mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-18 18:04:57 +00:00
c592128219
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
1.1 KiB
1.1 KiB
Elrgo S Split Keyboard
This is a fork of the VOID Ergo S with QMK Configurator support.
Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.
Building guide, models for 3D printing
- Keyboard Maintainer: Eloren
- Hardware Supported: Arduino Pro Micro
- Hardware Availability: Open Source
Make example for this keyboard (after setting up your build environment):
make handwired/elrgo_s:default
Flashing example for this keyboard:
make handwired/elrgo_s:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 2 ways:
- Physical reset button: Briefly press the button through the hole on the left side of the case.
- Keycode in layout: Press the key mapped to
RESETif it is available