mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-15 08:25:01 +00:00
27 lines
1.4 KiB
Markdown
27 lines
1.4 KiB
Markdown
# LATE-9
|
|
|
|
|
|
The LATE-9 is a multi-tap input keyboard based on mobile phones from the late '90s. LATE-9 is intended as a dev board with 18 buttons and an OLED screen, made by through-hole components only. With this, you can experiment QMK OLED capabilities with very little expense.
|
|
|
|
|
|
|
|
See the project repository for gerbers.
|
|
|
|
* Keyboard maintainer: [rookiebwoy](https://github.com/rookiebwoy)
|
|
* Hardware supported: ProMicro, _Elite-C (not tested)_
|
|
* Project repository: [LATE-9 on github](https://github.com/rookiebwoy/late-9)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make late9/rev1:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make late9/rev1:default:flash
|
|
|
|
|
|
When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as `RST` (one is the `RESET` and the other one is `GROUND`) to enter the bootloader and let the OS detects the device.
|
|
After installing this firmware you can use Bootmagic to enter the bootloader while plugging in your LATE-9. By default it's the button on the upper-left of the keyboard.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|