* Updated information on info.json and hopefully de-cluttered branch
* Updated default encoder settings
* Updated info.json for after to be in the proper order
* Fixed maintainer name
* added Keyboard Southpaw66
* Housekeeping, shorten urls
* Housekeeping
* Row matrix pins were flipped, fixed
* housekeeping, extraneous punctuation
* bug-fixing
* bug-fixing
* Layout macro fixed
* Layout macro fixed again
* Update and rename Southpaw66,c to southpaw66.c
* Rename Southpaw66.h to southpaw66.h
* Update config.h
* Update info.json
* Change Southpaw66 to southpaw66
made change to case in all instances in code except where critical, such as in url's.
* Rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* Update info.json
* Update keyboards/rpiguy9907/Southpaw66/readme.md
updated image url to point to lower resolution image.
* Update config.h
re-capitalized Southpaw66 in product name.
* Rename Southpaw66 parent folder to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Update keyboards/rpiguy9907/southpaw66/readme.md
* Update keyboards/rpiguy9907/southpaw66/config.h
By default the `i2c_master` driver for ChibiOS uses the B6 pin for
`I2C1_SCL` and the B7 pin for `I2C1_SDA`. However, the ChibiOS board
file used for the F401 Blackpill board (`ST_STM32F401C_DISCOVERY`)
configures B6 as `I2C1_SCL` and B9 as `I2C1_SDA`, and if that
configuration is left unchanged, enabling the `i2c_master` driver
results in having two pins (B7 and B9) configured as `I2C1_SDA` at the
same time, which does not work properly (experimental results show that
the B9 pin still works as `I2C1_SDA` in that case, and the B7 pin does
not work).
Configure the B9 pin as an input with pull-up in `board_init()`, so that
the B7 pin can be configured as `I2C1_SDA` by the I2C driver.
* Add new keyboard Pan
Encoder switches still need work
* New keyboard Pan
Should be complete
* Split MCU selection into 2 revision folders
* [rgbkb/pan] Make requested changes for PR
Additionally, set DEFAULT_FOLDER to rev1, and default rev1
to atmega32a (as all shipped kits include an atmega32a)
* Apply suggestions from code review
* Fix default keymap typo
* add usb max power define
* Commit suggested changes
* Update keyboards/rgbkb/pan/config.h
* Apply suggestions from code review
Small copyright updates
* Apply suggestions from code review
* Personal keymap
- fix quoting in description
fix issue with userspace disabling audio
wip
Update keyboards/kingly_keys/little_foot/keymaps/yanfali/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/kingly_keys/little_foot/config.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Yan-Fa Li <yanfa.li@fireeye.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update massdrop/alt keyboard to fix Caps Lock LED flickering.
* Fix Caps-lock LED during underglow-only for massdrop/ctrl
* Update keyboards/massdrop/ctrl/keymaps/default/keymap.c
* feat: new keymapping for idobo
* fix: added licenses. converted int to uint8_t where applicable
* fix: addressed zvecr stylistic enhancements
* fix: replaced rgblight_sethsv with rgblight_sethsv_noeeprom
* First pass
* Add config options to docs
* Update some wording
* Slight tidy up of backlight caps logic
* Init pin to correct state
* Move init location
* Reverse default state
Specifically, the lgreen variable isn't used, and avr-gcc 8.x complains about this. To prevent it from being an issue, just set all of these led variables to be unused.
* add big spacebar default
* add rev1 big space
* add big spacebar default
* add rev1 big space
* Fixed copyright statements
Removed unused RGBRST keycode and bootmagic swaps
* Minor Tweak
* Refactor spacebar defines.
* Add TMO50 layout
* Rename Atreus keymap.
* Refactor Atreus for readability.
* Eliminate tapdance quote and tweak maltroff.
* Factor out tapdance.
* Add some fancy combos and keys.
* Remove combos for now because they cause pain.
* WIP visualizer
* Alternate method for reset
* WIP2 visualizer
* Layer text tweak.
* Add made-up layout Nortron as a combination of Norman and Maltron.
* Add backspace.
* Add Talljoe keymap to Prime E.
* Fix double-colon so it doesn't press enter if shift is released early.
* Use new make command.
* Bring some modern standards into code and add licenses.
* Remove QMK_KEYBOARD_CONFIG_H and fixup QMK_KEYBOARD_H.
* Move from `biton32` to `get_highest_layer`.
* Remove PREVENT_STUCK_MODIFIERS
* Update keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks
* Remove outdated Crkbd Ctrl key positioning info
* Add Left Alt key to Lily58 keymap
* Lily58 no longer overrides default TAPPING_TERM
* Refactor Crkbd keymap to use new community layout
* Fix underglow animations for Crkbd w/ Split Common
* Add initial Eco keymap
* Update outdated reference to Crkbd layout
* Add keymap links to userspace readme
* Add copyright notices to files changed in this PR
* add dp60 indicator mode
* update according to #7720
* added license header and move the ws2812 codes to a seperate c file
* fixed conflict with master
* nullbitsco/nibble: rework LAYOUT_all
... and update via keymap accordingly.
* compress info.json LAYOUT_all tree
Only changes the white space.
* rebuild info.json LAYOUT_all tree
Note: this commit makes the visual layout the ANSI layout with a split left Shift, instead of being the same as the ISO layout.
* unify code styles
Make logically-unchanged code blocks similar in appearance to logically-changed blocks.
* correct LAYOUT_iso key sequence
Move ISO Enter's object to its proper place.
* exent VIA support
* minor cleanups
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added ad/freebird60.
* Moved freebird60 keyboard. Added VIA keymap.
* Updated `keebsforall/freebird60` README to include image.
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Added GPL2+ compatible license header.
Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>
* Firmware initial commit, still has a few bugs - mainly rotary encoders do not work and needs cleaning up
* Fixed the volume control issue and limited the RGB brightness (can be really bright), added the ability to switch LED mode with left encoder click, and added via support (untested)
* Remove define that should go in config.h
* Removed define that should be in config.h
* Removed LTO_ENABLE as suggested - has issues on ARM
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added the correct define for OLED screen size
* Applied suggested change to remove description
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested change to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/rocketboard_16/rocketboard_16.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested comments
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested changes to rules file
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested change to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added info.json for QMK configurator
* Update readme.md
* This change makes the firmware work... through magic... seriously, no idea - but it works!
* Updated dimming step, OLED functionality, and rules for formatting
- Changed the dimming step size for smoother dimming with the reduced range
- Added lots of OLED functionality - QMK logo and title at top, num/caps/scroll lock status, and backlight brightness level
- Updated the rules.mk file to comply more closely with the formatting guidelines
* Fixed tab issues
Co-authored-by: Ryan <fauxpark@gmail.com>
* Updated to use bootmagic lite with the key that usually turns rgb on/off
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Fixed] remove this code cause it's useless.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
KiCad is a cross platform, free and open source electronics design
automation (EDA) suite. It was used to create ANAVI Macro Pad 8.
This keymap contains 2 layers for KiCad hotkeys and a 3rd layer
for controlling the backlighting and the underlighting.
- Layer for KiCad Schematic hotkeys:
m - to move selected component
r - to rotate selected component
w - to wire components
v - to edit component value
F1 - zoom in
F2 - zoom out
F4 - zoom center
- Layer for KiCad PCB layout hotkets:
m - to move selected component
r - to rotate selected component
x - to route a new track
v - to add a via
F1 - zoom in
F2 - zoom out
F4 - zoom center
Signed-off-by: Leon Anavi <leon@anavi.org>
OBS keymap for ANAVI Macro Pad 8 with the following shortcuts:
- Shortcuts useful for switching scenes on the 1st row:
Hold Left Control, Shift, Alt and GUI and press F9
Hold Left Control, Shift, Alt and GUI and press F10
Hold Left Control, Shift, Alt and GUI and press F11
Hold Left Control, Shift, Alt and GUI and press F12
- Center to screen: Ctrl+D
- Fit to screen: Ctrl+F
- Move source to top of sources list: Ctrl+Home
Signed-off-by: Leon Anavi <leon@anavi.org>
* Added basic via keymap
* Added via keymaps and changed config Product and Vendor ID
* Update keyboards/exclusive/e65/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/exclusive/e65/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Refactored via/keymap.c to use LAYOUT_all
* Refactored e65.h to remove nested matrix layouts
* Previous commit missed LAYOUT_65_ansi_blocker. Fixed
Co-authored-by: Ryan <fauxpark@gmail.com>
* docs(massdrop alt): update link to loader releases
Update the link to the Massdrop Loader releases page to point to the releases index rather than release 0.0.1
* docs(massdrop ctrl): update link to loader releases
* KBDfans Bella Soldered: add readme
* add image to readme
* tidy-up Configurator layout data
Key positioning was not true to the assembled board.
* reduce readme redundancy
* Add files via upload
* Add files via upload
* Add files via upload
* Update config.h
* Update rules.mk
* Update config.h
* Update config.h
* Update config.h
* Update config.h
* Add files via upload
* Removing duplicate files
* Resolve VID and PID collisions as requested
Taken the 0xFEED for vendor ID as suggested in vendor documentation and an available PID
* add a GPL2+ compatible license header as requested
Added the GPL2+ header to keymap.c file
* Update keyboards/genone/eclipse_65/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/eclipse_65.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/eclipse_65.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Corrected items on rules.mk as suggested
Thanks for the comment
I removed suggested items, corrected some spacing issues, and added suggested items.
* Deleted genone_main.c file
Thanks for the comment.
Deleted genone_main.c file as requested
Co-authored-by: Ryan <fauxpark@gmail.com>
* my alice community layout
* add LAYOUT_alice support to projectkb/alice/rev2
* add addition BSPC key to default layout
* add define to support LAYOUT_default
OBS keymap for ANAVI Macro Pad 8 with the following shortcuts:
- Shortcuts useful for switching scenes on the 1st row:
Hold Left Control, Shift, Alt and GUI and press F9
Hold Left Control, Shift, Alt and GUI and press F10
Hold Left Control, Shift, Alt and GUI and press F11
Hold Left Control, Shift, Alt and GUI and press F12
- Center to screen: Ctrl+D
- Fit to screen: Ctrl+F
- Move source to top of sources list: Ctrl+Home
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add pteron44
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review part 2
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Zoom keymap for ANAVI Macro Pad 8 with the following shortcuts:
* Alt+V: Start/stop video
* Alt+A: Mute/unmute my audio
* Alt+M: Mute/unmute audio for everyone except the host
* Alt+S: Start/stop screen sharing
* Alt+R: Start/stop local recording
* Alt+P: Pause/resume recording
* Alt+C: Start/stop cloud recording
* Switch to 2nd layout to control backlighting and underlighting
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add NIBBLE keyboard
* Update VID for VIA compatibility
* Add QMK PR feedback
* Update matrix_init_remote_kb()
* Update with requested changes
Clean up config, makefile rules, and keymap files
* Update with changes for unified ANSI/ISO layout
* Add NO_USB_STARTUP_CHECK note in readme
* Add license info, update with PR changes
-Refactor encoder, via_extras code
-Refactor VIA specific code to live in keymap folder
-Remove non-inclusive naming in remote keyboard.c/h
-Add documentation to remote_keyboard.c
-Add compiler check for vusb_detect for non-avr micros
* Fix print formatter in encoder handler
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Small PR updates
-Remove unneded matrix code from nibble.c
-Clean up include code in nibble_encoder.h
* Update Big LED headerfile
-Declare Big LED functions in header file (derp)
* Update keyboards/nullbitsco/nibble/nibble.c
-Update with drashna's suggested CAPS LED code change
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/nullbitsco/nibble/rules.mk
-Update with drasha's suggested makefile formatting changes
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Fix caps_lock typo
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Initial userspace
* DZ60 map
* Quefrency map
* Sinc map
* Set up MAKE key for all personal maps
* Light userspace cleanup
* Formatting and comments zzz...
* Licensing and userspace README
* Swap: EXTRAFLAGS -> LTO_ENABLE in userspace rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Improve KC_MAKE: KC_ENT -> \n
Co-authored-by: Ryan <fauxpark@gmail.com>
* Swap left grouping on _FN for pairs
* Add '?' -> backslash on _FN
* Remove commented code
* Organize lines in rules.mk
* Add left hand scroll keys
* Move configs to config.h
* License blitz
Co-authored-by: Ryan <fauxpark@gmail.com>
* initial port of keymap to latest qmk version
* forgot to add space cadet shift, fixed
* corrected colors and added color macros
* added custom rgb matrix effects
* enabled extrakey
* updated readme
* Added GPL3 License Headers
* Added images to readme
* clang-format
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* renamed README.md to readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add IDOBAO ID87.
* Layout changes.
* Updated rules.mk
* Implemented capslock led.
* Updated readme to new version.
* Fixed the info.info.json for the new layout.
* Updated RGB number config.h.
* Update rules.mk to try and line up nicely.
* Fix via keymap.keymap.c
* Fix all the auto-created labels.
* Update keymaps again.
* Add additional RGB commands.
* Update keyboards/id87/info.json
Format update.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/readme.md
Remove quotations.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/readme.md
Change Flash to Flashing
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/rules.mk
Alignment Fix
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/info.json
Remove qmk_converter link meta.
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Adding my keymap
* Add a starter keymap for kyria
* Updated keymap
* Add auto shift, tapping modifications and gravatar oled bitmap
* Add flashing helper scripts
* Updates to my keymap
* Enable raw hid and rgblight sleep
* Cleanup
* Updated keymap and board features
* Remove some RGB modes for space
* Start working on a miryoku-like keymap.
This adds homerow mods to my keymap on the base layer and adds
a game layer that doesnt have them
* more work on keymaps
* Fine tuning home row mods
* update keymap
* Keymap update
* add split transport
* keymap
* cherry pick from develop
* merge develop
* fix
* keymap iterations
* Refactoring
* continued refactoring
* messing with rgb
* update layer coloring
* continued refactoring
* more features
* modifier color
* Move stuff to userspace
* Moving stuff out to userspace
* refactoring into userspace
* More refactoring
* Fixing some errors in the keymap and changing the oled output
* Sync zen1 keymap to my userspace config
* Update copyright notices and revert transport.c to master
* Swap tab and esc
* Remove a file accidentally created
* Use LTO_ENABLE to turn on Link_Time_Optimization
* Drop modtap thumbs on game layout
* Update game keymap
* More iteration on the game keymap
* Add oled indications of kitty and i3 mod
* Promote colemak to default
* Update tapping term for modtap keys
* Add per key tapping term
* Use left modifiers on right side
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
* Update keyboards/melgeek/mj61/mj61.c
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
* Update keyboards/melgeek/mj61/rev1/config.h
* Update keyboards/melgeek/mj61/rev1/rules.mk
* Update keyboards/melgeek/mj61/mj61.c
* Update keyboards/melgeek/mj61/mj61.c
* [Keyboard] Support MoJo75 which is a 75% Hotswap RGB keyboard
* Update melgeek/mojo75 vid and pid
Add melgeek/mojo75/rev1/rev1.c
* Update MelGeek mojo75 VIA layout
* Add my own keymap
* Layer 0: Workman
* Layer 1: RSTHD (my own take on it)
* Layer 2: Mouse
* Layer 3: Navigation
* Layer 4: Symbols right
* Layer 5: Symbols left
* Layer 6: Fn keys
* Layer 7: Numbers
* Layer 8: Vim and misceallaneaous accessible from any other layer
* Move the current code to a 0.1 folder in preparation for upcoming changes
Version 0.2 is currently being prototyped and uses an arm chip which
will need its own firmware.
There is also the Ferris sweep which uses a pro-micro compatible board
which will need its own directory.
* Move Ferris out of handwired and into the light
The keyboard is now well out of the prototype phase as tens of them have
been produced and acquired by various people.
With 0.2 coming out, adoption is going to increase again as the board
will be available for sale at some recognized vendors.
Now is probably a good time to recognize its status as more than a
prototype :)
* Add code for the Ferris Sweep (a.k.a cradio)
The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB.
It has the key layout of a Ferris and uses a pro-micro connected to the
switches via direct pins so that diodes are not needed and the soldering
is minimal.
With their blessing, I took the code for it from DPB's own repo:
https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio
and did some adaptations such as removing commented out code, enabling
EE_HANDS and mouse keys for consistency with my existing Ferris code.
* Fix indentation in rules.mk
* Fix indentation in sweep's config
* Remove unnecessary lines from sweep's rules.mk
* Remove unnecessary lines from sweep's rules.mk
* Rename 0.1 to 0_1
This avoids the dot looking like the separation between a filename and
its extension.
In the same commit, bring matrix.c to the 0_1 folder as this was needed
for the code to compile properly (matrix.c is referred to in the readme
under `0_1` and is specific to that revision of the firmware).
* Update copyright statements for Sweep
* add kabraxcis keymap
this is a user keymap for a member of my group-buy. this is the creation commit
* add voaraq keymap
this is a user keymap for a member of my group-buy
* update kabraxcis keymap
* add licenses
* basic keys working
* more stuff
* more stuff
* empty upper layers
* more stuff
* cleanup
* more stuff
* add the letter 'j'
* add '0' to layer 4
* implement umlauts and eszett with menu key as compose key
* add comment
* renamed layout
* change copyright notice
* add separate readme file
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
* added spooky keyboard t
o boardsouce folder
* restoring to clean start I think
* added back in my files for this keyboard
* Update keyboards/boardsource/holiday/spooky/config.h
* Update keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c
* Update keyboards/boardsource/holiday/spooky/readme.md
* Update keyboards/boardsource/holiday/spooky/spooky.h
* updated all keymaps to support 2x3 ortho
* Apply suggestions from code review
* move drakon to jagdpietr directory
* Updates
Recommended changes implemented in this commit due to progress loss in last commit
* Update vusb
* Update keyboards/jagdpietr/drakon/drakon.c
* Add nordic keymap
Changes from default:
- Change button right of `LSHIFT` to `KC_NUBS`
- Add some more keys to the second layer.
* Add sleepmode functionality
Added a sleepmode, this turns of the rgb_matrix if no key was pressed for x minutes. Not default on, so you have to enable it by defining `SLEEPMODE_ENABLED`.
* Move all sleepmode config to config.h, rename keymap
- Move all configurations for sleepmode to keymap config.h
- rename keymap to include reference to it having sleepmode (suggestion from guy the discord-server)
- add copyright in config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* [Keyboard] Support MJ64 which is a 60% Hotswap RGB keyboard with arrows
and the size of left shift is 2.25U
* Update keyboards/melgeek/mj64/mj64.h
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/rev2/rules.mk
* Update keyboards/melgeek/mj64/rev1/rules.mk
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/rev1/config.h
* Update keyboards/melgeek/mj64/rev2/config.h
* Update the VID and PID in mj64/config.h
add the rev1/rev1.c
add the rev2/rev2.c
* [Keyboard] GH60 v1.3 Support
* clean up info.json
Update key sizes and positioning.
* add readme
* add image to readme
* fix up info.json LAYOUT_all
* add LAYOUT_60_ansi
I'm guessing at this based on a photo of the PCB. Chances are high that this isn't fully functional.
* add matrix block comment to v1p3.h
* add default_ansi keymap
* add keymap readme files
* fix LAYOUT_60_ansi macro
* enable 60_ansi Community Layout support
* add layouts for 60_ansi_arrow
Add LAYOUT_60_ansi_arrow and LAYOUT_60_ansi_arrow_split_bs macros. (The user helping me test runs the split Backspace variant.)
* add Tsangan, HHKB, and 64_ansi layout macros
* add factory keymaps and layout info
* update copyright headers
I mean... if someone's gotta "own" this code...
* fix broken factory_* keymaps
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add VIA code to ergoTravel, VendorId changed to allow via
* Update LTO_ENABLE for via
* Accept comments from the QMK PR discussion
* Restore original rules.mk from qmk master, update via rules to remove redundant bootmagic
* rules update
* find and use unique VID without qmk. Used 0x4A50, did not find clash
* Removed unused via layer
* Reset hard to last clean commit, redo changes for Hex Translation and Enum
* on behalf of VashtaNerada commiting his code to get caps lock led working on the soldered E8d E8.5
* Update keyboards/exclusive/e85/soldered/soldered.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add VIA keymap for EVE Meteor.
* Remove bootmagic flag and add vendor/product IDs.
* Update keyboards/eve/meteor/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Increment EVE Vendor ID to be unique.
* Change product IDs.
Make the EVE Meteor IDs both unique and somewhat logical based on the product name.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add VID/PIDs to ErgoDox EZ
* Add VID/PIDs for Planck EZ and Glow revision
* Make names consistent
* fix typo in docs
* Move LED config back, for maximum compatibility
* Add revisions for ErgoDox EZ boards
* Fix embarassing typo
* Typooooo
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update Licensing info
* Update Moonlander default keymap to match Oryx's default
* Fix formatting based on suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Make indicator LEDs more configurable
* Update default keymap
* Handle older eeprom settings
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] Support MJ63 which is a 60% hotswap RGB keyboard with arrows
and the size of left shift is 2U
* Update keyboards/melgeek/mj63/mj63.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/mj63.c
Co-authored-by: Joel Challis <git@zvecr.com>
* [Keyboard] MelGeek MJ63
* Change the VID and PID
* move the mj63.c to the rev1/rev1.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Initial support for the Keyboardio Atreus
Many thanks to noroadsleft for reviews & suggestions.
* Add QMK Configurator layout support
* Update the fn layer of the Keyboardio Atreus to the new layout.
Previously this was using the Classic Atreus layout.
* Implement noroadleft's changes from #8492
* Follow Erovia's recommendations
qmk/qmk_firmware#8492
* Correct braces
* Change correct rules.mk
* Remove comments
* Fix BOOTMAGIC_ENABLE
I had edited the wrong file earlier.
* Remove comment
* Updates rules.mk
Thank you noroadsleft.
Co-authored-by: Gergely Nagy <algernon@keyboard.io>
Co-authored-by: Phil Hagelberg <phil@hagelb.org>
* Move existing files out the way
* Convert to community layouts
* Add smk65/revf support
* Disable stuff by default
* Update IDs for via
* Align LAYOUT macros for community layouts
* Align LAYOUT macros for community layouts - Fix configurator ordering
* Update via keymap
* remove stub _kb function
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add niu mini dye sub keymap
* Fix spacing
* Fix for blank spacing on layout
* Remove unused code
Co-authored-by: Joel Challis <git@zvecr.com>
* Remove audio and console settings
Co-authored-by: Joel Challis <git@zvecr.com>
* Updates rules and readme
* Add license GPL2 to keymap
Co-authored-by: Joel Challis <git@zvecr.com>
* Clean LeftyNumpad code
* Fix typo in recently renamed file
* Fix issues with keymap layout
* Initial PR Feedback fixes
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add fixes based on PR feedback
* Update keyboards/handwired/leftynumpad/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add maja capslock indicator
add maja capslock indicator
* Update keyboards/kbdfans/maja/maja.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Basic keymap parsing finally works
* Add 'keymap.json' creation to the qmk.keymap module
* Add tests and fix formatting
* Fix/exclude flake8 errors
* Convert keymap.c to valid keymap.json
* Fix some errors
* Add tests
* Finalize keymap.json creation, add json template
* Add docs
* Move pygments to the standard requirements
* Add support for nameless layers, fix tests
* Fix things after rebase
* Add missing 'keymap' value.
* Fix missing layer numbers from advanced keycodes
Buckwich noticed that if the advanced keycode / layer toggling key
contains a number, it goes missing.
Now we properly handle them.
Thx for noticing!
* Apply suggestions from code review
* fixup tests
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: skullY <skullydazed@gmail.com>
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality
* Move keymaps to community layouts
* Remove keymaps from userspace readme.md
Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* add support for ymd75 rev3
* Update keyboards/ymd75/rev3/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ymd75/rev3/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove DESCRIPTION
* only apply offset for rev3
Co-authored-by: Ryan <fauxpark@gmail.com>
* Created folder structure and blank files
* Update the yugo_m initial blank files
* Add yugo_m default keymap
* Update yugo_m info.json
* Fix yugo_m keymap.c
* keymap.c update
* Changed subfolder name
* File names
* Fixed lock LEDs problem
* Returned old subfolder name; LEDs fix
* Activated anti-ghosting feature in config.h
* Update readme.md
* Changed LAYOUT to LAYOUT_all
* Updated keymap.c
* corrected LAYOUT to LAYOUT_all in info.json
* Rewritten readme.md according to the template
* Removed backslashes from keymap.c
* Fixed readme.md
* Fixed readme.md again
* Tidying up readme.md
* Tidying up comments and readme.md
* Removed a line from rules.mk
* Update keyboards/yugo_m/model_m_101/model_m_101.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Removed chconf, halconf, mcuconf
* Updated LED control
* Update keyboards/yugo_m/model_m_101/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Updated readme.md, there was an outdated info
* Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Nidzo Tomic <tomicn8@hotmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initializing Boardwalk layout
* rules.mk newline
* config.h newline
* qwerty num toggle -> tap-toggle
* errant K, and _LOWER momentary toggles
* Lack of autosave sucks
* Converting to HHKB layout
* TT(_NUM) added to num layer
* Final updates for Boardwalk initialization
* Final refinements
* newline
* Removal of extra includes
* Update keyboards/boardwalk/keymaps/niclake/config.h
#pragma once
* Removing comment block from rules
* Updates to my layout
* WIP working on new keymap
* tweaking keymap
* updated keymap
* cleaned up a little bit
* New preonic keymap
* my preonic keymap
* added mac layout
* preonic map update
* cleaning up old repo
* cleaning up to match upstream
* more cleanup
* removing old keymaps
* Added BM60 Poker
* Apply suggestions from code review
* Added license
* updated license
* updated license
* Fixed remaining licenses and added layout to rules
* added replacement pcb for the matrix cain keyboard
* update usb descriptor
* fixed led polarity
* Update keyboards/matrix/cain/cain.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/matrix/cain/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* rename from cain to cain_re
* Update keyboards/matrix/cain_re/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
