mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-17 09:24:48 +00:00
043e6e72c0
Co-authored-by: kevinmgee <kevingee@kevingee.biz> Co-authored-by: Drashna Jaelre <drashna@live.com>
77 lines
No EOL
4.1 KiB
Markdown
77 lines
No EOL
4.1 KiB
Markdown
# mini42
|
|
|
|
|
|
|
|
|
|
*A pre-built, low profile, split mechanical keyboard based on the RP2040 processor*
|
|
|
|
* Keyboard Maintainer: [Kevin Gee](https://github.com/controller-works)
|
|
* Hardware Supported: *mini42 split ergonomic keyboard*
|
|
* Hardware Availability: *https://controller.works/products/mini42-low-profile-ergonomic-keyboard* Hardware is available as pre-built units only.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
```sh
|
|
make controllerworks/mini42:default
|
|
```
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
```sh
|
|
make controllerworks/mini42:default:flash
|
|
```
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Features
|
|
- Highly integrated design with microcontroller, USB and TRRS connectors, and OLED all integrated on the main board with no secondary modules
|
|
- RP2040 processor by Raspberry Pi Foundation running at 130 MHz with 16MB flash memory
|
|
- CNC milled aluminum case with only 8mm thickness
|
|
- "PCB art" shine through back plate with gold surface finish
|
|
- 128x32 OLED on each keyboard half
|
|
- 42 per-key RGB LEDs and 12 backlight RGB LEDS are individually addressable
|
|
- ESD and over-current protection on USB and TRRS connectors
|
|
- Reset and boot tactile switches
|
|
- USB C host connection
|
|
- Hot swap connectors for Kailh Chocolate PG1350 switches
|
|
- Chocolate key spacing (18mm horizontal x 17mm vertical)
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the upper left key on the left hand keyboard half or the upper right key on the right hand keyboard half while plugging in USB
|
|
* **Physical reset button**: Press the RST button twice, rapidly
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
## Pin Assignment
|
|
| Name | Pin | Left Row | Left Column | Right Row | **Right Column |
|
|
|--------|------|-----------|-------------|-----------|--------------|
|
|
| LED | GP0 | | | | |
|
|
| DATA | GP1 | | | | |
|
|
| DATA2* | GP28 | | | | |
|
|
| KEY0 | GP2 | 0 | 0 | 4 | 0 |
|
|
| KEY1 | GP3 | 0 | 1 | 4 | 1 |
|
|
| KEY2 | GP4 | 0 | 2 | 4 | 2 |
|
|
| KEY3 | GP5 | 0 | 3 | 4 | 3 |
|
|
| KEY4 | GP6 | 0 | 4 | 4 | 4 |
|
|
| KEY5 | GP7 | 0 | 5 | 4 | 5 |
|
|
| KEY6 | GP8 | 1 | 0 | 5 | 0 |
|
|
| KEY7 | GP9 | 1 | 1 | 5 | 1 |
|
|
| KEY8 | GP10 | 1 | 2 | 5 | 2 |
|
|
| KEY9 | GP11 | 1 | 3 | 5 | 3 |
|
|
| KEY10 | GP12 | 1 | 4 | 5 | 4 |
|
|
| KEY11 | GP13 | 1 | 5 | 5 | 5 |
|
|
| KEY12 | GP14 | 2 | 0 | 6 | 0 |
|
|
| KEY13 | GP15 | 2 | 1 | 6 | 1 |
|
|
| KEY14 | GP16 | 2 | 2 | 6 | 2 |
|
|
| KEY15 | GP17 | 2 | 3 | 6 | 3 |
|
|
| KEY16 | GP18 | 2 | 4 | 6 | 4 |
|
|
| KEY17 | GP19 | 2 | 5 | 6 | 5 |
|
|
| KEY18 | GP20 | 3 | 0 | 7 | 0 |
|
|
| KEY19 | GP21 | 3 | 1 | 7 | 1 |
|
|
| KEY20 | GP22 | 3 | 2 | 7 | 2 |
|
|
| SDA | GP24 | | | | |
|
|
| SCL | GP25 | | | | |
|
|
|
|
\*DATA2 on production units, not connected on prototype units
|
|
|
|
\** Right Column numbers run right (pinky position) to left (thumb position) |