mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-18 09:55:48 +00:00
1f2b1dedcc
* Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation.
178 lines
9 KiB
Markdown
178 lines
9 KiB
Markdown
# QMK Graphics Format :id=qmk-graphics-format
|
|
|
|
QMK uses a graphics format _("Quantum Graphics Format" - QGF)_ specifically for resource-constrained systems.
|
|
|
|
This format is capable of encoding 1-, 2-, 4-, and 8-bit-per-pixel greyscale- and palette-based images. It also includes RLE for pixel data for some basic compression.
|
|
|
|
All integer values are in little-endian format.
|
|
|
|
The QGF is defined in terms of _blocks_ -- each _block_ contains a _header_ and an optional _blob_ of data. The _header_ contains the block's _typeid_, and the length of the _blob_ that follows. Each block type is denoted by a different _typeid_ has its own block definition below. All blocks are defined as packed structs, containing zero padding between fields.
|
|
|
|
The general structure of the file is:
|
|
|
|
* _Graphics descriptor block_
|
|
* _Frame offset block_
|
|
* Repeating list of frames:
|
|
* _Frame descriptor block_
|
|
* _Frame palette block_ (optional, depending on frame format)
|
|
* _Frame delta block_ (optional, depending on delta flag)
|
|
* _Frame data block_
|
|
|
|
Different frames within the file should be considered "isolated" and may have their own image format and/or palette.
|
|
|
|
## Block Header :id=qgf-block-header
|
|
|
|
This block header is present for all blocks, including the graphics descriptor.
|
|
|
|
_Block header_ format:
|
|
|
|
```c
|
|
typedef struct __attribute__((packed)) qgf_block_header_v1_t {
|
|
uint8_t type_id; // See each respective block type
|
|
uint8_t neg_type_id; // Negated type ID, used for detecting parsing errors
|
|
uint24_t length; // 24-bit blob length, allowing for block sizes of a maximum of 16MB
|
|
} qgf_block_header_v1_t;
|
|
// _Static_assert(sizeof(qgf_block_header_v1_t) == 5, "qgf_block_header_v1_t must be 5 bytes in v1 of QGF");
|
|
```
|
|
The _length_ describes the number of octets in the data following the block header -- a block header may specify a _length_ of `0` if no blob is specified.
|
|
|
|
## Graphics descriptor block :id=qgf-graphics-descriptor
|
|
|
|
* _typeid_ = 0x00
|
|
* _length_ = 18
|
|
|
|
This block must be located at the start of the file contents, and can exist a maximum of once in an entire QGF file. It is always followed by the _frame offset block_.
|
|
|
|
_Block_ format:
|
|
|
|
```c
|
|
typedef struct __attribute__((packed)) qgf_graphics_descriptor_v1_t {
|
|
qgf_block_header_v1_t header; // = { .type_id = 0x00, .neg_type_id = (~0x00), .length = 18 }
|
|
uint24_t magic; // constant, equal to 0x464751 ("QGF")
|
|
uint8_t qgf_version; // constant, equal to 0x01
|
|
uint32_t total_file_size; // total size of the entire file, starting at offset zero
|
|
uint32_t neg_total_file_size; // negated value of total_file_size, used for detecting parsing errors
|
|
uint16_t image_width; // in pixels
|
|
uint16_t image_height; // in pixels
|
|
uint16_t frame_count; // minimum of 1
|
|
} qgf_graphics_descriptor_v1_t;
|
|
// _Static_assert(sizeof(qgf_graphics_descriptor_v1_t) == (sizeof(qgf_block_header_v1_t) + 18), "qgf_graphics_descriptor_v1_t must be 23 bytes in v1 of QGF");
|
|
```
|
|
|
|
## Frame offset block :id=qgf-frame-offset-descriptor
|
|
|
|
* _typeid_ = 0x01
|
|
* _length_ = variable
|
|
|
|
This block denotes the offsets within the file to each frame's _frame descriptor block_, relative to the start of the file. The _frame offset block_ always immediately follows the _graphics descriptor block_. The contents of this block are an array of U32's, with one entry for each frame.
|
|
|
|
Duplicate frame offsets in this block are allowed, if a certain frame is to be shown multiple times during animation.
|
|
|
|
_Block_ format:
|
|
|
|
```c
|
|
typedef struct __attribute__((packed)) qgf_frame_offsets_v1_t {
|
|
qgf_block_header_v1_t header; // = { .type_id = 0x01, .neg_type_id = (~0x01), .length = (N * sizeof(uint32_t)) }
|
|
uint32_t offset[N]; // where 'N' is the number of frames in the file
|
|
} qgf_frame_offsets_v1_t;
|
|
```
|
|
|
|
## Frame descriptor block :id=qgf-frame-descriptor
|
|
|
|
* _typeid_ = 0x02
|
|
* _length_ = 5
|
|
|
|
This block denotes the start of a frame.
|
|
|
|
_Block_ format:
|
|
|
|
```c
|
|
typedef struct __attribute__((packed)) qgf_frame_v1_t {
|
|
qgf_block_header_v1_t header; // = { .type_id = 0x02, .neg_type_id = (~0x02), .length = 5 }
|
|
uint8_t format; // Frame format, see below.
|
|
uint8_t flags; // Frame flags, see below.
|
|
uint8_t compression_scheme; // Compression scheme, see below.
|
|
uint8_t transparency_index; // palette index used for transparent pixels (not yet implemented)
|
|
uint16_t delay; // frame delay time for animations (in units of milliseconds)
|
|
} qgf_frame_v1_t;
|
|
// _Static_assert(sizeof(qgf_frame_v1_t) == (sizeof(qgf_block_header_v1_t) + 6), "qgf_frame_v1_t must be 11 bytes in v1 of QGF");
|
|
```
|
|
|
|
If this frame is grayscale, the _frame descriptor block_ (or _frame delta block_ if flags denote a delta frame) is immediately followed by this frame's corresponding _frame data block_.
|
|
|
|
If the frame uses an indexed palette, the _frame descriptor block_ (or _frame delta block_ if flags denote a delta frame) is immediately followed by this frame's corresponding _frame palette block_.
|
|
|
|
Frame format possible values:
|
|
|
|
* `0x00`: 1bpp grayscale, no palette, `0` = black, `1` = white, LSb first pixel
|
|
* `0x01`: 2bpp grayscale, no palette, `0` = black, `3` = white, linear interpolation of brightness, LSb first pixel
|
|
* `0x02`: 4bpp grayscale, no palette, `0` = black, `15` = white, linear interpolation of brightness, LSb first pixel
|
|
* `0x03`: 8bpp grayscale, no palette, `0` = black, `255` = white, linear interpolation of brightness, LSb first pixel
|
|
* `0x04`: 1bpp indexed palette, 2 colors, LSb first pixel
|
|
* `0x05`: 2bpp indexed palette, 4 colors, LSb first pixel
|
|
* `0x06`: 4bpp indexed palette, 16 colors, LSb first pixel
|
|
* `0x07`: 8bpp indexed palette, 256 colors, LSb first pixel
|
|
|
|
Frame flags is a bitmask with the following format:
|
|
|
|
| `bit 7` | `bit 6` | `bit 5` | `bit 4` | `bit 3` | `bit 2` | `bit 1` | `bit 0` |
|
|
|---------|---------|---------|---------|---------|---------|---------|--------------|
|
|
| - | - | - | - | - | - | Delta | Transparency |
|
|
|
|
* `[1]` -- Delta: Signifies that the current frame is a delta frame, which specifies only a sub-image. The _frame delta block_ follows the _frame palette block_ if the image format specifies a palette, otherwise it directly follows the _frame descriptor block_.
|
|
* `[0]` -- Transparency: The transparent palette index in the _blob_ is considered valid and should be used when considering which pixels should be transparent during rendering this frame, if possible.
|
|
|
|
Compression scheme possible values:
|
|
|
|
* `0x00`: No compression
|
|
* `0x01`: [QMK RLE](quantum_painter_rle.md)
|
|
|
|
## Frame palette block :id=qgf-frame-palette-descriptor
|
|
|
|
* _typeid_ = 0x03
|
|
* _length_ = variable
|
|
|
|
This block describes the palette used for the frame. The _blob_ contains an array of palette entries -- one palette entry is present for each color used -- each palette entry is in QMK HSV888 format:
|
|
|
|
```c
|
|
typedef struct __attribute__((packed)) qgf_palette_v1_t {
|
|
qgf_block_header_v1_t header; // = { .type_id = 0x03, .neg_type_id = (~0x03), .length = (N * 3 * sizeof(uint8_t)) }
|
|
struct { // container for a single HSV palette entry
|
|
uint8_t h; // hue component: `[0,360)` degrees is mapped to `[0,255]` uint8_t.
|
|
uint8_t s; // saturation component: `[0,1]` is mapped to `[0,255]` uint8_t.
|
|
uint8_t v; // value component: `[0,1]` is mapped to `[0,255]` uint8_t.
|
|
} hsv[N]; // N * hsv, where N is the number of palette entries depending on the frame format in the descriptor
|
|
} qgf_palette_v1_t;
|
|
```
|
|
|
|
## Frame delta block :id=qgf-frame-delta-descriptor
|
|
|
|
* _typeid_ = 0x04
|
|
* _length_ = 8
|
|
|
|
This block describes where the delta frame should be drawn, with respect to the top left location of the image.
|
|
|
|
```c
|
|
typedef struct __attribute__((packed)) qgf_delta_v1_t {
|
|
qgf_block_header_v1_t header; // = { .type_id = 0x04, .neg_type_id = (~0x04), .length = 8 }
|
|
uint16_t left; // The left pixel location to draw the delta image
|
|
uint16_t top; // The top pixel location to draw the delta image
|
|
uint16_t right; // The right pixel location to to draw the delta image
|
|
uint16_t bottom; // The bottom pixel location to to draw the delta image
|
|
} qgf_delta_v1_t;
|
|
// _Static_assert(sizeof(qgf_delta_v1_t) == 13, "qgf_delta_v1_t must be 13 bytes in v1 of QGF");
|
|
```
|
|
|
|
## Frame data block :id=qgf-frame-data-descriptor
|
|
|
|
* _typeid_ = 0x05
|
|
* _length_ = variable
|
|
|
|
This block describes the data associated with the frame. The _blob_ contains an array of bytes containing the data corresponding to the frame's image format:
|
|
|
|
```c
|
|
typedef struct __attribute__((packed)) qgf_data_v1_t {
|
|
qgf_block_header_v1_t header; // = { .type_id = 0x05, .neg_type_id = (~0x05), .length = N }
|
|
uint8_t data[N]; // N data octets
|
|
} qgf_data_v1_t;
|
|
```
|