old-cross-binutils/gas/ChangeLog

1099 lines
35 KiB
Text
Raw Normal View History

2015-07-14 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
2015-07-09 Catherine Moore <clm@codesourcery.com>
* config/tc-mips.c (check_fpabi): Handle
VAL_GNU_MIPS_ABI_FP_NAN2008.
2015-07-08 Ciro Santilli <ciro.santilli@gmail.com>
* doc/as.texinfo: Clarify case requirements for pseudo ops.
2015-07-08 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
32 bit PC relative and update offset if the fixup is pc-relative.
* config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
relocs.
2015-07-03 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
Opcodes and assembler support for Nios II R2 2015-07-01 Sandra Loosemore <sandra@codesourcery.com> Cesar Philippidis <cesar@codesourcery.com> gas/ * config/tc-nios2.c (nios2_min_align): New. (nop): Replace with.... (nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New. (nios2_align): Handle alignment on 2-byte boundaries when CDX instructions may be present. (s_nios2_align): Adjust reference to nop. (CDXBRANCH, IS_CDXBRANCH): New. (CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New. (nios2_relax_subtype_size): Handle 2-byte CDX branches. (nios2_relax_frag): Likewise. (md_convert_frag): Handle R2 encodings. (nios2_check_overflow): Check that low-order bits are zero before applying rightshift from howto. (nios2_check_overflow): Correct negative overflow calculation. (nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue generic overflow messages for miscellaneous instruction formats. (md_apply_fix): Recognize new R2 relocations. For pc_relative relocations, store fixup in *valP. (nios2_reglist_mask, nios2_reglist_dir): New. (nios2_parse_reglist): New. (nios2_parse_base_register): New. (nios2_assemble_expression): Handle constant expressions designated by BFD_RELOC_NONE. (nios2_assemble_reg3): New. (nios2_assemble_arg_c): Handle R2 instruction formats. (nios2_assemble_arg_d): Likewise. (nios2_assemble_arg_s): Likewise. (nios2_assemble_arg_t): Likewise. (nios2_assemble_arg_D): New. (nios2_assemble_arg_S): New. (nios2_assemble_arg_T): New. (nios2_assemble_arg_i): Handle R2 instruction formats. (nios2_assemble_arg_I): New. (nios2_assemble_arg_u): Handle R2 instruction formats. (nios2_assemble_arg_U): New. (nios2_assemble_arg_V): New. (nios2_assemble_arg_W): New. (nios2_assemble_arg_X): New. (nios2_assemble_arg_Y): New. (nios2_assemble_arg_o): Handle R2 instruction formats. (nios2_assemble_arg_O): New. (nios2_assemble_arg_P): New. (nios2_assemble_arg_j): Handle R2 instruction formats. (nios2_assemble_arg_k): New. (nios2_assemble_arg_l): Handle R2 instruction formats. (nios2_assemble_arg_m): Likewise. (nios2_assemble_arg_M): New. (nios2_assemble_arg_N): New. (nios2_assemble_arg_e): New. (nios2_assemble_arg_f): New. (nios2_assemble_arg_g): New. (nios2_assemble_arg_h): New. (nios2_assemble_arg_R): New. (nios2_assemble_arg_B): New. (nios2_assemble_args): Handle new argument letters. (nios2_consume_arg): Likewise. (nios2_translate_pseudo_insn): Avoid dereferencing null pointer in error message. (nios2_ps_insn_info_structs): Add nop.n. (output_ubranch): Handle CDX branches. (output_cbranch): Likewise. (output_call): Handle R2 encodings. (output_movia): Likewise. (md_begin): Initialize nios2_min_align. (md_assemble): Align to nios2_min_align. Adjust nios2_min_align if a 16-bit instruction is seen. (nios2_cons_align): Use appropriate nop pattern. include/opcode/ * nios2.h (enum iw_format_type): Add R2 formats. (enum overflow_type): Add signed_immed12_overflow and enumeration_overflow for R2. (struct nios2_opcode): Document new argument letters for R2. (REG_3BIT, REG_LDWM, REG_POP): Define. (includes): Include nios2r2.h. (nios2_r2_opcodes, nios2_num_r2_opcodes): Declare. (nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): Declare. (nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): Declare. (nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): Declare. (nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): Declare. (nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): Declare. * nios2r2.h: New file. opcodes/ * nios2-dis.c (nios2_extract_opcode): New. (nios2_disassembler_state): New. (nios2_find_opcode_hash): Use mach parameter to select correct disassembler state. (nios2_print_insn_arg): Extend to support new R2 argument letters and formats. (print_insn_nios2): Check for 16-bit instruction at end of memory. * nios2-opc.c (nios2_builtin_regs): Add R2 register attributes. (NIOS2_NUM_OPCODES): Rename to... (NIOS2_NUM_R1_OPCODES): This. (nios2_r2_opcodes): New. (NIOS2_NUM_R2_OPCODES): New. (nios2_num_r2_opcodes): New. (nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): New. (nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): New. (nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): New. (nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): New. (nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): New.
2015-07-01 23:08:03 +00:00
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
* config/tc-nios2.c (nios2_min_align): New.
(nop): Replace with....
(nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New.
(nios2_align): Handle alignment on 2-byte boundaries when CDX
instructions may be present.
(s_nios2_align): Adjust reference to nop.
(CDXBRANCH, IS_CDXBRANCH): New.
(CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New.
(nios2_relax_subtype_size): Handle 2-byte CDX branches.
(nios2_relax_frag): Likewise.
(md_convert_frag): Handle R2 encodings.
(nios2_check_overflow): Check that low-order bits are zero
before applying rightshift from howto.
(nios2_check_overflow): Correct negative overflow calculation.
(nios2_diagnose_overflow): Handle signed_immed12_overflow. Issue
generic overflow messages for miscellaneous instruction formats.
(md_apply_fix): Recognize new R2 relocations. For pc_relative
relocations, store fixup in *valP.
(nios2_reglist_mask, nios2_reglist_dir): New.
(nios2_parse_reglist): New.
(nios2_parse_base_register): New.
(nios2_assemble_expression): Handle constant expressions designated
by BFD_RELOC_NONE.
(nios2_assemble_reg3): New.
(nios2_assemble_arg_c): Handle R2 instruction formats.
(nios2_assemble_arg_d): Likewise.
(nios2_assemble_arg_s): Likewise.
(nios2_assemble_arg_t): Likewise.
(nios2_assemble_arg_D): New.
(nios2_assemble_arg_S): New.
(nios2_assemble_arg_T): New.
(nios2_assemble_arg_i): Handle R2 instruction formats.
(nios2_assemble_arg_I): New.
(nios2_assemble_arg_u): Handle R2 instruction formats.
(nios2_assemble_arg_U): New.
(nios2_assemble_arg_V): New.
(nios2_assemble_arg_W): New.
(nios2_assemble_arg_X): New.
(nios2_assemble_arg_Y): New.
(nios2_assemble_arg_o): Handle R2 instruction formats.
(nios2_assemble_arg_O): New.
(nios2_assemble_arg_P): New.
(nios2_assemble_arg_j): Handle R2 instruction formats.
(nios2_assemble_arg_k): New.
(nios2_assemble_arg_l): Handle R2 instruction formats.
(nios2_assemble_arg_m): Likewise.
(nios2_assemble_arg_M): New.
(nios2_assemble_arg_N): New.
(nios2_assemble_arg_e): New.
(nios2_assemble_arg_f): New.
(nios2_assemble_arg_g): New.
(nios2_assemble_arg_h): New.
(nios2_assemble_arg_R): New.
(nios2_assemble_arg_B): New.
(nios2_assemble_args): Handle new argument letters.
(nios2_consume_arg): Likewise.
(nios2_translate_pseudo_insn): Avoid dereferencing null pointer
in error message.
(nios2_ps_insn_info_structs): Add nop.n.
(output_ubranch): Handle CDX branches.
(output_cbranch): Likewise.
(output_call): Handle R2 encodings.
(output_movia): Likewise.
(md_begin): Initialize nios2_min_align.
(md_assemble): Align to nios2_min_align. Adjust nios2_min_align
if a 16-bit instruction is seen.
(nios2_cons_align): Use appropriate nop pattern.
2015-07-01 Sandra Loosemore <sandra@codesourcery.com>
Cesar Philippidis <cesar@codesourcery.com>
* config/tc-nios2.c: Adjust includes.
(OPTION_MARCH): Define.
(md_longopts): Add -march option.
(nios2_architecture): New.
(nios2_use_arch): New.
(md_parse_option): Handle OPTION_MARCH.
(md_show_usage): Document -march.
(md_begin): Set arch in BFD.
(nios2_elf_final_processing): New.
* config/tc-nios2.h (elf_tc_final_processing): Define.
(nios2_elf_final_processing): New.
* doc/c-nios2.texi (-march): Add documentation.
2015-06-30 Amit Pawar <Amit.Pawar@amd.com>
* config/tc-i386.c (cpu_arch): Add .mwaitx.
(process_immext): Check operands for monitorx/mwaitx instructions.
* doc/c-i386.texi: Document mwaitx.
2015-06-28 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with
COMPRESS_DEBUG_GNU_ZLIB.
* config/tc-i386.c (flag_compress_debug): Likewise.
2015-06-24 H.J. Lu <hongjiu.lu@intel.com>
* doc/as.texinfo (.cfi_lsda): Remove the extra @section.
Allow for optional operands with non-zero default values. ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand with the value of either a 0 or 1. It also defines an extended mnemonic with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1". I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the problem is, optional operands that are ommitted always default to the value 0, which is wrong in this case. I have added support for allowing non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE that specifies that the default operand value to be used is stored in the SHIFT field of the operand field immediately following this one. This fixes the rfebb issue. I also fixed the mftb and mfcr instructions so they use the same mechanism. This allows us to flag invalid uses of mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd]. include/opcode/ * ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New. (ppc_optional_operand_value): New inline function. opcodes/ * ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value. * ppc-opc.c (FXM4): Add non-zero optional value. (TBR): Likewise. (SXL): Likewise. (insert_fxm): Handle new default operand value. (extract_fxm): Likewise. (insert_tbr): Likewise. (extract_tbr): Likewise. gas/ * config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value. Allow for optional operands without insert functions. gas/testsuite/ * gas/ppc/power8.d: Fixup rfebb test results. * gas/ppc/a2.s: Fix invalid mfcr test. * gas/ppc/a2.d: Likewise.
2015-06-19 22:17:07 +00:00
2015-06-19 Peter Bergner <bergner@vnet.ibm.com>
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
2015-06-18 Nick Clifton <nickc@redhat.com>
PR gas/18541
* config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
mode against a nearby symbol.
2015-06-18 Nick Clifton <nickc@redhat.com>
PR gas/18481
* config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
in the same case as BFD_RELOC_ARM_TLS_IS32.
2015-06-17 Nick Clifton <nickc@redhat.com>
* config/tc-arm.c (is_double_a_single): Make conditional upon the
availablity of a 64-bit type. Use this type for the argument and
mantissa.
(double_to_single): Likewise.
* config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
the constant value, if available. Generate a 64-bit value from a
bignum if supported. Only perform the second optimization for
PR 18500 if the 64-bit type is available.
2015-06-17 Alessandro Marzocchi <alessandro.marzocchi@gmail.com>
PR gas/18500
* config/tc-arm.c (is_double_a_single): New function.
(double_to_single): New function.
(move_or_literal_pool): Add support for converting VLDR to VMOV.
PR gas/18499
* config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
to MOV.w or MVN.w for Thumb2.
2015-06-17 Nicolas Pitre <nico@linaro.org>
* as.c (show_usage): Document --sectname-subst.
(parse_args): Add --sectname-subst.
* as.h (flag_sectname_subst): New.
* config/obj-elf.c (obj_elf_section_name): Add %S substitution.
* doc/as.texinfo: Document it.
2015-06-15 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifier.
(md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTOFF_LO15.
(aarch64_force_relocation): Ditto
2015-06-13 Mark Wielaard <mjw@redhat.com>
* dwarf2dbg.c (out_header): Document EXPR->X_add_number value,
out_debug_aranges depends on it.
(out_debug_aranges): Track size of header to properly pad header
for address alignment.
2015-06-11 John David Anglin <danglin@gcc.gnu.org>
PR gas/18427
* gas/config/tc-hppa.c (last_label_symbol): Declare.
(pa_get_label): Return last label in current space/segment or NULL.
(pa_define_label): Record last label and add to root.
(pa_undefine_label): Remove last label from root.
2015-06-08 Nick Clifton <nickc@redhat.com>
* config/tc-rx.c (rx_op): Correct handling of integer bignums.
2015-06-04 Matthew Wahab <matthew.wahab@arm.com>
* NEWS: Mention ARMv8.1 support in the Aarch64 port.
* config/tc-aarch64.c (aarch64_arch_option_table): Add "armv8.1-a".
* doc/c-aarch64.texi (-march): Add "armv8.1-a".
2015-06-04 Renlin Li <renlin.li@arm.com>
* config/tc-arm.c (arm_init_frag): Use frag's thumb_mode information
when available.
2015-06-04 Nick Clifton <nickc@redhat.com>
* config/tc-h8300.c (md_section_align): Fix compile time warning
about left shifting a negative value.
2015-06-03 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_archs): Add "armv8.1-a".
* doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a".
* NEWS: Mention ARMv8.1 support.
2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_pan): New.
(do_setpan): New, encode an ARM SETPAN instruction.
(do_t_setpan): New, encode a Thumb SETPAN instruction.
(insns): Add "setpan".
(arm_extensions): Add "pan".
* doc/c-arm.texi (ARM Options): Add "pan" to list of -mcpu processor
extensions.
2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "rdma".
* doc/c-aarch64.texi (AArch64 Extensions): Add "rdma".
2015-06-02 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "lor".
* doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of
architecture extensions.
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_sys_reg): New parameter. Check target
support. Fix whitespace.
(parse_operands): Update for parse_sys_reg changes.
(aarch64_features): Add "pan".
* doc/c-aarch64.texi (Aarch64 Extensions): Add "pan".
2015-06-01 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14.
(aarch64_force_relocation): Ditto.
2015-06-01 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15.
(aarch64_force_relocation): Ditto.
Compact EH Support The specification for the Compact EH format is available at: https://github.com/MentorEmbedded/cxx-abi/blob/master/MIPSCompactEH.pdf 2015-05-28 Catherine Moore <clm@codesourcery.com> Bernd Schmidt <bernds@codesourcery.com> Paul Brook <paul@codesourcery.com> bfd/ * bfd-in2.h: Regenerated. * elf-bfd.h (DWARF2_EH_HDR, COMPACT_EH_HDR): Define. (COMPACT_EH_CANT_UNWIND_OPCODE): Define. (dwarf_eh_frame_hdr_info): Move dwarf-specific fields from eh_frame_hdr_info. (compact_eh_frame_hdr_info): Declare. (eh_frame_hdr_info): Redeclare with union for dwarf-specific fields and compact-eh fields. (elf_backend_data): Add cant_unwind_opcode and compact_eh_encoding. (bfd_elf_section_data): Add eh_frame_entry_field. (elf_section_eh_frame_entry): Define. (bfd_elf_parse_eh_frame_entries): Declare. (_bfd_elf_parse_eh_frame_entry): Declare. (_bfd_elf_end_eh_frame_parsing): Declare. (_bfd_elf_write_section_eh_frame_entry): Declare. (_bfd_elf_eh_frame_entry_present): Declare. (_bfd_elf_section_for_symbol): Declare. * elf-eh-frame.c (bfd_elf_discard_eh_frame_entry): New function. (bfd_elf_record_eh_frame_entry): New function. (_bfd_elf_parse_eh_frame_entry): New function. (_bfd_elf_parse_eh_frame): Update hdr_info field references. (cmp_eh_frame_hdr): New function. (add_eh_frame_hdr_terminator): New function. (_bfd_elf_end_eh_frame_parsing): New function. (find_merged_cie): Update hdr_info field references. (_bfd_elf_discard_section_eh_frame): Likewise. (_bfd_elf_discard_section_eh_frame_hdr): Add Compact EH support. (_bfd_elf_eh_frame_entry_present): New function. (_bfd_elf_maybe_strip_eh_frame_hdr): Add Compact EH support. (_bfd_elf_write_section_eh_frame_entry): New function. (_bfd_elf_write_section_eh_frame): Update hdr_info field references. (_bfd_elf_fixup_eh_frame_hdr): New function. (write_compact_eh_frame_hdr): New function. (write_dwarf_eh_frame_hdr): New function. (_bfd_elf_write_section_eh_frame_hdr): Add Compact EH support. * elflink.c (_bfd_elf_section_for_symbol): New function. (elf_section_ignore_discarded_relocs): Add Compact EH support. (elf_link_input_bfd): Likewise. (bfd_elf_final_link): Likewise. (_bfd_elf_gc_mark): Likewise. (bfd_elf_parse_eh_frame_entries): New function. (bfd_elf_gc_sections): Add Compact EH support. (bfd_elf_discard_info): Likewise. * elfxx-mips.c: Include dwarf2.h. (_bfd_mips_elf_compact_eh_encoding): New function. (_bfd_mips_elf_cant_unwind_opcode): New function. * elfxx-mips.h (_bfd_mips_elf_compact_eh_encoding): Declare. (_bfd_mips_elf_cant_unwind_opcode): Declare. (elf_backend_compact_eh_encoding): Define. (elf_backend_cant_unwind_opcode): Define. * elfxx-target.h (elf_backend_compact_eh_encoding): Provide default. (elf_backend_cant_unwind_opcode): Provide default. (elf_backend_data elfNN_bed): Add elf_backend_compact_eh_encoding and elf_backend_cant_unwind_opcode. * section.c (SEC_INFO_TYPE_EH_FRAME_ENTRY): Add definition. gas/ * config/tc-alpha.c (all_cfi_sections): Declare. (s_alpha_ent): Initialize all_cfi_sections. (alpha_elf_md_end): Invoke cfi_set_sections. * config/tc-mips.c (md_apply_fix): Handle BFD_RELOC_NONE. (s_ehword): Use BFD_RELOC_32_PCREL. (mips_fix_adjustable): Handle BFD_RELOC_32_PCREL. (mips_cfi_reloc_for_encoding): New function. * tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine. (DWARF2_FDE_RELOC_ENCODING): Define. (tc_cfi_reloc_for_encoding): Define. (mips_cfi_reloc_for_encoding): Define. (tc_compact_eh_opcode_stop): Define. (tc_compact_eh_opcode_pad): Define. * doc/as.texinfo: Document Compact EH extensions. * doc/internals.texi: Likewise. * dw2gencfi.c (EH_FRAME_LINKONCE): Redefine. (tc_cfi_reloc_for_encoding): Provide default. (compact_eh): Declare. (emit_expr_encoded): New function. (get_debugseg_name): Add Compact EH support. (alloc_debugseg_item): Likewise. (cfi_set_sections): New function. (dot_cfi_fde_data): New function. (dot_cfi_personality_id): New function. (dot_cfi_inline_lsda): New function. (cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id, and cfi_inline_lsda. (dot_cfi_personality): Add Compact EH support. (dot_cfi_lsda): Likewise. (dot_cfi_sections): Likewise. (dot_cfi_startproc): Likewise. (get_cfi_seg): Likewise. (output_compact_unwind_data): New function. (output_cfi_insn): Add Compact EH support. (output_cie): Likewise. (output_fde): Likewise. (cfi_finish): Likewise. (cfi_emit_eh_header): New function. (output_eh_header): New function. * dw2gencfi.h (cfi_set_sections): Declare. (SUPPORT_COMPACT_EH): Define. (MULTIPLE_FRAME_SECTIONS): Define. New enumeration to describe the Compact EH header format. (fde_entry): Add new fields personality_id, eh_header_type, eh_data_size, eh_data, eh_loc and sections. (CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target, CFI_EMIT_eh_frame_compact): Define. 2015-05-22 Catherine Moore <clm@codesourcery.com> Bernd Schmidt <bernds@codesourcery.com> gas/testsuite/ * gas/mips/mips.exp: Run new tests. * gas/mips/compact-eh-1.s: New file. * gas/mips/compact-eh-2.s: New file. * gas/mips/compact-eh-3.s: New file. * gas/mips/compact-eh-4.s: New file. * gas/mips/compact-eh-5.s: New file. * gas/mips/compact-eh-6.s: New file. * gas/mips/compact-eh-7.s: New file. * gas/mips/compact-eh-eb-1.d: New file. * gas/mips/compact-eh-eb-2.d: New file. * gas/mips/compact-eh-eb-3.d: New file. * gas/mips/compact-eh-eb-4.d: New file. * gas/mips/compact-eh-eb-5.d: New file. * gas/mips/compact-eh-eb-6.d: New file. * gas/mips/compact-eh-eb-7.d: New file. * gas/mips/compact-eh-el-1.d: New file. * gas/mips/compact-eh-el-2.d: New file. * gas/mips/compact-eh-el-3.d: New file. * gas/mips/compact-eh-el-4.d: New file. * gas/mips/compact-eh-el-5.d: New file. * gas/mips/compact-eh-el-6.d: New file. * gas/mips/compact-eh-el-7.d: New file. * gas/mips/compact-eh-err1.l: New file. * gas/mips/compact-eh-err1.s: New file. * gas/mips/compact-eh-err2.l: New file. * gas/mips/compact-eh-err2.s: New file. 2015-05-22 Catherine Moore <clm@codesourcery.com> include/ * bfdlink.h: Rename eh_frame_hdr to eh_frame_hdr_type. 2015-05-22 Catherine Moore <clm@codesourcery.com> Paul Brook <paul@codesourcery.com> ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Add Compact EH support. * scripttempl/elf.sc: Handle .eh_frame_entry and .gnu_extab sections. 2015-05-22 Catherine Moore <clm@codesourcery.com> ld/testsuite/ * ld-mips-elf/compact-eh.ld: New linker script. * ld-mips-elf/compact-eh1.d: New. * ld-mips-elf/compact-eh1.s: New. * ld-mips-elf/compact-eh1a.s: New. * ld-mips-elf/compact-eh1b.s: New. * ld-mips-elf/compact-eh2.d: New. * ld-mips-elf/compact-eh2.s: New. * ld-mips-elf/compact-eh3.d: New. * ld-mips-elf/compact-eh3.s: New. * ld-mips-elf/compact-eh3a.s: New. * ld-mips-elf/compact-eh4.d: New. * ld-mips-elf/compact-eh5.d: New. * ld-mips-elf/compact-eh6.d: New. * ld-mips-elf/mips-elf.exp: Run new tests.
2015-05-28 21:50:36 +00:00
2015-05-28 Catherine Moore <clm@codesourcery.com>
Bernd Schmidt <bernds@codesourcery.com>
Paul Brook <paul@codesourcery.com>
gas/
* config/tc-alpha.c (all_cfi_sections): Declare.
(s_alpha_ent): Initialize all_cfi_sections.
(alpha_elf_md_end): Invoke cfi_set_sections.
* config/tc-mips.c (md_apply_fix): Handle BFD_RELOC_NONE.
(s_ehword): Use BFD_RELOC_32_PCREL.
(mips_fix_adjustable): Handle BFD_RELOC_32_PCREL.
(mips_cfi_reloc_for_encoding): New function.
* tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine.
(DWARF2_FDE_RELOC_ENCODING): Define.
(tc_cfi_reloc_for_encoding): Define.
(mips_cfi_reloc_for_encoding): Define.
(tc_compact_eh_opcode_stop): Define.
(tc_compact_eh_opcode_pad): Define.
* doc/as.texinfo: Document Compact EH extensions.
* doc/internals.texi: Likewise.
* dw2gencfi.c (EH_FRAME_LINKONCE): Redefine.
(tc_cfi_reloc_for_encoding): Provide default.
(compact_eh): Declare.
(emit_expr_encoded): New function.
(get_debugseg_name): Add Compact EH support.
(alloc_debugseg_item): Likewise.
(cfi_set_sections): New function.
(dot_cfi_fde_data): New function.
(dot_cfi_personality_id): New function.
(dot_cfi_inline_lsda): New function.
(cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id,
and cfi_inline_lsda.
(dot_cfi_personality): Add Compact EH support.
(dot_cfi_lsda): Likewise.
(dot_cfi_sections): Likewise.
(dot_cfi_startproc): Likewise.
(get_cfi_seg): Likewise.
(output_compact_unwind_data): New function.
(output_cfi_insn): Add Compact EH support.
(output_cie): Likewise.
(output_fde): Likewise.
(cfi_finish): Likewise.
(cfi_emit_eh_header): New function.
(output_eh_header): New function.
* dw2gencfi.h (cfi_set_sections): Declare.
(SUPPORT_COMPACT_EH): Define.
(MULTIPLE_FRAME_SECTIONS): Define.
New enumeration to describe the Compact EH header format.
(fde_entry): Add new fields personality_id, eh_header_type, eh_data_size,
eh_data, eh_loc and sections.
(CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target,
CFI_EMIT_eh_frame_compact): Define.
2015-05-26 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_move_literals): Check that
search_frag is non-NULL. Report error if literal frag is not
found.
2015-05-22 Nick Clifton <nickc@redhat.com>
PR gas/18446
* read.c (output_big_sleb128): Use U suffix to prevent compile
time warning.
2015-05-19 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (process_movw_reloc_info): Sort relocation case
labels alphabetically.
(md_apply_fix): Ditto.
(aarch64_force_relocation): Ditto.
Support AMD64/Intel ISAs in assembler/disassembler AMD64 spec and Intel64 spec differ in direct unconditional branches in 64-bit mode. AMD64 supports direct unconditional branches with 16-bit offset via the data size prefix, which truncates RIP to 16 bits, while the data size prefix is ignored by Intel64. This patch adds -mamd64/-mintel64 option to x86-64 assembler and -Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive ISA, which is AMD64, is the default. GDB can add an option, similar to (gdb) help set disassembly-flavor Set the disassembly flavor. The valid values are "att" and "intel", and the default value is "att". to select which ISA to disassemble. binutils/ PR binutis/18386 * doc/binutils.texi: Document -Mamd64 and -Mintel64. gas/ PR binutis/18386 * config/tc-i386.c (OPTION_MAMD64): New. (OPTION_MINTEL64): Likewise. (md_longopts): Add -mamd64 and -mintel64. (md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64. (md_show_usage): Add -mamd64 and -mintel64. * doc/c-i386.texi: Document -mamd64 and -mintel64. gas/testsuite/ PR binutis/18386 * gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3. * gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump. * gas/i386/ilp32/x86-64-branch.d: Likewise. * gas/i386/x86-64-branch-2.d: New file. * gas/i386/x86-64-branch-2.s: Likewise. * gas/i386/x86-64-branch-3.l: Likewise. * gas/i386/x86-64-branch-3.s: Likewise. ld/testsuite/ PR binutis/18386 * ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump. * ld-x86-64/tlspic.dd: Likewise. * ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to objdump for tlspic.dd and tlsgdesc.dd. opcodes/ PR binutis/18386 * i386-dis.c: Add comments for '@'. (x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9. (enum x86_64_isa): New. (isa64): Likewise. (print_i386_disassembler_options): Add amd64 and intel64. (print_insn): Handle amd64 and intel64. (putop): Handle '@'. (OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit. * i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64. * i386-opc.h (AMD64): New. (CpuIntel64): Likewise. (i386_cpu_flags): Add cpuamd64 and cpuintel64. * i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64. Mark direct call/jmp without Disp16|Disp32 as Intel64. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2015-05-15 16:47:39 +00:00
2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
Add -mshared option to x86 ELF assembler This patch adds -mshared option to x86 ELF assembler. By default, assembler will optimize out non-PLT relocations against defined non-weak global branch targets with default visibility. The -mshared option tells the assembler to generate code which may go into a shared library where all non-weak global branch targets with default visibility can be preempted. The resulting code is slightly bigger. This option only affects the handling of branch instructions. This Linux kernel patch is needed to create a working x86 Linux kernel if it hasn't been applied: diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index ae6588b..b91a00c 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -339,8 +339,8 @@ early_idt_handlers: i = i + 1 .endr -/* This is global to keep gas from relaxing the jumps */ -ENTRY(early_idt_handler) +/* This is weak to keep gas from relaxing the jumps */ +WEAK(early_idt_handler) cld cmpl $2,(%rsp) # X86_TRAP_NMI -- gas/ * config/tc-i386.c (shared): New. (OPTION_MSHARED): Likewise. (elf_symbol_resolved_in_segment_p): Add relocation argument. Check PLT relocations and shared. (md_estimate_size_before_relax): Pass fragP->fr_var to elf_symbol_resolved_in_segment_p. (md_longopts): Add -mshared. (md_show_usage): Likewise. (md_parse_option): Handle OPTION_MSHARED. * doc/c-i386.texi: Document -mshared. gas/testsuite/ * gas/i386/i386.exp: Don't run pcrel for ELF targets. Run pcrel-elf, relax-4 and x86-64-relax-3 for ELF targets. * gas/i386/pcrel-elf.d: New file. * gas/i386/relax-4.d: Likewise. * gas/i386/x86-64-relax-3.d: Likewise. * gas/i386/relax-3.d: Pass -mshared to assembler. Updated. * gas/i386/x86-64-relax-2.d: Likewise. * gas/i386/relax-3.s: Add test for PLT relocation.
2015-05-15 10:17:31 +00:00
2015-05-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (shared): New.
(OPTION_MSHARED): Likewise.
(elf_symbol_resolved_in_segment_p): Add relocation argument.
Check PLT relocations and shared.
(md_estimate_size_before_relax): Pass fragP->fr_var to
elf_symbol_resolved_in_segment_p.
(md_longopts): Add -mshared.
(md_show_usage): Likewise.
(md_parse_option): Handle OPTION_MSHARED.
* doc/c-i386.texi: Document -mshared.
2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header, which
is handled by bfd_update_compression_header.
2015-05-13 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_relax_frag): Allow trampoline to be
closer than J_RANGE / 2 to jump frag.
2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
* config/tc-i386.c (i386_mach): Support iamcu.
(i386_target_format): Likewise.
2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch): Add iamcu.
(i386_align_code): Handle PROCESSOR_IAMCU.
(i386_arch): Likewise.
(i386_mach): Likewise.
(i386_target_format): Likewise.
(valid_iamcu_cpu_flags): New function.
(check_cpu_arch_compatible): Only allow Intel MCU instructions
when targeting Intel MCU.
(set_cpu_arch): Call valid_iamcu_cpu_flags to check if CPU flags
are valid for Intel MCU.
(md_parse_option): Likewise.
* tc-i386.h (ELF_TARGET_IAMCU_FORMAT): New.
(processor_type): Add PROCESSOR_IAMCU.
* doc/c-i386.texi: Document iamcu.
2015-05-08 Nick Clifton <nickc@redhat.com>
PR gas/18347
* config/tc-arm.h (TC_EQUAL_IN_INSN): Define.
* config/tc-arm.c (arm_tc_equal_in_insn): New function. Move
the symbol name checking code to here from...
(md_undefined_symbo): ... here.
2015-05-07 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (elf_symbol_resolved_in_segment_p): New.
(md_estimate_size_before_relax): Use it.
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Typo in comment fixed.
2015-05-06 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
condition codes
* doc/c-sparc.texi (Sparc-Regs): Document %ncc.
2015-05-06 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo (Dollar Local Labels): Note that these are only
supported on some targets.
2015-05-06 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Recording alignment before exit.
2015-05-05 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (aarch64_init_frag): Always generate mapping
symbols.
2015-05-05 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
(msp430_make_init_symbols): New function.
(msp430_section): Call it.
(msp430_frob_section): Likewise.
xtensa: optimize trampolines relaxation Currently every fixup in the current segment is checked when relaxing trampoline frag. This is very expensive. Make a searchable array of fixups pointing at potentially oversized jumps at the beginning of every relaxation pass and only check subset of this cache in the reach of single jump from the trampoline frag currently being relaxed. Original profile: % time self children called name ----------------------------------------- 370.16 593.38 12283048/12283048 relax_segment 98.4 370.16 593.38 12283048 xtensa_relax_frag 58.91 269.26 2691463834/2699602236 xtensa_insnbuf_from_chars 68.35 68.17 811266668/813338977 S_GET_VALUE 36.85 29.51 2684369246/2685538060 xtensa_opcode_decode 28.34 8.84 2684369246/2685538060 xtensa_format_get_slot 12.39 5.94 2691463834/2699775044 xtensa_format_decode 0.03 4.60 4101109/4101109 relax_frag_for_align 0.18 1.76 994617/994617 relax_frag_immed 0.07 0.09 24556277/24851220 new_logical_line 0.06 0.00 12283048/14067410 as_where 0.04 0.00 7094588/15460506 xtensa_format_num_slots 0.00 0.00 1/712477 xtensa_insnbuf_alloc ----------------------------------------- Same data, after optimization: % time self children called name ----------------------------------------- 0.51 7.47 12283048/12283048 relax_segment 58.0 0.51 7.47 12283048 xtensa_relax_frag 0.02 4.08 4101109/4101109 relax_frag_for_align 0.18 1.39 994617/994617 relax_frag_immed 0.01 0.98 555/555 xtensa_cache_relaxable_fixups 0.21 0.25 7094588/16693271 xtensa_insnbuf_from_chars 0.06 0.12 24556277/24851220 new_logical_line 0.06 0.00 7094588/15460506 xtensa_format_num_slots 0.02 0.04 7094588/16866079 xtensa_format_decode 0.05 0.00 12283048/14067410 as_where 0.00 0.00 1/712477 xtensa_insnbuf_alloc 0.00 0.00 93808/93808 xtensa_find_first_cached_fixup ----------------------------------------- 2015-05-02 Max Filippov <jcmvbkbc@gmail.com> gas/ * config/tc-xtensa.c (cached_fixupS, fixup_cacheS): New typedefs. (struct cached_fixup, struct fixup_cache): New structures. (fixup_order, xtensa_make_cached_fixup), (xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups), (xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup), (xtensa_add_cached_fixup): New functions. (xtensa_relax_frag): Cache fixups pointing at potentially oversized jumps at the beginning of every relaxation pass. Only check subset of this cache in the reach of single jump from the trampoline frag currently being relaxed.
2015-05-01 08:39:12 +00:00
2015-05-02 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (cached_fixupS, fixup_cacheS): New typedefs.
(struct cached_fixup, struct fixup_cache): New structures.
(fixup_order, xtensa_make_cached_fixup),
(xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups),
(xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup),
(xtensa_add_cached_fixup): New functions.
(xtensa_relax_frag): Cache fixups pointing at potentially
oversized jumps at the beginning of every relaxation pass. Only
check subset of this cache in the reach of single jump from the
trampoline frag currently being relaxed.
2015-05-01 Nick Clifton <nickc@redhat.com>
* config/rl78-parse.y (MULU): Remove ISA_G14.
(MULH, DIVHU, DIVWU, MACHI, MACH): Update error strings.
2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (i386_elf_emit_arch_note): Removed.
* config/tc-i386.h (md_end): Likewise.
(i386_elf_emit_arch_note): Likewise.
2015-05-01 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt: Support i386-*-elf*.
2015-04-30 DJ Delorie <dj@redhat.com>
* config/rl78-defs.h (rl78_isa_g10): New.
(rl78_isa_g13): New.
(rl78_isa_g14): New.
* config/rl78-parse.y (ISA_G10): New.
(ISA_G13): New.
(ISA_G14): New.
(MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them.
* config/tc-rl78.c (rl78_isa_g10): New.
(rl78_isa_g13): New.
(rl78_isa_g14): New.
2015-04-30 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (i386_target_format): Use "else if" on
cpu_arch_isa.
2015-04-30 Nick Clifton <nickc@redhat.com>
PR gas/18347
* config/tc-arm.c (md_undefined_symbol): Issue a warning message
(if enabled) when the user creates a symbol with the same name as
an ARM instruction.
(flag_warn_syms): New static variable.
(arm_opts): Add mwarn-syms and mno-warn-syms.
* doc/c-arm.texi (ARM Options): Document the -m[no-]warn-syms
options.
PR gas/18353
* doc/as.texinfo (Zero): Add documentation of the .zero pseudo-op.
2015-04-29 Nick Clifton <nickc@redhat.com>
PR 18256
* config/tc-arm.c (encode_arm_cp_address): Issue an error message
if the operand is neither a register nor a vector.
2015-04-29 Nick Clifton <nickc@redhat.com>
* doc/as.texinfo (Set): Note that a symbol cannot be set multiple
times if the expression is not constant and the target uses linker
relaxation.
2015-04-28 Renlin Li <renlin.li@arm.com>
* config/tc-arm.c (arm_init_frag): Always emit mapping symbols.
2015-04-28 Nick Clifton <nickc@redhat.com>
PR 18313
* cond.c (s_if): Stop compile time warning about stopc being used
before it is set.
(s_ifc): Likewise.
2015-04-27 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (s_aarch64_inst): Don't align code for non-text
section.
(md_assemble): Likewise, move the align code outside the loop.
2015-04-24 Jim Wilson <jim.wilson@linaro.org>
* config/tc-aarch64.c (aarch64_cpus): Add CRC and CRYPTO features
for thunderx.
2015-04-24 Richard Earnshaw <rearnsha@arm.com>
* config/tc-arm.h (arm_min): New function.
(SUB_SEGMENT_ALIGN): Define.
2015-04-23 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (macro): State the recommended way of creating
32-bit or 64-bit addresses.
2015-04-23 Jan Beulich <jbeulich@suse.com>
* config/tc-i386.c (match_mem_size): Also allow no size
specification when broadcasting.
2015-04-20 H.J. Lu <hongjiu.lu@intel.com>
* doc/as.texinfo (Bundle directives): Shorten menu entry and
use @subsection.
(CFI directives): Use @subsection.
(SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
* doc/c-i386.texi (i386-Mnemonics): Use @subsection.
2015-04-17 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
* config/tc-avr.c (create_record_for_frag): Rename link to
prop_rec_link.
2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention
--compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
Add --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] This patch adds --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] to ld for ELF targets to support generating compressed DWARF debug sections. We always generate .zdebug_* section since section names have been finalized and they can't be changed easily when compression is being performed. bfd/ * bfd-in.h (compressed_debug_section_type): New. * compress.c (bfd_compress_section_contents): Add an argument for linker write compression and always generate .zdebug_* section when linking. (bfd_init_section_compress_status): Pass FALSE to bfd_compress_section_contents. (bfd_compress_section): New function. * elf.c (elf_fake_sections): For linking, set SEC_ELF_COMPRESS on DWARF debug sections if COMPRESS_DEBUG is set and rename section if COMPRESS_DEBUG_GABI_ZLIB isn't set. (assign_file_positions_for_non_load_sections): Set sh_offset to -1 if SEC_ELF_COMPRESS is set. (assign_file_positions_except_relocs): Likwise. (_bfd_elf_assign_file_positions_for_relocs): Renamed to ... (_bfd_elf_assign_file_positions_for_non_load): This. Change return time to bfd_boolean. Compress the section if SEC_ELF_COMPRESS is set. (_bfd_elf_write_object_contents): Updated. (_bfd_elf_set_section_contents): Write section contents to the buffer if SEC_ELF_COMPRESS is set. * merge.c: Include "elf-bfd.h". (sec_merge_emit): Add arguments for contents and offset. Write to contents with offset if contents isn't NULL. (_bfd_write_merged_section): Write section contents to the buffer if SEC_ELF_COMPRESS is set. Pass contents and output_offset to sec_merge_emit. * elflink.c (bfd_elf_final_link): Allocate the buffer for output section contents if SEC_ELF_COMPRESS is set. * section.c (SEC_ELF_COMPRESS): New. * bfd-in2.h: Regenerated. gas/ * as.h (compressed_debug_section_type): Removed. include/ * bfdlink.h (bfd_link_info): Add compress_debug. ld/ * ld.texinfo: Document --compress-debug-sections=. * ldmain.c (main): Set BFD_COMPRESS on output_bfd if COMPRESS_DEBUG is set. Set BFD_COMPRESS_GABI on output_bfd for COMPRESS_DEBUG_GABI_ZLIB. * lexsup.c (elf_static_list_options): Add --compress-debug-sections=. * emultempl/elf32.em (OPTION_COMPRESS_DEBUG): New. (xtra_long): Add "compress-debug-sections". (gld${EMULATION_NAME}_handle_option): Handle OPTION_COMPRESS_DEBUG. ld/testsuite/ * ld-elf/compress.exp (build_tests): Add tests for --compress-debug-sections=. (run_tests): Likewise. Add additonal tests for --compress-debug-sections=. * ld-elf/gabiend.rt: New file. * ld-elf/gabinormal.rt: Likewise. * ld-elf/gnubegin.rS: Likewise. * ld-elf/gnunormal.rS: Likewise. * ld-elf/zlibbegin.rS: Likewise. * ld-elf/zlibnormal.rS: Likewise.
2015-04-15 05:01:25 +00:00
2015-04-14 H.J. Lu <hongjiu.lu@intel.com>
* as.h (compressed_debug_section_type): Removed.
2015-04-14 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
(TC_FORCE_RELOCATION_SUB_SAME): Define.
(DWARF2_USE_FIXED_ADVANCE_PC): Define.
2015-04-10 Nick Clifton <nickc@redhat.com>
PR binutils/18198
* doc/c-arm.texi (ARM Options): Add a note about the interaction of
the -EB option with the linker's --be8 option.
2015-04-09 Hans-Peter Nilsson <hp@axis.com>
* doc/c-rx.texi: Fix markup typos in last change.
2015-04-09 Nick Clifton <nickc@redhat.com>
* config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
(md_longopts): Add -mno-allow-string-insns.
(md_parse_option): Handle -mno-allow-string-insns.
(md_show_usage): Mention -mno-allow-string-insns.
(rx_note_string_insn_use): New function. Produces an error
message if a string insn is used when it is not allowed.
* config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
(SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
* config/rx-defs.h (rx_note_string_insn_use): Prototype.
* doc/c-rx.texi: Document -mno-allow-string-insns.
Add SHF_COMPRESSED support to gas and objcopy This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi} options to gas and objcopy for ELF files. They control how DWARF debug sections are compressed. --compress-debug-sections=none is equivalent to --nocompress-debug-sections. --compress-debug-sections=zlib and --compress-debug-sections=zlib-gnu are equivalent to --compress-debug-sections. --compress-debug-sections=zlib-gabi compresses DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker changes are required to support SHF_COMPRESSED. bfd/ * archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI bit. * bfd.c (bfd::flags): Increase size to 18 bits. (BFD_COMPRESS_GABI): New. (BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. (bfd_update_compression_header): New fuction. (bfd_check_compression_header): Likewise. (bfd_get_compression_header_size): Likewise. (bfd_is_section_compressed_with_header): Likewise. * compress.c (MAX_COMPRESSION_HEADER_SIZE): New. (bfd_compress_section_contents): Return the uncompressed size if the full section contents is compressed successfully. Support converting from/to .zdebug* sections. (bfd_get_full_section_contents): Call bfd_get_compression_header_size to get compression header size. (bfd_is_section_compressed): Renamed to ... (bfd_is_section_compressed_with_header): This. Add a pointer argument to return compression header size. (bfd_is_section_compressed): Use it. (bfd_init_section_decompress_status): Call bfd_get_compression_header_size to get compression header size. Return FALSE if uncompressed section size is 0. * elf.c (_bfd_elf_make_section_from_shdr): Support converting from/to .zdebug* sections. * bfd-in2.h: Regenerated. binutils/ * objcopy.c (do_debug_sections): Add compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_options): Use optional_argument on compress-debug-sections. (copy_usage): Update --compress-debug-sections. (copy_file): Handle compress_zlib, compress_gnu_zlib and compress_gabi_zlib. (copy_main): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * doc/binutils.texi: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. binutils/testsuite/ * compress.exp: Add tests for --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * binutils-all/dw2-3.rS: New file. * binutils-all/dw2-3.rt: Likewise. * binutils-all/libdw2-compressedgabi.out: Likewise. gas/ * as.c (show_usage): Update --compress-debug-sections. (std_longopts): Use optional_argument on compress-debug-sections. (parse_args): Handle --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * as.h (compressed_debug_section_type): New. (flag_compress_debug): Change type to compressed_debug_section_type. --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. * write.c (compress_debug): Set BFD_COMPRESS_GABI for --compress-debug-sections=zlib-gabi. Call bfd_get_compression_header_size to get compression header size. Don't rename section name for --compress-debug-sections=zlib-gabi. * config/tc-i386.c (compressed_debug_section_type): Set to COMPRESS_DEBUG_ZLIB. * doc/as.texinfo: Document --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}. gas/testsuite/ * gas/i386/dw2-compressed-1.d: New file. * gas/i386/dw2-compressed-2.d: Likewise. * gas/i386/dw2-compressed-3.d: Likewise. * gas/i386/x86-64-dw2-compressed-2.d: Likewise. * gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1, dw2-compressed-3 and x86-64-dw2-compressed-2. ld/testsuite/ * ld-elf/compress.exp: Add a test for --compress-debug-sections=zlib-gabi. (build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi. (run_tests): Likewise. Verify linker output with zlib-gabi compressed debug input. * ld-elf/compressed1a.d: New file. * ld-elf/compressed1b.d: Likewise. * ld-elf/compressed1c.d: Likewise.
2015-04-08 14:53:54 +00:00
2015-04-08 H.J. Lu <hongjiu.lu@intel.com>
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
2015-04-07 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Use subseg_text_p.
(s_aarch64_inst): Likewise.
(md_assemble): Likewise.
2015-04-06 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Use bfd_putb64 to write uncompressed
section size.
2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header if
compressed section size is the same as before compression.
2015-04-02 Nick Clifton <nickc@redhat.com>
PR gas/18189
* config/tc-microblaze.c (parse_imm): Use offsetT as the type for
min and max parameters. Sign extend values before testing.
2015-04-02 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
(mapping_state_2): Don't emit MAP_DATA here.
(s_aarch64_inst): Align frag during state transition.
(md_assemble): Likewise.
2015-04-02 Ed Maste <emaste@freebsd.org>
* config/tc-aarch64.c (set_error_kind): Delete.
(set_error_message): Delete.
2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2015-04-01 Evandro Menezes <e.menezes@samsung.com>
* config/tc-aarch64.c: Add support for Samsung Exynos M1.
* doc/c-aarch64.texi (-mcpu=): Add "exynos-m1".
2015-04-01 Evandro Menezes <e.menezes@samsung.com>
* config/tc-arm.c: Add support for Samsung Exynos M1.
* doc/c-arm.texi (-mcpu=): Add "exynos-m1".
2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2015-03-31 Ed Schouten <ed@nuxi.nl>
* configure.tgt (fmt): Set to elf for *-*-cloudabi*.
2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
* configure.ac: Revert the AM_ZLIB change.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ZLIBINC): New.
(AM_CFLAGS): Add $(ZLIBINC).
* as.c: (show_usage): Don't check HAVE_ZLIB_H.
(parse_args): Likewise.
* compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
(compress_init): Don't check HAVE_ZLIB_H.
(compress_data): Likewise.
(compress_finish): Likewise.
* configure.ac (AM_ZLIB): Removed.
(zlibinc): New. AC_SUBST.
Add --with-system-zlib.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
2015-03-27 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_flags_set): Removed.
2015-03-25 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (mapping_state): Remove first MAP_DATA emitting
code.
(mapping_state_2): Emit first MAP_DATA symbol here.
2015-03-24 H.J. Lu <hongjiu.lu@intel.com>
PR gas/18087
* write.c (compress_debug): Don't write the zlib header if
compression didn't make the section smaller.
Extend arm_feature_set struct to provide more bits gas/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * config/tc-arm.c (no_cpu_selected): Use new macro to compare features. (parse_psr): Likewise. (do_t_mrs): Likewise. (do_t_msr): Likewise. (static const arm_feature_set arm_ext_*): Defined with new macros. (static const arm_feature_set arm_cext_*): Likewise. (static const arm_feature_set fpu_fpa_ext_*): Likewise. (static const arm_feature_set fpu_vfp_ext_*): Likewise. (deprecated_coproc_regs): Likewise. (UL_BARRIER): Likewise. (barrier_opt_names): Likewise. (arm_cpus): Likewise. (arm_extensions): Likewise. include/opcode/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * arm.h (arm_feature_set): Extended to provide more available * bits. (ARM_ANY): Updated to follow above new definition. (ARM_CPU_HAS_FEATURE): Likewise. (ARM_CPU_IS_ANY): Likewise. (ARM_MERGE_FEATURE_SETS): Likewise. (ARM_CLEAR_FEATURE): Likewise. (ARM_FEATURE): Likewise. (ARM_FEATURE_COPY): New macro. (ARM_FEATURE_EQUAL): Likewise. (ARM_FEATURE_ZERO): Likewise. (ARM_FEATURE_CORE_EQUAL): Likewise. (ARM_FEATURE_LOW): Likewise. (ARM_FEATURE_CORE_LOW): Likewise. (ARM_FEATURE_CORE_COPROC): Likewise. opcodes/ChangeLog: 2015-03-24 Terry Guo <terry.guo@arm.com> * arm-dis.c (opcode32): Updated to use new arm feature struct. (opcode16): Likewise. (coprocessor_opcodes): Replace bit with feature struct. (neon_opcodes): Likewise. (arm_opcodes): Likewise. (thumb_opcodes): Likewise. (thumb32_opcodes): Likewise. (print_insn_coprocessor): Likewise. (print_insn_arm): Likewise. (select_arm_features): Follow new feature struct.
2015-03-24 06:08:08 +00:00
2015-03-24 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (no_cpu_selected): Use new macro to compare
features.
(parse_psr): Likewise.
(do_t_mrs): Likewise.
(do_t_msr): Likewise.
(static const arm_feature_set arm_ext_*): Defined with new macros.
(static const arm_feature_set arm_cext_*): Likewise.
(static const arm_feature_set fpu_fpa_ext_*): Likewise.
(static const arm_feature_set fpu_vfp_ext_*): Likewise.
(deprecated_coproc_regs): Likewise.
(UL_BARRIER): Likewise.
(barrier_opt_names): Likewise.
(arm_cpus): Likewise.
(arm_extensions): Likewise.
Limit multi-byte nop instructions to 10 bytes There is no performance advantage to use multi-byte nop instructions greater than 10 bytes. This patch limits multi-byte nop instructions to 10 bytes. Since there is only one way to encode multi-byte nop instructions now, it also removed redundant nop tests. gas/ * config/tc-i386.c (i386_align_code): Limit multi-byte nop instructions to 10 bytes. gas/testsuite/ * gas/i386/i386.exp: Don't run nops-1-bdver1, nops-1-bdver2, nops-1-bdver3, nops-1-bdver4, nops-1-znver1, nops-1-btver1 nops-1-btver2, x86-64-nops-1-nocona, x86-64-nops-1-bdver1, x86-64-nops-1-bdver2, x86-64-nops-1-bdver3, x86-64-nops-1-bdver4, x86-64-nops-1-znver1, x86-64-nops-1-btver1 nor x86-64-nops-1-btver2. * gas/i386/nops-1-core2.d: Updated. * gas/i386/nops-1-k8.d: Likewise. * gas/i386/nops-4a-i686.d: Likewise. * gas/i386/nops-5-i686.d: Likewise. * gas/i386/nops-5.d: Likewise. * gas/i386/nops-6.d: Likewise. * gas/i386/x86-64-nops-1-core2.d: Likewise. * gas/i386/x86-64-nops-1-g64.d: Likewise. * gas/i386/x86-64-nops-1-k8.d: Likewise. * gas/i386/x86-64-nops-1.d: Likewise. * gas/i386/x86-64-nops-2.d: Likewise. * gas/i386/x86-64-nops-3.d: Likewise. * gas/i386/x86-64-nops-4-core2.d: Likewise. * gas/i386/x86-64-nops-4-k8.d: Likewise. * gas/i386/x86-64-nops-4.d: Likewise. * gas/i386/x86-64-nops-5-k8.d: Likewise. * gas/i386/x86-64-nops-5.d: Likewise. * gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise. * gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise. * gas/i386/ilp32/x86-64-nops-1.d: Likewise. * gas/i386/ilp32/x86-64-nops-2.d: Likewise. * gas/i386/ilp32/x86-64-nops-3.d: Likewise. * gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise. * gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise. * gas/i386/ilp32/x86-64-nops-4.d: Likewise. * gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise. * gas/i386/ilp32/x86-64-nops-5.d: Likewise. * gas/i386/nops-1-bdver1.d: Removed. * gas/i386/nops-1-bdver2.d: Likewise. * gas/i386/nops-1-bdver3.d: Likewise. * gas/i386/nops-1-bdver4.d: Likewise. * gas/i386/nops-1-btver1.d: Likewise. * gas/i386/nops-1-btver2.d: Likewise. * gas/i386/nops-1-znver1.d: Likewise. * gas/i386/x86-64-nops-1-bdver1.d: Likewise. * gas/i386/x86-64-nops-1-bdver2.d: Likewise. * gas/i386/x86-64-nops-1-bdver3.d: Likewise. * gas/i386/x86-64-nops-1-bdver4.d: Likewise. * gas/i386/x86-64-nops-1-btver1.d: Likewise. * gas/i386/x86-64-nops-1-btver2.d: Likewise. * gas/i386/x86-64-nops-1-nocona.d: Likewise. * gas/i386/x86-64-nops-1-znver1.d: Likewise. * gas/i386/ilp32/x86-64-nops-1-nocona.d: Likewise.
2015-03-20 11:39:04 +00:00
2015-03-20 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (i386_align_code): Limit multi-byte nop
instructions to 10 bytes.
2015-03-19 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.c (enum options): Add G13 and G14.
(md_longopts): Add -mg13 and -mg14.
(md_parse_option): Handle -mg13 and -mg14.
(md_show_usage): List -mg13 and -mg14.
* doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
2015-03-18 Jon Turney <jon.turney@dronecode.org.uk>
Nick Clifton <nickc@redhat.com>
PR binutils/18087
* doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
2015-03-17 16:19:15 +00:00
2015-03-17 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com>
* config/tc-i386.c (cpu_arch): Add PROCESSOR_ZNVER flags.
(i386_align_code): Add PROCESSOR_ZNVER cases.
* config/tc-i386.h (processor_type): Add PROCESSOR_ZNVER.
* doc/c-i386.texi: Add znver1 and clzero.
2015-03-16 Nick Clifton <nickc@redhat.com>
* dwarf2dbg.c (out_header): Remove spurious #if 1.
2015-03-13 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (warn_unpredictable_ldst): Don't warn on reg
number 31.
2015-03-13 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.h (SUB_SEGMENT_ALIGN): Define to be zero.
2015-03-12 Andrew Bennett <andrew.bennett@imgtec.com>
* config/tc-mips.c (mips_cpu_info_table): Add i6400 entry.
* doc/c-mips.texi: Document i6400 -march option.
2015-03-12 Nick Clifton <nickc@redhat.com>
PR gas/17444
* config/tc-arm.h (MD_APPLY_SYM_VALUE): Pass the current segment
to arm_apply_sym_value. Update prototype.
* config/tc-arm.c (arm_apply_sym_value): Add segment argument.
Do not apply the value if the symbol is in a different segment to
the current segment.
2015-03-11 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (md_assemble): Don't abort on 8 byte insn fixups.
(md_apply_fix): Report an error on data-only fixups used with insns.
2015-03-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Check for valid
length field operands.
2015-03-10 Michael Perkins <perkinsmg75@yahoo.co.uk>
* config/tc-arm.c (parse_operands): Fix bug setting writeback
values for '^' on OP_REGLSTs.
(do_push_pop): Add new writeback constraint.
2015-03-10 Renlin Li <renlin.li@arm.com>
* config/tc-arm.c (mapping_state): Remove first MAP_DATA emitting code.
(mapping_state_2): Emit first MAP_DATA symbol here.
2015-03-10 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (mapping_state): Set minimum alignment for
code sections.
2015-03-10 Nick Clifton <nickc@redhat.com>
PR gas/17852
* config/tc-arm.c (md_begin): Ensure that selected_cpu is
initialised when CPU_DEFAULT is defined.
2015-03-05 Nick Clifton <nickc@redhat.com>
* config/tc-v850.c (md_parse_option): Fix code to set or clear
EF_RH850_DATA_ALIGN8 bit in ELF header, based upon the use of the
-m8byte-align and -m4byte-align command line options.
2015-03-04 Richard Sandiford <richard.sandiford@arm.com>
PR gas/17843
* config/tc-aarch64.c (process_movw_reloc_info): Allow
R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
for MOVK.
2015-02-28 Alan Modra <amodra@gmail.com>
* write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
end to their alignment.
2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Generate
BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21.
(md_apply_fix, aarch64_force_relocation): Handle
BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Generate
BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
(md_apply_fix, aarch64_force_relocation): Handle
BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
2015-02-19 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Generate
BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
(md_apply_fix, aarch64_force_relocation): Handle
BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Add ld_literal_type.
(reloc_table): Likewise.
(parse_address_main): Use ld_literal_type.
2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (reloc_table_entry): Add adr_type.
(reloc_table): Likewise.
(parse_address_main): Use adr_type.
2015-02-13 06:02:52 +00:00
2015-02-26 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (aarch64_arch_any, aarch64_arch_node): Remove.
avr/gas: Write out data to track .org/.align usage. Adds support to the assembler to write out data for tracking the use of .org and .align directives. This data is collected within the assembler and written out to a section ".avr.prop" (if there's anything to write out). This patch does not add any tests. The next patch in this series will add a better mechanism for visualising the contents of .avr.prop which will make writing tests much easier. This patch also does not make any use of this collected data, that will also come along in a later patch; the intended consumer is the linker, during linker relaxation this information will be used to ensure that the .org and .align directives are honoured. bfd/ChangeLog: * elf32-avr.h (AVR_PROPERTY_RECORD_SECTION_NAME): Define. (AVR_PROPERTY_RECORDS_VERSION): Define. (AVR_PROPERTY_SECTION_HEADER_SIZE): Define. (struct avr_property_record): New structure. gas/ChangeLog: * config/tc-avr.c: Add elf32-avr.h include. (struct avr_property_record_link): New structure. (avr_output_property_section_header): New function. (avr_record_size): New function. (avr_output_property_record): New function. (avr_create_property_section): New function. (avr_handle_align): New function. (exclude_section_from_property_tables): New function. (create_record_for_frag): New function. (append_records_for_section): New function. (avr_create_and_fill_property_section): New function. (avr_post_relax_hook): New function. * config/tc-avr.h (md_post_relax_hook): Define. (avr_post_relax_hook): Declare. (HANDLE_ALIGN): Define. (avr_handle_align): Declare. (strut avr_frag_data): New structure. (TC_FRAG_TYPE): Define.
2015-01-08 20:55:10 +00:00
2015-02-25 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-avr.c: Add elf32-avr.h include.
(struct avr_property_record_link): New structure.
(avr_output_property_section_header): New function.
(avr_record_size): New function.
(avr_output_property_record): New function.
(avr_create_property_section): New function.
(avr_handle_align): New function.
(exclude_section_from_property_tables): New function.
(create_record_for_frag): New function.
(append_records_for_section): New function.
(avr_create_and_fill_property_section): New function.
(avr_post_relax_hook): New function.
* config/tc-avr.h (md_post_relax_hook): Define.
(avr_post_relax_hook): Declare.
(HANDLE_ALIGN): Define.
(avr_handle_align): Declare.
(strut avr_frag_data): New structure.
(TC_FRAG_TYPE): Define.
2015-02-25 Matthew Wahab <matthew.wahab@arm.com>
* doc/c-arm.texi (-mcpu=): Add cortex-a53, cortex-a57 and
cortex-a72.
Adds support for generating notes in V850 binaries. bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas style note entry. (v850_elf_make_note_section): New function. Creates a note section. (v850_elf_create_sections): New function. Create a note section if one is not already present. (v850_elf_set_note): New function. Adds a note to a bfd. (v850_elf_copy_private_bfd_data): New function. Copies V850 notes. (v850_elf_merge_notes): New function. Merges V850 notes. (print_v850_note): New function. Displays a V850 note. (v850_elf_print_notes): New function. Displays all notes attached to a bfd. (v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes. (v850_elf_print_private_bfd_data): Call v850_elf_print_notes. (v850_elf_fake_sections): Set the type of the V850 note section. * bfd-in.h (v850_elf_create_sections): Add prototype. (v850_elf_set_note): Add prototype. * bfd-in2.h: Regenerate. binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine flags. (get_v850_section_type_name): New function. Handles V850 special sections. (get_section_type_name): Add support for V850. (get_v850_elf_note_type): New function. Returns the name of a V850 note. (print_v850_note): New function. Prints a V850 note. (process_v850_notes): New function. Prints V850 notes. (process_note_sections): Add support for V850. binutils/testsute * binutils-all/objcopy.exp: Skip the strip-10 test for the V850. gas * config/tc-v850.c (soft_float): New variable. (v850_data_8): New variable. (md_show_usage): Add -msoft-float/-mhard-float. (md_parse_option): Likewise. (md_begin): Set the default value of soft_float. (v850_md_end): New function. Creates a note section. * config/tc-v850.h (md_end): Define. * doc/c-v850.texi: Document -msoft-float/-mhard-float. gas/testsuite * gas/elf/elf.exp: Add special version of the section2 test for the V850. * gas/elf/section2.e-v850: New file. include/elf * v850.h (EF_RH850_SIMD): Delete deprecated flag. (EF_RH850_CACHE): Likewise. (EF_RH850_MMU): Likewise. (EF_RH850_DATA_ALIGN8): Likewise. (SHT_RENESAS_IOP): Fix typo in name. (SHT_RENESAS_INFO): Define. (V850_NOTE_SECNAME): Define. (SIZEOF_V850_NOTE): Define. (V850_NOTE_NAME): Define. (enum v850_notes): New enum. (NUM_V850_NOTES): Define. ld/ChangeLog 2015-02-24 Nick Clifton <nickc@redhat.com> * Makefile.am (ev850.c): Add dependency upon $(srcdir)/emultempl/v850elf.em. (ev850_rh850.c): Likewise. * Makefile.in: Regenerate. * emultempl/v850elf.em: New file. * emulparams/v850.sh (EXTRA_EM_FILE): Define. * emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define. * scripttempl/v850.sc: Add .note.renesas section. * scripttempl/v850_rh850.sc: Likewise. ld/testsuite * ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
2015-02-24 17:54:09 +00:00
2015-02-24 Nick Clifton <nickc@redhat.com>
* config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
2015-02-23 Yoshinori Sato <ysato@users.sourceforge.jp>
* config/tc-h8300.c (line_separater_chars): Add a version for
h8300-linux that includes a separator.
(default_mach): New variable.
(md_main): Use it.
(md_longopts): Add '--march' option.
(md_parse_option): Parse the new option.
* config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
* configure.tgt: Add h8300-*-linux
* doc/c-h8300.texi: Document --march.
2015-02-23 Nick Clifton <nickc@redhat.com>
PR 17940
* dwarf2dbg.c (out_header): When generating dwarf sections use
real symbols not temps for the start and end symbols.
* config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
adjustments to relocations in debug sections.
(TC_LINKRELAX_FIXUP): Likewise.
2015-02-19 Alan Modra <amodra@gmail.com>
* doc/as.texinfo (Local Symbol Names): Don't use ':' in pxref.
* doc/c-i386.texi: Reorder i386-Bugs after i386-Arch.
2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Fix code formatting.
2015-02-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c: Add support for Cortex-A72.
2015-02-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (warn_deprecated_sp): Use as_tsktsk instead
of as_warn for deprecation messages.
(encode_arm_addr_mode_2): Likewise.
(check_obsolete): Likewise.
(do_rd_rm_rn): Likewise.
(do_co_reg): Likewise.
(do_setend): Likewise.
(do_t_mov_cmp): Likewise.
(do_neon_ldr_str): Likewise.
(opcode_lookup): Likewise.
(if_fsm_post_encode): Likewise.
(md_assemble): Likewise.
2015-02-06 Jan Beulich <jbeulich@suse.com>
* dw2gencfi.c (select_cie_for_fde): Also bail on CFI_label.
(cfi_change_reg_numbers): Also do nothing for CFI_label.
(cfi_pseudo_table): Also handle .cfi_label when not supporting
CFI directives.
2015-02-05 Alan Modra <amodra@gmail.com>
* config/tc-msp430.c (md_assemble): Correct size passed to
extract_cmd. Remove index check.
2015-02-04 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add support for Cortex-A72.
* doc/c-aarch64.texi (-mcpu=): Add "cortex-a72".
2015-02-04 Nick Clifton <nickc@redhat.com>
* config/rl78-parse.y (addsubw): Fix encoding of [HL] variant of
these instructions.
2015-02-03 Renlin Li <renlin.li@arm.com>
* doc/c-aarch64.texi (.arch): Document the directive.
(.arch_extension): Likewise.
2015-02-03 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.h (TC_PARSE_CONS_EXPRESSION): Define.
FT32 initial support FT32 is a new 32-bit RISC core developed by FTDI for embedded applications. * configure.ac: Add FT32 support. * configure: Regenerate. bfd/ * Makefile.am: Add FT32 files. * archures.c (enum bfd_architecture): Add bfd_arch_ft32. (bfd_mach_ft32): Define. (bfd_ft32_arch): Declare. (bfd_archures_list): Add bfd_ft32_arch. * config.bfd: Handle FT32. * configure.ac: Likewise. * cpu-ft32.c: New file. * elf32-ft32.c: New file. * reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17, BFD_RELOC_FT32_18): Define. * targets.c (_bfd_target_vector): Add ft32_elf32_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * readelf.c: Add FT32 support. gas/ * Makefile.am: Add FT32 files. * config/tc-ft32.c: New file. * config/tc-ft32.h: New file. * configure.tgt: Add FT32 support. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/ft32/ft32.exp: New file. * gas/ft32/insn.d: New file. * gas/ft32/insn.s: New file. include/ * dis-asm.h (print_insn_ft32): Declare. include/elf/ * common.h (EM_FT32): Define. * ft32.h: New file. include/opcode/ * ft32.h: New file. ld/ * Makefile.am: Add FT32 files. * configure.tgt: Handle FT32 target. * emulparams/elf32ft32.sh: New file. * scripttempl/ft32.sc: New file. * Makefile.in: Regenerate. opcodes/ * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
2015-01-28 05:06:43 +00:00
2015-01-28 James Bowman <james.bowman@ftdichip.com>
* Makefile.am: Add FT32 files.
* config/tc-ft32.c: New file.
* config/tc-ft32.h: New file.
* configure.tgt: Add FT32 support.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* config/tc-nds32.c (do_pseudo_la_internal): Limit the second argument
of instruction la to a symbol.
2015-01-27 03:08:07 +00:00
2015-01-27 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* config/tc-nds32.c (nds32_parse_name): Ignore when the input is
section name.
2015-01-19 Alan Modra <amodra@gmail.com>
* read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
* write.c (get_frag_for_reloc): Allow match just past end of frag.
S/390: Add support for IBM z13. - 32 128 bit vector registers (overlapping with the existing 16 64 bit floating point registers) - vector double instructions - vector integer instructions - scalar vector instructions (allowing to have more floating point registers for scalar operations) - vector string instructions gas/ChangeLog: * config/tc-s390.c (struct pd_reg): Remove. (pre_defined_registers): Remove. (REG_NAME_CNT): Remove. (reg_name_search): Calculate the register number instead of doing a lookup. (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new reg_name_search signature. (s390_parse_cpu): Support the new arch string z13. (s390_insert_operand): Support for vector registers with the extra field for the fifth bit of each vector register operand. (md_gather_operand): Adjust to the new handling of optional parameters. * doc/as.texinfo: Document the z13 cpu string. gas/testsuite/ChangeLog: * gas/s390/esa-g5.d: Add a variant without the optional operand. * gas/s390/esa-g5.s: Likewise. * gas/s390/esa-z9-109.d: Likewise. * gas/s390/esa-z9-109.s: Likewise. * gas/s390/zarch-z9-109.d: Likewise. * gas/s390/zarch-z9-109.s: Likewise. * gas/s390/zarch-z10.d: For variants with a zero optional argument it is not dumped by objdump anymore. * gas/s390/zarch-zEC12.d: Likewise. * gas/s390/zarch-z13.d: New file. * gas/s390/zarch-z13.s: New file. * gas/s390/s390.exp: Run the test for the z13 files. include/opcode/ChangeLog: * s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13. ld/testsuite/ChangeLog: * ld-s390/tlsbin.dd: The nopr register operand is optional and not printed if 0 anymore. opcodes/ChangeLog: * s390-dis.c (s390_extract_operand): Support vector register operands. (s390_print_insn_with_opcode): Support new operands types and add new handling of optional operands. * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove and include opcode/s390.h instead. (struct op_struct): New field `flags'. (insertOpcode, insertExpandedMnemonic): New parameter `flags'. (dumpTable): Dump flags. (main): Parse flags from the s390-opc.txt file. Add z13 as cpu string. * s390-opc.c: Add new operands types, instruction formats, and instruction masks. (s390_opformats): Add new formats for .insn. * s390-opc.txt: Add new instructions.
2015-01-16 11:19:21 +00:00
2015-01-16 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
2015-01-13 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (parse_ifimm_zero): Accept #0x0 as a synonym for
#0, restoring previous behaviour.
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
(cfi_pseudo_table): Add "cfi_label".
(output_cfi_insn): Handle CFI_label.
(select_cie_for_fde): Als terminate CIE when encountering
CFI_label.
* dw2gencfi.h (cfi_add_label): Declare.
(struct cfi_insn_data): New member "sym_name".
(CFI_label): New.
* read.c (read_symbol_name): Drop "static".
* read.h (read_symbol_name): Declare.
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_shl_imm): Check immediate range.
(do_neon_qshl_imm): Likewise.
2015-01-12 Alan Modra <amodra@gmail.com>
* read.c (s_altmacro, s_reloc): Make definition static.
2015-01-10 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-avr.c (md_apply_fix): Update the contents of VALP for
diff fixups.
2015-01-09 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
X-Gene 2.
* doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
2015-01-07 Jan Beulich <jbeulich@suse.com>
* config/tc-arm.c (struct arm_option_extension_value_table):
Split field "value" into fields "merge_value" and "clear_value".
(arm_extensions): Adjust initializer accordingly.
2015-01-01 Alan Modra <amodra@gmail.com>
* as.c (parse_args): Just print current year.
2015-01-01 Alan Modra <amodra@gmail.com>
2014-12-27 15:57:04 +00:00
Update year range in copyright notice of all files.
2014-12-27 15:57:04 +00:00
For older changes see ChangeLog-2014
2002-01-07 12:12:47 +00:00
Copyright (C) 2015 Free Software Foundation, Inc.
2012-12-10 12:48:03 +00:00
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
2002-01-07 12:12:47 +00:00
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: