mirrors/qmk_firmware
1
0
Fork 1
mirror of https://github.com/qmk/qmk_firmware synced 2024-11-16 00:45:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/splitography/readme.md

1.9 KiB
Raw Blame History

Splitography

Splitography

A pay what you will compact keyboard intended for use with Plover, free and open source stenography software. This is a low-cost keyboard with minimal packaging and design, and arrives fully assembled, ready to use.

Make example for this keyboard (after setting up your build environment):

make splitography:default

Flashing example for this keyboard:

make splitography:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard.
  • Physical reset button: Briefly press the button on the back of the PCB.
  • Keycode in layout: Press the key mapped to RESET if it is available.

Guide

Splitography quick start video

A short video guide on how to set up the SOFT/HRUF Splitography, a mechanical keyboard intended for use with Plover.

Here is a reference card for the standard keyboard layout:

Reference card

  • While holding down a colored thumb key, the matching colored functions/characters on the remaining keys can be pressed.
  • Bottom edge keys are accessed by holding down both keys.
  • Numlock locks in the Numpad layer.
  • Alt and Shift pressed simultaneously to return to the standard layout.