opensteno_qmk/keyboards/ergodox_ez/readme.md
Seebs 39d3d92364 Allow multiple process_record() calls per scan
This is particularly relevant for, e.g., the ergodox EZ and
other keyboards with slow scan rates. Without changing the API or
behavior of individual process_record() calls, we allow a
configuration flag to make multiple calls in a single scan.

This will probably have miniscule effects on non-steno users,
and it's not enabled by default for any keyboards. Added note
about it to ergodox README.

Signed-off-by: seebs <seebs@seebs.net>
2017-11-21 00:20:52 -05:00

1.1 KiB
Raw Blame History

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make keymapname, for example make default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

  • Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.