qmk_firmware/keyboards/takashicompany/center_enter/readme.md
2022-08-20 11:34:17 +01:00

29 lines
1.3 KiB
Markdown

# Center x Enter
![image](https://raw.githubusercontent.com/takashicompany/center-enter/master/images/qmk.jpg)
A 30% keyboard with the enter key placed in the center.
Option to install a rotary encoder is also available.
VIA (Remap) is also supported.
* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
* Hardware Supported: Center x Enter PCB, Pro Micro
* Hardware Availability: https://github.com/takashicompany/center-enter
Make example for this keyboard (after setting up your build environment):
make takashicompany/center_enter:default
Flashing example for this keyboard:
make takashicompany/center_enter:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available