qmk_firmware/keyboards/a_dux/readme.md
Albert Y 5d7efc7183
[Keyboard] Add bootmagic lite keys to both halve of A.dux (#14731)
Co-authored-by: filterpaper <filterpaper@localhost>
2021-10-10 20:46:45 -07:00

38 lines
2 KiB
Markdown

# Architeuthis Dux
![Architeuthis Dux](https://raw.githubusercontent.com/tapioki/cephalopoda/main/Images/architeuthis_dux.png)
AKA A. dux, A.D., "Giant squid"
34 keys, same stagger as [D. gigas](https://github.com/tapioki/cephalopoda/tree/main/Dosidicus%20gigas), but with two thumb keys included. Pinky, ring, index, and inner columns splayed at 15, 5, 0, -5, -5 degrees. SplitKB Tenting Puck support. All PCB files are available on the [project's github page](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux)
Thank you [Perce](https://madebyperce.com/) for the logo.
## Cases can be found here:
* [Flat Case](https://github.com/madebyperce/aduxcase)
* [Tented Case](https://github.com/jdart/adux-tent)
* [Case with Plates](https://github.com/sadekbaroudi/cephalopoda/tree/main/Architeuthis%20dux/case)
## Keyboard Info
* Keyboard Maintainer: [tapioki](https://github.com/tapioki)
* Hardware Supported: Architeuthis Dux
* Hardware Availability: [GitHub](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux)
Make examples for this keyboard (after setting up your build environment):
make a_dux:default
make a_dux:default:avrdude-split-left
make a_dux:default:avrdude-split-right
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. (With `EE_HANDS` configured, hold down the top right key on the right half to place the right controller in bootloader mode)
* **Physical reset**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).