opcodes/ChangeLog:
2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc_opcodes): Fix mnemonic of faligndatai.
gas/ChangeLog:
2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc5vis4.s: Fix mnemonic of faligndatai.
* testsuite/gas/sparc/sparc5vis4.d: Likewise.
This patch changes the location of several variants of the `wr'
instruction in sparc_opcodes. This is to get the assembler to emit the
right diagnostics when an invalid %asrN register is used in an
instruction.
This patch annotates the following SPARC instructions as VIS3B
instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8,
fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B
capability in several headers.
Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Annotate several instructions with
the HWCAP2_VIS3B hwcap.
include/opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (HWCAP2_VIS3B): Documentation improved.
include/elf/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
This patch fixes the hwcap entries in `sparc-opcodes' (which were
incorrectly located in the flags field) for the following
instructions:
wr r,r,%sys_tick
wr r,i,%sys_tick
wr r,r,%sys_tick_cmpr
wr r,i,%sys_tick_cmpr
edge8n edge8ln edge16n edge16ln edge32n edge32ln
bmask bshuffle siam
Tested in sparc-unknown-linux-gnu and sparc64-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap
entries.
Make current with UA2011 specification.
Add an F_PREFERRED opcode flag that indicates a preferred alias
when multiple aliases for the same opcode exists.
For 'lzd':
Add 'lzcnt' as primary instruction, and make 'lzd' an alias.
Add 'ldtw', 'ldtwa', 'sttw', 'sttwa':
The modern opcode for for 'ldd', 'ldda', 'std', and 'stda' on
integer registers. Mark the latter now as aliases.
For 'flush':
Support "[address]" syntax as well as plain "address".
Rework 'mov' aliases for 'wr':
Eliminate bogus three operand moves, and encode the
instructions properly for the "mov REG, %ASR" cases,
specifically we should encode the register in rs2 not rs1 as
per The SPARC V8 Architecture Manual.
Add missing cbcond aliases:
c{w,x}bz, c{w,x}blu, c{w,x}bnz, c{w,x}bgeu
Add 'd' suffix VIS logical ops:
The primary opcode for 'fzero' is now 'fzerod' (compare with
'fzeros'), for example. And thus 'fzero' is now an alias.
Add modern opcodes for condition code setting edge instructions:
They are now edgeN{,l}cc instead of plain edgeN{,l}.
Add modern opcodes for VIS comparisons:
All VIS comparisons now start with prefix "fp", retain the
older variants as aliases.
The signed variants for equal and not-equal have "u" aliases
to show that these comparisons are equally suited for unsigned
compares.
Update existing test cases as needed, and add several new ones.
include/opcode/
* sparc.h (F_PREFERRED): Define.
(F_PREF_ALIAS): Define.
opcodes/
* sparc-dis.c (compare_opcodes): When encountering multiple aliases
of an opcode, prefer the one with F_PREFERRED set.
* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
ops. Make 64-bit VIS logical ops have "d" suffix in their names,
mark existing mnenomics as aliases. Add "cc" suffix to edge
instructions generating condition codes, mark existing mnenomics
as aliases. Add "fp" prefix to VIS compare instructions, mark
existing mnenomics as aliases.
gas/testsuite/
* gas/sparc/cbcond.s: Add tests for new opcode aliases.
* gas/sparc/cbcond.d: Updated.
* gas/sparc/hpcvis3.s: Add tests for new opcode aliases.
* gas/sparc/hpcvis3.d: Updated.
* gas/sparc/v8-movwr-imm.d: Fix expected disassembly.
* gas/sparc/edge.s: New test.
* gas/sparc/edge.d: Expected disassembly.
* gas/sparc/flush.s: New test.
* gas/sparc/flush.d: Expected disassembly.
* gas/sparc/ldd_std.s: New test.
* gas/sparc/ldd_std.d: Expected disassembly.
* gas/sparc/ldtw_sttw.s: New test.
* gas/sparc/ldtw_sttw.d: Expected disassembly.
* gas/sparc/sparc.exp: Run new tests.
opcodes/
* sparc-opc.c (CBCOND): New define.
(CBCOND_XCC): Likewise.
(cbcond): New helper macro.
(sparc_opcodes): Add compare-and-branch instructions.
gas/
* config/tc-sparc.c (sparc_arch_table): Add HWCAP_CBCOND to
sparc4, v8pluse, v8plusv, v9e, and v9v.
(sparc_ip): Handle R_SPARC_5 of immediate constants inline in
order to accomodate cbcond which otherwise would require two
relocations to be handled in a single instruction..
gas/testsuite/
* gas/sparc/cbcond.s: New file.
* gas/sparc/cbcond.d: New file.
* gas/sparc/sparc.exp: Run cbcond test.
* sparc-opc.c (sparc_opcodes): Fix random instruction to write
to a float instead of an integer register.
gas/testsuite/
* gas/sparc/hpcvis3.s: Update to use float reg for random insn.
* gas/sparc/hpcvis3.d: Likewise.
opcodes/
* sparc-opc.c (sparc_opcodes): Add integer multiply-add
instructions.
gas/testsuite/
* gas/sparc/ima.d: New test.
* gas/sparc/ima.s: New test source.
* gas/sparc/sparc.exp: Run new test.
* sparc-opc.c (sparc_opcodes): Add entry for 'save simm13,regrs1,regrd'
This has been reported as being accepted by the Sun assmebler.
gas/testsuite/
* gas/sparc/save-args.[sd]: New test.
* gas/sparc/sparc.exp: Run new test.
The changes below bring 'mov' and 'ticc' instructions into line
with the V8 SPARC Architecture Manual.
* sparc-opc.c (sparc_opcodes): Add entry for 'ticc imm + regrs1'.
* sparc-opc.c (sparc_opcodes): Add alias entries for
'mov regrs2,%asrX'; 'mov regrs2,%y'; 'mov regrs2,%prs';
'mov regrs2,%wim' and 'mov regrs2,%tbr'.
* sparc-opc.c (sparc_opcodes): Move/Change entries for
'mov imm,%asrX'; 'mov imm,%y'; 'mov imm,%prs'; 'mov imm,%wim'
and 'mov imm,%tbr'.
* sparc-opc.c (sparc_opcodes): Add wr alias entries to match above
mov aliases.
gas/testsuite/
* gas/sparc/ticc-imm-reg.[sd]: New test.
* gas/sparc/v8-movwr-imm.[sd]: New test.
* gas/sparc/sparc.exp: Run new tests.
* sparc.h: Document new format codes '4', '5', and '('.
(OPF_LOW4, RS3): New macros.
opcodes/
* sparc-dis.c (v9a_ast_reg_names): Add "cps".
(X_RS3): New macro.
(print_insn_sparc): Handle '4', '5', and '(' format codes.
Accept %asr numbers below 28.
* sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3
instructions.
gas/
* config/tc-sparc.c (v9a_asr_table): Add "cps".
(sparc_ip): Handle '4', '5' and '(' format codes.
gas/testsuite
* gas/sparc/hpcvis3.d: New test.
* gas/sparc/hpcvis3.s: New test source.
* gas/sparc/sparc.exp: Run new test.
* sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
(v9_hpriv_reg_names): New table.
(print_insn_sparc): Allow values up to 16 for '?' and '!'.
New cases '$' and '%' for read/write hyperprivileged register.
* sparc-opc.c (sparc_opcodes): Add new entries for UA2005
window handling and rdhpr/wrhpr instructions.
(fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to
suffix. Use fmov*x macros, create all 3 fpsize variants in one
macro. Adjust all users.
