mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-19 03:36:28 +00:00
3d7428a333
* preliminary Gray COD67 checkin * Get part of the switch matrix prepped * finish switch matrix * mock the pins and keymap for now * add keymap fixes * update readme with flashing instructions * keymap fix * Add more flashing and notes info to readme * remove un needed file * fix comments * add QMK Configurator Support
32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
# Gray COD67
|
|
|
|
|
|
|
|
The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port.
|
|
|
|
There were only 75 units made worldwide.
|
|
|
|
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
|
|
Hardware Supported: Gray COD67
|
|
Hardware Availability: [Zfrontier](https://en.zfrontier.com/products/cod67)
|
|
|
|
At this time, flashing ONLY works on Windows systems.
|
|
|
|
To put in bootloader mode, hold the `Esc` key while plugging in the USB cable.
|
|
|
|
The COD67 will show up as a drive.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make cod67:default:bin
|
|
|
|
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
|
|
|
Rename the resulting `.bin` file to `cod67.bin`.
|
|
|
|
Drag and drop `cod67.bin` to the drive, overwriting the previous `cod67.bin` stored on it.
|
|
|
|
Press the `Esc` key again to reset the board. You are now ready to type!
|
|
|
|
## Notes
|
|
The backlight pin is attached to a non PWM pin `D4` so backlight is only on/off.
|