mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-18 01:46:09 +00:00
77f66cc5e1
* [Keyboard] add Just60 keyboard
* [Keyboard] just60: fixes per suggestions
* Update keyboards/just60/rules.mk
* Update keyboards/just60/readme.md
* Update keyboards/just60/rules.mk
* [Keyboard] just60: add keymap specific bootloader
* Revert "[Keyboard] just60: add keymap specific bootloader"
This reverts commit 0357e0a6f4.
17 lines
1.1 KiB
Markdown
17 lines
1.1 KiB
Markdown
# Just60
|
|
|
|
Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.
|
|
|
|
To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
|
|
|
|
Backlight LEDs and Bluetooth are not working yet.
|
|
|
|
* Keyboard Maintainer: [Jianfei Wang](https://github.com/thinxer)
|
|
* Hardware Supported: Just60 (atmega32u4)
|
|
* Hardware Availability: https://item.taobao.com/item.htm?id=564176654249
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make just60:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|