mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-16 08:56:11 +00:00
622e94c6cd
* Add S7 Elephant Rev2 Support * Apply suggestions from code review I tested the changes on my board as well, thanks for the suggestions! * Added a default folder in the makefile so that this would no longer be a breaking change
20 lines
1.1 KiB
Markdown
20 lines
1.1 KiB
Markdown
# S7 Elephant
|
|
|
|
|
|
|
|
A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack.
|
|
|
|
**Firmware files are SPECIFIC to each revision. Firmware files from rev1 will not work on rev2 and vice versa.** Please use the `.hex` appropriate for your board.
|
|
|
|
* Keyboard Maintainer: QMK Community
|
|
* Hardware Supported: S7 Elephant rev1, rev2
|
|
* Hardware Availability: [The GB has had 2 rounds with little chance to run again.](https://geekhack.org/index.php?topic=96434.0)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make s7_elephant/rev1:default # 2018 run
|
|
make s7_elephant/rev2:default # 2019 run
|
|
|
|
To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|