* New keyboard added
Zen is a split ortholinear currently in group buy.
* remove bad keymap
Keymap was throwing errors
* remove other bad keymap
I should have checked these before haha
* small fix to update folder name
* renamed temp
* renamed to zen
* update folder name
* Slim down matrix code
Suggested by drashna
* move KC_NO
* Update keymap
* change from rev2 to rev1
* Planck-swapped up/down arrows,s65x-add dvorak
* Added Dvorak as first layer of default keymap
* planck-swap up and down arrows. s65x-added dvorak
* added colemak to kelorean s65x keymap
* made more changes to kelorean keymap
* just tryinng to fix bc i was not connected upstrem
* Planck-swapped up/down arrows,s65x-add dvorak
* Added Dvorak as first layer of default keymap
* planck-swap up and down arrows. s65x-added dvorak
* added colemak to kelorean s65x keymap
* Change tapping term to be longer
* Make Audio/Underglow settings permanent
* Use wait_ms rather than _delay_ms
* Readd One Shot Mods
* Switch to Imperial March startup sound
* Move OSM to it's own layer
* Minor Formatting Tweaks
* Keymap Templates and formatting fixes
* added jirgn keymap from dotfiles
* added jirgn s keymap as copy from default
* [TASK] removed unnecessary colemak and dvorak layouts
* [TASK] added right shift with tab to enter
* [TASK] added ctrl keys beside homerow
* [TASK] added Navigation Layer
removed unnecessary BACKLIT
removed Media Controls in Base Layers
* [TASK] added left Navigation mode fixed some doc
* [Fix] locked navigation layer by adding a transparent key for nav_mod
keys
* [TASK] added some more symbols and removed lower F1-F12 keys
* [TASK] added some README and a layout design
* [FIX] forced for adding to repo
* [FIX] forced for adding to repo
* [FIX] problem with layerswitching and hanging ctrl
* removed image from repo
* removed github image link with permalink from layout designer
* removed github image link with permalink from layout designer
* replaced image with permalink to layout editor
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* CU24 Support
Addes Support for the upcoming CU24 keyboard sold by CapsUnlocked
* Removed modular keyboards to make stuff clear
* Lower Case folders
* Remove CU24 - Rename Folder
* Add CU24 - Renamed
* Fixed ignore list
I am stupid
* Create keymap.c
Add Hag keymap, a heavily modified dvorak swedish keymap with multiple layouts and often used stuff under the alpha cluster.
* Create config.h
* Create rules.mk
* Add NIU Mini keymap from Planck keymap
* Remove old keymap files
* Fix README, removed Planck references
* Add default layout, move Planck layout to separate folder
* Update README
* Add my XD60 keymap
* Change RShift to slash
* Fix keymap: stuck on MO(1)
* Move RESET to Fn+Enter
* Add: RGB saturation cycle
* Add numpad layer to keymap
* Fix last case
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.
* Change default to KEYMAP_MIT, not KEYMAP_OFFSET
* Add custom RGB code for JJ40
* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.
* RGB working on JJ40.
* Fix: saturation increase/decrease flipped
* Add new directory for my custom keymap with RGB keycodes
* Swap LAlt and LGUI
* Update JJ40 max power draw with measured value
* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.
* Super rudimentary backlight test, init RGB LEDs on boot
* Backlighting works - stays on for now
* Toggling working
* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c
* Timers not working
* Delete global.h
* Cleanup
* Compiles
* Good sign: LEDs stop working again
* Handle timer1 overflow
* Progress: fix: forgot to init
* Backlighting fully working now except breathing.
* Revert keymap to original keycodes
* Update XD60 keymap README
* Update JJ40 keymap with backlight toggles
* Breathing working just fine.
* Update references
* Add backlight_set() call
* Cleanup code to disable backlight
* Fix: does not compile
* Fix: missing call to rgblight_task.
* Testing with BACKLIGHT_BREATHING
* Cleanup
* Cleanup comments
* More commenting cleanup.
* Do not enable BACKLIGHT_BREATHING by default
* Update XD60 keymap
* Update: move matrix_scan_kb out from matrix.c to jj40.c (kb-level)
* Cleanup for PR
* Fix conflict in readme.md for NIU mini
* Restore original power consumption figure
* Fix: matrix_scan_user() now has to be defined in the keymaps
* Add weak `matrix_scan_user` so it does not have to be defined in keymap
* Add weak matrix_init_user()
* Adding personal BEAKL9 based keymap
Initial commit, very much a WIP/Proof of concept.
* Updating personal BEAKL9 based layout
* F-keys added to upper layer
* planck with a not-quite-neo layout for a de-DE OS/SW keymap
* ergodox infinity with a not-quite-neo layout for a de-DE OS/SW keymap
* add documentation
* Add xd75 layout
* Add Readme
* Update layout
* Remove Backlight keys
* Move ENTER / BACKSP / DEL
* Commit my bepo layout instead of the qwerty version since i will not use it
* Use 0 instead of 00
* Fix TODO key
* Update the readme
* Replace wrong key placment
* Update center column
* Update the layout with 2-u key
* Adjust the fn layer
* Adjust the main layer
* Adjust the fn layer
If BACKLIGHT_ENABLE is set to `yes` in `rules.mk`, then the user
can use the `BL_*` keycodes to adjust the backlight. At the moment,
only on/off is supported.
* started work on halfkeyboard
* update to keymap
* halfkey layouts complete for dvorak and qwerty
* added plover layout to halfkeyboard mapping
* fixed error in dvorak layout right hand
* fixed error in dvorak layout right hand, comments updated
* thing
* added minus and equals to normal layouts
* added minus and equals to normal layouts
* adde visualizer matching halfkeyboard mappings
* adde visualizer matching halfkeyboard mappings
* updated keymaps for mirror handedness functionality for all layers. Also added visualizer code for distinct color for each layer, and LCD text displaying the current layer.
* had a KC_TILD where should have had KC_GRAV
* its spelled KC_GRAVE
* added ATOM47 (Vortex Core QMK powered PCB)
* fixed broken\unfinished comment block
* moved Layer template to default template.
* moved Layer template to default template and removed template from the keymap.c file.
* Added LEdiodes config
* created readme.md
contains an image of 60% board(LEdiodes).
* updated readme.md with images
added images of the PCB and some feature details from https://geekhack.org/index.php?topic=93447.msg2545221#msg2545221
* removed excess words.
* followed the readme template to a T.
* formatting fix : added a return.
* ymdk_np21 initial support
Base support of ymdk_np21 - based on jj40. Full grid layout
* Update README.md
Replacing description.
* Adding YMDK NP21 to comunity list.
Adding YMDK NP21 to community supported list.
* ISO HHKB first commit
* First version of my HHKB ISO Spanish Keymap
* Readme.md
* Added more media keys.
Caps Lock added on function layer.
Backlight toggle added on funtion layer.
* RGB support for WS2812B RGB led strip
* RGB and brightness control.
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.
* Change default to KEYMAP_MIT, not KEYMAP_OFFSET
* Add custom RGB code for JJ40
* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.
* RGB working on JJ40.
* Fix: saturation increase/decrease flipped
* Add new directory for my custom keymap with RGB keycodes
* Swap LAlt and LGUI
* Update JJ40 max power draw with measured value
* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.
* Super rudimentary backlight test, init RGB LEDs on boot
* Backlighting works - stays on for now
* Toggling working
* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c
* Timers not working
* Delete global.h
* Cleanup
* Compiles
* Good sign: LEDs stop working again
* Handle timer1 overflow
* Progress: fix: forgot to init
* Backlighting fully working now except breathing.
* Revert keymap to original keycodes
* Update XD60 keymap README
* Update JJ40 keymap with backlight toggles
* Breathing working just fine.
* Update references
* Add backlight_set() call
* Cleanup code to disable backlight
* Fix: does not compile
* Fix: missing call to rgblight_task.
* Testing with BACKLIGHT_BREATHING
* Cleanup
* Cleanup comments
* More commenting cleanup.
* Do not enable BACKLIGHT_BREATHING by default
* Move faux clicky into userspace
* Get Audio and RGB enabled on Orthodox-rev1
* Add faux click to userspace
* Add Orthodox Rev3 check to macros
* Hack Orthodox Name for drashna keymap
* No more One Shots
* Ergodox product name hack
* Enable Audio on Orthodox by default
* Get audio working on clueboard/60
* add keys for music mode
* Change doubles to floats
* add keys for all the songs
* revert to the default startup sound
* Remove music mode until we can figure out why it crashes
* gordon.c defines many aliases for KC codes.
* gordon.c defines many advanced tap dance functions.
* This is a squashed commit of about 6 months of work on chimera and
ergodox infinity changes.
* Ignore the change-id below.
Change-Id: I83927139e8a80fe08992ae91ec7d62571498f7f7
* Default layout with RGB and in-switch LED controls
This is a variation of the default keymap with added RGB underglow and in-switch LED controls.
* Readme for default_rgb keymap
* ISO keymap with RGB and in-switch LED controls
This is a variation of the default ISO keymap with added RGB Underglow and in-switch LED controls.
* readme for iso_rgb keymap
* Updated ACR60, Mechmini, ALU84 readme information and config.h descripters
Update MECHKEYS keyboards to be uniform in readmes and config.h's PID, MANUFACTORER, and DESCRIPTIONS. This allows the keyboards to be more uniform amongst the different types.
* Rename keyboards/alu84/keymaps/TurboMech/config.h to keyboards/alu84/keymaps/turbomech
* Rename keyboards/alu84/keymaps/turbomech to keyboards/alu84/keymaps/TurboMech/config.h
* Fixed folder naming for alu84/keymaps/turbomech
* fixed error from compile
removed double `return MACRO_NONE;` and `switch (id) {`
* Added initial in-switch LED support for the Eagle/Viper V2.
Currently only has four modes: All ON, Mods/Nums ON, Alphas ON, or All OFF
* Revert keymap changes
* Changed switch curly bracket to match style.
* info.json committed to support the qmk configurator project
These are info.json for each of the keyboards I've contributed to
during my time here at QMK
* change LAYOUT to KEYMAP to adhere to matrix definitions
* Preliminary support for Duck Eagle/Viper V2 60% board. This is a copy of the octagon/v2 with things changed to reach a compiling state
* Get a 60% keymap compiling, this might not be what the eagle/viper
really supports
* Update readme to point to correct GeekHack link
* Get keymap working on a Duck Eagle
* Add code submitted by profanum429
- Add HHKB style top row to v2.h
- Modify read_rows function to take into accout the caps lock firmware key
- Modify default keymap to match the new v2.h
- Adjust readmes
* Fix bug related to col 0 not working
* Add keymap for mechmerlin
* Add profanum429's viper hhkb layout
* Add visual representation for mechmerlin layout
Add navigation keys to keymap
* Add a better visual representation to the mechmerlin keymap
* Add profanum429's Viper layout!
* Updated profanum429 keymap to match a full HHKB
Enabled media keys in rules.mk
* Revert "Updated profanum429 keymap to match a full HHKB"
This reverts commit ed914160d7.
* Fix default keymap for Eagle
* Enable extra keys for audio control support
* Modified timings in indicator_leds to accomodate the WS2811S chips on the Eagle/Viper2 PCBs at 800kHz with a 16mHz clock
Modified the backlight settings to not interfere with the default RGB underglow code from QMK
Modified the order of the LEDs in the LED status bar at the top of the Eagle/Viper2 PCBs (3,2,1,6,5,4,8,7 order)
* Cleaned up indicator code to remove unused functions as the RGB underglow uses the
default driver provided by QMK
Commented out backlighting code in v2.c
* update readmes to reflect profanum's awesome contributions and fix typo in make instructions
* Remove custom RGB logic and just rely on QMK RGB underglow. We'll leave the backlighting in place for now
This creates a v1 and v2 subproject. V1 retains all the same implementations of the bootmapper-ported Mechmnini 1 including #2196. V2 adds the Mechmini 2.0 kayboard support (I know it took me way to long to get it a pull request in).
All readme's updated to reflect compiling the two seperate keyboards. Simply either `make mechmini/v1:default` or `make mechmini/v2:defualt`. Utilizing the rules.mk using `make mechmini:default` will automatically create the Mechmini 2 default keymap as this is the current version and has a much wider user base.
* Added V60 Type R Polestar Backlight and RGB Underglow support
* made RGB Underglow stuff optional, to support the non Polestar V60
* updated readme and rules
* fixed typo in readme
* add breathing to bananasplit
* backlight breathing overhaul
* fix the backlight_tick thing.
* fix for vision_division backlight
* fix a few keymaps and probably break breathing for some weirdly set-up boards.
* remove BL_x keycodes because they made unreasonable assumptions
* some fixes for BL keycodes
* integer cie lightness scaling
* use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.
* Change default to KEYMAP_MIT, not KEYMAP_OFFSET
* Add custom RGB code for JJ40
* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.
* RGB working on JJ40.
* Fix: saturation increase/decrease flipped
* Add new directory for my custom keymap with RGB keycodes
* Swap LAlt and LGUI
* Update JJ40 max power draw with measured value
* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
* Minor tweaks
modified: users/drashna/drashna.c
* Fix Workman ASCII art
* Add OSM for shifts
* Make Viterbi's 00 code consistant
* Minor Cleanup off Userspace
* Change Tapping Term on Ergodox
* Re-add EEPROM code
* Minor updates and tweaks
* Use QMK_H variables to make keymaps more universal
* Forgot 'break;' for covecube layer
* Tweak Viterbi files now that I have hands on
* Add secrets to Ergodox
* RGB tweaks to Viterbi
* Viterbi RGB layout tweeks
* Minor tweaks
* Add One Shot Mod tap toggle
* Add Faux Clicky to Viterbi, and disable controller's LEDs
* Minor tweaks
* Move D3 keycode defines into userspace
* Updated Userspace Readme
* iso_de_mac
ISO-DE layout with mac media controls
* Delete keymap.c
* iso_de_mac
ISO-DE support with Mac media keys
* Add files via upload
Layout overview
* iso layout support
Adds support for the extra key of ISO
* Update keymap.c
typo-fix
* fixed mac next key
* Delete Layout.png
* Delete keymap.c
* Added ALU84
Added ALU84 from mechkeys.ca. TurboMech keymap is MacOS oriented, need to still update the defualt keymap.
* added alu84 and TurboMech userspace
* updated keymap, config.h and rules.mk for alu84
* Preliminary commit for Octagon V1 support
This is essentially a cp -R v2 v1 with a few things changed to
get it to compile and build.
* The Octagon V1 supports up to 84 keys as opposed to the V2 which
supports up to 86. This commit changes the keymap to match it.
* Temporary default keymap just to get things to compile
* Update readme file
* Fix switch matrix
* Fix underglow lighting option
* Fix keymap to take care of shifted columns
* Fix keymap formatting
* Remove un-needed files left over from rasmusx
* Make Octagon V1 have its own keymap directory with default keymap
* Make Octagon V2 have its own keymap directory with default keymap
* Cleanups and readme edits
* adding new layout for the planck that helps when coming from the pok3r
* Fixing the function layer
* Update readme.md
* Update keymap.c
Making some small adjustments
* Update keymap.c
switching GUI and Esc
* Update keymap.c
* adding mod tap on left and right shift
* adding mod tap on left and right shift
* poker keymap for lets split
* fixing the FN layer
* removing unused file
* rename octagon_v2 directory to octagon directory
* Move octagon_v2 files to v2 sub-directory
* Edit readme files
* setup header files for building multiple versions of the Duck
Octagon.
* Changes as per Jack's PR 2170 comments
* Add keymap for my friend's KBD75\nBug : RGUI is read as RALT
* Add keymap for Nyquist
* Add Keymap for Whitefox (Truefox layout only)
* Add Keymap for XD75 and XD73 (XD75 with 1u blocker each on left and right bottom
* Added functions to read HSV values
I have added three functions to rgb_light.c to be able to read the hue, saturation and value from other places.
They are rgblight_get_hue(), rgblight_get_sat(), adn rgblight_get_val().
* Create keymap.c
* Add COSPAD support to QMK
I have ported the COSPAD numpad to qmk.
* Update readme.md
* Update cospad.c
* Line ending stuff again
* Added initial files for Christmas Tree PCB
* Updated Readme and info json's, also config.
* Cleaned up keymap file, added proper comments for keymap. Removed readme leftover from original copy of planck folder structure.
* Forgot to push rules.mk for the V2017 folder, fixed now.
* Initial commit for Octagon V2 Support
This is still basically just a copy of lightsaver support with
names changed.
* Port xauser keymap from: https://github.com/xauser/tmk_keyboard/blob/xauser/keyboard/octagon_v2/keymap_common.h
* Temporary default keymap just to get things compiling
* Modify config.h to have the right keyboard info
* Partial port of xauser matrix code for octagon v2
* Fix readme.md
1. Fix link to geekhack GB
2. Add microchips
3. Add appropriate attributions
* Fix PORTD
* Intermediate fix to get LEDs working
* Update BACKLIGHT_AREAS enum
* Port the following:
backlight_set
backlight_toggle_rgb
backlight_set_rgb
and resolve dependencies in header files
* Port backlight_update_state to led_set_kb
* Change copyright notice author to MechMerlin
* Remove Rasmus keymap
* Get a default keymap that actually does something and let's you reset.
* Convert keymap into KC_XXXX format.
* Better formatting of the default keymap to make it more readable
* Fix keymap
* Get that Fn key working!
* Some code cleanup and small refactor
* Fix keymap in octagon_v2.h
* Line ending stuff again
* Added initial files for Christmas Tree PCB
* Updated Readme and info json's, also config.
* Cleaned up keymap file, added proper comments for keymap. Removed readme leftover from original copy of planck folder structure.
* Initial K-Type support
* Copy PJRC_TEENSY_3_1 to work around watchdog issues
* K-Type: Remove bootloader offset in rules.mk
* Ensure matrix and scan quantum functions are called when needed
This is porting a fix from f5422a70b6
* Added xd60:Jos keymap
* Corrected Layout image for xd60:Jos layout
* Update README for xd60:Jos layout
* Created rules.mk for xd60:Jos layout
* Fixed an edge case for xd60:Jos layout
* Now using a specific for xd60:Jos layout instead of modifying the main one
* Better physical layout image for xd60:Jos layout
* new planck keymap, new feature - hybrid shift/enter action key (great for small keyboards!)
* corrected documentation to specify rules.mk file instead of Makefile
* Initial version of the Ergodox EZ Bépo keymap, TypeMatrix style.
* Update the readme file and add some handling of the keyboard LEDs.
* Toggling layer requires 2 taps.
* Remove a constant as it conflicts with an earier definition.
* Fix a typo in a type name.
* Fix the arrow layer that had a bad number.
* Second main version of my bepo keymap, after the tests of the first one.
* Fix the triggering of the function layer and the handling of the LED.
* Reduce the shining of the LEDs.
* Fix the swap layer (that required a keypress on the other side of the keyboard to be deactivated).
* Duplicate some of the mouse button for easy access.
* Move some of the secondary functions out of the center keys.
* Slightly slow down the mouse and mouse wheel.
* Update the comment and readme.md for the V2 of the keymap.
* Invert button 2 and 3 of the mouse. Really fix the SWAP layer.
* Test with the right alt modifier added as secondary function (on hold) of the space keys. The right alt key becomes a left alt one.
* Add specific shift/ctrl for the FN layer; move some mouse keys around to help with that.
* Remove one FN modifier-on-hold key that was not useful.
* Duplicate the FN layer inside the MOUSE layer.
* Add support (not tested yet) for macro recording and play on a single key as a tap dance.
* Allow to stop recording the macro by tapping once on the macro key (still un-tested).
* Add support for macro recording using some tap dance.
* shorten a comment.
* Reinstate the FN toggle on the percent key (so that there is an FN toggle on the right-hand-side).
* Fix some comments and update the link to the most up-to-date image.
* Small fix to the keymap images.
* Change overwatch to Gamepad
* Remove secrets file
* Add sample sensitive.h file
* Borrow @colinta's secrets.h include method
* Remove unnessary placeholder for macros
* Set secrets to use PROGMEM for char string
* Add readme files to my keymaps and userspace
* ignore libs
* Clang complete file
* Add VIM_A, VIM_S, VIM_COMMAND_SHIFT_D, and VIM_COMMAND_SHIFT_A
Add VIM_A, VIM_S, VIM_COMMAND_SHIFT_D, and VIM_COMMAND_SHIFT_A
a s O
* Comment blocks for minimap
generated at
http://patorjk.com/software/taag/#p=display&h=0&v=0&c=c&f=Banner&t=COMMENT
* Be explicit
* More Comment blocks
* Add J
* add A, C, D, J, S, O
* Make h j k l explicitly vim commands (useful for JOIN)
* add cb ce cw ch cj ck cl db de dw dh dj dk dl vb ve vh vj vk vl x ciw diw viw
* debug messages for ci di vi
* Var capitalized
* Save bytes by disabling mouse keys
* Add Y P
* Be more explicit about which key was pressed
* Be more explicit about which key was sent
* Move project to new directory structure
* Remove non-vim layout folder
* Replace KC_TRNS with KC_NO on normal layer
* Insert Mode as default
* Try to prevent crashes
* Put normal mode back
* Revert "ignore libs"
This reverts commit 4c5d7592d6.
* add rules.mk
* Add mouse bindings
* Checkout most recent keymap following rebase
* Realign mouse button keys
* Make a macro for TO(NORMAL_MODE)
* add i2c lib submodule
* add actuation point adjustment to fc980c
* add actuation point adjustment to fc660c also.
* use https for i2c submodule
* move to existing i2c lib
* properly remove old submodule
* oops, forgot some files for the fc660c
* Line ending stuff again
* Added initital files and layout for the PCB Ruler keyboard/macro pad thing
* Updated Readme
* Changed make command to new format
"unselecting" left-hand rows is a wasted i2c transaction.
On the left-hand side, the ergodox uses a GPIO expander. It
does *not* change "direction" (input/output) of pins, it just
sets pins high or low.
But all the pins are written at once. There's no way to
change just one pin's value; you send a full byte of all eight
row pins. (Not all of them are in use, but that doesn't matter.)
So every pin is either +V or ground. This is in contrast
with the right-hand side, which is using input mode to make pins
be neutral.
So there's no need to "deselect" the rows on the left side
at all. To select row 0, you set the GPIO register for the
rows to 0xFE. The previous code would then set it back to
0xFF, then set it to 0xFD on the next cycle. But we can just
omit the intervening step, and set it to 0xFD next cycle,
and get the same results.
And yes, I tested that the keyboard still works.
On my system, scan rate as reported by DEBUG_SCAN_RATE goes
from 445 or so to 579 or so, thus, from ~2.24ms to ~1.73ms.
Signed-off-by: seebs <seebs@seebs.net>
* pull fuse settings for bootloader jump
* fix 32a chips
* make automatic bootloader selection optional
* quantify bootloaders
* fixs #164, speeds up dfu reset
* fix for chips w/o usb
* missing an n
* fix bootloader sizes, use words for addresses
* fix bmini, pearl, and [[ issue, make things quiet
* ignore avr errors on arm for now
* update settings for the light
* document bootloader stuff
* add bootloader title
* Copy the ergodox_ez code to handwired/dactyl
Differences from the Ergodox:
* Use QMK_SUBPROJECT_H instead of QMK_KEYBOARD_H, since it's under
handwired
* Omitted several keymaps. They'll eventually be broken (since the
Dactyl has fewer keys), and I don't want to try to fix them.
* Omitted the keymap images for the default layout, since they depict
a different keyboard.
* Everything that said Ergodox now says Dactyl, naturally.
* [whitespace] Delete trailing whitespace
My editor does this automatically so it's just gonna keep cropping up...
* Cut the dactyl down to the right number of columns
(Remember, throughout matrix.c, everything called "row" is really a
column, and vice-versa).
* Remove LED-related code
* Tighten up the Dactyl's build options
* Whitespace cleanup in twimaster.c
* Hardtabs -> spaces
* No more trailing whitespace
* Typo fix
* Correct the CPU frequency units
The Teensy's CPU definitely doesn't run at 16 petahertz...
* Restore access to ONEHAND_ENABLE
I turned it off in 26d47cb42622d990a7c3335e7fcc151aa3edfbf0 while
desperately debugging; I just wanted to ensure it wasn't causing the
problem I was seeing. It was not, in fact, causing the problem, so it's
back.
Also fixed the swap matrix in dactyl.c, since it still referred to
columns that exist in the Ergodox but not the Dactyl.
* Clearer phrasing about TWI's effect on scan rate
* Fix up the Dactyl's firmware-loading instructions
Sadly, the Dactyl has no hole for the onboard reset button.
* Dvorak keymap for the Dactyl
* The Erincalling Layout
* Erincalling layout: Add a := key
I've been working in Go, which uses := a lot, and it's awkward to type
in this layout.
* Dactyl README: link to the dactyl-keyboard repo
* Add a missing copyright line
I don't know how much this matters? Honestly, it's enough for me that my
name is on the git commit. But hey, let's be consistent until there's a
specific reason not to be, right?
* Dactyl: remove commented-out code
I hate it I hate it I hate it
There's not even any information about what it was trying to do!!!! >:(
* Add a note about the row/column ridiculousness
* [whitespace] realign some constants
* Don't claim B4 is tied to VCC
It doesn't matter at all? I honestly don't know what the reason ever
was. It looks like it dates back to the original ErgoDox and I've never
seen one sentence about the purpose.
I've been skipping that wire for some time, and I promise it works fine.
* Dactyl keymaps: Send RALT for right-hand alt key
Not terribly important but I just like things tidy OK
* typo fix
* Refer to "dactyl.h" explicitly
QMK_SUBPROJECT_H has been working locally, but fails in CI. Strange!
* Dactyl: Don't use QMK_SUBPROJECT_H at all
It's still breaking in CI, even though it was a never a problem locally.
* linux shake-around
* move terminal and browser spawning keys
* add a shift to window resizing keys to free combo up for window management
* "jump to tab" shortcuts for firefox
* change window resize modifiers
* change wm keys
* change wm keys again, and reformat keymap to 80chars
* typos
* language key
* qwerty layer for SO, general cleanup
* adds my xd75 layout
* add secret strings to 'secrets.h' behind compile flag, assign defaults
* macro keys now have defaults (hidden in colinta.h) before any recording, and after clearing the dynamic macros.
* fixed whitespace - using 4 spaces instead of 2
With these changes, the ergodox ez goes from 315 scans per second
when no keys are pressed (~3.17ms/scan) to 447 (~2.24ms/scan).
The changes to the pin read are just condensing the logic, and
replacing a lot of conditional operations with a single bitwise
inversion.
The change to row scanning is more significant, and merits
explanation. In general, you can only scan one row of a keyboard
at a time, because if you scan two rows, you no longer know
which row is pulling a given column down. But in the Ergodox
design, this isn't the case; the left hand is controlled by an
I2C-based GPIO expander, and the columns and rows are *completely
separate* electrically from the columns and rows on the right-hand
side.
So simply reading rows in parallel offers two significant
improvements. One is that we no longer need the 30us delay after
each right-hand row, because we're spending more than 30us
communicating with the left hand over i2c. Another is that we're
no longer wastefully sending i2c messages to the left hand
to unselect rows when no rows had actually been selected in the
first place. These delays were, between them, coming out to
nearly 30% of the time spent in each scan.
Signed-off-by: seebs <seebs@seebs.net>
This is particularly relevant for, e.g., the ergodox EZ and
other keyboards with slow scan rates. Without changing the API or
behavior of individual process_record() calls, we allow a
configuration flag to make multiple calls in a single scan.
This will probably have miniscule effects on non-steno users,
and it's not enabled by default for any keyboards. Added note
about it to ergodox README.
Signed-off-by: seebs <seebs@seebs.net>
* move underglow led count from parent to child
* Added pearl support
* Added personal keymap for pearl
* start splitting up ps2avrGB boards
* clean up ps2avrgb boards
* Move keycodes to their own section
* Clarify `KC_PWR` vs `KC_POWER`. Fixes#1994.
* Cleaned uppersonal userspace and keymaps (#1998)
* Cleanup of keymaps
* Remove Tap Dance from Orthodox keymap
* Cleaned up userspace and keymaps
* Added sample (template)userspace files to my folder
* Document the Teensy hardware reset problem
* add mfluid keymap to atreus62
* Update hand_wire.md
Change "Resin" to "Rosin"
* Add keyboard: mt40 (#2001)
* add keyboard: chinese planck clone
* rename chinese_planck to mt40
* add image for the mt40 board
* lets_split: Fix matrix_init for ROW2COL
Signed-off-by: Marian Rusu <rusumarian91@gmail.com>
* Add Keymap for Whitefox Truefox layout
* Add keyboard: ACR60 (#1999)
* base acr60 keyboard folder created
* mitch acr60 keymap updates, documentation
* latest keymap updates
* slight modifications to layer switching
* Changes to Atreus and Ergodox EZ Dvorak 42key layout (#1997)
* importing 42 key dvorak layout
* added comment for build instructions
* adding atreus dvorak 42 key layout
* added readme
* add readme
* build instructions
* additional MEH shortcuts
* added shifted symbols on symbols layer
* working extra symbols on COMBINED layer
* bring atreus layout inline with the ergodox one
* add necessary macros
* working ls macro
* added more shell macros
* added screen rename / screen number macros
* add ctrl-a key in shell-nav to use screen more easily
* added shell screen layer
* assign screen switching macros to screen layer
* define all screen switching macros
* more screen-related shortcuts added on shell screen layer
* change shell nav bottom right row to match base layer (backspace / delete)
* remove some mappings on SHELL_NAV layer as they are now in the screen layer
* added more screen macros
* changes to COMBINED layer (pipe on the right) and modified shell nav
* moved pipe/backslash to then right
* documented SHELL_SCREEN layer
* put backspace/delete on SHELL_NAV layer
* add an explicit lisence file for github to pickup
* Updated keymaps to allow base layer alternation for QWERTY, Colemak & Dvorak (#1962)
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* New Frosty Flake layout for QFR TKL
Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.
* README fix & keymap update for 3 keyboards
Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.
Added TAPPING_TERM = 150 to config.h for all keyboards
Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.
* Update readme for QFR_JM to include make instructions
* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"
This reverts commit a45f264ada, reversing
changes made to 62349c3341.
* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""
This reverts commit eae54fb3be.
* Added QWERTY support to the QFR_JM
Implemented variable default base layer from the Planck default keymap.
* Update README to reflect QWERTY support
* Nyquist:DivergeJM - Update RESET location
Add a reset button to both hands, accessible when halves are disconnected.
* Typo fix
* Update DivergeJM
Switched master to Left hand,
Moved Reset key to a different location
* Added macros to send R pointer & dplyr pipe
Macros added as a string of keypresses, couldn't figure out how to get SEND_STRING to work.
* Added ADJUST -> QWERTY, DVORAK, COLEMAK
Re-implemented update_tri_layer fuctionality to reset base layer for Terminus_Mini & DivergeJM Nyquist keymaps to QWERTY, DVORAK or COLEMAK via the ADJUST layer.
Updated ReadMe files accordingly.
* Fix base layout diagram for Terminus_Mini
Remove split from diagram
* Changed the R operators to SEND_STRING, rather than keypress macros
* Added Dvorak to the QFR_JM keymap
* fixed duplicate row in Nyquist keymap
* Fix readme - LAlt location on mouse layer
* Set EE_HANDS to allow either Nyquist hand to work as master.
* Update R operator strings, clean up layering for terminus_mini, QFR_JM and DivergeJM
"<-" to " <- "
"%>%" to " %>% "
Also played around with the layering, removed unnecessary TAP_TOGGLE for LOWER and shuffled FUNCTION and MOUSE momentary actions to reflect layer order.
* Update bottom alpha row to output symbols on LOWER
This row now outputs the following (z -> /) when in the LOWER layer:
<-
%>%
{
[
`
|
]
}
.
/
* Updated readme files for QFR_JM, terminus_mini & DivergeJM
QFR_JM readme reflects correct LOWER bottom row symbol output,
terminus_mini & DivergeJM reflect correct command line make instructions.
* Add media keys to QFR_JM LOWER - Replicate QFR default functionality
* Fix issue with Mouse layering
Stuck on mouse layer because the wrong macro was assigned to the 'exit layer' key. Reassigned that key.
* Changed " <- " to "<- " for QFR_JM, terminus_mini & DivergeJM
* Add "KC_MAKE" to userspace example
* QMK DFU bootloader generation (#2009)
* adds :bootloader target
* update planck and preonic revisions
* remove references to .h files for planck
* update preonic keymap
* only add keyboard.h files that exist
* add production target
* hook things up with the new lufa variables
* update rules for planck/preonic
* back backlight key turn of status led when pressed
* add manufacturer/product strings to bootloader
* fix push script
* Added support for let's split kailh socket version (#2010)
* Added support for socket version of the let's split
* renamed files
* socket-version-works
* fix up lets_split keymaps
* fix up lets_split keymaps
* shrink preonic by a bit
* fix lets_split keyboards
* update travis script
* update travis script
* update version silencing
* - Fixed DK60 version in config.h
* - Updated dk60 readme with new QMK rules
* - Fixed wording in readme
* Added dbroqua layout for DZ60
I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).
With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.
Regards
* Updated dbroqua layout for HHKB keyboard
Added default configuration and alternate (swap gui/alt keys).
Save user choice in keyboard memory (like plank, thanks for this
feature!).
* adds :bootloader target
* update planck and preonic revisions
* remove references to .h files for planck
* update preonic keymap
* only add keyboard.h files that exist
* add production target
* hook things up with the new lufa variables
* update rules for planck/preonic
* back backlight key turn of status led when pressed
* add manufacturer/product strings to bootloader
* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware
* Fix terminus_mini & nyquist/DivergeJM readme files
Previously an outdated copy of the default readme. Updated to match the Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)
* Update makefiles to rules.mk
Renamed both Makefiles to rules.mk, removed references to makefiles
* Updated rules.mk
Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.
Also disabled Tap_Dance in both rules.mk files
* Moved terminus_mini to handwired
Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.
* New Frosty Flake layout for QFR TKL
Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.
* README fix & keymap update for 3 keyboards
Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.
Added TAPPING_TERM = 150 to config.h for all keyboards
Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.
* Update readme for QFR_JM to include make instructions
* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"
This reverts commit a45f264ada, reversing
changes made to 62349c3341.
* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""
This reverts commit eae54fb3be.
* Added QWERTY support to the QFR_JM
Implemented variable default base layer from the Planck default keymap.
* Update README to reflect QWERTY support
* Nyquist:DivergeJM - Update RESET location
Add a reset button to both hands, accessible when halves are disconnected.
* Typo fix
* Update DivergeJM
Switched master to Left hand,
Moved Reset key to a different location
* Added macros to send R pointer & dplyr pipe
Macros added as a string of keypresses, couldn't figure out how to get SEND_STRING to work.
* Added ADJUST -> QWERTY, DVORAK, COLEMAK
Re-implemented update_tri_layer fuctionality to reset base layer for Terminus_Mini & DivergeJM Nyquist keymaps to QWERTY, DVORAK or COLEMAK via the ADJUST layer.
Updated ReadMe files accordingly.
* Fix base layout diagram for Terminus_Mini
Remove split from diagram
* Changed the R operators to SEND_STRING, rather than keypress macros
* Added Dvorak to the QFR_JM keymap
* fixed duplicate row in Nyquist keymap
* Fix readme - LAlt location on mouse layer
* Set EE_HANDS to allow either Nyquist hand to work as master.
* Update R operator strings, clean up layering for terminus_mini, QFR_JM and DivergeJM
"<-" to " <- "
"%>%" to " %>% "
Also played around with the layering, removed unnecessary TAP_TOGGLE for LOWER and shuffled FUNCTION and MOUSE momentary actions to reflect layer order.
* Update bottom alpha row to output symbols on LOWER
This row now outputs the following (z -> /) when in the LOWER layer:
<-
%>%
{
[
`
|
]
}
.
/
* Updated readme files for QFR_JM, terminus_mini & DivergeJM
QFR_JM readme reflects correct LOWER bottom row symbol output,
terminus_mini & DivergeJM reflect correct command line make instructions.
* Add media keys to QFR_JM LOWER - Replicate QFR default functionality
* Fix issue with Mouse layering
Stuck on mouse layer because the wrong macro was assigned to the 'exit layer' key. Reassigned that key.
* Changed " <- " to "<- " for QFR_JM, terminus_mini & DivergeJM
