These keys were previously in each other's positions.
10 KiB
Keymap FAQ
This page covers questions people often have about keymaps. If you haven't you should read Keymap Overview first.
What Keycodes Can I Use?
See Keycodes for an index of keycodes available to you. These link to more extensive documentation when available.
Keycodes are actually defined in common/keycode.h.
What Are the Default Keycodes?
There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JIS. North America primarily uses ANSI, Europe and Africa primarily use ISO, and Japan uses JIS. Regions not mentioned typically use either ANSI or ISO. The keycodes corresponding to these layouts are shown here:
Some Of My Keys Are Swapped Or Not Working
QMK has two features, Bootmagic and Command, which allow you to change the behavior of your keyboard on the fly. This includes, but is not limited to, swapping Ctrl/Caps, disabling Gui, swapping Alt/Gui, swapping Backspace/Backslash, disabling all keys, and other behavioral modifications.
As a quick fix try holding down Space
+Backspace
while you plug in your keyboard. This will reset the stored settings on your keyboard, returning those keys to normal operation. If that doesn't work look here:
The Menu Key Isn't Working
The key found on most modern keyboards that is located between KC_RGUI
and KC_RCTL
is actually called KC_APP
. This is because when that key was invented there was already a key named MENU
in the relevant standards, so MS chose to call that the APP
key.
KC_SYSREQ
Isn't Working
Use keycode for Print Screen(KC_PSCREEN
or KC_PSCR
) instead of KC_SYSREQ
. Key combination of 'Alt + Print Screen' is recognized as 'System request'.
See issue #168 and
Power Keys Aren't Working
Somewhat confusingly, there are two "Power" keycodes in QMK: KC_POWER
in the Keyboard/Keypad HID usage page, and KC_SYSTEM_POWER
(or KC_PWR
) in the Consumer page.
The former is only recognized on macOS, while the latter, KC_SLEP
and KC_WAKE
are supported by all three major operating systems, so it is recommended to use those instead. Under Windows, these keys take effect immediately, however on macOS they must be held down until a dialog appears.
One Shot Modifier
Solves my personal 'the' problem. I often got 'the' or 'THe' wrongly instead of 'The'. One Shot Shift mitigates this for me. https://github.com/tmk/tmk_keyboard/issues/67
Modifier/Layer Stuck
Modifier keys or layers can be stuck unless layer switching is configured properly.
For Modifier keys and layer actions you have to place KC_TRANS
on same position of destination layer to unregister the modifier key or return to previous layer on release event.
- https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching
- http://geekhack.org/index.php?topic=57008.msg1492604#msg1492604
- https://github.com/tmk/tmk_keyboard/issues/248
Mechanical Lock Switch Support
This feature is for mechanical lock switch like this Alps one. You can enable it by adding this to your config.h
:
#define LOCKING_SUPPORT_ENABLE
#define LOCKING_RESYNC_ENABLE
After enabling this feature use keycodes KC_LCAP
, KC_LNUM
and KC_LSCR
in your keymap instead.
Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. You don't need this feature in most case and just use keycodes KC_CAPS
, KC_NLCK
and KC_SLCK
.
Input Special Characters Other Than ASCII like Cédille 'Ç'
NO UNIVERSAL METHOD TO INPUT THOSE WORKS OVER ALL SYSTEMS. You have to define MACRO in way specific to your OS or layout.
See this post for example MACRO code.
http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-120.html#p195620
On Windows you can use AltGr
key or Alt code.
On Mac OS defines Option
key combinations.
On Xorg you can use compose
key, instead.
And see this for Unicode input.
Fn
Key on macOS
Unlike most Fn keys, the one on Apple keyboards actually has its own keycode... sort of. It takes the place of the sixth keycode in a basic 6KRO HID report -- so an Apple keyboard is in fact only 5KRO.
It is technically possible to get QMK to send this key. However, doing so requires modification of the report format to add the state of the Fn key. Even worse, it is not recognized unless the keyboard's VID and PID match that of a real Apple keyboard. The legal issues that official QMK support for this feature may create mean it is unlikely to happen.
See this issue for detailed information.
Media Control Keys in Mac OSX
KC_MNXT and KC_MPRV Does Not Work on Mac
Use KC_MFFD
(KC_MEDIA_FAST_FORWARD
) and KC_MRWD
(KC_MEDIA_REWIND
) instead of KC_MNXT
and KC_MPRV
.
See https://github.com/tmk/tmk_keyboard/issues/195
Keys Supported in Mac OSX?
You can know which keycodes are supported in OSX from this source code.
usb_2_adb_keymap
array maps Keyboard/Keypad Page usages to ADB scancodes(OSX internal keycodes).
https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/Cosmo_USB2ADB.c
And IOHIDConsumer::dispatchConsumerEvent
handles Consumer page usages.
https://opensource.apple.com/source/IOHIDFamily/IOHIDFamily-606.1.7/IOHIDFamily/IOHIDConsumer.cpp
JIS Keys in Mac OSX
Japanese JIS keyboard specific keys like 無変換(Muhenkan)
, 変換(Henkan)
, ひらがな(hiragana)
are not recognized on OSX. You can use Seil to enable those keys, try following options.
- Enable NFER Key on PC keyboard
- Enable XFER Key on PC keyboard
- Enable KATAKANA Key on PC keyboard
https://pqrs.org/osx/karabiner/seil.html
RN-42 Bluetooth Doesn't Work with Karabiner
Karabiner - Keymapping tool on Mac OSX - ignores inputs from RN-42 module by default. You have to enable this option to make Karabiner working with your keyboard. https://github.com/tekezo/Karabiner/issues/403#issuecomment-102559237
See these for the detail of this problem. https://github.com/tmk/tmk_keyboard/issues/213 https://github.com/tekezo/Karabiner/issues/403
Esc and `
on a Single Key
See the Grave Escape feature.
Arrow on Right Modifier Keys with Dual-Role
This turns right modifier keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed TAP.
#include "keymap_common.h"
/* Arrow keys on right modifier keys with TMK dual role feature
*
* https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#213-modifier-with-tap-keydual-role
* https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
*/
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* 0: qwerty */
[0] = KEYMAP( \
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NUHS,BSPC, \
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, ESC, \
FN4, LGUI,LALT, SPC, APP, FN2, FN1, FN3),
[1] = KEYMAP( \
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,\
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN5, TRNS, \
TRNS,TRNS,TRNS, TRNS, TRNS,FN7, FN6, FN8),
};
const uint16_t PROGMEM fn_actions[] = {
[0] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
[1] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
[2] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
[3] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
[4] = ACTION_LAYER_MOMENTARY(1),
[5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_PGUP),
[6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_PGDN),
[7] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_HOME),
[8] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_END),
};
Dual-role key: https://en.wikipedia.org/wiki/Modifier_key#Dual-role_keys
Eject on Mac OSX
KC_EJCT
keycode works on OSX. https://github.com/tmk/tmk_keyboard/issues/250
It seems Windows 10 ignores the code and Linux/Xorg recognizes but has no mapping by default.
Not sure what keycode Eject is on genuine Apple keyboard actually. HHKB uses F20
for Eject key(Fn+f
) on Mac mode but this is not same as Apple Eject keycode probably.
What's weak_mods
and real_mods
in action_util.c
TO BE IMPROVED
real_mods is intended to retains state of real/physical modifier key state, while weak_mods retains state of virtual or temporary modifiers which should not affect state real modifier key.
Let's say you hold down physical left shift key and type ACTION_MODS_KEY(LSHIFT, KC_A),
with weak_mods,
- (1) hold down left shift: real_mods |= MOD_BIT(LSHIFT)
- (2) press ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods |= MOD_BIT(LSHIFT)
- (3) release ACTION_MODS_KEY(LSHIFT, KC_A): weak_mods &= ~MOD_BIT(LSHIFT) real_mods still keeps modifier state.
without weak mods,
- (1) hold down left shift: real_mods |= MOD_BIT(LSHIFT)
- (2) press ACTION_MODS_KEY(LSHIFT, KC_A): real_mods |= MOD_BIT(LSHIFT)
- (3) release ACTION_MODS_KEY(LSHIFT, KC_A): real_mods &= ~MOD_BIT(LSHIFT) here real_mods lost state for 'physical left shift'.
weak_mods is ORed with real_mods when keyboard report is sent. https://github.com/tmk/tmk_core/blob/master/common/action_util.c#L57
Timer Functionality
It's possible to start timers and read values for time-specific events - here's an example:
static uint16_t key_timer;
key_timer = timer_read();
if (timer_elapsed(key_timer) < 100) {
// do something if less than 100ms have passed
} else {
// do something if 100ms or more have passed
}
It's best to declare the static uint16_t key_timer;
at the top of the file, outside of any code blocks you're using it in.