Updated.
* ld-arm/tls-longplt.d: Likewise.
* config/tc-aarch64.c (warn_unpredictable_ldst): Check that transfer
registers are in the GP register set. Adjust warnings. Use correct
field member for address register.
* testsuite/gas/aarch64/diagnostic.l: Update.
Structions with R_X86_64_GOTTPOFF relocation must be encoded with REX
prefix even if it isn't required by destination register. Otherwise
linker can't safely perform IE -> LE optimization.
bfd/
PR ld/17482
* elf64-x86-64.c (elf_x86_64_relocate_section): Update comments
for IE->LE transition.
gas/
PR ld/17482
* config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix
for structions with R_X86_64_GOTTPOFF relocation for x32 if needed.
gas/testsuite/
PR ld/17482
* gas/i386/ilp32/x32-tls.d: New file.
* gas/i386/ilp32/x32-tls.s: Likewise.
ld/testsuite/
PR ld/17482
* ld-x86-64/tlsie4.dd: Updated.
bfd/
* elfxx-mips.c (update_mips_abiflags_isa): Add E_MIPS_ARCH_32R6
and E_MIPS_ARCH_64R6 support.
ld/testsuite/
* ld-mips-elf/abiflags-strip10-ph.d: New file.
* ld-mips-elf/mips-eld.exp: Run the new test.
gas/
* config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6
and INSN_ISA64R6 support.
gas/testsuite/
* gas/mips/elf_arch_mips32r6.d: New file.
* gas/mips/elf_arch_mips64r6.d: New file.
* gas/mips/mips.exp: Run the new tests.
obstack_next_free is supposed to return a void* rather than the char*
it does currently, so expressions involving pointer arithmetic need
a cast. Avoid the issue.
* config/tc-d10v.c (find_opcode): Call frag_now_fix_octets rather
than equivalent obstack_next_free expression.
* config/tc-d30v.c (find_format): Likewise.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
2014-10-21 Andrew Pinski <apinski@cavium.com>
* config/tc-aarch64.c (aarch64_cpus):
Add thunderx.
* doc/c-aarch64.texi: Document that thunderx
is a valid processor name.
fixed part of a fragment for output generation only, which required
MAX_MEM_FOR_RS_ALIGN_CODE to be large enough to hold the maximum pad.
* config/tc-aarch64.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define to 7.
* config/tc-aarch64.c (aarch64_handle_align): Rewrite to handle
large alignments with a constant fragment size of
MAX_MEM_FOR_RS_ALIGN_CODE.
This makes sure `HAVE_CODE_COMPRESSION' evaluates correctly when the
`.insn' directive is used at the beginning of a source file before any
instructions have been produced and that ELF file header's MIPS16 and
microMIPS ASE flags are set correctly in the case where no instructions
have been produced other than with the said directive.
gas/
* config/tc-mips.c (s_insn): Set file options.
gas/testsuite/
* gas/mips/insn-opts.d: New test.
* gas/mips/insn-opts.s: New test source.
* gas/mips/mips.exp: Run the new test.
This patch adds -mcpu=thunderx support to gas.
OK? Tested with no regressions.
ChangeLog:
* config/tc-aarch64.c (aarch64_cpus):
Add thunderx.
* doc/c-aarch64.texi: Document that thunderx
is a valid processor name.
The construct being added to the cond.s test case otherwise triggered
both the "missing closing ..." and the "stray ..." (twice) warnings in
_find_end_of_line(). As that code fragments suggests, this is needed to
support (include) files that can be used for both assembler .include
and compiler #include directives.
Asserting "idx" to be non-negative when subsequent code handles this
case is bogus. In fact the assertion triggers e.g. when mistakenly
using the arm32 comment character @ following an instruction.
While doing this I also noticed that despite there being local
variables "detail" and "idx", not all places where they could be used
did actually make use of them, so this is being adjusted at once.
Finally, for the code to be slightly more robust, also change
comparisons against -1 to such checking for a (non-)negative value.
The write.c change is to make gas report an error if reg_section
symbols should leak in future. The tc-i386.c change is the real fix.
Note that the error isn't the most helpful, "redefined symbol cannot
be used on reloc", but I'm not inclined to improve what is really an
internal gas error. reg_section symbols shouldn't leak..
gas/
PR 17493
* write.c (adjust_reloc_syms): Don't allow symbols in reg_section
to be reduced to reg_section section symbol.
* gas/config/tc-i386.c (i386_finalize_immediate): Reject all
reg_section immediates.
gas/testsuite/
* gas/i386/inval-equ-2.l: Adjust.
If src contains n or more bytes, strncat() writes n+1 bytes to dest
(n from src plus the terminating null byte). Therefore, the size of
dest must be at least strlen(dest)+n+1.
* config/tc-tic4x.c (md_assemble): Correct strncat size.
Hash lookup is silly when we can attach the line table info directly
to sections instead. Worse, hash lookup fails when we have multiple
sections with the same name.
gas/
* dwarf2dbg.c (all_segs_hash): Delete.
(get_line_subseg): Delete last_seg, last_subseg, last_line_subseg.
Retrieve line_seg for section via seg_info.
* subsegs.h (segment_info_typet): Add dwarf2_line_seg.
gas/testsuite/
* gas/elf/group2.d, * gas/elf/group2.s: New test.
* gas/elf/elf.exp: Run it.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
This patch fixes two related problems:
- By default gas is supposed to bump the current architecture
(starting with v6) as it finds "higher" instructions as the
assembling progresses. There are four possible cases depending on
the usage of the -A and -bump options:
(a) No -A and -bump are specified. In this case max_architecture
must be the highest architecture not conflicting with the
default architecture. The default opcode architecture is
indirectly set in configure.tgt and is "v9" in sparc64 systems
(from "v9-64"). Thus the maximum architecture in sparc64
systems must be "v9b". No warnings are echoed when the assembly
of an instruction bumps the current architecture.
(b) Only -bump is specified. This is like (a) but warnings are
always issued when the assembly of an instruction bumps the
current architecture.
(c) Only -A is specified. In this case bumping to a new
architecture is an error.
(d) Both -A and -bump are specified. In this case max_architecture
must be the highest architecture not conflicting with the
default architecture, but warnings are only to be issued when
bumping to an architecture higher than the architecture selected
in the -A option.
`max_architecture' is a global variable defined in tc-sparc.c which
is initialized to the opcode architecture corresponding to the
default architecture ("sparclite" for sparc-* targets and "v9" for
sparc64-* targets). Then in `md_begin' it is set to the highest
non-conflicting architecture, but only when both -A and -bump are
specified.
Thus (a) does not work:
$ echo "fzero %f0" | as
{standard input}: Assembler messages:
{standard input}:1: Error: Architecture mismatch on "fzero".
{standard input}:1: (Requires v9a|v9b; requested architecture is v9.)
Neither (b):
$ echo "fzero %f0" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Error: Architecture mismatch on "fzero".
{standard input}:1: (Requires v9a|v9b; requested architecture is v9.)
Only (d) does:
$ echo "fzero %f0" | as -Av9 -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9a" on "fzero"
This patch fixes that function to "upgrade" `max_architecture' also
in the (a) and (b) cases.
Note that this problem becomes apparent only in sparc64-* targets
because in sparc-* targets the default architecture is the "higher"
among the 32bit architectures ("sparclite").
- Gas maintains a set of hardware capabilities associated with each
gas architecture, in `sparc_arch_table'. On the other hand
libopcodes maintains a set of hardware capabilities needed by each
individual sparc instruction.
When an instruction is assembled in `sparc_ip' gas checks for the
presence of the hardware capabilities required by the instruction,
emitting an error if some capability is missing.
However, this mechanism does not work properly if the current
architecture is bumped due to an instruction requiring new hw
capabilities not present on either the default architecture or an
architecture specified with -A:
$ echo "fzero %f0" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9a" on "fzero"
{standard input}:1: Error: Hardware capability "vis" not enabled for "fzero".
This patch fixes this by adding the set of required hw caps of an
instruction if it triggers an architecture bump.
The patch has been tested in sparc64-unknown-linux-gnu.
gas/ChangeLog:
2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
when bumping the current architecture.
(md_begin): Adjust the highetst architecture level also when a
specific architecture is not requested.
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Update intended_arch based
on the info we got during parsing.
(arm_handle_align): Make sure the p2align expanding logic under thumb
unchanged.
gas/testsuite/
* gas/arm/blx-bl-convert.d: New testcase.
* gas/arm/blx-bl-convert.l: Warning expectation.
* gas/arm/blx-bl-convert.s: Source file.
This change removes code duplication for the SAA macro in line with other
such macros and also adds a !microMIPS internal consistency guard as
there's no microMIPS encoding of the underlying SAA/SAAD instructions.
* config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
jump to...
<M_SAAD_AB>: ... here. Assert that !microMIPS.
Only set the VLE flag if the instruction has been pulled via the VLE
instruction set. This way the flag is guaranteed to be set for VLE-only
instructions or for VLE-only processors, however it'll remain clear for
dual-mode instructions on dual-mode and, more importantly, standard-mode
processors.
gas/
* config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
flag if both the processor and opcode flags match.
ld/testsuite/
* ld-powerpc/apuinfo-vle.rd: New test.
* ld-powerpc/apuinfo-vle.s: New test source.
* ld-powerpc/apuinfo.rd: Adjust according to GAS PPC_APUINFO_VLE
handling change.
* ld-powerpc/powerpc.exp: Run the new test.
2014-08-21 Nathan Sidwell <nathan@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
opcodes/
* arm-dis.c (print_arm_address): Negate the GPR-relative offset
returned if the U bit is set.
2014-08-21 Paul Brook <paul@codesourcery.com>
gas/testsuite/
* gas/arm/arch7a-mp.d: Adjust according to `print_arm_address'
offset fix.
* gas/arm/arch7r-mp.d: Likewise.
cc1: warnings being treated as errors
.../gas/config/tc-arm.c: In function 'add_to_lit_pool':
.../gas/config/tc-arm.c:3193: error: 'imm1' may be used uninitialized in this function
* config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
Before FreeBSD-8 there was/is no arm support from the OS side.
FreeBSD-9.x added ARM support but only for the OABI.
From FreeBSD-10 upwards there is EABI support.
* Makefile.am: Add FreeBSD ARM support.
* Mafefile.in: Regenerate.
* configure.tgt: Add FreeBSD ARM support.
* config/te-armfbsdeabi.h: New file.
* config/te-armfbsdvfp.h: Likewise.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
than 4. This affects DWARF debug info generation in particular.
* config/tc-rl78.c (md_apply_fix): Correct handling of small sized
RELOC_RL78_DIFF fixups.
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
