mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-15 16:35:15 +00:00
1.2 KiB
1.2 KiB
qwertyqop hotswap 60% PCB
A generic hotswap 60% PCB with cutouts akin to h60 and 2 positions for JST port.
- Keyboard Maintainer: Zeix
- Hardware Supported: Qwertyqop QQ60 Hotswap PCB Rev1
- Hardware Availability: https://qwertyqop.com/products/60-pcb-1
Make example for this keyboard (after setting up your build environment):
make zeix/qwertyqop60hs:default
Flashing example for this keyboard:
make zeix/qwertyqop60hs:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Press the 'USB_BOOT' button and plug in keyboard or briefly short the
RESETandGNDpads on the SWD header twice - Keycode in layout: Press the key mapped to
QK_BOOTif it is available