qmk_firmware/keyboards/keycapsss/3w6_2040/readme.md
Tom Barnes 68afa1ef06
[keyboard] Add Keycapsss 3w6_2040 (#22642)
* initial commit

* tidy info.json, add readme.md

* correct license headers

* fix some minor typos

* additions to readme

* try and conform to standards

* remove duplicates from config.h

* remove unneccessary line from rules.mk

* further tidying

* some small misses

* some small misses

* repair via keymap

* actually fixed, d'oh

* Update keyboards/keycapsss/3w6_2040/info.json

Co-authored-by: jack <0x6a73@protonmail.com>

* Update keyboards/keycapsss/3w6_2040/info.json

Co-authored-by: jack <0x6a73@protonmail.com>

* Update keyboards/keycapsss/3w6_2040/keymaps/default/keymap.c

Co-authored-by: jack <0x6a73@protonmail.com>

* Update keyboards/keycapsss/3w6_2040/info.json

Co-authored-by: jack <0x6a73@protonmail.com>

* Update keyboards/keycapsss/3w6_2040/keymaps/via/keymap.c

Co-authored-by: jack <0x6a73@protonmail.com>

* Update keyboards/keycapsss/3w6_2040/readme.md

Co-authored-by: jack <0x6a73@protonmail.com>

* remove via config.h

---------

Co-authored-by: jack <0x6a73@protonmail.com>
2023-12-13 12:40:33 -07:00

1.4 KiB

3w6_2040

image

A split keyboard with 3x5 vertically staggered keys and 3 thumb keys, with support for pimoroni trackball modules on each half.

This version is distinct from keyboards/3w6 and is exclusive to keycapsss.com.

  • Keyboard Maintainer: [@keyboard-magpie]
  • Hardware Supported: On board rp2040 microcontrollers.
  • Hardware Availability: keycapsss.com

Make firmware .uf2 for this keyboard (after setting up your build environment):

qmk compile -kb keycapsss/3w6_2040 -km default

Example of flashing this keyboard:

qmk flash -kb keycapsss/3w6_2040 -km default (or drag and drop the uf2 from the above command into the mass storage device that appears when in bootloader mode)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Press and hold the button on the front of the PCB when plugging in.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available